Description Two Component, Air-drying, Epoxy Polyamide Cured Finish Paint. Recommended Use :- It Is Recommended As A Top Coat For Structures, Pipelines, Vessels, Equipments And Machineries, Storage Tanks Etc. In Fertilizers And Chemical Plant, Cement Plants, Power Plants, Steel Plants, Pharmaceutical And Petrochemical Complexes, Refineries Etc. Product Is Also Recommended For Application Over Suitable Primer For Oem Industry Like Machine Tools, Pumps, Machineries, Transformers Etc. Physical Data Colour : assorted Shades Finish : glossy / Semi Glossy Solids By Volume : 40 +3% (depends On Shade) Theoretical Spreading Rate : 13.33 Sq.mt / Ltr At Recommended Dft Of 30 au Flash Point : base: Above 23 C Hardener: Above 23 C Drying Characteristics (at 30'c And 65% Relative Humidity) : hard Dry : Overnight Full Cure : 7 Days Shelf Life : base : 6 Months Hardener : 6 Months Surface Preparation This Being A Topcoat, Which Is Applied Over, Primer Or Intermediate Coats, The Surface Should Be Free From Oil, Moisture, Dust And Dirt. Aged Epoxy / Pu Coating Should Be Roughened By Emery Paper Grade 400 / 600 For Better Bonding. Application Data :- Mixing Ratio : base : Hardener (as Per Our Recommendation) Application : by Brush / By Conventional Spray / By Airless Spray Thinner : 190 Pot Life : 4-6hrs Min At 30 C Recommended Dft : 30-40 U Over Coating Interval : min : 8 Hours Max : 24 Hours Compatibility : can Be Over Coated With Pu, Chlorinated Rubber And Synthetic Enamel Paints.
Description Two component, air-drying, Epoxy polyamide cured finish paint. Recommended Use :- It is recommended as a top coat for structures, pipelines, vessels, equipments and machineries, storage tanks etc. in fertilizers and chemical plant, cement plants, power plants, steel plants, pharmaceutical and petrochemical complexes, refineries etc. Product is also recommended for application over suitable primer for OEM industry like machine tools, pumps, machineries, transformers etc. Physical Data COLOUR : Assorted Shades FINISH : Semi glossy SOLIDS BY VOLUME : 40 �± 3% (Depends on shade) THEORETICAL SPREADING RATE : 13.33 sq.mt / ltr at recommended DFT of 30 �µ FLASH POINT : Base: Above 23�° C Hardener: Above 23�° C DRYING CHARACTERISTICS : SURFACE DRY : 90 minutes max HARD DRY : Overnight FULL CURE : 7 Days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation This being a topcoat, which is applied over, primer or intermediate coats, the surface should be free from oil, moisture, dust and dirt. Aged epoxy / PU coating should be roughened by emery paper grade 400 / 600 for better bonding. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendation) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : 190 POT LIFE : 4-6hrs min at 30 �° C RECOMMENDED DFT : 30-40 �µ OVER COATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with PU, Chlorinated rubber and synthetic enamel paints.
Description Two component metallic zinc rich epoxy high performance primer. Recommended Use :- The zinc pigment in dry film renders excellent protection to steel structure, tanks, bullets, dam gates, pipelines, plant equipments, jetty, etc. in both interior and exterior exposed conditions of fertilizer units, chemical plants, steel plants, cement plants, pulp and paper industries, ports, power plants, petrochemical and pharmaceutical industry, transformer, machines & other heavy duty OEMs. It also provides cathodic protection to steel and gives good resistance to corrosion at local damaged areas. It is useful in heavy-duty protective paint systems. It is recommended not to expose the primed coat alone to chemical and saline atmosphere for a long time. Physical Data COLOUR : Grey FINISH : Matt SOLIDS BY VOLUME : 50 �± 3% THEORETICAL SPREADING RATE : 10 sq.mt / ltr at DFT of 50 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS (at 30�°C & at 65% Relative Humidity) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to minimum Sa 2 1/2 Standards is recommended with a profile of 35 - 75 microns. The surface should be absolutely dry and salt free before application. The primer should be applied preferably immediately or within 4 hours of blasting. Application Data :- MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray / By Airless Spray THINNER : Epoxy Thinner 190 POT LIFE : 4 hours min at 30�°C RECOMMENDED DFT : 30 50 µ. OVERCOATING INTERVAL : MIN : 8 hours MAX : Infinite COMPATIBILITY : Compatible with Epoxy, PU, Chlorinated Rubber intermediate/finish coat.
