Product Name: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% Chemical Formula: C18H30SO3 CAS Number: 27176-87-0 Description: Linear Alkyl Benzene Sulfonic Acid (LABSA) 90% is a high-quality anionic surfactant primarily used in the formulation of detergents and cleaning products. It is derived from linear alkylbenzene, ensuring excellent performance in various applications due to its strong detergency, emulsification, and foaming properties. Appearance: LABSA 90% typically appears as a dark brown, viscous liquid. It has a pungent odor and is soluble in water, forming a stable solution. Key Features: High Detergency: Efficiently removes dirt, grease, and stains from surfaces. Excellent Foaming: Generates rich and stable foam, enhancing cleaning efficiency. Good Emulsifying Properties: Helps in the dispersion of oils and fats. Versatile: Suitable for a wide range of cleaning and detergent formulations. Cost-Effective: Provides high performance at a reasonable cost. Applications: Household Cleaning Products: Laundry Detergents Dishwashing Liquids All-purpose Cleaners Industrial Cleaners: Engine Degreasers Heavy-duty Detergents Industrial Floor Cleaners Personal Care Products: Shampoos Hand Washes Technical Specifications: Active Matter: 90% min Color (Klett): 50 Free Oil: 2.0% Sulfuric Acid: 1.5% Water Content: 1.0% Packaging: LABSA 90% is available in various packaging options to suit customer requirements: 220 kg HDPE Drums Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Making tempeh is a process of fermenting soybeans using the mold Rhizopus oligosporus. Here are the general steps: 1. **Soybean Preparation**: Soak the soybeans in water overnight or at least 8 hours. After that, drain the soybeans. 2. **Boiling Soybeans**: Boil the soybeans that have been soaked in clean water until cooked. Ripe soybeans usually crumble easily when squeezed. 3. **Drying the Soybeans**: Drain the soybeans and let them cool to a temperature of around 35-40�°C. This is important so that the mold can grow well. 4. **Mold Inoculation**: Sprinkle isolated Rhizopus oligosporus mold (can be purchased as tempeh yeast) evenly throughout the aired soybeans. 5. **Fermentation**: Place the inoculated soybeans in a container or wrap using banana leaves or plastic. Let fermentation take place for 24-48 hours at a temperature of around 30-32�°C. 6. **Packing**: After the soybeans are wrapped and the fermentation process is complete, the tempeh is ready to be consumed. Usually, tempeh will feel dense and have a distinctive aroma. This process can vary slightly depending on local preferences and conditions, but in general those are the basic steps for making tempeh.
1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size:S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size: S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
Powder Free/powdered latex examination gloves, non sterile, single use,white/light yellowcolor. Ambidextrous with beaded cuff 1) Gloves Recommended Applications: Emergency services, laboratories, pharmaceutical and cosmetic industries, catering, cleaning, general industry. 2) Gloves Materials: 100% latex Rubber 3) Gloves Size: S-XL 4) Gloves Packing: 100 pieces will be packed into a dispenser box. The number contained in each dispenser box determined by physical count. 10 dispenser boxes are packed in 2 layers of 5 giving 10 dispenser boxes inside export quality shipper carton (outer). 5) Gloves Packaging specifications: For shipper carton Inner box size: 22*12*6cm carton (outer) size: 31*25*22cm 6) Gloves Storage Conditions: The gloves will maintain their properties when stored in dry conditions out of direct sunlight at between 10 to 30 degrees C. 7) Gloves Shelf Life: The gloves shall have a shelf life of 5 years from the date of manufacture when stored in compliance with the above storage conditions.
