Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Product description:Dark blue tinted Float Glass is produced by adding metal oxides during the manufacturing of clear float glass at the smelting stage to make the glass to be dark blue. Tinted glass absorbs and re-radiates solar energy reducing heat,providing cost efficient climate control. It also reduces sun glare and is aesthetically appealing. Advantages-low UV transmittance rate and good sunshade efficiency to protect furniture and furnishing fading.-Energy saving, reducing solar glare and heat transmission.-Can be cut, bent, tempered, heat strengthened and laminated.-High value creation by color variety of buildingâ??s exterior appearance-Ensures Privacy,it is difficult to see in, protecting the privacy of those inside. But, from the inside, it is possible to see the outside clearly ApplicationExternal use of windows, doors, balcony, curtain wall, etc.Interior glass screens, partitions, balustrades, etc.Furniture like table tops, showcases, shelves, etcMirror glass SpecificationThickness: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mmSize: from min 150x100mm to max 9000x3300mm1, Why choose Joysun?- Many years manufacture and export experience for all kinds of glass and mirror- Sell to many countries all over the world- Large stock to keep the best handover date- Super quality with competitive prices and 100% quality checking before shipment - Refund and replacement for production faulty 2, How is the whole order processed?Send us your specific inquiry-Quotation-Confirm the order-30% Pre-payment- Start the production-Good inspection-Arrange the shipment after balance payment received3, Can the samples be suppliedï¼?We can supply the samples before bulk production for your checking and testing4, What is the lead time?2-3 weeks after pre-payment received.
Product description:Dark blue tinted Float Glass is produced by adding metal oxides during the manufacturing of clear float glass at the smelting stage to make the glass to be dark blue. Tinted glass absorbs and re-radiates solar energy reducing heat,providing cost efficient climate control. It also reduces sun glare and is aesthetically appealing. Advantages-low UV transmittance rate and good sunshade efficiency to protect furniture and furnishing fading.-Energy saving, reducing solar glare and heat transmission.-Can be cut, bent, tempered, heat strengthened and laminated.-High value creation by color variety of buildingâ??s exterior appearance-Ensures Privacy,it is difficult to see in, protecting the privacy of those inside. But, from the inside, it is possible to see the outside clearly ApplicationExternal use of windows, doors, balcony, curtain wall, etc.Interior glass screens, partitions, balustrades, etc.Furniture like table tops, showcases, shelves, etcMirror glass SpecificationThickness: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mmSize: from min 150x100mm to max 9000x3300mm1, Why choose Joysun?- Many years manufacture and export experience for all kinds of glass and mirror- Sell to many countries all over the world- Large stock to keep the best handover date- Super quality with competitive prices and 100% quality checking before shipment - Refund and replacement for production faulty 2, How is the whole order processed?Send us your specific inquiry-Quotation-Confirm the order-30% Pre-payment- Start the production-Good inspection-Arrange the shipment after balance payment received3, Can the samples be suppliedï¼?We can supply the samples before bulk production for your checking and testing4, What is the lead time?2-3 weeks after pre-payment received.
