Industrial equipment Brazed plate heat exchanger is a new type of high-efficiency heat exchanger made of a series of metal sheets with a certain corrugated shape stacked and brazed. Thin rectangular channels are formed between various plates, and heat is exchanged through the plates. Compared with the conventional shell and tube heat exchanger, its heat transfer coefficient is much higher under the same flow resistance and pump power consumption, and it has a tendency to replace the shell and tube heat exchanger within the applicable range. Applications: Refrigeration: used as condenser and evaporator b. HVAC: intermediate heat exchangers used in conjunction with boilers, intermediate heat exchangers in high-rise buildings, etc. c. Chemical industry: soda ash industry, ammonia synthesis, alcohol fermentation, resin synthesis cooling, etc. d. Metallurgical industry: heating or cooling of aluminate mother liquor, cooling of steelmaking process, etc. e. Machinery industry: cooling of various quenching fluids, cooling of reducer lubricating oil, etc. Design Parameters Flow range: 1-2000 m3/h Working pressure: vacuum-8.2MPa Operating temperature: -195-538C Interface size: 1"-DN300 welding, flange, thread and other connection forms Corrosion resistance: Welding seal without rubber gasket, choice of various metal and alloy materials, super corrosion resistance, longer service life. Application field: Crude oil, natural gas purification and chemical products; chemical industry; pharmaceutical and specific chemicals; injection control systems; HVAC, district heating, thermal power plants; food processing; cooling tower heat recovery Process requirements Pickling temperature: Raising the pickling temperature is conducive to improving the descaling effect. If the temperature is too high, it will aggravate the corrosion of the pickling solution to the heat exchanger plates. Through repeated tests, it is found that the pickling temperature should be controlled at 60. 2) Concentration of pickling solution: According to repeated tests, the pickling solution should be prepared according to the concentration of formic acid 81.0%, water 17.0%, buffer 1.2%, and surfactant 0.8%, and the cleaning effect is excellent. 3) Pickling method and time: The pickling method should be carried out by a combination of static soaking and dynamic circulation. The pickling time is static soaking for 2h first, and then dynamic circulation for 3~4h. During the pickling process, samples should be taken frequently to test the pickling concentration. When the difference between the two adjacent test concentrations is less than 0.2%, the pickling reaction can be considered to be over. 4) Passivation treatment: After pickling, most of the scale and metal oxides on the surface of the plate heat exchanger will be dissolved and fallen off, exposing new metal, which is very easy to corrode. The sheet is passivated.
ZK5000 walk through metal detector mainly adopts infrared temperature measurement dot matrix sensor for accurate temperature measurement. If imported medical grade chips are used, the temperature difference can be controlled within 0.3 It is perfect for all establishments where safety and security is important such as workplaces, schools, banks, prisons, shopping malls, hospitals etc. Product Specification: Product- Infrared temperature walk through metal detector Certification- CE/FCC/ROHS Temperature accuracy- 0.3 Power consumption- 15W Temp. Detecting Range- 25 ~ 43 External Power- AC 110~240V, 50/60HZ Net Weight- 45KG Gross Weight- 52KG Working Environment- No direct sunlight, no wind Operating humidity- 99% non-condensing Inner Size- 1983 H 702 W 334 L mm Outline size- 2199 H 818 W 334 L mm Package Size- (2 cartons) 820*480*260mm (control unit) 2340*830*260mm(frame panel) The infrared temperature measurement and walk through metal detection security door are integrated. Before passing through the metal security door, the infrared human body temperature measurement work first, and the sound alarm is given to indicate the abnormal temperature, so as to effectively prevent the large-scale disease infection. It adopts the world's advanced electromagnetic compatibility design and anti vibration design, with ultra-high sensitivity, strong anti-interference ability and anti-seismic ability. Product Details: (1) The temperature measurement and metal detection functions are combined into one. (2) High precise body temperature detection and auto alarming, response time< 0.5s. (3) Safety temperature threshold with self-calibration (standard: 37.3 C, adjustable). (4) Safety Pass through (in & out) counting, auto alarming with sound and LED lights. (5) Light weight and strong anti-interference, stable performance. (6) Automatic self-calibration, pre-setting the alarm threshold, decrease manual operation and improve efficiency. (7) Plug and play with modular design parts, easy to install and troubleshoot. (8) Low rate of false alarm with cutting-edge digital signal processing technology. (9) One button operation to restore factory default settings. (10) International A-level measurement capability, stable working.
Concrete Block Maker A concrete block maker, often referred to as a concrete block machine or concrete block manufacturing machine, is a device used in the construction industry to produce concrete blocks, which are essential building materials for various types of structures. These machines automate the process of creating concrete blocks, which are commonly used for walls, pavements, and other load-bearing structures. Features Mold Options: Concrete block makers often come with interchangeable molds that allow you to produce blocks of different sizes, shapes, and designs. This versatility is useful for accommodating various construction needs. Automation Levels: Concrete block makers can range from manual machines that require human operation for each step, to semi-automatic and fully automatic machines that handle many processes automatically, including feeding, compaction, and demolding. Vibration System: Many machines incorporate a vibration system that helps to compact the concrete mixture in the mold, ensuring that the blocks have a dense and uniform structure. Hydraulic or Mechanical Systems: The compaction process can be driven by hydraulic or mechanical systems, both of which apply pressure to the concrete mixture. Hydraulic systems are often preferred for their precision and ability to exert consistent pressure. Curing System: Some advanced machines include a curing system that helps accelerate the curing process, allowing for quicker block turnover and reduced curing time. Control Panel: Automatic and semi-automatic machines typically have a control panel that allows operators to adjust settings, monitor the production process, and troubleshoot issues. Batching System: In some machines, an automated batching system accurately measures and mixes the raw materials in the correct proportions, ensuring consistent block quality. High Production Capacity: Depending on the model, concrete block makers can produce a significant number of blocks per hour, making them suitable for large-scale construction projects. Quality Control Sensors: Some machines have sensors that monitor the density, moisture, and strength of the blocks, ensuring that they meet quality standards. Energy Efficiency: Some modern machines are designed with energy-saving features to reduce power consumption during operation. User-Friendly Design: Manufacturers often prioritize user-friendly interfaces and ergonomic designs to make operation and maintenance easier for operators. Durability and Materials: High-quality machines are constructed from durable materials that can withstand the harsh conditions of a construction environment. Safety Features: Safety mechanisms such as emergency stop buttons, safety guards, and sensors are integrated into many machines to protect operators during operation.
