Sodium sulphate.Exporting
Soap, detergents, water treatment chemicals, mining chemicals, agricultural products like grains, rice and wheat, minerals like raw bauxite, barium sulphate, bentonite, hydrated lime, quick lime, petcoke, sulphur, ferric chloride, sodium silicate, nitric acid, acetic acid, chlorohexidine gluconate 20%, povidone iodine, cetrimide.
Sani Professional No-Rinse Sanitizing Multi-Surface Wipes No measuring, no mess. Convenient way to sanitize, one wipe at a time. Stop relying on chance for sanitization in your business, and start counting on an easy to use, simple routine that effectively removes 99.999% of the most common foodborne pathogens within 60 seconds. Take the steps to cut the risk of serious contamination with the new and improved Sani Professional No-Rinse Sanitizing Multi-Surface Wipes. Sani Professional No-Rinse Sanitizing Wipes are pre-moistened, ready-to-use wipes saturated with 380 ppm quaternary ammonium chloride. It is used to sanitize hard, nonporous food contact surfaces and non-food contact surfaces without requiring a rinse. The wipes are also disposable, which helps reduce the risk of cross-contamination. These wipes are large enough to cover big surfaces yet can be formed to sanitize small areas like thermometers. The non-corrosive formula leaves no harsh chemical residue virtually no spotting, and reduced streaking and filming. For use on the following types of surfaces: Aluminum, chrome, Corian, finished wood, finished polyurethane, Formica, glazed porcelain surfaces, laminated surfaces, laminated wood, metal, polystyrene, quartz, sealed cement, sealed granite, sealed synthetic marble, steel surfaces, sealed stone surfaces, stainless steel Do not use on natural marble, windows, unpainted wood, brass, clear plastic or colored grout. Instructions for use: Simply pull, wipe, and toss. Use a No-Rinse Sanitizing Multi-Surface Wipe to clean the surface, then use an additional wipe to sanitize. Wipe surface thoroughly to provide adequate treatment time of 60 seconds. Allow to air dry; no rinsing required. Features and Benefits EPA registered 9480-13 NSF registered D2 Food Code compliant Active Ingredients: Didecyl dimethyl ammonium chloride & Alkyl dimethyl benzyl ammonium chloride Effective in 60 seconds against: Escherichia coli, Staphylococcus aureus, Shigella boydii, Listeria monocytogenes Available in 2 sizes: 95 count, 7.75 x 9 wipe size and 175 count, 7.75 x 5 wipe size Precautionary Statements Keep out of reach of children Use on hard nonporous surfaces only Not for use on skin Physical or chemical hazard Combustible. Do not use or store near heat or open flame
White, crystalline, hygroscopic powder CAS : 6850-28-8 Product ID : TRISAC Molecular formula : C6H15NO5 Molecular mass : 181.19g/mol MP: 115-120C Flash Point: 165 - 173C Solubility: 80 - 100g/L at 20C Tris acetate is a white, crystalline, powder with a faint vinegar odor. Tris acetate, or tris(hydroxymethyl) aminomethane acetic acid salt, is a is highly soluble ammonium salt commonly used as a biological buffer ingredient biological, medical, and biochemical processes. One such process requiring pH control with tris acetate is the DNA extraction. DNA extraction is a pH-sensitive process which uses tris acetate buffer to keep the pH stable between pH 7 and 9. Tris-acetate is also used to prepare TAE buffer (tris-acetate-EDTA), which is used as a running buffer for DNA agarose gels.
Natural calcium carbonate, calcium carbonate powder, calcium carbonate for rubber industry, dolomite powder, barium sulphate, calcined kaolin, hydrated magnesium silicate powder, magnesium silicate for talcum powder, talc powder, talc powder for paint industry, china clay powder, china clay, calcined clay, micronize minerals, soapstone powder.
Natural calcium carbonate calcium carbonate powder calcium carbonate for rubber industry dolomite powder barium sulphate calcined kaolin hydrated magnesium silicate powder magnesium silicate for talcum powder talc powder talc powder for paint industry china clay powder china clay calcined clay micronise minerals soapstone powder.
Commodity: White Cane Sugar Icumsa 45 Rbu (Attenuation Index Units (Method # 4-1978)) Polarity At 20 Deg Centigrade: 99.80 Min. Sulphate & Ash Content: 0.04% Moisture: 0.04% Solubility: 100.0% Drt And Free Flowing Granulation: Fine Icumsa: Max. 45 Icumsa With Index Units Method No: 4619871 Sediments: None Color: Sparkling White Crop: 2020 Magnetic Particles: Mg/k 4. So2: 70 Mg/kg Maximum Radiation: Normal W/o Presence Of Cesium Or Iodine: Certified Smell: Free Of Any Smell & All Pathogens; Staph Aureas Reducing Sugar: 0.05% Max Subtance: Solid Crystal Maximum By Weight Max As: 1 P.p.m. Max Os: 2 P.p.m. Maximum Max Cu: 3 P.p.m.
Hand Antibacterial Wipes (80 pcs/bag ) NDC Code 77267-003-02 Package Description 80wipes (15*20cm) in 1 BAG 24 BAG/CTN EAN 6923645880032 Non-Proprietary Name: Benzalkonium Chloride Drug Facts Active Ingredient(s) Benzalkonium Chloride 0.13% Purpose Antimicrobial Agent Use Decreases bacteria on skin. Warnings For external use only. Do not use Do not use if you are allergic to any of the ingredients. Using this product do not get into eyes. lf contact occurs, rinse thoroughly with water. Stop use and ask a doctor if irritation or rash develops and continues for more than 72 hours. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away. Directions Tear open packet, remove wipe. Wet hands thoroughly with product and let hands air dry. Throw used wipe in trash. Do not flush. Other information Adults and children 2 years and over. Apply to hands. Allow skin to dry without Wiping. Children under 2 years. Ask a doctor before use. Inactive ingredients C12-14 Alkyl Dimethyl, Ethylbenzyl Ammonium Chloride, Alkyl Polyglucoside, Disodium EDTA, Propylene Glycol, Aqua.