1500pcs/h egg tray machine The making machine productive is 1500 pieces per hour, and the rate of output is 4 pieces once. And it can make egg trays, egg boxes, apple trays, meat portion trays, vegetable portion trays, fruit portion trays, wine packs, can trays, seed pots, seed cubes, shoe stretcher etc. Meanwhile, we can special-order any types according to your requirements. Introductions: 1. Raw materials: (for step 1) A. Pulp Board Different pulp made by bulrush, straw, bagasse, bamboo, wood etc. B. Waste Paper Such as paper board, carton, newspaper, magazine, waste pulp. C. Plant Fiber Palm fiber, straw fiber, sugarcane fiber etc. 2. Configures: For step 1: Hydrapulper, Pulp Pump, For step 2: Air Compressor, Agitator, Self Priming Pump, Pulping Machine. Egg tray Forming Machine, Vacuum Pump, High Pressure Washer, Pressure Tank, Mould, Transfer Mould, Baler,Low Vacuum Filling Machine. For step 3: Induced Draft Fan, Conveyor, Fan, Mesh Bag Actuator, Dry Iron Roller, Mesh Belt Slide, Mesh Belt Bag. 3. Drying methods: (you can choose the best one which fits your order) 1.Single Brick Drying Line. 2.Single Metal Drying Line. 3.Multi Metal Drying Line.
JMR Brass Industries is leading manufacturer, exporter, and supplier of a superior quality range of LPG Mixing Tubes. These are broadly used in the areas where high capacity and advanced temperature are required. These are robust, tough and easy to use products. Each of our products is featured with cast construction with flanged connections for minimal pressure. The burner top is made from using high-quality brass, procured from reliable vendors. Clients can obtain our burner tops in different sizes and finish as per their requirements. We coat Gas Stove Brass Burner with anti-corrosive materials and offer to clients at the affordable prices. Brass LPG Gas Stove Burner Cap Set of 2 ( Big & Small ) Suitable For All Brands Gas Stove How it works? Brass is an alloy of copper and zinc which looks more beautiful in gold color. They�¢??re perfect for both outdoors and indoors because it can withstand even in unpleasant conditions. The major advantage of using this brass burner is that it provides superior heat and distributes evenly to the pots or containers for cooking delicious food. Pros: Easy to setup. Corrosion resistant. Highly durable nature. Can withstand weather conditions �¢?? rain and cold. Standing Pilot Some of the gas burner gas stoves do come with standing pilot option. It means that the flame constantly burns under the cooktop. As it generates the flame constantly, consumes more energy than other gas stove models. Moreover, it comes in a simple design structure ISI is abbreviated as Indian Standard Institute. It is actually a standard certification mark in India developed by BIS- Bureau of Indian Standards. It is mandatory to have ISI- certified for certain products to sell in India, especially the electrical and electronic home appliances- switches, cables, motors, heaters, etc.
JMR Brass Industries is leading manufacturer, exporter, and supplier of a superior quality range of LPG Mixing Tubes. These are broadly used in the areas where high capacity and advanced temperature are required. These are robust, tough and easy to use products. Each of our products is featured with cast construction with flanged connections for minimal pressure. The burner top is made from using high-quality brass, procured from reliable vendors. Clients can obtain our burner tops in different sizes and finish as per their requirements. We coat Gas Stove Brass Burner with anti-corrosive materials and offer to clients at the affordable prices. Brass LPG Gas Stove Burner Cap Set of 2 ( Big & Small ) Suitable For All Brands Gas Stove How it works? Brass is an alloy of copper and zinc which looks more beautiful in gold color. Theyâ??re perfect for both outdoors and indoors because it can withstand even in unpleasant conditions. The major advantage of using this brass burner is that it provides superior heat and distributes evenly to the pots or containers for cooking delicious food. Pros: Easy to setup. Corrosion resistant. Highly durable nature. Can withstand weather conditions â?? rain and cold. Standing Pilot Some of the gas burner gas stoves do come with standing pilot option. It means that the flame constantly burns under the cooktop. As it generates the flame constantly, consumes more energy than other gas stove models. Moreover, it comes in a simple design structure ISI is abbreviated as Indian Standard Institute. It is actually a standard certification mark in India developed by BIS- Bureau of Indian Standards. It is mandatory to have ISI- certified for certain products to sell in India, especially the electrical and electronic home appliances- switches, cables, motors, heaters, etc.