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part: servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
SZ series turret rewinder is with matured and most advanced technology in the world, and own the ability to work in-line with die cutting machine, printing machine, slitting machine and work off line as a stand-alone solution with a separate unwinder. Automatic tube threading, automatic gluing(optional no glue), automatic cutting & rewinding and automatic label sticking, which can finish your customers orders quickly, shorten the lead-time, increase your productivity, save your labor cost and raise your product competitive advantage in the market. It can accept both printed labels and blank labels rewinding. Machine Application: This type machine is our latest innovation for small label rolls automatic cutting and rewinding with high-efficiency. Machine Highlights: 1. Servo driven and with accurate automatic loop tension control 2. Can handle a wide range of roll wide: 330, 450 and 570mm 3. Glue free system can be selected 4. Both Blank label and printed label are available 5. Precision cut in gap of finished label rolls 6. Servo motor control Mechanical arm automatic feeding system 7.Petal type holder: easier for the adjustment, not be easier loosen 8.Slitting part:servo driven for semi automatic adjustment controlled by the touch screen, save labor. 9:2 second generations labeling device: reduce noise and air compressor capacity , with belt transmission. The advantage of ours machine(finished by new generations 2 second generations glue-less non-stop turret rewinder): 1:No creases 2:Zero waste 3:save glue cost 4:save electricity consumptions 5:max rewinding max at 300mm diameters 6:die cutting scrapping waste by mini 1mm 7: non stop no need material storage rack can realized no need decreasing the speed then cutting 8: servo driven for the precision cut into gap at high speed 9: servo driven for the die cutting into the dotted line 10: Asynchronous motor for the material loader PS others:1:Fold on the label 2:4-5 label waste at least Specification: Machine Model: SZ-330 SZ-450 SZ-570 Max rewinding diameter (glue type):350mm 350mm 350mm Max rewinding diameter (glue free): 300mm 300mm 300mm Max Paper feeding: 330mm 450mm 570mm Max rewinding speed: 80-150m/min 80-150m/min 80-150m/min Mini rewinding width: 30mm 30mm 30mm Power source: 380V/3P/50HZ 380V/3P/50HZ 380V/3P/50HZ Power: 13 kw 13 kw 13kw Air source: 0.8Mpa 1m3/min 0.8Mpa 1.5m3/min 0.8Mpa 1.5m3/min Machine Dimensions: 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2080x2800mm (glue type) 3700 x2080 x2800 (glue free) 2020x2200x2800mm (glue type) 3700 x2200 x2800 (glue free) Machine weight: 2500 kgs (glue type) 3500 kgs (glue free) 2500 kgs (glue type) 3500 kgs (glue free) 2800 kgs (glue type) 3800 kgs (glue free)
Product Name: Sodium Lauryl Ether Sulfate (SLES) 70% Chemical Formula: CH3(CH2)11(OCH2CH2)nOSO3Na CAS Number: 68585342 Description: Sodium Lauryl Ether Sulfate (SLES) 70% is a versatile and widely used anionic surfactant in the detergent and personal care industries. It is produced by ethoxylation of dodecyl alcohol and subsequent sulfation to create a high-performance cleaning agent with excellent foaming, emulsifying, and solubilizing properties. SLES 70% is known for its mildness and effectiveness across various applications. Appearance: SLES 70% is typically supplied as a thick, viscous, and colorless to pale yellow liquid with a characteristic odor. Key Features: Superior Foaming: Produces abundant and stable foam, enhancing cleaning efficacy. Effective Detergency: Removes dirt, oils, and grease from surfaces effectively. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Relatively gentle on skin and suitable for use in personal care products. Versatility: Widely used in shampoos, body washes, dishwashing liquids, and other cleaning formulations. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Applications: Industrial Cleaners Vehicle Wash Solutions Technical Specifications: Active Matter: 70% min Sodium Sulfate Content: 1.5% max Unsulfated Matter: 2.0% max pH (1% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 20 Hazen Packaging: SLES 70% is available in various packaging options to suit customer needs: 220 kg HDPE Drums 1100 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Product Name: Sodium Lauryl Ether Sulfate (SLES) 28% Chemical Formula: CH3(CH2)11(OCH2CH2)nOSO3Na CAS Number: 9004824 Description: Sodium Lauryl Ether Sulfate (SLES) 28% is a high-quality surfactant widely used in personal care and cleaning products. It is derived from natural fatty alcohols and exhibits excellent detergency, emulsifying, and foaming properties, making it a versatile ingredient in various formulations. Appearance: SLES 28% typically appears as a clear to slightly yellowish viscous liquid. It has a mild, pleasant odor, which makes it suitable for use in products requiring minimal fragrance interference. Key Features: High Foaming Ability: Produces rich and stable foam, even in hard water conditions. Excellent Detergency: Effectively removes dirt, oil, and impurities from surfaces. Good Emulsifying Properties: Helps in the formation of stable emulsions, enhancing product consistency. Mild to Skin: Less irritating compared to other surfactants, suitable for personal care products. Biodegradable: Environmentally friendly and safe for use in eco-conscious formulations. Applications: Personal Care Products: Shampoos Body Washes Liquid Hand Soaps Facial Cleansers Toothpastes Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Engine Degreasers Car Wash Solutions Technical Specifications: Active Matter: 28% min pH (1% solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 20 Hazen Sodium Sulfate: 1.5% Unsulfated Matter: 1.5% Packaging: SLES 28% is available in various packaging options to suit customer requirements: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) while handling to avoid direct contact with skin and eyes. