Lot of 20 Stryker Single Port Manifold REF 700-15 DISCLAIMER: The item is in its original condition and no alterations have been made to the item. The item has been properly stored and handled, following the manufacturers recommendations. The item comes with the accessories specifically mentioned in the description or shown in the pictures. This item is not a food or medical product that has expired. This item does not appear to be damaged or mishandled. To the best of seller’s knowledge the item has not been recalled. FDA REGULATION AND CERTIFICATION: · The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. · If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health:
One Touch Ultra Strip is a part of One Touch device. When used with One Touch meters, these strips measure the concentration of blood glucose by self-testing for both professional and home use. Salient Features: Automatically draws blood into the test strips in a painless manner Fast, painless testing For quick and accurate results Pack Size: 50 strips & 10 strips Warranty: 6 months Directions For Use: OneTouch Ultra Strips are used with the OneTouch Meter for quantitatively measuring glucose in fresh capillary whole blood These Strips and meter are intended for self testing outside the body (in vitro diagnostic use) by people with diabetes at home and health care professionals in the clinical setting, as an aid to monitor the effectiveness of diabetes control OneTouch Ultra Strips and meter are for use on the finger, palm, and forearm Safety Information: Each strip intended for single one time use Keep out of the reach and sight of the children Dispose the used strips properly Store in a cool and dry place
Fully-automatic WEB Bag Aseptic Filling Machine | Bag in Box Aseptic Filler This Fully-automatic WEB Bag Aseptic Filling Machine | Bag in Box Aseptic Filler is designed for aseptically filling spout-prepared aseptic bags with sterile fluids like natural juice, concentrate, vegetable juice, fruit syrup, fruit jam, magma beverage, dairy product and pharmaceutical. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, sterilization, decapping, filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. Features: 1) Continuous bags feed and fully-automatic. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6) Employed decapping confirmation system ensures filling will not work before decapping and this guarantees the sterile room not to be polluted by the fluid. 7) Perfect-design filling system ensures reliable filling. 8) Multiple-step sterilization ensures a true aseptic filling. 9) Decapping, filling and capping parts move in an enclosed overpressure steam room which ensures the sterile conditions. 10) A pressure sensor working with a pumping system ensures the stable overpressure in the sterile filling chamber. 11) Compact construction. 12) Reliable and in a high standard. Most components are German branded. 13) Designed with CIP (Clean-in-Place) function and circuit connection. 14) New technology ensures no condensed water dripping onto bags. Specifications: Applicable bags: pre-cut continuous module or WEB type, 1-inch-spout prepared, 3-25 litres aseptic bags. (Spout is called Gland or Flange too.) Filling capacity: 300-350 bags/hour for 10 litres Power: 1.5 KW Compressed air: 6-8 bar, 1.5 m3/h. Food-grade steam: 5-8bar, 36kg/h Economic Semi-automatic Single-head Bag in Box Aseptic Filling Machine and Double-head Bag in Box Aseptic Filler available.
This Fully-automatic WEB Bag Aseptic Filler | Bag in Box Aseptic Filling Machine is designed for aseptically filling spout-prepared aseptic bags with sterile fluids like natural juice, concentrate, vegetable juice, fruit syrup, fruit jam, magma beverage, dairy product and pharmaceutical. It features fully-automatic by employing PLC and touch screen control system. The whole process of continuous bags feed, sterilization, decapping, filling, capping, cutting apart from continuous bags and transiting to the conveyor can be completed automatically, no human operation required. Features: 1) Continuous bags feed and fully-automatic. 2) Easy to use. The touch-screen control system makes operation easy. 3) Self-test and protecting function. 4) An electromagnetic flow meter system employed improves filling precision and truly achieves the quantitative filling. 5) Grade 304 stainless steel body and 316L stainless fluid-contact parts. 6) Employed decapping confirmation system ensures filling will not work before decapping and this guarantees the sterile room not to be polluted by the fluid. 7) Perfect-design filling system ensures reliable filling. 8) Multiple-step sterilization ensures a true aseptic filling. 9) Decapping, filling and capping parts move in an enclosed overpressure steam room which ensures the sterile conditions. 10) A pressure sensor working with a pumping system ensures the stable overpressure in the sterile filling chamber. 11) Compact construction. 12) Reliable and in a high standard. Most components are German branded. 13) Designed with CIP (Clean-in-Place) function and circuit connection. 14) New technology ensures no condensed water dripping onto bags. Specifications: Applicable bags: pre-cut continuous module or WEB type, 1-inch-spout prepared, 3-25 litres aseptic bags. (Spout is called Gland or Flange too.) Filling capacity: 300-350 bags/hour for 10 litres Power: 1.5 KW Compressed air: 6-8 bar, 1.5 m3/h. Food-grade steam: 5-8bar, 36kg/h Economic Semi-automatic Single-head Bag in Box Aseptic Filling Machine and Double-head Bag in Box Aseptic Filler available.
