Product overview It is a mixture of polymer and surface active agent. This agent is a high-efficiency deposit control agent and repulping auxiliary agent that can be used directly on paper, paperboard and pulping systems, so as to control various deposits. Regardless of whether the sediment is derived from resin, broken paper or secondary fibers, it is an excellent cleaning agent. This product is suitable for neutral, acidic, and alkaline systems. It can prevent the resin, viscose, paint stickies and other wet hydrophobic pollutants from being accumulated in the paper and pulp machine felts, thereby making the felts clearer, the paper more efficiently, and the service life of the felts longer. Technical specifications �· Appearance: Light yellow liquid �· Density: 0.88-0.95 g/cm3 �· pH value (10% of water solution): 6-10 �· Solubility: Completely soluble in water, but insoluble in most organic solvents Performance characteristics 1. Improve the operating stability of the squeezing section 2. Prevent the hydrophobic pollutants such as resin and viscose being accumulated on the paper machine felt 3. It can keep the uniformity of the air permeability of the blanket for a long time, and makes the blanket's service life longer 4. Improve product quality and reduce unplanned shutdown time to clean blankets 5. It can frequently utilize secondary fibers and enhance economic benefits. Usage tips The amount can be varied from the paper types. The recommended dosage is 4-10 ml/min/m of fabric or roll width. The low-pressure spray water can be used to spray the forming net and coarse calico paper surface. Packing and storage This product is packed in plastic buckets, 200kg or 1000kg of per plastic buckets. This product shall be stored in a shaded, cool and dry condition at room temperature, shelf life: 6 months. This product is not dangerous.
Product Name: Dried Mealworms Product Description: Dried mealworms are a high-protein, low-fat insect product commonly used in animal feed, human food, and nutritional supplements. They are an ideal food source for birds, reptiles, small mammals, and are also gaining popularity among humans as a healthy, protein-rich snack. Key Features: High Protein Content: Dried mealworms contain approximately 50-60% protein, making them an excellent source of protein. Low Fat: Compared to some traditional protein sources, dried mealworms have relatively low fat content. Rich in Micronutrients: They are packed with essential vitamins, minerals, and amino acids, including calcium, iron, zinc, selenium, and B vitamins. Sustainable: The production of dried mealworms has a minimal environmental footprint, requiring less water and land resources. Versatile: They can be used in pet food, wild bird food, fish food, baked goods, protein bars, and protein powders. Uses: Pet Food: Dried mealworms are used in the production of high-protein pet foods such as dog and cat kibble. Wild Bird Food: Bird enthusiasts often use dried mealworms as a bird food source, providing high-quality protein and energy. Fishing: Dried mealworms can serve as effective bait for attracting various fish species. Baking: Dried mealworm powder can be used to create high-protein baked goods like cookies and protein bars. Protein Supplements: Humans can also incorporate dried mealworm powder into protein shakes, smoothies, and nutritional supplements to boost protein intake. Packaging: Typically available in various packaging options, including plastic bags, bottles, and bulk bags, to cater to different customer needs. Storage: Dried mealworms should be stored in a cool, dry place away from direct sunlight. Sealed packaging can extend the shelf life. Shelf Life: Under appropriate storage conditions, dried mealworms typically have a shelf life of several months to over a year.