JMR Brass Industries is leading manufacturer, exporter, and supplier of a superior quality range of LPG Mixing Tubes. These are broadly used in the areas where high capacity and advanced temperature are required. These are robust, tough and easy to use products. Each of our products is featured with cast construction with flanged connections for minimal pressure. The burner top is made from using high-quality brass, procured from reliable vendors. Clients can obtain our burner tops in different sizes and finish as per their requirements. We coat Gas Stove Brass Burner with anti-corrosive materials and offer to clients at the affordable prices. Brass LPG Gas Stove Burner Cap Set of 2 ( Big & Small ) Suitable For All Brands Gas Stove How it works? Brass is an alloy of copper and zinc which looks more beautiful in gold color. Theyâ??re perfect for both outdoors and indoors because it can withstand even in unpleasant conditions. The major advantage of using this brass burner is that it provides superior heat and distributes evenly to the pots or containers for cooking delicious food. Pros: Easy to setup. Corrosion resistant. Highly durable nature. Can withstand weather conditions â?? rain and cold. Standing Pilot Some of the gas burner gas stoves do come with standing pilot option. It means that the flame constantly burns under the cooktop. As it generates the flame constantly, consumes more energy than other gas stove models. Moreover, it comes in a simple design structure ISI is abbreviated as Indian Standard Institute. It is actually a standard certification mark in India developed by BIS- Bureau of Indian Standards. It is mandatory to have ISI- certified for certain products to sell in India, especially the electrical and electronic home appliances- switches, cables, motors, heaters, etc.
Product Name: MERKASOL 15: Mercaptazine special product for precipitating heavy metals from wastewater (including cadmium, copper,lead, mercury, nickel and silver) Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA "
Stainless steel porous gas sparger/diffuser is also called sintered metal distributor, also known as porous metal distributor. In order to make sure that the air bubbles are distributed equally throughout the container, it is an industrial sparger instrument that distributes gas into a liquid tank. The surface is normally metallic gray, the dense part is a bright surface, the powder sintered part is a normal matte surface, the sintered part does not add any additives in the production process, normal vacuum sintering, the powder is naturally bonded and formed, the aperture is formed naturally, and there is a certain pressure ability. Stainless steel porous gas spargers/diffusers are commonly used for stripping, mixing or diffusion in many gas-liquid contacting applications. So whether it's for beverage carbonation, ozone treatment or chlorine bleaching, it can always help you to increase the efficiency of spraying. The sintered porous metal media is durable enough to last a long time, providing repeatable performance cycles. Product parameters Materials: Stainless Steel 304L/316L, Inconel, Hastelloy, Copper Connection Type: M5 thread with O-ring groove, 10-32 UNF thread, hose barb, NPT, butt weld end Porosity: 15%-55%
1500L Steam Mash Tun is a vessel used in the mashing process to convert the starches in crushed grains into sugars for fermentation. TBE Steam Mash Tuns are insulated to maintain a constant temperature. The Steam Mash Tun can be single-function or can also have a false bottom and spigot so that the sparging process can be done in the same vessel. Steam jacket design will allow The TBE systems are designed to do both decoction mashing and infusion mashing. The mashing tun/kettle is made out of stainless steel or copper. Function: Grain mashing Tank Capacity: 1500L (+25% Headspace minimum) Dimension: 1560mmx2650mm Interior Shell: SUS304 full welded; TH=3mm Exterior Shell:SUS304 full welded; TH=2mm 100% TIG welding with pure argon gas shield Interior Finish: Overall polishing to 0.4~0.6 um without dead corner Insulation: Rock wool; TH=80mm Heating: Steam Steam Jacket: Dimple plate on bottom and side Dished top and sloped bottom Stainless steel top mounted manway 360 coverage CIP spraying ball 4pcs completely SUS304 heavy duty legs with leveling pad Thermowell for high accuracy temperature sensor