Dipotassium Phosphate Food Grade/ Tech Grade/ Dipotassium Phosphate (DKP): Chemical Property: Dipotassium phosphate (DKP), also known as potassium phosphate dibasic, has the chemical formula K2HPO4. It is a salt that exists as a white, crystalline powder or granules. DKP is highly soluble in water, which facilitates its use in various applications. It contains two potassium (K+) cations and one hydrogen phosphate (HPO4^2-) anion in its chemical structure. Applications: Dipotassium phosphate is utilized in a range of industries due to its properties as a nutrient source, pH regulator, and food additive. Food and Beverage Industry: DKP is commonly used as a food additive in the food and beverage industry. It acts as a buffering agent to control acidity and pH levels in various products, including processed foods, beverages, and dairy products. It also works as a sequestrant, helping to improve the stability and texture of certain food items. Nutritional Supplements: In the production of nutritional supplements, DKP can be used as a source of both potassium and phosphorus, essential nutrients for human health. These supplements might target individuals with specific dietary needs or deficiencies. Bakery and Baking Powder: DKP is sometimes used in baking powder formulations. It interacts with other ingredients, like baking soda (sodium bicarbonate), to release carbon dioxide gas and leaven baked goods. pH Buffering and pH Control: Due to its ability to regulate pH, DKP is used in various industrial processes where maintaining a specific pH range is crucial. This can include water treatment, chemical manufacturing, and certain laboratory applications. Pharmaceuticals and Medicine: DKP might be used in pharmaceuticals and medicine for its pH-regulating properties, as well as its potential use as a source of essential nutrients in certain formulations. Water Treatment: In water treatment processes, DKP can be used to adjust pH levels and reduce the corrosiveness of water. It's also used to inhibit the formation of scale and deposits in pipes and equipment. Laboratory and Research: DKP is utilized in laboratory settings for various purposes, including as a component in buffer solutions used in experiments requiring specific pH conditions. Dipotassium phosphate's versatility in balancing pH levels, providing essential nutrients, and enhancing stability makes it a valuable ingredient in multiple industries. As with any chemical, its application should be handled with care to ensure proper dosing and to mitigate potential environmental impacts. FORMULA: K2HPO4 CAS NO: 7758-11-4 / 16788-57-1 EINECS: 231-834-5 ORIGIN: China Port of Loading: Xiamen MOQ: 17MT ETD: 10 Days Customization: Yes Package: 25kg/1000kg/1250kg/1300kg Bags
Diammonium Phosphate DAP Food Grade/ Tech Grade/ Electronic Grade Diammonium Phosphate (DAP): Chemical Property: Diammonium phosphate (DAP) is a compound with the chemical formula (NH4)2HPO4. It is a highly soluble salt that appears as a white, crystalline powder. DAP contains two ammonium (NH4+) cations and one hydrogen phosphate (HPO4^2-) anion in its structure. This composition provides a source of both nitrogen and phosphorus, making DAP a valuable fertilizer and nutrient supplement. Applications: Diammonium phosphate finds applications primarily in agriculture as a fertilizer, but it also has uses in other industries: Agriculture and Fertilizers: DAP is one of the most commonly used fertilizers worldwide. Its high nitrogen content supports plant growth and leaf development, while phosphorus promotes root growth, flowering, and fruiting. The ammonium component of DAP also contributes to pH control in soil, which can be important for optimizing nutrient availability to plants. Nutrient Supplement: DAP can be used as a nutrient supplement for both plants and animals. In animal feed, it provides a source of nitrogen and phosphorus, essential for growth and overall health. Industrial Processes: DAP is utilized in various industrial applications. For instance, it's used as a fire retardant and flame inhibitor in certain materials due to its ability to release ammonium compounds that resist combustion. Water Treatment: In water treatment processes, DAP can be used to reduce pH levels, control scale formation in pipes, and adjust the alkalinity of water. Yeast Nutrient: In the brewing and fermentation industries, DAP is used as a nutrient for yeast during the fermentation process. It provides nitrogen necessary for yeast growth and alcohol production. Laboratory and Research: DAP is sometimes employed in laboratories for specific applications, such as in the preparation of buffer solutions or as a source of nutrients in cell culture media. Explosives Manufacturing: While not a common application, DAP has been used in the production of certain explosives due to its chemical properties. DAP's versatility stems from its dual nutrient content of nitrogen and phosphorus, making it valuable for promoting plant growth and supporting various industrial processes. When using DAP, it's important to consider proper dosing and application methods to ensure optimal results and minimize any potential environmental impacts. FORMULA: (NH4)2HPO4 CAS NO: 7783-28-0 EINECS: 231-987-8 ORIGIN: China Port of Loading: Chongqing MOQ: 25MT ETD: 25-30 Customization: Yes Package: 25kg/1000kg/1250kg/1300kg Bags