Baby Diaper Nonwovens Fabrics, No Smell Non Woven Fabrics, Breathable Nonwoven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR BABY DIAPER: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Sanitary Napkin Nonwovens Fabrics, PP Spun Bonded Non Woven Fabrics, SSS Non Woven Fabrics Manufacturer. REASONS TO CHOOSE NONWOVENS FOR SANITARY NAPKIN: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
Diaper Non Woven Fabric, Pet Pads Non Wovens Fabrics, Pet Pads Spunbond Non Woven Fabric Manufacturer. REASONS TO CHOOSE NONWOVENS FOR PET PADS: . Super soft like cotton . Good uniformity . Hydrophilic or Hydrophobic . Breathable . No smell . No stimulation to skin . Eco-friendly PRODUCT SPECIFICATIONS: 1) Professional factory direct 2) Timely delivery; 3) QC team 4) No dust workshop, Automatic-packing, on-line monitor, barcode label; 5) SGS Certificate Products: SSS nonwoven fabrics for baby/adult diaper Raw material: 100% Polypropylene Technics : Spun bonded Basic Weight: 9~35g/m2 Color: white, blue, light yellow or others Width: 100--3200mm Roll diameter: within 1200mm Production Capacity: 1200tons/month Lead time: two weeks after getting deposit Payment term: 30% deposit, balance against copy of BL or L/C at sight Packaging: Rolling, inside paper core with ID 76mm, outside PE/shrink film MOQ: 5 tons 20' container: 5-6 tons 40GP container: 10-11tons 40HQ container: 11-12 tons Advantage: super soft like cotton, good uniformity, hydrophilic, breathable, no smell, no stimulation to skin, Eco-friendly Application: mainly used for baby & adult diapers, sanitary napkins, pet pads, under pads, wet wipes etc. Quick Details Technics Spun bonded Basic weight 9-35gsm Tensile strength (MD) 12-35N/5 cm Tensile strength (CD) 3.5-12N/5 cm Elongation (MD) 15-70% Elongation (CD) 30-90% strike-through time
This series of high-speed Tile Forming Machine is a new-generational type roof tile roll forming machine and glazed tile roll forming machine with high speed and high-efficient, including decoiler system, sheet guiding system, roll forming system, pressing system, cutting system, auto-stacker system, hydraulic system, controlling system, etc. The common thickness for final products is normally 0.4-0.8mm to different profiles and materials.� We also have other roll forming machines, like the ridge cap and downpipe machines for roof use. High-speed roof tile roll forming machine for sale on jinggongmachine.com, contact us right now! Technical Parameter Of High Speed Roll Forming Machine Item parameter Modle HVM-183 Material Type Colored steel sheet Thickness 0.4-0.7 Yield strength 230-300 Max.Forming speed 4-5 Roller material 45#Steel with chrome coated Roller driven type Chain transmission Controller PLC Operation Touch screen+button Hydraulic system pressure 13 Hydraulic station motor power 7.5 Main motor power 4 Total power 11.5 Total weight About 10000 Technic Flow Of High-Speed roof tile forming machine Decoilingâ??guiding and feedingâ??roll formingâ??pressingâ??cut to lengthâ??run out table Main Components of High-Speed Tile Forming Machine Uncoiler Cantilever-type fully automatic uncoiler adopts ultrasonic sensor technology and frequency inverter adjustment. The pressing-arm hydraulic driven power is optional. All electrical parts and hydraulic parts are installed inside of uncoiler frame. Roll forming Roll forming system consists of guiding device, machine base, transmission parts. and roll forming rollers, etc. The filming and pre-slitter device is optional. Punching The punching system adopts hydraulic type punching, which works stably and without scratch. The single punching or twin punching is optional. Post-shearing device Post-shearing device adopts frame type hydraulic shearing. The panel is cut stably and can avoid distortion. This design don't have any scrap in the process of cutting. Hydraulic system Hydraulic system is installed inside of machine base. The design is reasonable and compactly. Controller It adopts Mitsubishi PLC and frequency inverter adjustment to realize fully automatic operation. Operator can set parameters such as badges, length of panels quantities in the touch screen. For more information about roofing roll forming machine price, please feel free to contact us!