Immerse yourself in the luxurious world of Organic Argan Oil, a golden elixir renowned for its exceptional skincare and haircare properties. Our Argan Oil is sourced from the pristine landscapes of Morocco, where centuries-old traditions converge with modern expertise to create this exquisite, pure, and additive-free beauty staple. Extracted from the kernels of the Argania spinosa tree, Organic Argan Oil is a testament to nature's bounty. Rich in essential fatty acids, vitamin E, and antioxidants, this multipurpose oil is a potent ally in nurturing skin and hair. Its lightweight texture allows for easy absorption, leaving no greasy residue behind. For skin, Organic Argan Oil's deep hydration and revitalizing effects make it a versatile solution for all skin types. Its nourishing qualities help restore elasticity and promote a youthful appearance. From moisturizing dry areas to soothing irritation, this oil is your go-to for achieving a luminous and healthy complexion. When it comes to hair, Organic Argan Oil's transformative abilities are equally impressive. It tames frizz, adds shine, and enhances manageability, leaving hair soft and lustrous. Whether used as a leave-in treatment or as a finishing touch, its non-greasy formula promotes healthy-looking locks. Our commitment to purity is unwavering â?? our Organic Argan Oil is sourced from Morocco and is 100 percent pure, free from additives, and unadulterated. Our partners uphold the time-honored methods of cold-pressing to preserve the oil's integrity, ensuring you receive the full spectrum of its benefits. Embrace the beauty secret of Moroccan tradition with our Organic Argan Oil. From head to toe, it's a versatile and indulgent addition to your self-care routine, allowing you to experience the nourishing power of nature in its purest form.
Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use Model TIG200 TIG250 TIG250PFC ACDC TIG300 ACDC TIG400DC TIG500DC TIG500 ACDC Rated Input Voltage(V) 1~230 3~400 95-275 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 33 30 25 22 31.5 43 43 No-load Voltage(V) 68 68 68 70 70 70 70 Power Factor 0.65 0.7 0.99 0.7 0.7 0.7 0.7 Output Current Range (A) 5-200 5-250 10-250 5-300 5-400 5-500 10-500 Duty Cycle(%)40C�° 25% 60% 25% 60% 60% 60% 60% Efficiency(%) 80 80 80 80 80 80 80 Insulation Class H H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 8.5 12 13 22 22 28 40 Dimension(mm) 410x180x330 410X180X330 410X180X330 410X220X405 650X285X510 650X285X510 680X285X510 WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products. Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock. For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement . Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc.
Welding Machine, Tig Welder, Welding Equipment, Arc/MMA/ZX7 Welding Machine, Inverter Welding, Dc Welder, Welding, Welder, Arc Welder, Power Tool, Welding Solder, Tig Welding, Tig Welder, Mig Welding, Ac Welding Machine, Plasma Cutter, Cutting Machine, Plasma Cutting Machine, welding helmet and power tools. Features: 1.Intelligent interface conversion 2.Adopt IGBT single tube/single module to ensure reliability 3.Unique switching power supply,wide application range of power supply 4.SMT chip design,ensure the duty cycle 5.32-bit microcomputer chip processor,real-time current display 6.Advanced high-efficiency inverter technology,30khz,high working frequency 7.Usable for generator, suitable for field operation 8.Automatically save the parameters of the last operation 9.Overheat,overvoltage,undervoltage protection to prevent machine damage 10.Suitable for acid,alkaline,high strength electrode and other welding electrode 11.Coloered LCD display,easy to use Model MMA 200/200DV MMA 200PFC/250 MMA 300 MMA400 MMA500 MMA 630 Rated Input Voltage(V) 1~230/95~275 95~275/3~400 3~400 3~400 3~400 3~400 Input Frequency(Hz) 50/60 50/60 50/60 50/60 50/60 50/60 Rated Input Current(A) 46 49/17 21 35 45 62 No-load Voltage(V) 68 78/70 70 70 70 70 Power Factor 0.65 0.99/0.7 0.7 0.7 0.7 0.7 Output Current Range (A) 5-200 5-250 5-300 5-400 5-500 5-630 Duty Cycle(%)40C�° 25% 25% 25% 25% 25% 25% Efficiency(%) 80 80 80 80 80 80 Insulation Class H H H H H H Protection Class Ip23 Ip23 Ip23 Ip23 Ip23 Ip23 Weight(Kg) 6/7.5 8.5/11.5 13 17 28 32 Dimension(mm) 360x180x330 410X180X330 410X180X330 650X285X510 650X285X510 680X285X510 WHY CHOOSE US? Q1.Are you manufacturer or trading company? A.We are the only manufacturer of electrical products. Welcome to visit our factory at any time. Q 2. what's the payment term? A. We accept T/T, L/C, WESTERN UNION, PAYPAL etc. Q 3. What's the delivery time ? A. Normal model 1-3days,because we have ability to do the stock. For big order,it takes about 15-20days. Q 4. What is the standard of package? A. Export standard package or special package according to customer requirement . Q 5. what kind of product quality your factory offer? A. We are professional factory and we offer top quality to help client to get more market. Q 6. Do you accept OEM business? A. We do OEM . Q 7.Which market do you already sell? A.We already ship to Europe,America, Oceania etc. Q8. what kind of certificate you have ? A.We have CE, GS, ROHS, EMC etc.