TMAP with N:P:K 12:61:0, Food Grade, Tech Grade and electronic Grade Monoammonium Phosphate (MAP): Chemical Property: Monoammonium phosphate (MAP) is a chemical compound with the formula NH4H2PO4. It is a white crystalline powder that is highly soluble in water. MAP is an acidic salt with a low pH, making it suitable for applications where acidic conditions are desired. It contains both ammonium (NH4+) and phosphate (H2PO4-) ions, making it a source of both nitrogen and phosphorus nutrients. Applications: Monoammonium phosphate has a wide range of applications in various industries due to its properties as a fertilizer, fire retardant, and food additive. Agriculture and Fertilizers: MAP is commonly used as a fertilizer in agriculture. It serves as a source of both nitrogen and phosphorus, essential nutrients for plant growth. The high solubility of MAP ensures that plants can readily absorb these nutrients, promoting healthy root development, flowering, and fruiting. It is particularly beneficial for crops that require early-season nitrogen and phosphorus supplementation. Fire Retardant: MAP is also used as a fire retardant in both the agriculture and forestry sectors. When applied to plants or materials, it releases ammonium and phosphate compounds that can act as flame inhibitors, reducing the flammability of the treated material. This makes it valuable for preventing and controlling wildfires and protecting valuable crops. Food Additive: In the food industry, MAP is used as a leavening agent in baking. It reacts with baking soda (sodium bicarbonate) to produce carbon dioxide gas, which helps dough rise and gives baked goods their desired texture. It is commonly found in baking powders and self-rising flour. Industrial Applications: MAP is used in various industrial processes, including water treatment. It can be used to reduce the pH of water and control scale formation in boilers and cooling systems. It is also used in some metal cleaning and finishing operations. Nutrition Supplements: MAP is sometimes used in the formulation of nutritional supplements, especially in cases where a controlled release of both nitrogen and phosphorus is needed, such as in plant fertilizers for hydroponic systems or aquarium plant care. pH Adjustment: Due to its acidic nature, MAP can be used to adjust the pH of various solutions, including in some laboratory settings and industrial processes where maintaining a specific pH range is crucial. Monoammonium phosphate's versatility stems from its ability to provide essential nutrients, modify fire behavior, and contribute to various chemical reactions across multiple industries. However, its usage should be managed responsibly to ensure optimal results and minimal environmental impact. FORMULA: NH4H2PO4 CAS NO.: 7722-76-1 EINECS: 231-764-5 ORIGIN: China Port of Loading: Chongqing MOQ: 25 MT ETD: 25-30 Days Customization: Yes Package: 25KG/ 1000KG/1250KG/1300KG Bags
The metering fuel nozzle LLY-25 series is a combination of horizontal screw-wing flow meter and fuel gun. It is a meter instrument used to measure the volume flow rate of liquid (petrol, diesel, engine oil, hydraulic oil, etc.) flowing through the pipeline. In virtue of reliable performance, this metering fuel nozzle LLY-25 is suitable for filling petrol and other light oil products. Metering fuel nozzle LLY-25 is used for on-farm accounting, both in stationary installations and in ground-based refueling and pumping facilities. It is used as a pistol for refueling in small settlements at gas stations of a local scale. Technical Parameter â??Conditional pass â?? 25 mm â??Working pressure â?? 1 MPa â??Permissible error: �±1% â??Min.flow â?? 25 L/min â??Max flow â?? 120 L/min â??Division price â?? 1 L â??Max. set dose â?? 9999 L â??Operating temperature from -20 to +50 Working Principle Having roller pointers for a one-time count of the amount of liquid, the gun with a counter serves to count the amount of fuel that has passed through it. Roller disposable pointer crane LLY has a device for setting the readings to zero. Accounting for the amount of liquid that has passed through the counter gun is based on counting the number of revolutions of the drive screw inside the fuel dispenser gun. The flow of the measured fuel, entering the meter and passing through the volume meter, loses part of the pressure to create a torque that causes the screws to rotate. The measurement of the amount of liquid by a pistol with a counter occurs due to the periodic cutting off of certain volumes of it contained in the cavities between the cylindrical bores of the holder and the screws. This device is a combination of the simplest fuel dispenser gun and fuel meter, the accuracy and performance of which are inferior to industrial designs. Pressing the lever opens the valve, fuel flows through the gun. When the faucet lever is released, the valve closes under the action of a spring, blocking the flow of liquid. The adjusting screw is intended for equipment calibration. The drain pipe of the dispensing gun with a counter is used to direct the liquid into the container when refueling.