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH, EINECS, and other international regulations. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Characters: Ivory powder or flake-shaped solid. It can be dispersed well in hot water and soluble in ethanol and hot oils and fats with pleasant caramel-like odor. It is an anionic emulsifier with HLB value of 8.3. Applications: It can be used for multiple purposes such as emulsification, aging resistance, gluten fortifying and fresh-keeping in many kinds of food such as bread, steam bread, noodle, instant noodle and dumpling. It can also be used as an emulsifier in milk, non-dairy creamer, margarine, fresh cream, meat products, animal and vegetable oils, etc. (1) Increase the springiness, toughness and gas-holding capability of dough, increase volume of the bread and steam bread and improve the organization and structure. (2) It can react with amylose to delay and prevent the food aging. (3) It can make it easier to remove biscuits from moulds to produce smooth appearance, distinct layers and crisp feeling in mouth. (4) It can make hot and spicy food more pliable and softer and prolong the preservation time. (5) It can produce smoother surface, lower broken ratio, higher soaking and boiling resistance for noodle, dried noodle and instant noodle, and make them chewier. (6) Enhance the quality of quick frozen food, improve their organization and structure, and prevent surface cracking and filling escaping. Usage: (1) It can be directly mixed well with flour for use. (2) Put this product into warm water at about 60â?? with proportion of 1:6 to get paste shaped substance, ten add it into flour in proportion to obtain better effect. (3) When used in non-dairy creamer or this kind of substance, it should be heated well with emulsified substance to get homogeneous emulsion before further processing. Recommended Adding Amount: 0.2~0.5 %
HO0 CHEMTEC , Established acted as a company with rich experience on professional manufacturing& exporting water treatment chemicals.as ,purifying agent flocculant; desiccant; scale inhibitor:chelating agent:disinfectant; corrosion inhibitor sludge dehydration; dir dispersion agent: oil displacement agent,algaecides:snow-melting agents; HO0 CHEMTEC's mission is to offer a service to water treatment industries, to be a company outstanding in water treatment chemicals sector , won the customers' trust and praise from all over the world.HO0 CHEMTEC's chemicals specially used in following industry line PBTCA is the most widely used in the compounding of high-efficiency scale and corrosion inhibitors. It is one of the products with the best performance and is also an excellent stabilizer for zinc salts. It is widely used in the corrosion and scale inhibition of circulating cooling water systems and oilfield water injection systems. It is particularly suitable for compounding with zinc salts and copolymers. It can be used in high temperature, high hardness chemical book, high alkali and occasions that require high concentration multiples. PBTCA can be used as a chelating agent and metal cleaning agent in the washing industry. PBTCA is generally used in combination with other water treatment agents such as zinc salts, copolymers, organic phosphine, azoles, etc.; if used alone, the dosage is 5~15mg/L.
We are operating from Gujarat India. Indian Red chilli contribute more than 25% of total red chilli production and it is widely acceptable in global market because of it's natural red colour, hot taste and its rich aroma. Our organisation has worked diligently to create a well organised supply network. In India there are different type of red chilli grown, out of them Guntur is one of the famous for red chilli trading and export. Some of verities listed below S4 Sannam S17 Teja Byadige 273 Wrinkle 341 Red Chilli Crushed Red Chilli Packing & Loading 10kg, 15kg, 20kg, 25kg & 50kg â?? PP Bag or Jute Bag 7 MT in 20ft Container 14 MT in 40ft Container General Specification Red Chilli Product Dry Red Chilli Type With & Without Stems Colour Red Moisture 11% Max. Broken 5% Length Available as per Different Grade Max.Seeds 3% Drying Process Sun Dry Shelf Life Two Years Crop Current Year Origin India Guntur, Warangal, Gondal