K-LFP48100S is a new type of intelligent battery pack developed by KODU Technology, with built-in cell balance, and a smart monitoring system. It is suitable for the installation of 19-inch cabinets. Intelligent design: intelligent detection, SOC&SOH management, simplified O&M, and self-management. Intelligent collaboration: With the intelligent power system to realize intelligent features (such as intelligent voltage boosting and intelligent hybrid use). Intelligent anti-theft design:Intelligent software lock, displacement lock, and buzzer alarm. High reliability design: integrated BMS design, long service life. Multiple lithium batteries are used in parallel to meet the application requirements of large-capacity sites; Support remote power supply, constant voltage 57V discharge; Energy storage - peak cutting and valley filling; K-LFP48100S has high-energy density, redundant safety design, long life, light weight, easy installation, maintenance-free, remote monitoring Nominal voltage 48V Nominal capacity(25 ,0.5C) 100Ah Nominal energy 25 ,0.5C 4800Wh Weight 40±0.3Kg Cell-positive material LiFePO4 Combination mode 15S1P Dimensions (W * D * H) 443mm*400mm*135.5mm Communication interface RS485&CAN; 2 dry contacts IP rating IP20 Shell material Steel plate baking varnish Cycle life(0.5C, 25 ) 6000 times @80% DOD Design life(25 ) 15 years LED Display Alarm/Run/SOC Electrical parameter Operating voltage 42V-57.6V Maximum charging current (25 ) 100A Maximum discharging current (25 ) 100A Standard charging current (25 ) 50A Standard discharging current (25 ) 50A Recommended charging voltage 54V Discharge cut-off voltage 42V Battery input protection BMS Efficiency 98% Self discharge (25 ) Less than 5% after 90 days storage Internal resistance 40m�© Maximum number of parallels 32 Protection function Overvoltage protection, overcurrent protection, low-voltage protection, over temperature protection, low temperature protection, reverse connection protection, short circuit protection Environment Charging temperature-40~60 (Optional heating film) 0~60 Discharging temperature-20~60 Storage temperature-10 ~45 Relative humidity 5%~95%(non condensing
Something About Art Paper: Raw Materials:The main raw materials of coated paper are cooper plate base paper and coating. Copper plate base paper with bleached chemical wood pulp or with pant of the bleached chemical pulp, bleached chemical straw pulp on the paper machine made by copying. Copper base paper must have uniform thickness small scalability high raw material strength, god water resistance. Paper surface is not allowed to have snots wrinkles holes and other paper diseases, used for coating coating is composed of high quality white pigment (such as kaolin, calcium carbonate, etc., adhesives (such as latex,starch, polyvinyl alcohol, etc.) and auxiliary additives (such as gloss agent, hardener, plasticizer, etc.) Produce Way: Will be composed of high quality white pigment. adhesives and auxiliary additives and liquid days of high solid content of the coating.through the coating machine thin and uniform coating on copper plate base paper, and then dry, roll into a roll on the paper rolling machine, and then by the super calender for calender finishing. Key performance: 100% virgin pulp, High printing gloss, Smooth printing surface High brightness and gloss, Excellent brightness and smoothness Competitive stiffness and caliper ,True color reproduction Specification: Paper Type: Art Paper/Art carg Coating: Coated,Kaolinite,Double Side Compatible Printing: Offset printing Feature: Anti-Curl Pulp Material: Wood Pulp Pulp Style: Virgin Pulping Type: Chemical-Mechanical Pulp Place of Origin: China Custom Order: Accept Size : 889*1194,787*1092,880*730,700*1000 or width >600mm in reel size.And customized size Usage: Book Cover Grammage: 85-400 gsm Thickness: ISO 65-451 um Brightness: ISO 90-92% Glossy: ISO 70% MOQ: 25 MT Whiteness: Glossy:70�±2% Matte:20-28% Packing & Delivery Offset Paper In Reel in sheets or in rolls if sheets,100sheets/ream, then reams/pallets 1*20 ft container can load in about 16 tons 1*40HQ container can load in about 22 tons End-use Printing Magazine,Book,Catalogue,Poster,Annual report,Calendar,Brochure,Advertising post card,Certificate etc.