Aluminium scrap are used for recycling process because of their optimam usage, high competitive price, lightness, corrosion resistance and strength. Aluminiums weigh generally around a third of the weight of the equivalent sized steel component, with much better corrosion resistance. We will offer you various forms of scraps like rod, plate, wire, cable, wheel, shredded, clipping, heavies, die cast, girder, can, tank, mix materials, etc. Used: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Product Details: Jacksun Copper Spl- E 7018-1 HSS Welding Rod At Royal Welding Wires, For Construction Ws / sfa 5.1 e 7018 is 814 eb 5426 h3 jxlow hydrogen welding electrode for mild & medium tensile steelscharacteristicsa basic coated, low hydrogen, iron powder type all position electrode, operates on both ac & dc. The slags are easily removable and the welds are of radiographic quality. The weld metal possesses good mechanical properties. An ideal electrode for all types of fabrication including heavy joints under restraint and joints subject to dynamic loading. Typical for pressure vessels, boilers, pipelines, ship building, wagons, coaches, earth moving equipments, atomic reactor shells, blast furnace steel work, penstocks, heavy machinery, cranes, tanks and vessels. 2.00 mm - 60 - 100 Amps 3.15 mm - 100 - 140 Amps 4.00 mm - 140 - 190 Amps 5.00 mm - 190 - 250 Amps
Specifications ceiling mounted dehumidifier Optional refrigerant. one year warranty OEM and ODM available 20L/D ceiling mounted dehumidifier with CE and Rohs certificate with wooden box packing Features: 1. Adopt imported famous brand compressor, high efficiency and stable. 2. Adopt quality inner grooved copper tube and high efficient hydrophilic Aluminum film. 3. Real time humidity display, free setting and control. 4. Controlled by timer or humidity. 5. Failure alarming and self-protection. 6. The machine can connect with air hose or new air hose of central air conditioning directly. Parameter: Model:HK-20G Humidity Removal:20L/D Power Source:220V/50HZ Rated Power Input:400W Rated Power Current:2.5A Circulating Air:450m3/h Water tank:10L Work Temperature:5-38oC Product dimension:545*375*200mm Packing dimension:600*440*295mm Refrigerant:R134a Net Weight:18Kg Gross Weight:20Kg Applying Space:10~25m2 Service: 1. one year warranty. 2.24 hours service line. 3.cheap spare parts after one year. 4.OEM & ODM available.
Welcome to visit our website for more information and quotation Website: http://www.Foodprocessingm.Com This automatic frozen potato chips line is automatic from feeding material to finished potato chips. Â Introduction: â 1, pre-washing machine: by elevator, the potato will come into the pre-washing machine, by brush roller and water spraying to remove the mud on the surface of potato. The electrical is schneider, and frequency control motor. The frequency converter from japanese mitsubishi. After pre-washing, the potato will come into the emery peeling machine to remove the peel. Â 2, emery peeling machine: after processed by emery roll and water spraying , the peel will be removed. Total 12 pcs of emery roller. At the bottom , it is with one water tank to recycle use the water, thus, it can saving water. The potato will be discharged automatically by screw. Peeling time is adjustable, frame all with 50*50*2mm, superior stainless steel 304 tube, bearing is made of stainless steel 316 bearings. All motors are with superior copper wire and adjustable-speed, working speed is adjustable. 3, all machines are made of stainless steel 304. -
Welcome to visit our website for more information and quotation Website: http://www.Foodprocessingm.Com This automatic frozen potato chips line is automatic from feeding material to finished potato chips. Â Introduction: â 1, pre-washing machine: by elevator, the potato will come into the pre-washing machine, by brush roller and water spraying to remove the mud on the surface of potato. The electrical is schneider, and frequency control motor. The frequency converter from japanese mitsubishi. After pre-washing, the potato will come into the emery peeling machine to remove the peel. Â 2, emery peeling machine: after processed by emery roll and water spraying , the peel will be removed. Total 12 pcs of emery roller. At the bottom , it is with one water tank to recycle use the water, thus, it can saving water. The potato will be discharged automatically by screw. Peeling time is adjustable, frame all with 50*50*2mm, superior stainless steel 304 tube, bearing is made of stainless steel 316 bearings. All motors are with superior copper wire and adjustable-speed, working speed is adjustable. 3, all machines are made of stainless steel 304. - -
Welcome to visit our website for more information and quotation Website: http://www.Foodprocessingm.Com This automatic frozen potato chips line is automatic from feeding material to finished potato chips. Â Introduction: â 1, pre-washing machine: by elevator, the potato will come into the pre-washing machine, by brush roller and water spraying to remove the mud on the surface of potato. The electrical is schneider, and frequency control motor. The frequency converter from japanese mitsubishi. After pre-washing, the potato will come into the emery peeling machine to remove the peel. Â 2, emery peeling machine: after processed by emery roll and water spraying , the peel will be removed. Total 12 pcs of emery roller. At the bottom , it is with one water tank to recycle use the water, thus, it can saving water. The potato will be discharged automatically by screw. Peeling time is adjustable, frame all with 50*50*2mm, superior stainless steel 304 tube, bearing is made of stainless steel 316 bearings. All motors are with superior copper wire and adjustable-speed, working speed is adjustable. 3, all machines are made of stainless steel 304. -