9060/1390/1610 LASER CO2 6040 ENGRAVING CUTTING MACHINE This serial CO2 laser engraving cutting machine is with a smaller work size and 1 laser head. They are common styles in the current market and are most widely used in practical applications. They are good at engraving and cutting nonmetal materials, such as acrylic, wooden boards, paper, bamboo, dual-color boards, and other non-metallic materials. Compact structure, easy to move. 6040/9060/1390/1610 CO2 LASER ENGRAVING CUTTING MACHINE TECHNICAL PARAMETERS Model WH-1390 Work size 1300*900mm Machine size 1820*1320*1020mm Laser head quantity 2 Pcs Laser power 60w/80w/100w/130w/150w (Optional) Work table Blade table/Honeycomb table Engraving speed 0-60000mm/min Cutting speed 0-30000mm/min Driving system Stepper motor Resetting positioning accuracy 0.01mm Laser tube cooling Water cooling Max power About 1kw Machine control DSP controlling Power supply AC 110 - 220V, 50 - 60Hz Min. shaping character Chinese 2mm*2mm, English 1mm*1mm Supported graphic BMP, PLT, DST, DXP, and AI Software supported CorelDraw, AutoCAD, Photo shop Operating temperature 0â??ï½?45â?? Operating humidity 5%ï½?95% Standard assistant parts 550W Exhaust fan*2units Water pump*2units 195w air compressor*2units Optional parts CW3000w/CW5000/CW5200 chiller Motorized up down table Autofocus Red dot pointer Rotary axis Servo motor Features of 6040/Laser 9060/1390/1610 Co2 Laser Engraving Cutting Machine 01 The appearance is humanized in design, with front and rear material access and omni-directional wheel movement, making your production and processing more flexible. 02 This non-metal cutting machine adopts high-frequency uniform power 60W/80W/100W/150W/CO2 laser, capable of continuous 24-hour uniform output and strong anti-interference ability. 03 The machine adopts Ruida 6445G control system, which is mature and stable, supports offline USB usage, and is more convenient to use; It also has a breakpoint resume function. 04 It adopts linear guide rails from Taiwan, ensuring smooth motion trajectory and high speed accuracy. 05 The optical system utilizes II-VI high-transmittance focusing lenses and high-quality reflector mirrors, ensuring a finely constant beam, large cutting depth, and high engraving precision.
Product Description Paraffin wax, also called 'paraffin', is a white, tasteless, odourless, translucent waxy solid. Paraffin wax is a type of wax that is derived from petroleum. Here are some key facts about paraffin wax: 1. Composition: Paraffin wax is primarily composed of long-chain hydrocarbons, specifically alkanes. These hydrocarbons are saturated, meaning they contain only single bonds between carbon atoms. 2. Physical Properties: Paraffin wax has a relatively low melting point, typically between 46°C to 68°C (115°F to 154°F), making it easy to melt and work with. It solidifies at room temperature.  Popular Products Our paraffin wax are kunlun brand from Petrochina (Fushun Petrochemical Company and Daqing Petrochemical Company).Mainly Products are fully refined paraffin wax, semi refined paraffin wax and crude paraffin wax with the melting point of 54/56/58/60/62/64.      (1)Fully Refined Paraffin Wax 58/60             (2)Semi Refined Paraffin Wax 58/60             (3)Fully Refined Paraffin Wax 56/58       (4)Fully Refined Paraffin Wax 60/62          (5)Fully Refined Paraffin Wax 64/66                (6)Crude Paraffin Wax 58/60   Product Parameters  Item Value Test method Grade #52 #54 #56 #58 #60 #62 #64 #66 Melting point, °C 52 54 56 58 60 62 64 66 GB/T 2539 54 56 58 60 62 64 66 68 Oil content, %(mass) 0.5 GB/T 3554 Color, Saybolt scale +27 +25 GB/T 3555 Max light stability 4 5 SH/T 0404 Penetration, (25°C),1/10mm 19 17 GB/T 4985 Kinematic viscosity, (100°C),m/s Report GB/T 265 Odor number 1 SH/T 0414 Water soluble acid/base Not detected SH/T 0407 Mechanical impurity & moisture Not detected Visual inspec
PEEK polymer plastic material is a kind of semicrystalline aromatic polvmer and its main chain of macromole is consist of arvl. ketone, and ether. PEEK polyetheretherketone properties have heat resistance, chemical stability as thermosetting plastics, and good processability as thermoplastics. At present, polyetheretherketone PEEK is one of the polymer materials with excellent properties. PEEK Material Properties As one of the professional PEEK material manufacturers in China, ZYPEEK provides mainly two types of PEEK raw materials: pure resin and PEEK compounds. According to flow from low to high, there're 3 main grades: 770, 550, and 330. According to the form and processing method, there're 6 series: Powder (P), Fine Powder (PF), Granules (G), Glass Fiber Reinforced (GL), Carbon Fiber Reinforced (CA), Friction & Wear Resistant (FC). Besides the existing 52 grades, we could also provide customized PEEK composite materials according to the customer's actual requirements. Our polyetheretherketone PEEK products are widely used in injection molding, extrusion molding, compression molding, spraying, etc. You can also find more info about PEEK material applications in our application section. PEEK Raw Material Products FAQs î?? The main characteristics of PEEK raw material? ZYPEEK mainly adopts the preparation method of nucleophilic high-temperature displacement reaction to prepare PEEK raw materials. It effectively guarantees the stability and consistency of polyetheretherketone PEEK product quality, as well as the constancy of color and purity. î?? What field is PEEK raw material mainly used in? You can find the application of PEEK material in the electronic semiconductor industry, analytical instruments, industrial machinery, automotive industry, aerospace, petrochemical, and other fields. What are the characteristics of polyetheretherketone? Mechanical properties Self-lubrication Chemical resistance (corrosion resistance) Flame retardancy Peeling resistance Fatigue resistance Radiation resistance Hydrolysis resistance. î?? What is the basic PEEK material specification? PEEK raw material is compound modified with high temperature resistant structural materials and electrical insulating materials to produce various grades of compound modified special materials. For more information about polyetheretherketone cost and buy peek , please feel free to contact us! If you need any kinds of polyetheretherketone peek, please contact us, as a professional peek suppliers, ZYPEEK is willing to offer you high quality products.