Product Introduction Cyhalofop-butyl 10%+ Metamifop 10% 20% EC. Product Feature LEAFEON is a mixture of metamifop herbicide and Cyhalofop-butyl , which all are Aryloxy Phenoxy Propionate(APP) selective systemic and internal absorption conductive herbicides. Its mode of action is Acetyl-Coenzyme A carboxylase (ACCase) inhibitors can inhibit the synthesis of plant fatty acids. This product is absorbed by the stems and leaves, and transmitted to the growth point through the vascular bundle to achieve the weeding effect. It is safe for rice under the recommended dosage. Advantage Metamifop and cyhalofop butyl herbicide are the same class of herbicides, while the action sites are different. this compound has a good synergistic effect. Metamifop is Highly effective against grassy weeds with severe resistance in rice fields, such as barnyard grass, Leptochloa chinensis (L.) Nees, crabgrass, oxtenoid and other annual grass weeds. Uses and Recommendations 1. Spraying the this product at the 2-3 leaf stage of Annual gramineous weed on the direct-Seeding rice. 2. Drain the field water before spraying, evenly spray the stems and leaves with water, rehydrate 1 day after the product, keep the water layer for 5-7 days. 3. When spraying, the product should be avoided to drift to nearby gramineous crop fields. 4. Application at most once a season. 5. Please strictly use under the recommended dosage, do not submerge the rice core leaves in the water layer to avoid phytotoxicity. Cautions Toxicity to aquatic organisms should be avoided. The product should be applied far away from aquaculture areas, and field water should not be directly discharged into paddy fields, soil and other environments; Should be prohibited in the flying area of Trichogramma wasps. Workers should take protective measures, wear protective clothing, wear masks, gloves and so on. Do not eat or drink during the application ofthe herbicide. Wash your hands and face immediately after the application. Destroy the empty container by perforation and flattening and dispose of it in a safe way. Never re-use the empty container for any other purpose. Please strictly follow the label instructions. Pregnant women and lactating women should not be exposed to this product. For more information about agrochemicals market and agrochemical products, please feel free to contact us!
Atmospheric Plasma Cleaning System chain conveyor Environmentally friendly molecular-level surface cleaning enhances uniformity and hydrophilicity, making it an ideal pre-treatment for bonding processes. Product advantages: 1. Significantly improve surface hydrophilicity and enhance bonding 2. Remove surface oil, fingerprints and other organic contamination horizontally, 3. Board walking speed 2~5 meters/minute 4. Double-sided processing is possible, and equipment can be customized according to production capacity 5. Processing under atmospheric pressure, no special gas is required, and installation and use are simple Product Specifications: 1 Dimensions L*W*H:1200*1150*1150 - 1500mm 2 Power supply Single-phase 220V, 50/60HZ, 12A 3 Conveying method Roller conveyor, chain conveyor, belt conveyor 4 Working environment Temperature: -10~40, relative humidity: 50%~93% (non-condensing) 5 Plasma generator 500-700W adjustable; optional 700-1200W (high power version) High power version is suitable for 50mm and 70mm spray guns @25-40KHz 6 Working gas Water-free and oil-free compressed air; optional argon, nitrogen, etc. 7 Effective processing Width 500mm, double-sided processing (optional), the number of rotating nozzles is optional 8 Rotating spray gun Processing width diameter: 50mm, optional 70, 30, 20mm 9 Support plate thickness < 3mm (special specifications of thick plates require special customization of the equipment) 10 Processing speed 2.0m/min ~ 5.0m/min 11 Cooling method Air cooling, factory exhaust > 400m3/h 12 Control system PLC+HMI
Product Name: Alpha Olefin Sulfonate (AOS) 38% Chemical Formula: R-CH=CH-(CH2)n-SO3Na CAS Number: 68439-57-6 Description: Alpha Olefin Sulfonate (AOS) 38% is an anionic surfactant widely used in various cleaning and personal care products. It is derived from alpha-olefins, resulting in a product that offers excellent detergency, emulsification, and foaming properties. AOS 38% is known for its mildness on the skin and its compatibility with other surfactants, making it a popular choice in formulations that require strong performance with minimal irritation. Appearance: AOS 38% typically appears as a clear to pale yellow liquid with a characteristic mild odor. Key Features: Superior Detergency: Efficiently removes dirt, oils, and grease. Excellent Foaming: Produces rich and stable foam, enhancing cleaning performance. Emulsifying Agent: Assists in the dispersion and stabilization of oils and other substances in water-based formulations. Mildness: Gentle on skin, making it suitable for personal care products. Biodegradable: Environmentally friendly and breaks down easily in the environment. Applications: Personal Care Products: Shampoos Body Washes Facial Cleansers Hand Soaps Household Cleaning Products: Dishwashing Liquids Laundry Detergents All-purpose Cleaners Industrial Cleaners: Industrial Detergents Vehicle Wash Solutions Hard Surface Cleaners Technical Specifications: Active Matter: 38% min Sodium Chloride: 7% Sodium Sulfate: 1.5% pH (10% aqueous solution): 7.0 - 9.5 Color (5% Am.aq.sol.): 50 Hazen Packaging: AOS 38% is available in various packaging options to suit customer needs: 200 kg HDPE Drums 1000 kg IBC Tanks Bulk Tanker Loads Storage and Handling: Store in a cool, dry place away from direct sunlight and heat sources. Ensure containers are tightly closed when not in use. Use appropriate personal protective equipment (PPE) during handling to avoid skin and eye contact. In case of contact, rinse immediately with plenty of water. Safety and Regulatory Information: Regulatory Compliance: Complies with REACH regulations and other relevant international standards. Safety Data Sheet (SDS): Available on request, providing detailed information on safety, handling, and emergency measures.