Local residents of Gujarat believe that the wheat grown on a large scale in the region called Bhal derives its name from the Sanskrit word bhal, which means 'head', because the region also looks flat like a head. . It sounds strange, but in reality the land here is very flat and greenery is not visible anywhere far and wide. This wheat is also called as Bhalia wheat and Dodh Kani (Dawood Khani) or Chasia wheat or Katha wheat in the local language, which grows here only in special geographical conditions. This long grain wheat is one and a half times longer than other varieties of wheat. It does not require irrigation or rain water to grow, for this the moisture stored in the soil and winter dew is enough. Bhalia wheat is cultivated in the areas of Ahmedabad, Bhavnagar and Khambat in Gujarat. Local residents say that this wheat has been cultivated for centuries without irrigation, that is, only with the conserved moisture in the soil. It grows well in rainwater drained, light or medium black soils, in Bhal and its adjoining coastal areas. During the rainy season, farmers build bunds 45 to 60 cm high around the fields to collect rainwater. After the monsoon is over, the plowing of the land is done with the help of oxen. This process is repeated again to create a finer soil layer, called a penh, which acts as a layer of grass in the soil to retain soil moisture. Usually sowing is done in late October or early November. Wheat does not get rainwater nor is it irrigated after sowing, but it continues to flourish under these conditions. It is harvested with a laugh. A threshing machine is used to remove the peel on top of it or a truck is driven over them. These are thoroughly dried before storage, as the storage life of grain depends on its moisture content (less than 10% moisture is preferred). This high quality wheat is considered the best in Gujarat due to its exquisite taste and rich protein content. This wheat absorbs oil and water in small amounts and is also an insect repellent due to its unique quality. Whole wheat being hard grained, rich in protein and high in carotene content, it is used in abundance for making rava, pasta, macaroni, spaghetti and vermicelli. This wheat is consumed in the form of bhakri and chapati. Laddu, churma, halwa and thuli are also made from it due to the high soluble sugar in it. About 1.7-1.8 lakh tonnes of wheat is produced annually in 2 lakh hectares of land. The farmers of Bhal region get 25 per cent premium over other wheat varieties and 40-50 per cent higher price as compared to ordinary wheat varieties. Bhalia wheat, which is sold under the name Gujarat's wheat (GW)-1, got Geographical Indication Tag (GI) in 2011 due to its high variety, taste and distinctive qualities.
Kolang Kaling is small to medium in size, averaging 5-7 centimeters in diameter, and has a slightly lopsided, globose to oval shape. The outer shell is smooth, firm, and hard, transforming from green to yellow-black when mature and bearing brown-black spots and discoloration at all stages of maturity. Underneath the thick shell, three translucent-white seeds are chewy and soft, encased in a fibrous interior. The fleshy seeds can be easily removed, and Kolang Kaling has a rubbery texture with a mild, neutral flavor. Seasons/Availability Kolang Kaling is available year-round in tropical regions of Asia and Southeast Asia. Current Facts Kolang Kaling, botanically classified as Arenga pinnata, are fruits that grow on a tropical palm that can reach up to twenty meters in height and belongs to the Arecaceae family. The Arenga pinnata palm is highly cultivated for its sap, fruit, bark, and leaves, and is found along river banks and forests in Southeast Asia. Also known as Buah Tap in Indonesia and Kaong in the Philippines, Kolang Kaling is favored for its neutral flavor and is popularly consumed as a chewy snack soaked in syrup or consumed as a topping on dessert. Nutritional Value Kolang Kaling contains some vitamin C, manganese, phosphorus, fiber, potassium, iron, and calcium. Applications Kolang Kaling is best suited for cooked preparations such as boiling, and the immature fruits are the preferred state for consumption. The fruit is removed from the outer, fibrous shell and then boiled to create a soft and chewy texture. It can also be cooked in syrup or flavored sodas to add sweetness and coloring. In the Philippines, Koland Kaling is flavored with red and green syrups to create a colorful fruit salad that is traditionally served at holiday meals. The fruit is also served as a topping on haluhalo, also known as halo-halo, which is a crushed ice dessert mixed with evaporated milk and topped with fruits, red beans, ube, grass jelly, and ice cream. During Ramadan, the fruits are found in kolak, which is a banana compote that is used to break fasts. In addition to using the fruits whole, Kolang Kaling can be cooked into jams or preserved in syrup for extended use. Fresh Kolang Kaling should be immediately consumed for best flavor, but the preserved, canned versions will keep for a couple of months when stored in the refrigerator. Geography/History Kolang Kaling is native to the tropical regions of Southeast Asia and has been growing wild since ancient times. Today the palm is also found in select areas in Asia, and the fruit is cultivated on a large scale for resale in local markets in Indonesia, the Philippines, Malaysia, Hawaii, India, Thailand, and China.
0.4mm Ti felt from for LGDL in electrolyzer is a versatile material with a wide range of applications in various industries including aerospace, chemical processing and energy. The material sinters titanium fibers together to form a porous structure. The result is a lightweight, high-strength material with unique mechanical and thermal properties. 0.4mm Ti felt from TOPTITECH for LGDL in electrolyzer can be used in hydrogen production and fuel cell stacks as the LGDL (Liquid/Gas Diffusion Layer). Titanium fiber mat is a promising material for electrolyzers due to its high thermal/electrical conductivity and great mechanical qualities. High corrosion resistance at high positive overpotential, for example, even in severely acidic and humid circumstances. Parameter Material: Titanium Size: 1500 1200mm Fiber size: 20 microns-40 microns Thickness: 0.20mm 0.25mm 0.40mm 0.60mm 0.8mm Porosity: 60% 75% Features 1.3D Mesh Porous Structure: 2.Strong corrosion resistance; 3.Best Electrolytic Performance: 4.High porosity and current density; 5.The pore size distribution is uniform. Features 1.3D mesh porous structure. This allows for excellent permeability and efficient electrolyte transport. This unique structure also provides a large surface area for electrochemical reactions to occur, resulting in improved performance. 2.Strong corrosion resistance. This makes it a reliable choice for use in harsh environments. This feature ensures that the product maintains its structural integrity and performance over time, even when exposed to corrosive substances. 3.Best Electrolytic Performance. When it comes to electrolytic performance, this product is a top performer. Its design allows for high porosity and current density, meaning that it can efficiently transfer electrical charge between the electrodes and the electrolyte. This results in improved energy conversion and overall system efficiency. 4.Uniform pore size distribution. This feature ensures that the electrolyte can flow evenly throughout the structure, providing consistent performance and minimizing the risk of localized damage or failure. Craft The process is to make titanium wire into micron-scale fiber through special process. The porous material is then made by laying down and sintering titanium fibers. The unique three-dimensional fiber network and fully connected pore structure will endow it with a series of special functions.