Cardinal health 200 gloves.
Cardinal health examination gloves.
Main features: 1. Max. Sewing speed:1000 stitches per minute. 2. Memory:99 designs or up to 1, 000, 000 stitches. 3. Compact style, light-duty body, easy to operate, easy to move around wherever you want. 4. Can work on caps, t-shirts, polo shirts and so on. 1100*1249*1600mm
Stethoscope: Single-head stethoscope Dual-head stethoscope Stainless steel stethoscope II Neonate And Baby stethoscope Acrylic stethoscope timing stethoscope Standard Sprague Rappaport Stethoscope Cardioligy Stainless Steel Stethoscope 1pc in a color box.
Fingertip textured | Tested for use with various lab chemicals and chemotherapy drugs1 | FLEXAL level protection | Standard protection within High Use portfolio | Available in premium packaging configuration- Flexal with dispensing film | Not made with natural rubber latex | Ambidextrous | Powder-free | Color: Cornflower blue | Nominal fingertip thickness: 3.7mil (.10mm) | USP compliant2 | Footnotes and references: | *GHX/ HPIS D_MAT2015 | 1 Caution: Gloves used for protection against chemotherapy drug and laboratory chemical exposure should be selected specifically for the type of chemicals being used. | 2This Cardinal Health product helps healthcare facilities comply with the USP standard for the safe handling of hazardous drugs. Note: Review Safety Data Sheets (SDS) for the chemicals/ drugs being used to determine required level of protection.
Product name: Coverall type 3B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by bloodâ??borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. â?? Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength
Product Name: EU certified Isolation Gown Material: PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length: 120-140 cm Non-sterile sizes: M-XL blue color Packaging 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485
Product Name: Disposable pp mob cap Material: PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile
Product Name: Disposable pp mob cap Material: PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile
General Description: Type IIR surgical mask to fully protect the working environment, reduce the risk of infection and protect the respiratory system from potentially contaminated fluids. Technical specifications Product Name: 3PLY Surgical mask type IIR Material: 3-layer non-woven melt-blown fabric Bacteria Filtration level: > 98% Size : 17x9,5 cm; flat style Adjustable nose clip elastic earloops Colour: blue Non-sterile Single use, disposable Splash resistance Medical mask bioburden: 30 CFU/gm Surgical mask conforms to standards: EN14683. The disposable mask box should be marked with the manufacturer's name, EN14683 and CE marking. Surgical mask Certificate CE Registration : ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Disposable cap for medical facilities. Technical specifications Product Name : Disposable pp mob cap Material : PP 9-10 GSM/pc machine-made presence of elastic for fixing water resistant air permeability Non-sterile Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Disposable protective shoe covers for chemical and biological protection Technical specifications Product Name : Disposable CPE shoe cover Material : CPE 2.6g/pc machine-made Non-sterile Permeability for air and water vapour Elastic insert (at the ankle level) The ability to retain up to 99% of solid particles larger than 1 micron Material does not form pile and dust Anti-slipping sole Inseam: stitched Size : 36-42 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: The disposable dressing gown is intended for use in medical institutions during procedures and examination of patients. The assortment includes disposable gowns with a sleeve on an elastic band on buttons or velcro and procedural gowns with a sleeve on a cuff on buttons or Velcro. Technical specifications Product Name : EU certified Isolation Gown Material : PP+PE 42 GSM (Tolerance / + 2gms) Fluid proof fabric Serged sewn seams long sleeves with elastic cuff Back length : 120-140 cm Non-sterile Sizes : M-XL blue color Packaging : 10 pcs per inner bag. 100 pcs per carton Execution standard EN13688 and EN14126 test report by SGS Certificates CE from notified body(SGS) ISO13485 Product Measurements A: Length 120 - / + 3cm B: Width in whole 140 - / + 3cm C: Length of sleeves 59 - / + 2cm D: Depth of sleeves 27 - / + 2cm E: Width of shoulder 22 - / + 2cm F: Length of neck tie 35 -/ + 2cm G: Length of waist tie 180 - / + 5cm Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Non-fluid resistant respirator mask protecting against airborne pathogens. Anti-penetration high filtration mask Technical specifications Product Name: FFP2 Respirator with harness band Material : 4-layer non-woven melt-blown fabric Bacteria Filtration level: > 94 % Air permeability: > 2 mm H2O Shape : foldable without valve Fits most face shapes, without inspiration/expiration air-leakage Adjustable nose bridge strip (4 x 90 mm (w x l) (+/-10%)) Elastic ear straps, both fitting around the ears or optional fitting around the top of the head with support of harness band(included). white colour Non-sterile Single-use, disposable Each mask bares clear identification of (i) protection provided FFP2, (ii) which side to wear up (nose), (iii) manufacturer's name, and (iv) model reference Conforms to standards: EN 149: 2001/FFP2. The disposable respirator should be marked with the manufacturer's name, EN 149: 2001/FFP2 and CE certification number. Certificate CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions: As indicated by supplier Packaging and labelling: Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type and performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
General Description: Spray/aerosol-penetration resistant, biohazard-protective coverall, for use in EVD patient-isolation units for infection prevention and control against viral penetration. Technical specifications Product name: Coverall type 4B/5B/6B Elasticated hood around face. Elasticated cuffs and ankles. Elasticated sleeves. Taped seams. Zipper with re-sealable flap protecting leakage through seams. Stitched-in neck label indicating the type and performance of the suit against the below mentioned standards. White color with blue tape Material: 65 GSM Non-woven PP+PE 65 GSM +/- 2gsm Lightweight, do not contain rubber/ latex. Antistatic treated on both sides. Fabric is Infective agent tested against viral penetration at minimum 1.75kPa (class 2) (or equivalent international standard) Non-sterile Single Use, disposable Size: M-XL Conforms to standards below: European Directive 89/686/EEC on personal protective equipment Category III: Chemical protective coverall, comply with Type 4B/5B/6B including below standards. EN 13034:2005+A1 EN 14605 EN ISO 13982-1 EN 1073-2 EN ISO 13688 EN 1149-5 Barrier to infective agent standards: EN 14126:2003 certified passing infectious agent test according to ISO 16604:2004 (Resistance to penetration by blood borne pathogens using bacteriophage Phi X 174) standard at minimum exposure pressure of 1.75kPa (class 2) (or equivalent international standard) Performance requirement ISO standards: EN 340 General requirements EN ISO 17491-4: 2008 (supersedes: EN 468 mod. Spray aerosol test) EN 14325 Test methods & performance classification EN ISO 3758 (ISO 3758) Textile care symbols EN ISO 13935-2 Seam strength Certificates CE from notified body ISO13485 Supplied with Supplier's instruction for use Shelf life : As indicated by supplier Storage conditions : As indicated by supplier Packaging and labelling : Individually packaged in a transparent plastic bag. Labelling of the primary packaging displays, at least: product name, product reference, manufacturer name, size, type, coverall performance testing information against the mentioned standards. Information for particular storage conditions (temperature, pressure, light, humidity, etc.), as appropriate (or equivalent harmonised symbol), if applicable. All indicated at least in English
Model No. & Name - Shoe cover Material - Fabric: PP a. FOB Shanghai Price USD/pc - US$0.090 Estimate CIF by Air Price USD/pc - US$0.329 Order Quantity - 100,000 Pcs b . FOB Shanghai Price - US$0.089 USD/pc Estimate CIF by Air Price - US$0.327 USD/pc Order Quantity - 300,000 c . FOB Shanghai Price - S$0.085 USD/pc Estimate CIF by Air Price - US$0.325 USD/pc" Order Quantity - 500,000 Pcs d . FOB Shanghai Price - US$0.084 USD/pc Estimate CIF by Air Price - US$0.323 USD/pc Order Quantity - 1,000,000 Pcs Packing - 1000pcs/carton G.W:10kg/carton Ctn size (cm) - 50*30*31 Payment Term - 50% T/T in advance,50% before shippment, LC, can be negotiated "Vaildity of price" - 3 month "Delivery Time - 5 - 15 Business Days Depends on the Order