Sintered Copper Brass Vent Plug Porous Metal is a type of venting device that is used to release built-up pressure or vacuum in a sealed system, such as a hydraulic or pneumatic system. It is made by compressing brass powder into a desired shape, and then sintering it at high temperatures to create a strong and porous material. Parameter Brand: TOPTITECH Material: Brass Porosity: 30-70% Filtration degree: Max. Pressure: 20 bar Working temperature: 300 â?? Model: M5,1/8â??,1/4â??,3/8â??,1/2â??,3/4â??,1â?? Application Sintered brass vent plugs are used in a variety of applications across many industries. Here are some of the common applications of sintered brass vent plugs: 1.Hydraulic and pneumatic systems: Sintered brass vent plugs are commonly used in hydraulic and pneumatic systems to release built-up pressure or vacuum. They help to protect system components from damage and ensure the safe and efficient operation of the system. 2.Automotive industry: Sintered brass vent plugs are used in automotive applications to vent pressure or vacuum in sealed systems, such as fuel tanks or transmissions. They help to prevent damage to the system and maintain proper performance. 3.Aerospace industry: Sintered brass vent plugs are used in aerospace applications to vent pressure or vacuum in sealed systems, such as fuel tanks or hydraulic systems. They help to ensure the safe and reliable operation of the aircraft. 4.Industrial applications: Sintered brass vent plugs are used in a wide range of industrial applications, such as filtration systems, chemical processing equipment, and pneumatic tools. They help to prevent damage to equipment and maintain proper performance. 5.Medical equipment: Sintered brass vent plugs are used in medical equipment to vent pressure or vacuum in sealed systems, such as respirators or infusion pumps. They help to ensure the safe and reliable operation of the equipment.
Power transformer Transformer working for medium frequency induction furnace, electric arc furnace, continuous casting machine, rolling mill steel plant. 220kV, 110kV and 66kV low loss series transformers; products with reliable performance, low partial discharge, low loss, low noise, high reliability, and strong resistance to sudden short circuit, its excellent performance has won the majority of users and related Experts highly praise. Partial discharge: at 1.5 times the rated voltage, the apparent discharge of the product is less than 80pC; Noise: Product noise of 63MVA and below is below 58dB (AN); Loss: No-load loss is about 30% lower than the IEC standard; Reliability: All in-service products have no damage accidents and oil leakage; Short-circuit resistance: SFZ11-50000 / 132 has passed the short-term ability test of the Netherlands KEMA and the National Transformer Quality Supervision and Inspection Center laboratory. Passed CE, UL, CSA, ROSH certification Coil: A All coils are made of 100% oxygen-free copper, and high-voltage coils are tangled. Continuous structure, in order to improve the distribution characteristics under impulse voltage, to obtain a more uniform electric field distribution, the bracing pads are rounded to improve the high reliability of insulation. A Iron core: The core material is high-quality cold-rolled silicon steel sheet with high magnetic grain orientation, and adopts advanced German Georg automatic shearing line to control the burr of the cutting mouth to be less than 0.02 mm. The silicon steel sheet adopts the technology of not stacking the iron yoke. The joint of the silicon steel sheet is a 45 �° full oblique stepped joint. After the iron chip is stacked, the overall pressure and epoxy glue are used to make the iron core three-pillar two yoke become a strong , Flat, high vertical accuracy, effectively improve the no-load performance, while reducing noise. Between the iron core column and the inner coil, the iron core column is supported by a brace plate, the iron yoke is tensioned by a glass ribbon impregnated with epoxy resin, and the lower iron yoke and the lower fuel tank are topped by a back pressure nail bolt. In addition, the upper iron yoke and the upper fuel tank are fixed in three places, so the body can withstand the bumps during transportation without displacement in the fuel tank.