The PTO shaft 2 Series is one of the types of power transmission devices that transfers energy from an agricultural tractor or another source to an engineered implement or attachment. It's an upgrade of the 1 Series PTO shaft, made for applications where greater power and torque are needed. It is the 2 Series PTO shaft comes with an increased diameter and higher torque capacity when compared to its predecessor, the 1 Series PTO shaft. This makes it ideal for industrial and heavy-duty agricultural applications. Similar to the 1 Series PTO shaft, the 2 Series PTO shaft also includes six primary components: the tractor end yoke and universal connection, the intermediate tube safety shield, the spline yoke, and the yoke at the end of the implement. The components are paired to create a stable powerful power transmission. This shaft was made with a larger torque capacity, which makes it suited for uses such as large-scale tilling cultivation heavy-duty, and other tasks that are highly demanded. It's also compatible with a wide range of attachments and implements which includes those that are designed specifically to work with us with the 1 Series PTO shaft. This versatility makes it a preferred choice for people who own many different pieces of equipment to run. Overall The 2-Series PTO shaft offers an efficient and reliable power transfer system for industrial and agricultural applications that are heavy-duty. It's built to handle the demands of power applications with the goal of ensuring operator safety and comfort to users. #2 Series PTO Shaft Parts There are a few main components that make up the 2 Series PTO shaft: Tractor Yoke: This joins the PTO shaft onto the tractor's PTO output shaft, which supplies the power for the rest part of the PTO shaft assembly. Universal Joint - This component connects the yoke at the end of the tractor with the tube that is intermediate permitting the transfer of power to an attachment or implement and allowing some movement flexibility. Intermediate Tube Intermediate Tube - This is a hollow tube made of metal that connects the universal joint and the splined yoke, giving stability and support in the PTO shaft in its entirety. Spline Yoke â?? This can be attached to an attachment or implement and has a set of splines that connect with the female shaft that is connected to the attachment or implement to allow an exchange of energy. Safety Shield Safety Shield - A cover made of metal that covers the rotating PTO shaft assembly, which prevents accidents due to entanglement by protecting the driveline. Implement End Yoke This piece connects to the splined yoke and transmits power to the attachment or implement.
Multimeter MF500 high-precision mechanical pointer meter inner magnetic outer magnetic 2500V. Fully automatic high precision AC DC voltage and current resistance measurement tool, a smart digital multimeter born for mobile phone repair. The MF500 series multimeter is a portable rectifier system with high sensitivity and multiple limits. It can measure AC and DC current, AC and DC voltage, DC resistance and audio level separately. It is suitable for radio, telecommunications and electrician institutions as general measurement. Features: The MF500 multimeter shell is made of phenolic compression molding powder, which has good mechanical strength and electrical insulation performance. The instrument is equipped with a sealing device to reduce the external dust and harmful gas from eroding the inside of the instrument. The dial of the instrument is wide, and the end of the pointer is knife-shaped, so it can clearly indicate the measured value. The battery box is located on the back of the meter and isolated from the inside of the meter, so it is convenient to replace the battery. The volume of the instrument: 178X 173X84 mm; SPECIFICATIONS: DC Voltage: 2.5 / 10/50/250/500 V / 2500 V AC Voltage: 10/50/250/2500 V Current DC: 0.5mA / 1mA / 10mA / 100mA / 500mA Resistance: R2K / R20K / R200K / 2M / 20M Dimensions: 178 * 138 * 84mm Weight: about1450g Power supply: 1.5V C battery 1 + 9V 6F22 battery * 1 & # 65288; without battery 65289; Accessories: test leads, Manual weight: more than 1 kg. CHARACTERISTICS: MF500 multimeter is a high sensitivity, portable, rectifier-based instrument. The instrument has twenty-four ranges, respectively, can measure AC and DC voltage, DC current, resistance, and audio level. basic function: DCV ACV DCA etc. mirror feature scale for accurate reading Classic design magnetic internal board head Bakelite shell overload protection. Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. This watch needs to be equipped with one laminated battery (9V) and one AA battery (1.5V). Since the performance of the battery will fail after the storage period, the product does not come with a battery. If necessary, the cost will be calculated separately.