Custom Logo Cooler Bags Custom cooler bags come in a variety of sizes, shapes, materials and brands. They are perfect for a variety of events and special occasions. We offer a variety of custom logo coolers that can be used for your brand message or logo. When exploring the different options available, it's best to consider the goals of your upcoming marketing campaign. There are many benefits to customized reefer bags. Some of the advantages you can expect include: Affordability High perceived value Variety of decorating options Usability and versatility Types of Custom Logo Cooler Bags Our custom logo cooler bags come in different shapes, styles, sizes and colors to meet your marketing needs. You can give away branded insulated bags as lunch coolers for everyday use or choose one of our larger, heavy-duty coolers for camping and family outings. How to advertise and brand your business with custom logo cooler bags Today's cooler bags are a world away from the bulky box coolers of the past. Modern technology has made it possible to turn almost any type of tote or lunch bag into a cooler bag. The key is insulation technology and materials. Our logo imprinted promotional insulated cooler bags are made with multiple layers. Each bag has an outer layer and a fabric or plastic inner layer. Sandwiched between the outer and inner layers is some type of insulating material, such as PEVA (plastic/vinyl cross). Insulators such as PEVA have strong heat retention properties. The double lining further prevents temperature exchange between the inside and outside of the custom insulated cooler bags. Any type of custom logo cooler bags can be insulated in this way. SANNE offers a large assortment of imprinted insulated cooler bags that are perfect for taking to the beach, keeping lunch cool, or filling with cold beverages that will stay cold for hours. Our large insulated cooler bags are a great alternative to traditional promotional logo picnic coolers. They are much lighter in weight and are easy to transport and carry. Promotional logo cooler bags are great for storing and transporting: *Beverages, especially canned beverages *School or work lunches/meals *Grocery/food items that need to be kept cool on the way home *Medications that need to be refrigerated
Product Name: Alpha Olefin Sulfonate (AOS) 38% Chemical Formula: R-CH=CH-(CH2)n-SO3Na CAS Number: 68439-57-6 Description: Alpha Olefin Sulfonate (AOS) 38% is an anionic surfactant widely used in various cleaning and personal care products. It is derived from alpha-olefins, resulting in a product that offers excellent detergency, emulsification, and foaming properties. AOS 38% is known for its mildness on the skin and its compatibility with other surfactants, making it a popular choice in formulations that require strong performance with minimal irritation. Appearance: AOS 38% typically appears as a clear to pale yellow liquid with a characteristic mild odor. Key Features: Superior Detergency: Efficiently removes dirt, oils, and grease. Excellent Foaming: Produces rich and stable foam, enhancing cleaning performance. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Gentle on skin, making it suitable for personal care products. Biodegradable: Environmentally friendly and breaks down easily in the environment. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Industrial Detergents Vehicle Wash Solutions Hard Surface Cleaners Technical Specifications: Active Matter: 38% min Sodium Chloride: 7% Sodium Sulfate: 1.5% pH (10% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 50 Hazen Packaging: AOS 38% is available in various packaging options to suit customer needs: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
