Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Diode laser hair removal machine OEM logo Medical CE vertical 808nm diode ndyag laser hair removal epilator 808nm diode laser Model: QM-808+ Applications: For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle: Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the most safe, technology for permanent hair removal now.It is performed using gold standard 755nm+808nm+1064nm diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle.Meanwhile, contacting surface cooling technology applied on the Sapphire Dual-Chill Tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety. Specialty of QM-808+: ** New Medical and Elegant design ** Handpiece Specifications Technical Specifications: Laser Type Diode Laser Laser Stacks Power 1000-1600W Wavelength (Spectrum) 808nm/755nm+808nm+1064nm Energy Density (Fluence) 166J/cm2 (Continuously adjustable) Spot Size 15x15mm2 Dual chiller 25*25mm Pulse Repetition Rate 1-10Hz Pulse Duration 10-400ms Pulses Single Cooling +Continuous Sapphire contact cooling(-5�ºC~1�ºC) +Air cooling +Closed water circulation cooling Stand-by Working Continuously for 20 hours Display 10" True Color LCD Touch Screen Electrical Requirements 110/230VAC, 15/20A max., 50/60Hz Net Weight 55kgs Dimensions (WxDxH) 450*550*1000 mm
Applications For any unwanted hairs on areas of face, arms, armpits, chest, back, bikini, legs and etc. (including light, blond and thin hairs) Working Principle Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicles; light can be absorbed and converted into heat damaged hair follicle tissue, so that hair loss regeneration without injury surrounding tissue. Slight pain, easy operation, the safe, technology for permanent hair removal now. It is performed using gold standard 808nm or Triple-wavelength(755nm+808nm+1064nm) diode laser technology, with energy penetrates deep into the dermis with high average power and a rapid 10 pulse-per-second repetition rate to heat the hair shaft and hair follicle, rather than destroy the oxygen organization around hair follicle. Meanwhile, contacting surface cooling technology applied on the Sapphire tip can eliminate the heat effect attributed to optical energy, greatly improving both the treatment performance and safety.
Applications 1.Permanent hair removal for all skin types and all hair colors! 2. Skin rejunvenation 3. Pigments removal 4. Wrinkle removal 5. Acnes removal 6. Vascular Removal Working Principle It is a revolutionary approach, rather that bombarding your skin with high amounts of damaging energy. SHR fires multiple shots but at low Joules, in doing so it gently heats the hair follicle to the heat needed and the most you will feel is warmth and a tingling sensation, some clients comparing it to a warm massage. SHR also utilizes In-Motion technology, where the hand piece is always in motion over the skin.
Applications Traditional Fractional Model and Surgical Mode: Skin renewing and resurfacing Wrinkle removal, skin tightening Acne and scar removal, melasma removal Smooth scars like burn, surgery, traumatic, and stretch marks, etc Remove intractable chloasmas and pigmentation Sun damage recovery Vaginal tightening and Vaginal Mode: Tighten vagina Fast tightening, lasting constriction, tightness to improve 60%; Clean the vagina Deep anti-aging, young level to improve 80%; Moist vagina Improving secretion, moisture level to improve 80%; Pink vagina Vulva rejuvenation, lighten pigment and pinks labia parts, delicate degree to improve 70%
Applications 1.Skin Tightening 2.Wrinkle Removal 3.Eyes' area treatments 4.lncrease skin elasticity 5.Fat and cellulite reduction 6.Face wrinkle removal & lifting 7.Warm vacuum cellulite massage 8.Body slimming, contouring & shaping 9.Promote cell metabolism, improveblood circulation Working Principle 940nm Infrared laser reduces skin impedance by heating skin and RF energy penetrates deeply into connective tissue; The synergistic combination of infrared laser and conducted Bipolar RF energies increase the oxygen intracellular diffusion by heating the skin Vacuum plus specially designed rollers manipulate leads RF penetration to be even 5-15mm. At the same time, Cavitation and Rollers mechanical tissue manipulation nips and stretches fibrillar connective tissue, effectively breaks down subcutaneous fat as well as extruded capillary vessel, Increase lymphatic drainage, promotes metabolism and reduces or shrinks the size of the actual fat chamber and greatly improved body contouring effect; The technology that vacuum folds skin makes RF energy penetrate a specific folded skin, greatly improve effect and safety, even for the upper eyelid area treatment
Applications 1.Skin Tightening 2.Wrinkle Removal 3.Eyes' area treatments 4.lncrease skin elasticity 5.Fat and cellulite reduction 6.Face wrinkle removal & lifting 7.Warm vacuum cellulite massage 8.Body slimming, contouring & shaping 9.Promote cell metabolism, improve blood circulation
Empower your healthcare environment with our innovative PU Coated Pillow Protector. Designed to meet the highest standards of safety and reliability, this protector offers exceptional infection control with fluid resistance, anti-bacterial, and anti-fungal properties. Its breathable yet protective nature ensures comfort without compromising safety. This fabric is easy to clean with alcohol, and you can be worry-free as the fabric is flame-retardant and safe for babies. It is also washable up to 50 times at 90�°C and can be sterilized through autoclaving, making it easy to maintain and durable. Additionally, it meets stringent environmental and health standards, being eco-friendly, phthalate-free, and BPA-free. Certified medical grade (CE, TUV, SGS, ISO 13485), this pillow protector is not only functional but also cost-effective, providing an effective infection control solution that is eco-friendly and economical for hospital operations.