Powder sintered filter elements for filtration are a type of porous filter made by sintering metal powders into a solid structure with interconnected pores. Powder sintered filter elements for filtration have a high surface area and are capable of filtering particles from liquids and gases. They are commonly used in applications where high temperatures and corrosive environments are present, such as in chemical processing, oil and gas refining, and power generation. Parameters Material: titanium powder Craft: sintering Size: customized Features 1.Precise Filtration: Powder sintered filter elements can be designed with a specific pore size to provide precise filtration of particles and contaminants, down to the submicron level. 2.High Dirt Holding Capacity: Powder sintered filter elements have a high dirt holding capacity, meaning they can retain a large amount of particulate matter before requiring replacement or cleaning. 3.Reusability: Powder sintered filter elements can be easily cleaned and reused, making them a cost-effective solution in applications where frequent filter replacement is required. 4.Customizable Shapes and Sizes: Powder sintered filter elements can be manufactured in a range of shapes and sizes, including cylinders, discs, cones, and tubes, to fit specific applications and equipment. Applications Powder sintered filter elements are a versatile and effective solution for a wide range of filtration applications, particularly where high temperatures, corrosive environments, and precise filtration is required. Chemical Processing: Powder sintered filter elements are used for the filtration of corrosive chemicals and solvents, such as acids, alkalis, and organic compounds. They are also used for the separation of catalysts and the purification of process streams. Oil and Gas: Powder sintered filter elements are used in oil and gas processing for the removal of contaminants, such as sand, scale, and other solid particles. They are also used for the filtration of natural gas, as well as in fuel and hydraulic systems. Food and Beverage: Powder sintered filter elements are used in the food and beverage industry for the filtration of liquids, such as juices, beer, and wine. They are also used for the removal of impurities and contaminants, such as bacteria and particles. Pharmaceuticals: Powder sintered filter elements are used in the pharmaceutical industry for the filtration of liquids and gases in the manufacturing process of drugs and vaccines. They are also used for the removal of contaminants, such as bacteria, viruses, and particles. Water Treatment: Powder sintered filter elements are used for the removal of impurities and contaminants in water treatment applications. They are used for the filtration of drinking water, wastewater, and industrial process water.
The 77 series of high-performance PTO drive shafts provide the most popular drive shaft solutions for the lawn and turf industries. These PTO drive shafts come as complete assembly from tractor to the implement. They are made for long-term heavy-duty use and are able to meet the demands of large-scale farms and contractors. PTO shafts for tractor and Wide-angle CV PTO shafts can be adaptable to standard PTO driveshafts that are available on the market. Specifications of the 77 Series PTO Shaft The Easy Lock Guard Set Length 60.00 inches 1524 mm Outside Diameter 7.72 inches 196 millimeters Shipping Dimensions 60" L 60" L 7.72" H 60" L x 7.72" H 7.72" W 150.2cm L x 20cm H 20cm W Shipping Volume 3575.90 in3 58599 cm3 Shipping Weight 4.30 pounds 2 kilograms Weight 4.30 pounds 2 kilograms Yoke And Shaft HP@1000RPM 264 HP The power of 197 kilowatts HP@540RPM 172 HP 128 Kilowatts Length 32.75 inches 832 mm Dimensions of Shipping 34.25" L 3.6" H 5.75" W 95cm L x 87cm H 15cm W Shipping Volume 677.92 in3 11109 cm3 Kit of Bearings And Cross Diameter of Bearing 1.77 inches 45 millimeters Bearing Spannel 4.95 inches 126 millimeters Diameter of Bearing 1.77 inches 45 millimeters Bearing Spang 4.95 inches 126 millimeters Height 1.77 inches 45 millimeters HP@1000RPM 264 HP 197 Kilowatts HP@540RPM 172 HP 128 Kilowatts Kit Type E Length 4.95 inches 126 millimeters Interval of Lubrication 50.00 Dimensions of Shipping 4.957" L 1.772" H 4.957" W 13cm L x 5cm H 13cm W Shipping Volume 43.54 in3 713 cm3 Snap Ring Location External Width 4.95 inches 126 millimeters 7 Series replacement Parts Weasler PTO Shafts Parts Are you searching for an reliable source of PTO drive shaft components? At HZPT we offer everything you require to boost the performance of your tractors and implements. We have a variety of PTO shaft assemblies and components from top-quality manufacturers in the field. Our vast inventory lets us offer the products at competitive prices. In our assortment of tractor PTO shafts there's everything from shafts and yokes to rolling pins and drivetrains. We'd love to hear from you when you're struggling to decide the best products for your machine. Our team of experts can guide you to the proper direction.
An electrical panel is what? An electrical panel, also known as a breaker panel, is a metal box with a door that is typically incorporated into a wall in a secluded area of your home. All of your home's breaker switches are located inside. Breaker switches can be turned on and off. They are designed to automatically shut off when there is too much electrical current flowing through them. There is a main circuit breaker in the electrical panel that regulates the electricity to the entire house. Also, you'll see individual breakers, each of which is in charge of supplying electricity to a different area of your house. The section of the house that each breaker regulates should be noted on the device's label. In some older homes, fuses are used in place of breakers. There won't be any switches on your electrical panel if you have a fuse box; instead, there will be screw-in fuses. You can have trouble getting insurance or your premiums might go up if your house still has a fuse box. Fuse issues and home insurance are discussed lower down the page. Your home's electricity is supplied via an electrical metre outside, which then travels to your electrical panel. With the main breaker in your electrical panel, you can stop this primary electricity supply. You may also find out the amperage of your electrical service from your main breaker (amperage is the strength of the electrical current). KDM Global, a renowned maker of electrical panels from India, has earned impressive market recognition. To satisfy the high industrial standards, we provide a full range of products. Our technically competent staff carefully makes our items in compliance with industry standards to provide products of a high calibre on a global scale. Our own manufacturing facility has the most recent technologies available. This helps us improve our Power Control Panel to a level that is superior to that of other countries. To ensure dependable operation, our experts use premium quality raw materials while creating Electrical Panel Board.Sending us inquiries about the products is encouraged from interested customers. We provide our products at competitive prices as one of the top suppliers and exporters of Electrical Control Panels. What features does a manufacturer of electrical panels offer in their products? The electrical panel houses numerous circuit breakers that are connected to a circuit that delivers power to various commercial and industrial sectors, including automobile manufacturing, chemical manufacturing, and refineries. They are mostly utilised to supply energy for the operation of large machinery and factories. It genuinely has the appearance of a steel box and evenly covers all the wires and circuits inside it, protecting your circuits from harm and fire.They are available in a variety of specifications to meet the needs of various businesses since they operate at various voltages or current levels.