Simcon®-WPR 1000 Water Proofing & Reducing Type : Pce Based Water Reducing Superplasticizing Set Retarding Concrete Admixture ALL IN ONE TYPE ADMIXTURE DESCRIPTION Simcon®-WPR 1000 Imparts high workability and gives workability retention. USES Simcon®-WPR 1000 a superplasticizer for free flowing con- crete in floor, slabs, foundations, walls, plasters slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of con- crete: Ready mix concrete Pre cast concrete Site batched concrete CHARACTERISTICS / ADVANTAGES Simcon®-WPR 1000 produces a more uniformly cohes-ive high quality free flowing concrete. It has following advantages : Improved water reduction. Improved strength and density Improved consistence retention Improved durability Improved water tightness/ water proofed concrete PRODUCT INFORMATION Improved surface finish Improved cohesion properties Suitable for hot weather conditions Water reduction up to 15-20 % depending on dosage* * This will depend on dosage and mix design Composition Modified Napthalene Formaldehyde Sulphonate Packaging 1KG,5KG,10KG,20KG. Appearance / Colour Dark Brown Liquid/Coffee,Honey Colour Colour Shelf life 24 months from date of production if stored properly in undamaged un- opened, original sealed packaging. Storage conditions Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost. Density ~1.17 kg/l at 25°C pH-Value â?¥ 6 Application Dosage : 250ML Per 50KG Cement Bag Compatibility Simcon®-WPR 1000 may be combined with many other Simcon® products. Important: Always conduct trials before combining products in specific mixes and combinations. Compatible with all types of cement and cemen- titious material APPROVALS / CERTIFICATES International ISO Certified - Dubai Acccreditation Center ISO 9001: 2015 Certified Bangladesh Department Of Environment Certified Bangladesh Fire Service & Civil Defense Certified Bangladesh Fire Service & Civil Defense Certified Our Products Are Also Tested By Buet
HSN Code : 29061100 Synonyms : 2-Isopropyl-5-methylcyclohexanol CAS No. : 2216-51-5 Molecular Formula : C10H20O Application : Menthol Powder & Menthol Medium crystal is a naturally product obtained by the crystallization of L-Menthol Terpeneless which is obtained by fractional distillation of Mentha Arvensis oil. Menthol Powder & Medium rice crystal is a super dry, Transparent, Colour less, with Mint odor, Shining powder and natural cooling properties. Know Numerous Application of Menthol Crystals in Pharma Industries: It is used for a variety of reasons in many products. These include: In nonprescription products - to get temporary relief of minor sore throat and irritation. Example: in cough medicines and in lip balms It has antipruritic properties to reduce itching. It is used as a topical analgesic, to relieve minor aches and pains, such as sprains, muscle cramps, headaches, etc. It can be used alone or combined with other substances such as camphor, eucalyptus oil, or capsaicin. In Europe, it seems to appear as a gel or a cream. Examples: In Tiger Balm or Icy Hot patches Used as a decongestant for chest and sinuses patch, cream, or nose inhaler). Example �¢?? in Vicks Vaporub. It reduces sinus and throat irritation caused by several types of smoking. oral hygiene products and bad-breath remedies, such as toothpaste, mouthwash, mouth, and tongue sprays, and more commonly as a food flavor agent; such as in candies and chewing gums. Uses as a pesticide against tracheal mites � Menthol is used in perfumery to prepare methyl esters which emphasize floral notes. In first aid products produce cooling effects such as "mineral ice"?? as a substitute. In upper gastrointestinal endoscopy - as a smooth muscle relaxant and as an antispasmodic