3003 aluminum coil is a common aluminum alloy coil, mainly composed of aluminum and manganese, with good corrosion resistance, workability, and welding properties. Its main uses include manufacturing various types of oil tanks, pipelines, pressure vessels, food and chemical processing equipment, etc. The product characteristics and application scope of 3003 aluminum coil are as follows: Good corrosion resistance, suitable for equipment and structures working in harsh environments. Good deep-drawing and welding properties, easy to process into various shapes and sizes of products. Smooth surface, easy to perform surface treatment and painting. Widely used, including manufacturing automobile parts, building materials, power equipment, electronic components, food packaging, etc. Overall, 3003 aluminum coil is a high-quality aluminum alloy material with good physical and chemical properties, suitable for production and manufacturing in various industrial and civil fields. 3003 aluminum coil is an aluminum-manganese alloy coil, whose main components include: Aluminum (Al): accounting for about 98% of the aluminum coil, it is the main component, with lightweight, high strength, good conductivity, and thermal conductivity. Manganese (Mn): accounting for about 1%~1.5% of the aluminum coil, it can increase the strength and hardness of the aluminum coil, improve its corrosion resistance and weldability. Other elements: 3003 aluminum coil may also contain small amounts of copper (Cu), iron (Fe), silicon (Si), and other elements, as well as trace impurities. The content and proportion of these components will have a certain impact on the performance of 3003 aluminum coil. For example, the content of aluminum and manganese has an important influence on its hardness and strength, and the addition of copper, iron and other elements can improve the heat treatment and processing properties of aluminum coil. Therefore, precise control of its chemical composition is needed during the production of 3003 aluminum coil to ensure its stable performance and excellent quality.
Description Two component Epoxy based anti corrosive primer pigmented with Zinc Chromate as corrosion inhibiting pigments. Recommended Use :- It is recommended as primer on M.S surface for original equipment manufacturing as well as for process industry as in various fertilizer, refineries, petrochemical, chemical and other plants, applied in diverse areas of tank exteriors, equipments, pipelines, structural steel, etc. Not to be used for immersion application. Physical Data COLOUR : Assorted FINISH : Matt SOLIDS BY VOLUME : 40 ± 3% THEORETICAL SPREADING RATE : 13.33 sq.mt. / ltr. at recommended DFT of 30 �µ FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C DRYING CHARACTERISTICS : SURFACE DRY : 60 90 minutes (At 65% Relative Humidity & at 30�°C) : HARD DRY : Overnight FULL CURE : 7 days SHELF LIFE : BASE : 6 months HARDENER : 6 months Surface Preparation Abrasive blasting to Sa 21/2 Swedish Standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3 std. The surface should be absolutely dry, moisture and oil free before primer application. Application Data MIXING RATIO : Base : Hardener (As per our recommendations) APPLICATION : By Brush / By Conventional Spray THINNER : Epoxy thinner 190 POT LIFE : 4 hours min at 30 C RECOMMENDED DFT : 30 - 40 au. OVERCOATING INTERVAL : MIN : 8 hours MAX : 24 hours COMPATIBILITY : Can be over coated with Epoxy, PU, Chlorinated rubber and Oleo-resinous topcoats. Application Method Stir the Base part thoroughly. Mix the base and hardener as per our recommended ratio, by volume. Stir the mix gently to attain homogeneity. Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add Epoxy Thinner into the mix, if required, depending on application method, and stir gently for few minutes. Strain the paint through Nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipments used for above should be properly cleaned. Application :- By Brush / By Conventional Spray / By Airless Spray Generally no thinner is required for Brush application, however under adverse environmental conditions about 5% of thinner, by volume, can be added. Apply evenly in criss-cross manner and ensure the uniform application. Use quality brushes for paint application For Conventional Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Nozzle Orifice : 1.2 -1.4 mm Nozzle Pressure : 40-70 psi For Airless Spray application :- Thinner : Epoxy Thinner 190 Addition : 10-15% Addition : Max 5% if required Nozzle Orifice : 0.37- 0.42mm Nozzle Pressure : 1400-1800 psi