4K 48MP 1080P Industrial Microscope Camera Set HDMI USB Industrial Microscope Camera 1-130X Zoom Lens 40LED Light Universal Foldable 1/4" Thread Photography Lighting Phone Camera Tripod Stand For Digital Image Acquisition PCB CPU Repair Soldering. 48MP 4K Camera Specification: Model: Camera with HDMI USB2.0 two output Image sensor: 48 megapixel Panasonic sensor Power supply: 5-12V 1A Frame rate: 1920*1080 60F/S @ HDMI output Video save Movie size: 4K(25fps) 2K(30fps) 1080P(60fps) 720P(60fps)(Note: If you need to record 4K or 2K video, you need to use the SDHC class10 TF card.) Housing: All metal Support: C-Mount lens Digital magnification: 5 times digital zoom White balance: Auto/manual Cross cursor: Support multi-color, size adjustable TF card interface: Max 32G Video format: MOV HDMI interface: HDMI/USB output Image: 48M 8000X6000/38M 7168X5376/26M 5888X4416/20M 5120X3840/16M 4608X3456 Language: Chinese/English Mirroring: Support Frequency: 50Hz/60Hz Monitor: 16:9/16:10/4:3 Grid line: 15 Horizontal line, 15 Vertical line, Central scale line,Custom colors,Size Universal Foldable Overhead Tripod Specification: Color: Black Material: aluminum alloy Height: 14-20inch adjustable Top with 1/4 inch screw, suitable for mobile phone clip, ring light, camera, etc. The base has several non-slip rubber pads to prevent sliding. Multi-angle shooting. Shoot on the ground and live video on the desktop. Simple installation, foldable storage, convenient for travel. For live streaming, video recording, makeup, still life photography, etc. 130X Zoom C-MOUNT Lens: Working distance: 55~285mm Magnification Power by 8X~130X Size: 110 mm(L) * 38 mm(DIA) Visual field: 5mm-35mm 40 LEDs Ring Light Specification: Outer diameter size: 50mm (1.97") Inner diameter size: 30mm (1.18") input Voltage: AC 110V To 240V, Power: 3.5W to 5W; Brightness Adjustment: 0 to 100% Color of light : White, Color of shell: black Quantity Of LED : 40pcs Full Set Package including : 1 x Microscope Camera (4K 48MP ) 1 x Power supply (EU/US/AK/UK) 1 x C-mount Lens 1 x 50mm Ring Adapter 1 x Camera Phone Tripod 1 x 40LEDs Ring Light
48MP 4K 1080P HDMI USB Industrial Microscope Camera Kit 130X C-Mount Zoom Lens 40-LED Ring Light Tripod Stand For Phone PCB Repair Live Streaming Video Recording. 48MP 4K Camera Specification: Model: Camera with HDMI USB2.0 two output Image sensor: 48 megapixel Panasonic sensor Power supply: 5-12V 1A Frame rate: 1920*1080 60F/S @ HDMI output Video save Movie size: 4K(25fps) 2K(30fps) 1080P(60fps) 720P(60fps)(Note: If you need to record 4K or 2K video, you need to use the SDHC class10 TF card.) Housing: All metal Support: C-Mount lens White balance: Auto/manual Cross cursor: Support multi-color, size adjustable TF card interface: Max 32G HDMI interface: HDMI/USB output Image: 48M 8000X6000/38M 7168X5376/26M 5888X4416/20M 5120X3840/16M 4608X3456 Language: Chinese/English Frequency: 50Hz/60Hz Monitor: 16:9/16:10/4:3 Grid line: 15 Horizontal line, 15 Vertical line, Central scale line,Custom colors,Size Overhead Tripod Specification: Color: Black Material: aluminum alloy Top with 1/4 inch screw, suitable for mobile phone clip, ring light, camera, etc. The base has several non-slip rubber pads to prevent sliding. Multi-angle shooting. Shoot on the ground and live video on the desktop. Simple installation, foldable storage, convenient for travel. For live streaming, video recording, makeup, still life photography, etc. 130X Zoom C-MOUNT Lens: Working distance: 55~285mm Magnification Power by 8X~130X Size: 110 mm(L) * 38 mm(DIA) Visual field: 5mm-35mm 40 LEDs Ring Light Specification: Outer diameter size: 50mm (1.97") Inner diameter size: 30mm (1.18") input Voltage: AC 110V To 240V, Power: 3.5W to 5W; Brightness Adjustment: 0 to 100% Color of light : White, Color of shell: black Quantity Of LED : 40pcs Full Set Package including : 1 x Microscope Camera (4K 48MP ) 1 x Power supply (EU/US/AK/UK) 1 x C-mount Lens 1 x 50mm Ring Adapter 1 x Camera Phone Tripod 1 x 40LEDs Ring Light
What To Know About Magic Eraser Are you still looking for a utility cleaning tool? To solve the tough cleaning problems, like scale, coffee stains, wall drawings by kids, and soap scrum on the hot tub. Congratulations! You come to the right place, donot miss this article, you will get unexpected gains. Magic melamine sponge, a white block sponge that has been produced by Topeco Clean for more than 20 years, seems to solve all the cleaning works in our daily life. Google it, and you will find that the sponge is recommended to be used for almost everything. From dishes to cups, shoes to the car interior, there is no surface magic eraser cannot do. To figure out the reason, we consulted the CEO Elsa of Mr. Topeco. Let unmask the cleaning secret behind the magic eraser together. Clean With Water Alone Why call the sponge magic Most people like the sponge because of the perfect job done with only a little water and wiping gently, says Elsa. The cleaning is a kind of mechanical cleaning, not by cleaning media, which makes the cleaning work safer and healthier. So what makes them gain power? Melamine Foam â??â??The raw material is melamine foam,â??â?? Elsa continues. â??â??The foam has polyporous, the pores are combined by fibers, these fibers are as hard as glass.â??â?? When cleaning, the fibers will go deep into the dirt and absorb them and then wipe them. These nanoscale fibers make the sponge softer and more flexible, which will not destroy the surface itâ??s cleaning. Magic Eraser Uses The magic eraser has a great job on the toughest grime and stains. There are many famous brands on the market. Like Mr. Clean's magic eraser. If you used it before, you will know. The magic eraser will become smaller and smaller and break down completely soon if you use them too often. Even brand one, the sponge has the same speed of consumption. How To Buy Magic Eraser You can find melamine sponges on Amazon or other online stores. They are the same or similar to Mr.Clean but packed in bulk. No the costs of brand marketing and packaging, make the sponge cheaper. But quality is the only element you need to distinguish. How To Find a High-Quality Magic Eraser From the appearance, there should not be big open pores on the surfaces. When touching, it should be elastic. Bending it, the sponge will not break. Remember these, buying a high-quality magic eraser. Welcome to leave your thought.