Elevate your healthcare environment with our cutting-edge PU Coated Mattress Protector. Engineered to uphold the highest standards of safety and reliability, this protector excels in infection control with its fluid-resistant, anti-bacterial, and anti-fungal properties. Its breathable yet protective design ensures comfort without compromising safety. The robust and reinforced fabric is designed for enhanced strength, making it perfect for mattress protection. Cleaning is simple with alcohol, and the fabric is flame-retardant and safe for babies. It is also washable up to 50 times at 90�°C and can be sterilized through autoclaving, ensuring ease of maintenance. Adhering to strict environmental and health standards, it is eco-friendly, phthalate-free, and BPA-free. With medical-grade certifications (CE, TUV, SGS, ISO 13485), this mattress protector combines functionality and cost-efficiency, delivering an effective and sustainable infection control solution for hospital operations.
Spirulina Blubio® spirulina 100% pure, characterized by a high content of vitalizing substances: vital amino acids, vitamins, minerals, trace elements as well as bata-carotene, essential fatty acids and enzymes, in balanced and natural form. This makes it possible for blubio® 100% pure spirulina to support the metabolism and power of self-healing in an optimal manner. Through its alkaline character, it can contribute in a simple way to countering the excess acidity of your body. Specification: 400mg per tablet, 180 tablets/500 tablets per bottle Packing: General package: 48 pet bottles per carton
Navigation System .
Borosilicate glass test tube.
The cabin of the oxygen chamber is made of aluminum alloy material, it is durable. The All-in-one control system provides one-button control, which is intelligent, easy-handling and convenient to operate. Can support multiple persons simultaneously, watching movies, reading books, and using computers are all available. Main Features of Hard Type Hyperbaric Chamber All-in-one control unit LCD display Timing function Precise pressure level View oxygen, temperature, humidness PSA technology The cabin of the multiplace hyperbaric chamber for sale is made of aluminum alloy material, it is durable. The All-in-one control systems provide one-button control, which is intelligent, easy-handling, and convenient to operate. One person enjoys relaxation time without disturbed If you need any kinds of oxygen concentrator machine, please contact us, as one of the most professional medical oxygen equipment manufacturers, Canta Medical is willing to offer you high quality products.
The hot sale soft lying type hyperbaric chamber, which is portable and convenient for home care. The size of 80*225cm can accommodate one adult with one child lying in it. Main Features of Lying Type Portable Soft Hyperbaric Chamber Large transparent windows Two-side pressure gauge Emergency valve 2 zippers Easy to operate by one person without an assistant. 93% medical oxygen purity The lying type is more comfortable and allows you to rest. There are many oxygen machine manufacturers, but we are one of the best choices for you.
Non woven fabric.
Baby Diapers..
High quality medical mattress.
Medical And Super Market Rack..
Laser+QR Code+Reflector Hybrid Navigation Collaborative Robots in Automotive Manufacturing 12kg Collaborative Robots Payload(kg) Collaborative Robots in Manufacturing 1150mm Operation Radius Collaborative Robots Industry 4.0 ±1mm Positioning Repeatability Cooperative Robots 2/ 8 Runtime (H) Industrial Collaborative Robots 0.5 Machine Vibration(g) MORA: MORA Collaborative fast pick and place robot, collaborative industrial robots, computer integrated automated manufacturing software, Computer Automated Manufacturing Electronics Robots. Basic Chassis length 650mm Battery Lithium-ion 48v 70Ah Safety Standard dual lasers; front/rear 3D cameras; Parameters Chassis width 1000mm Charge time 2H System bumper; lasers for vertical protection; Bidirectional Runtime 8H single-point laser (optional); Self weight 300kg hole detection; sound and light alarm. Performance Manipulator rated load 12kg Customized Noise 75db Max. slope 5% Machine vibration 0.5g Ground fatness 10mm/m2 Ground clearance 35mm Height above ground 25mm Still tolerance 10mm Repeatability ±1mm Communication IEEE 802.11 a/g/b/n/ac/ax 2.4/5GHz, 5G optional Mora Robot Main Function Obstacle Detect and Auto Stop Intelligent Obstacle Avoidance Easy Integration With Third Party Facilities Auto Positioning and Navigation Intelligent Route Planning Man/Machine/Fleet Cooperation Dual Way Movement (Forward/Backward) Optional Wafer Box/Tray Cnc Machining Flexible Turnover Auto Charging Mora Robot Order Picking System Advantages Accuracy onfiguring with vision system, docking accuracy ±10mm, picking accuracy ±1mm Flexible Intelligent autonomous navigation, 30 meters laser detection distance, agile obstacle avoidance, suitable for mixed man-machine operation. Safety Anti-static design, anti-collision bumper, no need safety fence. Easy to Use Graphical programming. Easy to operate and connect by Mobile phone and PAD wirelessly. Quick Integration Modular system for fast integration of various applications. We can provide kinds of warehouse picker robots for sale, and the price of autonomous mobile robots in warehouse is reasonable, if you want to buy robot that picks up things , please contact us. Now the amr robot cost is reasonable, if you have needs, please leave us a message.