1000.00 AISI 304 - STAINLESS STEEL - WITH LID SIZE: 125X330 mm EXWORKS PRICE: USD 27.00 1001.00 AISI 304 - STAINLESS STEEL - WITHOUT LID SIZE: 125X330 mm EXWORKS PRICE: USD 24.00
GRP Gel coated, texturized, high gloss and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.
1010.00 AISI 304 - STAINLESS STEEL WITH LID SIZE: 125X330 mm EXWORKS PRICE: USD 24.00 2010.00 SAE 1020 - GALVANIZED CARBON WITH LID SIZE: 125X330 mm EXWORKS PRICE: USD 16.00
1008.00 AISI 304 - STAINLESS STEEL WITH LID SIZE: 100X280 mm EXWORKS PRICE: USD 18.00 2008.00 SAE 1020 - GALVANIZED CARBON WITH LID SIZE: 100X280 mm EXWORKS PRICE: USD 14.00
1002.00 AISI 304 - STAINLESS STEEL WITH LID SIZE: 100X250 mm EXWORKS PRICE: USD 16.00 2002.00 SAE 1020 - GALVANIZED CARBON WITH LID SIZE: 100X250 mm EXWORKS PRICE: USD 13.00
1005.00 AISI 304 - STAINLESS STEEL WITHOUT LID SIZE: 100X250 mm EXWORKS PRICE: USD 11.00 2005.00 SAE 1020 - GALVANIZED CARBON WITHOUT LID SIZE: 100X250 mm EXWORKS PRICE: USD 7.00
1020.00 AISI 304 - STAINLESS STEEL EXWORKS PRICE: USD 8.00
1021.00 AISI 304 - STAINLESS STEEL EXWORKS PRICE: USD 8.00
1060.00 AISI 304 - STAINLESS STEEL SIZE: 310 mm EXWORKS PRICE: USD 11.00 2060.00 SAE 1020 - GALVANIZED CARBON SIZE: 310 mm EXWORKS PRICE: USD 7.00
GRP and Polyurethane panel. GRP sheets on both sides and polyurethane sheet inside. GRP and PU width can vary according to customer´s application. Excellent insulation, light weight and high resistance. Price ranges according to color, GRP and PU width. Size can be customized to attend client.
Fiberglass reiforced plastic sheets, coils and panels., polyurethane foam plates, hinges, latches and locks for truck bodies and cold rooms.
Product name: S type force sensor Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0/3.0 ± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10ºc Temp. Effect on zero 0.03% f.S. / 10ºc Input impedance 385±5 Output impedance 350±3 Insulation resistance 5000m/100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 ºc Operation temp range - 20 ~ 80ºc Safe overload 150% Ultimate overload 200 % Cable size 53m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product name: S type force sensors Features: 1. Miniature s type tension load cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature compression and tension load cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical specification: Rated output 2.0 â± 10% mv / v Zero balance ±2 % f.S. Non-linearity 0.05% f.S. Hysteresis 0.05% f.S. Repeatability 0.05% f.S. Creep (30min) 0.05% f.S. Temp. Effect on output 0.03% f.S. / 10âºc Temp. Effect on zero 0.03% f.S. / 10âºc Input impedance 350â±5, Output impedance 350â±5, Insulation resistance 5000m, /100vdc Recommended excitation 5-10v Maximum excitation 15 v Compensated temp range - 10 ~ 60 âºc Operation temp range - 20 ~ 80âºc Safe overload 120% Ultimate overload 150 % Cable size Ã?4ã?3m Wiring Red: + excitation black: - excitation Green: + signal white: - signal.