agent. For Food And Beverage: Menthol Crystals add a flavour and fragrance in Chewing Gums, Candies, Confectionaries and other Food Items. These crystals also add a minty flavour to several beverages. For Skin Care: Menthol Crystals are used significantly in skin care products for improving skin texture and health. Calm skin irritation and burning sensation, diminish the black spots and eliminate blackheads and whiteheads. These crystals are widely used in cleansers and moisturizers for their property of deep cleaning and moisturizing skin cells. For Hair Care Products Have properties that nourish and strengthen hair and promote better hair growth, and hence, used in hair care products like shampoos, conditioners, hair oil, creams and masks. Helpful in removing dandruff buildup, eliminating lice and nits, stimulating circulation and promoting better hair lustre to encourage hair growth. For Aromatherapy: Have therapeutic properties and a soothing aroma that makes Menthol Crystals effective in aromatherapies for reducing anxiety and stress. Besides calming the mind and senses, Organic Menthol Crystals� promote a sense of ease.
We use the most advanced anti-corrosion efficient ultra-fine fiber coagulation material as the filter body, so that the compressor output air 3m above the solid particles can be all filtered, and very little about 0.01-m oil and water dissolved in the filter When the condensate into a larger oil droplets, accumulated in the bottom of the filter, and then through the bottom of the filter tank back to the siphon pump back to the lubrication system so that the compressor discharge more pure, oil-free compressed air. Technical Parameters 1. Filtration efficiency 99.999% 2. Service life 3500-5200 hours 3. Filtration accuracy: 0.1�¼s 4. Filter material used US HV company glass fiber 5. Compressed air oil content can reach 3ppm or less We also supply other replacement brands air compressor filter: Atlas Copco air compressor filter element Ingersoll Rand air compressor filter element Fusheng air compressor filter element SULLAIR air compressor filter element CompAir air compressor filter element LIUTECH air compressor filter element Screw air compressor Pipe line filter element isused to filter different dismissal of stainless dry stock,corrosion resistance, superior structural performance; seam welded for extra strength, low resistanceto flow. Different accuracy levels of different filter structure,a new "matrix blended fiber" media, larger effective surface area, improves capurerate, enhanced filtering effect. Coated closed cell foam sleeve with resists chemical attack from oils and acids, ensures high efficiencies by preventing reentrainment of coalesced liquids. Advantages: 1.Duarbility and longevity 2.Beautiful design 3.High quality with reasonable price 4.Afford good service 5.Produce according to your sample or drawing 6.Each product individually tested Features: 1.Type:Precision Filter, Filter 2.Filter material: imported fiberglass, filter felt 3.Filter accuracy: 0.01um 4.Application: air compressor 5.Weight:0.5kgs 6.service time:8~12 months 7.sealing material:NBR, VITON 8.Oil content:0.003ppm 9.Flow rate:5Nm³/min