Type :UV / LED GEL Of Soak Off Uv Gel Materials : UV Curable Polyurethane Resin Soak off : easily Color chart :more than 1000 colors,according to color chart Volume : 10/15ml/bottle Feature :Your brand color gel nail polish Products G.W : 0.055kg Certificate :MSDS\GMP MOQ : 50 pcs Soak off :Yes,soak off easily Tools : nail lamp,LED lamp Application : Nail Art Beauty, Nail Salon, Nail SPA or Training Free Samples We can provide free samples with product brochure,you just need to cover the shipping cost,welcome to test the quality of our products 15ml glass bottle,15 bottles/box CTN Capacity :300pcs/carton CTN Size (L*W*H) :45*28.5*38cm CTN G.W :19.8KG 1.UV/LED Nail Gel polish/ Varnish /Laquer can be offered without brand or do your brand. 2.UV/LED Nail Gel polish/ Varnish /Laquer can be offered in barrel as 1kg, 5kgs, 10kgs,20kgs 3.UV/LED Nail Gel polish/ Varnish /Laquer can be customized according your formula & color etc. 4.Comprehensive OEM , customized color design and buyer label & packing service offered. 5.We will provide you with free samples. 6.We can adjust the color for you as your requirement. 7.Offer Raw materials in bulk can be sold without brand. 8.Customized for you Private Label and bottles. 9.Enquiry will be replied within 24 hours, you could contact us freely 10.The freight shown on the page is general freight. Please contact us to find out how much freight is actually needed.
China overhead line fittings, crafted from iron or aluminum, secure and support conductors in power lines. Various hardware types include clamps for wire installation, hanging rings for insulator strings, crimping and repair tubes for wire connections, and spacer bars for split wires. In addition, cable fittings for pole towers are utilized. These components not only fix and support wires but also assemble suspension insulators into strings, connecting and hanging them on tower cross arms. Design and manufacturing considerations prioritize strength, stiffness, and wear resistance for long-term use. Selection and configuration of hardware must align with specific line conditions to ensure the safe and stable operation of overhead lines. Installation Guide for Overhead Power Line Accessories There are 5 steps for the installation of electrical overhead line fittings: Preparation and Planning: Conduct a comprehensive site assessment considering terrain, weather, and load requirements. Assembly and Inspection: Assemble fittings according to manufacturer guidelines, ensuring all bolts and connections are securely tightened. Lifting and Attachment: Lift and position assembled fittings onto poles or towers, using appropriate lifting equipment. Alignment and Tensioning: Verify alignment and adjust if necessary. Final Checks and Documentation: Conduct thorough quality checks, addressing any issues identified during the inspection. The components of an overhead line, a crucial element in power transmission and distribution, consist of a well-coordinated system of essential elements designed to efficiently transport electrical energy from generation sources to end-users. At its core, an overhead line typically comprises conductors, supporting structures, insulators, and associated hardware. Conductors form the backbone of the overhead line, serving as the pathway for electricity to flow. These conductors are often made of aluminum or copper, chosen for their excellent conductivity and durability. Supporting structures, such as poles or towers, play a critical role in elevating the conductors above the ground and maintaining the required clearance. The design and placement of these structures are essential to ensure the stability and reliability of the overhead line. Insulators, often made of ceramic or composite materials, are strategically placed to electrically isolate the conductors from the supporting structures, preventing unintended paths for current flow. This is crucial for maintaining the integrity and safety of the system. Additionally, associated hardware such as clamps, connectors, and fittings are employed to secure and connect various components of the overhead line, ensuring a robust and reliable transmission network.