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Rated output 2.0 ± 5% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal
Product Name: Miniature S type Force Sensors Features: 1. The item LFS-02 is the S Type Force Sensor with high accuracy. 2. These force sensors offer high dynamic frequency. 3. The force sensors are small and it is easy to install them. 4. The force sensors utilize strain gauge technology. Applications: High-precision Miniature Compression Force Sensors are mainly applied in force measurement in small space installation, such as feeling tester for keyboard switch, pressure measurement for hot and cold lamination machine, and grasping force measurement for robotic hands. Technical Specification: Rated output 2.0± 10% mv/v Zero balance ± 2 % F.S. Non-linearity 0.05% F.S. Hysteresis 0.05% F.S. Repeatability 0.05% F.S. Creep (30min) 0.05% F.S. Temp. effect on output 0.05% F.S. / 10ºC Temp. effect on zero 0.05% F.S. / 10ºC Input impedance 350 Output impedance 350 Insulation resistance ?¥5000MΩ/100VDC Recommended excitation 5V Maximum excitation 10 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal RANGEABCMWeight 100-500N1619.16M4 200N-2KN264012M8 RANGEABCMDEWeight 5-30N1619.15M36.716.5 50N2619.16M47.516.5
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 10~5000kg Rated output 2.0 ± 10% mV / V Zero balance ±2 % F.S. Non-linearity 0.03% F.S. Hysteresis 0.03% F.S. Repeatability 0.03% F.S. Creep (30min) 0.03% F.S. Temp. effect on output 0.025% F.S. / 10ºC Temp. effect on zero 0.025% F.S. / 10ºC Input impedance 350±5Ω Output impedance 350±5Ω Insulation resistance �5000MΩ/100VDC Recommended excitation 5-10V Maximum excitation 15 V Compensated temp range - 10 ~ 60 ºC Operation temp range - 20 ~ 80ºC Safe overload 120% Ultimate overload 150 % Cable size �5�3m Wiring Red: + Excitation Black: - Excitation Green: + Signal White: - Signal capacity A B C D M Weight 10/20/30/50/75KG 63.5 50.8 12.7 19 M8*1.25�1/4-28� 100/200/250/300/500KG 76.2 50.8 19.1 25.4 M12x1.75�1/2-20� 750/1000/1500KG 76.2 50.8 25.4 25.4 M12x1.75�1/2-20� 2000/3000/5000KG 108 76.2 25.4 25.4 M18x1.5�3/4-16�
Product Name: S type Force Sensors Features: 1. Miniature S type Tension Load Cells are small and it is easy to install them. 2. The load cells with fully sealed structure offer good water resistance and high dynamic frequency. 3. The load cells are made of stainless steel and provide robust construction. 4. The load cells utilize strain gauge technology and provide high dynamic frequency Applications: Miniature Compression and Tension Load Cells are mainly applied in tension and pressure testing instruments, automatic equipments, and testing fields, such as insertion force test instruments, riveting machine, welding machine, hot & cold lamination machine, feeling tester for keyboard switch, and etc. Technical Specification: Capacity 50kg,100kg,200kg,300kg,500kg Rated output 2.0mV / V Zero balance ± 2 % F.S. Non-linearity 0.1 % F.S. Hysteresis 0.1 % F.S. Repeatability 0.1 % F.S. Creep (30min) 0.1 % F.S. Temp. effect on output 0.05 % F.S. / 10ºC Temp. effect on zero 0.05 % F.S. / 10ºC Input impedance 1100±5Ω Output impedance 1050â±3î© Insulation Â?¥5000mî©/100vdc Recommended Excitation 10 V Maximum Excitation 20 V Compensated Temp Range - 10 ~ 60 ºc Operation Temp Range - 20 ~ 80âºc Safe Overload 150% F.S. Ultimate Overload 200 % F.S. Cable Size Ã?3ã?3m Wiring Connection Red: + Excitation Black: - Excitation Green: + Signal White: - Signal Range, Size, Thread Lb, Kg, A, B, C, Mm, Inch 250-150, 100-750, 70, 19, 80, M10*1.5, 1/2-20 2000-3000, 1000-1500, 70, 25, 80, M12*1.75, 1/2-20 5k-10k, 2000-5000, 108, 25, 95, M18*1.5, 3/4-16 20000, 10000, 175, 51, 130, M30*2, 11/4-12 40000, 20000, 190, 60, 160, M39*2, 11/4-12
Detailed product descriptionï Load cell factory in china, canister compression load cell, analog load cell, stainless steel/alloy steel Categoriesïcanister and compression load cell Patternïcolumn cylinder type Transform typeïresistance strain Out-wireï4-wire Output signal typeïanalog type Materialïstainless steel/alloy steel Capacityï5t, 10t, 20t, 30t Ip ratingïip68 Applicationïtruck scale Accuracyïoiml c2 c3 Fob portïshanghai Terms of paymentïl/c