Features for the California Air Tools 10020DSPC Air Compressor mowerequip....com The CALIFORNIA AIR TOOLS 10020DSPC Ultra Quiet & Oil-Free Air Compressor is designed to be one of the quietest 2.0 horsepower air compressors in the industry having only 58 decibels of sound. Designed for many applications including Dental Offices and Milling Machines. The powerful 2.0 HP motor operates at only 1680 RPM creating less noise, vibration and creating less wear. The Oil-Free Dual Piston Pump System is engineered for longevity, high performance, and durability. The SP-9421 Motor/Pump is tested for a minimum pump life of 3000 hours before service. 30% more life before repair Large 10.0-gallon steel air tank. The Air Dyer is specially designed to remove the water vapor from the air to protect sensitive tools and machinery. To dry the air from the air compressor an Aftercooler and Dryer are utilized. The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the Air Dyer. The sturdy large steel cabinet on caster wheels makes it easier to move and reduces the noise level. The interior of the cabinet is lined with acoustic sound proofing foam insulation to reduce the air compressor's noise and vibration. The two latching door handles allows for easy access to the air compressor.'' The two exhaust fans are designed to remove the air from the cabinet for a cooler running air compressor. This air compressor is ideal for anyone working inside (office, shop, store, warehouse, or home) where noise is a major issue. Activated Alumina is used in air repurification (due to its high water and carbon dioxide adsorption capacity) and adsorption of sulfur compounds. Commercial Use Assembled in USA with global components Air Dyer Includes Activated Alumina desiccant with a 4000-hour life. Oil-Free Pump Cleaner air for better tool operation. Less maintenance and Costs. One 1/4 Industrial female quick connector Two Pressure control gauges Thermal Overload Protector Specifications Sound (Ultra Quiet): 58 decibels Maximum Pressure: 130 PSI Kick On Pressure: 100 PSI Kick Off Pressure: 130 PSI Volts: 110v Hertz: 60 Hz Low Amp Draw: 14.0 Amps Tank fill rate from empty to full: 130 Seconds Recovery time from 100 PSI to 130 PSI: 40 Seconds Duty Cycle: 70/30 Maximum Run Time: 30-60 min. (Depending PSI & CFM) Dimensions: L (26") x W (30") x H (39.5") Weight: 221 pounds Aftercooler: Condenser Horsepower: 2.0HP (Rated/Running) Air Flow Per Minute: 6.40 CFM @ 40 PSI Air Flow Per Minute: 5.30 CFM @ 90 PSI
Caproic acid, capric acid, caprylic capric acid, lauric acid, myristic acid, palmitic acid, stearic acids, oleic acid, dist coconut fatty acids, dist palm kernel fatty acid glycerine usp43/ep, octyl decyl alcohol, octyl alcohol, decyl alcohol, lauryl myristyl alcohol, lauryl alcohol, myristyl alcohol, cetosteryl alcohol, cetyl alcohol, stearyl alcohol palms wax 2020, palms wax 2001, palms wax 2005, palms wax 2030 translucent soap noodles, toilet grades soap noodle (90:10, 80:20, 75:25, 70:30, 60:40 etc.), multipurpose oil saponified soap noodles, laundry soap noodles ( yellow & brown, orange, green )fatty alcohol ethoxylates, sles 70 & sls powder /needles, betaines, cde/cmea, egds/egms, peg, glycols & glycol ethers, ethoxylates, esters (ipp, ipm, 2ehp, mct, smo, dmg, gms etc), mpg, mineral oil, petroleum jelly/petroleum, 2 phenoxy ethanol, formaldehyde.
Meat & Poultry Frozen Mackerel Fish KN95 Face Mask Sodium Bicarbonate Poultry Frozen Squid Sulphuric Acid Urea Fresh Chicken Diapers Soybean Meal Copper Scrap Coriander Powder Rice Metal Scraps Spices Teak Wood Copper Plate Scrap Cumin Powder Teak Wood Logs Fridge Compressor Scrap Grains & Cereals Wood Logs Compressor Scrap Vegetables Fresh Beef Fresh Mackerel Fish N95 Face Mask Rock Salt Finished Leather Fresh Tuna Fish Surgical Face Mask Fertilizers Timber Products Computer Scrap Herbicides Milk Powder Charcoal RAM Scrap Dry Fruits & Nuts Timber Computer CPU Phosphate Rock Milk & Milk Products Chickpeas Motherboard Scrap Pesticides Chocolate & Confectionery Cocoa Beans Computer - RAM & ROM Textile Chemicals Candies Coffee Beans Computer - Motherboards Fungicides Sunflower Oil Green Coffee Aluminium Can Scrap NPK Chocolates Coffee Aluminium Scrap Coffee & Tea Mak.