An Stainless Steel Air Shower is a highly versatile local purification device in which clean, filtered, strong air is blown out of the surface of the person entering the clean area by the fan through the air shower nozzles to remove the adsorbed dust. What does an air shower room do? In a clean area, the source of bacteria and dust is the operator in a dynamic situation. Before the operator enters the clean area, the dust particles adhering to the surface of his clothes must be blown with clean air and act as an airlock. The Stainless Steel Air Shower is the purification equipment for personnel to enter the clean zone clean workshop, it is universal and can be used with all clean zones and clean plants. When entering the workshop, the staff must pass through this equipment, with strong clean air, by rotating nozzles from all directions to spray to the person, effective and rapid cleaning on the clothes attached to the dust, hair, hair dander and other debris, it can reduce the problem of pollution caused by people entering and leaving the clean area. How many types of air showers are there? Air shower rooms can be divided according to the blowing mode into. (1) Single blowing type: a side panel with nozzles, suitable for factories with low requirements, such as: food packaging or beverage processing, production of vats of water, etc. (2) Double blowing type: one side plate and the top plate have nozzles, suitable for domestic food processing enterprises, such as: pastry making, dried fruit and other small-scale enterprises. (3) Triple blow type: two side panels and the top have nozzles, suitable for export processing enterprises, or high precision instruments and other demanding industries. The importance of clean room air showers When a clean airflow is sent into the room from the air supply, it will quickly spread and mix, and at the same time the airflow is discharged from the air return, using the clean air supply airflow mixing dilution effect, the original dust concentration of high indoor air dilution, while indoor pollution sources generated by the uniform diffusion of pollutants can also be discharged outdoors in a timely manner, to achieve the corresponding dynamic balance, to meet the requirements of indoor cleanliness, to achieve the air supply The key to achieving a better mixing and dilution of airflow is to make the indoor airflow diffusion speed fast and uniform airflow.
Why Nano Sponge Clean Just Use Water A nano sponge, also known as magic foam sponge, cleaning sponge, super stain removal melamine foam, magic sponge, etc., uses the fourth generation of new nanotechnology research and development of a special open cell structure foam body. It is the 21st century's new eco-friendly cleaning product. Magic cleaning sponge is of no smell, non-toxic, harmless, light, eco-friendly, cheap, and has excellent cleaning power. White is the main color. Cleaning Principle The nano sponge can effectively clean tea scale, dirt, limescale, soap scum, and other dirt, on hard and smooth surfaces (such as ceramics, plastic plates, glass, and stainless steel). It is more play a good physical decontamination effect in life, the use of the product only wet with some water, no detergent. Gently wiping can remove stains. Recently years, nano sponges have become a hot cleaning item in the United States and Europe, Japan, South Korea, and other countries, which have been a large number of family use. Surface tension is caused by a large combinative force between the molecules of the liquid. In the liquid surface layer of molecules the liquid inside the thin, so they are pointed to the role of the force inside the liquid. So the liquid surface layer is like a tight rubber membrane, there is a tendency to contract. Surface tension generated by an important phenomenon is the capillary phenomenon. That is, the infiltration of liquid in the thin tube up, not infiltrated liquid in the tube down. What is the Detailed Information about Nano Sponge What is the capillary phenomenon It refers to the phenomenon that the liquid is not affected by gravity as well as up and down, and will permeate the very small space that exists between the fiber. Extra, the capillary tube into the liquid, due to the adhesion of the liquid and surface tension and the interaction of the surface inside the tube, the liquid surface will occur along the capillary tube rise or fall phenomenon. The quality nano sponge developed by Clean is more quality than ordinary sponges, making each small particle smaller than one ten thousandths of hair. After it is immersed in water, under the action of surface tension of water, it's internal will form numerous capillary open pore structures. When wiping dirt with a wipe of water, the capillary phenomenon can automatically adsorb stains on the surface of objects, to decontaminate.