Detailed Product Description Weighing Controller IN-420 Interchangeable With ATRAX 420 PLUS INDICATOR RS485/RS232 signal output with Modbus rtu available 2 RELAYS(Optional) Free PC software with programable for all function Special Function Fast speed High accuracy Weight Controller Function: � Auto zero scale � Auto zero tracking � Normal weighing � Peak � Counting � Zero scale � Gross/Net � Tare � RS-232C � RS-485 � Print interface (PS805 Printer) Has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles per second and drives up to eight 350Ω or sixteen 700Ω load cells. With a SS304 stainless steel wash down enclosure is ideal for the food industry, agricultural industry, and industrial applications and COMPLY WITH STANDARD OF NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000. COMPLY WITH STANDARD OF NTEP III/IIIL, 10 000 COMPLY WITH STANDARD OF Measurement Canada III, 10 000; III HD 20 000 Material: Stainless steel SS304 IP Rating: IP66 LED 6-digit display Power Supply: AC adaptor, 100-240VAC, 50-60Hz Parameter and calibration settings are performed on the front panel LABRADOR computer software for parameter and calibration settings Units of Measurement: kg, lb Improper operation and fault indication Two way relay signal output Equipped with RS-232 and RS-485 connecting ports Print functions with programmable print format Built-in clock Weight Controlloer Data Enclosure MaterialStainless steel SS304 Units of Measurementkg, lb Working Humidity�90% RH Working Temperature-10°C to 40°C/14°F to 104°F Dimensions (mm)226mm x 71mm x 161mm Dimensions (in)8.9in x 3.7in x 6.34in Display TypeLCD Display Digits6 digits Digit Height25.4mm/1in Display Dimensions143mm x 41mm/5.6in x 1.6in Power SupplyAC adaptor, 100-240VAC, 50-60Hz IP Rating IP66 Division1, 2, 5, 10 Tare Range100% of Cn Maximum Number of Load Cells8350Ω or 16700Ω Maximum Power Consumption6VA Excitation Voltage5VDC ± 5% Fusible Link Fuse (slow blow)1A Communications InterfaceRS-232C, RS-485 Print InterfaceSerial interfacr
Instead of simco CM30 Chargemaster DC503 (Case type) 30KV Charging Generator Instead of simco CM30 Chargemaster Introduce DC506 case type charging generator is a kind of static application equipment. The static charging generator is composed of a static emitter (bar) and a DC high voltage power supply. For DC high voltage power supply, provide plasma launcher(bar) of negative (or positive) high voltage, to emit negative ions (or positive ions) and then add electronic charge(artificial charge) on an object (workpiece). The higher the voltage, the greater the effective range. It is widely used in non-woven fabric, film, painting, printing, flocking, sorting and biological engineering fields. It have many advantages like simple installation, fire protection, no electric shock and stable work. Safety Instruction 1,Please make sure that the equipment has been cut off before installation; 2,Equipment installation and operation must be performed by qualified electrical engineer; 3,Ensure that the equipment is properly grounded before the equipment is running. This is a necessary condition of the safe and effective operation; 4,Without written permission, please do not repair the equipment without authorization, otherwise the equipment will not be provided warranty service; 5,The troubleshooting need to be operated by professional engineer. Before checking the fault, please cut off the power supply. Control and maintenance The output voltage of charging generator can be proactively released to avoid unnecessary charge of the high voltage stored in the high voltage power supply and the surrounding objects, to minimize electromagnetic interference Instead of simco CM30 Chargemaster Installation: Input Voltage 100Vï½?240VAC Max Input Power 200 W Output Voltage 30 KV Max Output Current 5mA Max Output Power 150 W Output Polarity - Negative/+ Positive customize Working Temperature -15â??ï½?50â?? Output Stability Max Load 1ï¼? Output connector 1bit High voltage output Voltage control Stepless pressure regulation Remote control Support signal line remote switch control Weight 7 kg Size 500*400*200mm or 400*300*200mm 6. Protection This product has protection function of short circuit, over current and temperature alarm. 7. Maintenance 1,The device has no components that user can repair by themselves; 2,If the user replace the non-original parts, there is no warranty; 3,If need maintenance, please contact the manufacturer.