Hand Antibacterial Wipes (10 pcs/bag ) NDC Code 77267-003-01 Package Description 10wipes (15*20cm) in 1 BAG 80 BAG/CTN EAN 6923645880032 Non-Proprietary Name: Benzalkonium Chloride Drug Facts Active Ingredient(s) Benzalkonium Chloride 0.13% Purpose Antimicrobial Agent Use Decreases bacteria on skin. Warnings For external use only. Do not use Do not use if you are allergic to any of the ingredients. Using this product do not get into eyes. lf contact occurs, rinse thoroughly with water. Stop use and ask a doctor if irritation or rash develops and continues for more than 72 hours. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away. Directions Tear open packet, remove wipe. Wet hands thoroughly with product and let hands air dry. Throw used wipe in trash. Do not flush. Other information Adults and children 2 years and over. Apply to hands. Allow skin to dry without Wiping. Children under 2 years. Ask a doctor before use. Inactive ingredients C12-14 Alkyl Dimethyl, Ethylbenzyl Ammonium Chloride, Alkyl Polyglucoside, Disodium EDTA, Propylene Glycol, Aqua.
The number one disinfecting wipe in healthcare. Effective against 30 microorganisms in 2 minutes. Fast contact time allows for a quick room turnover. Ideal for daily use in fast-paced environments that require short contact times and broad coverage of microorganisms. Compatible with a broad range of surfaces and equipment in healthcare EPA-registered intermediate level disinfectant Overall contact time: 2 minutes Efficacy: Bactericidal, Tuberculocidal, Virucidal Efficacy claims: 30 microorganisms, including 6 multi-drug resistant organisms (MDROs) Formulation: Quaternary ammonium and isopropyl alcohol (IPA) Compliance: Meets CDC, OSHA and CMS Tag F441 guidelines Packaging features Deep well lid provides ample space to store and access next wipe Prominent contact time for easy identification and improved compliance with accrediation standards Categorization of pathogens allows for quick identification of relevant efficacy claims Icon clearly communicates key safety information on both label and lid Healthcare Use Sites May be used on hard nonporous surfaces of: bed railings, blood glucose meters (glucometers), cabinets, carts, chairs, counters, dental unit instruments trays, exam tables, gurneys, isolettes, IV poles, stethoscopes, stretchers, tables, telephones, toilet seats, diagnostic equipment, patient monitoring equipment, patient support and delivery equipment, and many more! Please refer to the product/master label to get the full listing of use sites
The number one disinfecting wipe in healthcare. Effective against 30 microorganisms in 2 minutes. Fast contact time allows for a quick room turnover. Ideal for daily use in fast-paced environments that require short contact times and broad coverage of microorganisms. Compatible with a broad range of surfaces and equipment in healthcare EPA-registered intermediate level disinfectant Overall contact time: 2 minutes Efficacy: Bactericidal, Tuberculocidal, Virucidal Efficacy claims: 30 microorganisms, including 6 multi-drug resistant organisms (MDROs) Formulation: Quaternary ammonium and isopropyl alcohol (IPA) Compliance: Meets CDC, OSHA and CMS Tag F441 guidelines Packaging features Deep well lid provides ample space to store and access next wipe Prominent contact time for easy identification and improved compliance with accrediation standards Categorization of pathogens allows for quick identification of relevant efficacy claims Icon clearly communicates key safety information on both label and lid Healthcare Use Sites May be used on hard nonporous surfaces of: bed railings, blood glucose meters (glucometers), cabinets, carts, chairs, counters, dental unit instruments trays, exam tables, gurneys, isolettes, IV poles, stethoscopes, stretchers, tables, telephones, toilet seats, diagnostic equipment, patient monitoring equipment, patient support and delivery equipment, and many more! Please refer to the product/master label to get the full listing of use sites.
TIO2 pigment, Barium Sulphate, Aluminum Trihydrate, Aluminum Monohydrate and Calcined Alumina.
Natural barium sulphate (barytes) Natural barium sulphate is used in the manufacturing industry as a component in paints, inks, and varnishes. It is also used in the production of paper, textiles, and plastics, as well as in oil drilling. A barium salt, combined with a sulfuric acid solution, is used to form a white barium sulfate precipitate.
Glycerin / glycerol, sodium laureth sulfate, sodium dodecyl sulfate, ammonium lauryl sulfate, lauryl glucoside, decyl glucoside, coco glucoside..Logistics
Ammonium nitrate, urea 46, low white spirit, sunflower oil, petroleum, pet coke, phosphate, aluminum ingots, and used rails scrap.
Product including polyferric sulfate, polyaluminum chloride, ferrous sulphate, aluminium sulfate, polyacrylamide, and other sewage treatment agents, .
Ammonium Perchlorate.
Ammonium phosphates.
Manufactures of zirconium precursors useful for the production of zirconia refractories, zirconia ceramics and pure zirconium chemical compounds such as zirconium sulphate, zirconium oxychloride, zirconium basic carbonate.
Sugar, ammonium sulfate, potassium sulfate, urea, soap noodle, rice, copper cathode, plastic forks, spoon, knife, disposable take out containers, Petroleum Products.Trading agent