Palm oil products : crude palm oil, rbd palm oil, rbd palm olein (cp6, cp8, cp10), rbd palm stearin, palm fatty acid distillate(pfad). lauric oil : crude coconut oil, rbd coconut oil, crude palm kernel oil, rbd palm kernel oil, rbd palm kernel olein, palm kernel fatty acid distillate. soft oil : rbd soy bean oil, rbd sun flower oil. specialty fats : shortening, vegetable ghee, margarine, cocoa butter substitutes (cbs), cocoa butter replacers (cbr). oleochemical & soap : soap noodles (80:20 / 90:10) & refined glycerine 99.7% min.We do fob and cif or cnf
We selling below items regular basis. - PC flakes clear/color, POM, Silicon rbr
Dining Furniture PU Leather Backrest Chair Modern Hot Selling Metal Legs Cafe Hotel Luxury Restaurant Chair
Dining Furniture PU Leather Bar Chair Modern Hot Selling Restaurant Dining Metal Base Adjustable Swivel Bar Chair
Product Name CARMOSINE C.I No 14720 Synonyms ACID RED # 14 C.I. Name Food Red-3 Chemical Disodium salt of 2-(4 sulpho -1- IS No 2923:1995 Name Naphthylazo_1-Naphthol-4-Sulphonic CAS No 3567-69-9 Acid EINECS No 222-657-4 SR NO TEST LIMITS 1 Total dye content percent by mass on dry basis 87 (at 105_+1�°C for 2hrs)MIN 2 Loss of drying at 135�°C, sodium chloride and sulphate 13 percent by mass,MAX. 3 Water insoluble matter,percent by mass,MAX. 0.2 4 Combined ether extract,percent by mass,MAX. 0.2 5 Subsidiary dyes,percent by mass,MAX. 1 6 Dye intermediates,percent by mass.MAX. 0.5 7 Heavy metals as pb(mg/kg)MAX. 40 8 Arsenic,(mg/kg). MAX 3 9 lead,(mg/kg) MAX 10
Product Name PONCEAU 4R C.I. NO. 16255 Synonyms ACID RED -18 C.I.NAME Food Red 7 chemical Trisodium2-hydroxy-1-(4-sulfonato-1- IS No. 2558:1994 name naphtylazo)-naphtalene_6,8-disulfonato CAS NO. 2611-82-7 EINECS NO 220-036-2 SR NO LIMITS 1 Total dye content percent by mass on dry basis (at 105_+1�°C for 2hrs.)MIN. 85 2 Loss of drying at 135�°C, Sodium Chloride and Sulphate percent by mass,MAX. 15 3 Water insoluble matter,percent by mass,MAX. 0.2 4 Combined ether extract,percent by mass,MAX. 0.2 5 Subsidiary dyes,percent by mass,MAX. 1 6 Dye intermediates,percent by mass.MAX. 0.5 7 Heavy metals as pb(mg/kg)MAX. 40 8 Arsenic,(mg/kg). MAX 3 9 lead,(mg/kg) MAX 2
SPECIFICATION Product Name TARTRAZINE C.I. NO. 19140 Synonyms Acid Yellow # 23 C.I.NAME Food Yellow-4 chemical Trisodium 5-hydroxy-1-(4-sulfonato phenyl-4- IS.NO 1694:1994 name (4-sulfonato phenylazo)pyrazole-3-carbaxylate CAS NO. 1934-21-0 EINECS NO 217-699-5 SR NO TEST LIMITS 1 Total dye content percent by mass on dry basis 87 (at 105_+1�°C for 2hrs) 2 Loss of drying at 135�°C, Sodium Chloride and Sulphate 13 percent by mass,MAX. 3 Water insoluble matter,percent by mass,MAX. 0.2 4 Combined ether extract,percent by mass,MAX. 0.2 5 Subsidiary dyes,percent by mass,MAX. 1 6 Dye Intermediates,percent by mass.MAX. 0.5 7 Heavy metals as pb(mg/kg)MAX. 40 8 Arsenic,(mg/kg). MAX 3 9 lead,(mg/kg) MAX 10