HEDP is an organ phosphoric acid corrosion inhibitor. It can chelate with FE, cu, and ZN ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high ph value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Appearance: colorless or light yellow transparent liquid Active content HEDP : 58.0-62.0 Phosphorous acid as po33-%: 2.0 max Phosphoric acid aspo43- %: 0.8 max Chloride (as cl-)%: 0.01 max Ph 1 solution: 2 max Density 20¡æg/cm3: 1.40 Fe ion ppm : 10 max Colour alpha (hazen): 40 max.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¡æ. HPMA has obvious threshold effect under high temperature (350¡æ) and high pH£¨8.3£©level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¡æ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Appearance : Clear to umber transparent liquid Solid content % : 48.0 min Bromine value mg/g : 80.0 max Average molecular weight : 450 min pH 1 solution : 2.0-3.0 Density 20¡æ g/cm3 : 1.18 min.
CAS No 23783-26-8 Molecular Formula:C2H5O6P Molecular weight:156 Properties: HPAA is chemically stable, hard to be hydrolyzed, hard to be destroyed by acid or alkali, safety in use, no toxicity, no pollution. HPAA can improve zinc solubility. Its corrosion inhibition ability is 5-8 times better than that of HEDP and EDTMP. When built with low molecular polymers, its corrosion inhibition effect is even better. Specification: Appearance:Dark umber transparent viscous liquid Solid content %:47.0-50.0 Phosphorous acid(as PO33-)%:4.0 max Density(20 centigrade degrees)g/cm3:1.30 min pH(1% solution):1.0-3.0 Usage: HPAA is mainly used as cathode corrosion inhibitor in oilfield refill water system in fields such as steel & iron, petrochemcal, power plant and medical industries. When built with zinc salt, the effect is even better. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Cyanuric acid General description: Formula: c3h3n3o3 Molecular weight: 129.1 Cas no. : 108-80-5 Appearance: White powder, granular or colored tablet form, non-toxic and odorless Specifications: Items Powder Granular Content 98.5%min 98.0%min Moisture 0.5%max 0.50%max Burnt residue 0.10%max 0.10%max Ph (1%solution) 4.0 min 4.0min Ammelide/ammeline 0.5%max Iron(fe) 20 ppm max Sulphate(so42-) 0.5%max Size 8-30mesh, 90%through Usage: For manufacture of chlorinated isocyanides. It¡¯s mainly used in synthesizing new type bleaching agent, resin, anti-oxidant, paint, coating, selective weedkiller and metal cyaniding slow corroding. And it also can be directly used as swimming pool chlorine stabilizer, nylon, plastic, polyester, fire-retardant agent and cosmetics additive. Package: In 25kg, 1000kg bag for powder. In 25kg plastic bag or 50kg pe drums for granular Or according to buyer's requirement 21mt/20fcl
Sodium dichloroisocyanurate (sdic) General description Formula : c3o3n3cl2na Molecular weight : 219.98 Un no. : 2465 Cas no. : 2839-78-9 Effective cl: 56% min: Ph value( 1% solution)5.5-6.5: Moisture: 8.0% max Water insoluble matter: 0.2%max: Granular: 8-30 mesh, 20-60 mesh(or decided by customer) Specifications Effective chloride = Appearance Moisture = Ph value 56% , 60% 62% White powder : 8.0 4.0 5.5-7.0 56% , 60% , 62% White granular : 8 -30m , 20 -40m , 20 -60m 8.0 4.0 5.5-7.0 56% , 60% , 62% White tablet : 1 , 3 , 5 , 20g, 100g 8.0 4.0 5.5-7.0 55% White tablet : 1 , 3 , 5 , 20g , 100g 12-14 % 5.5-7.0 30% , 40% ib White powder , granular, tablet Usage It is widely used for the sterilization of swimming pool and drinking water , or fighting against infectious diseases or act as water treatment in raising silkworm, livestock, poultry and fish .It is also used as detergent of tableware, bleaching agent for cotton and flax fabric and blend fabric, as germicide in hospitals, restaurants and also as deco lour, etc. Packing Tube, bucket, cardboard drum, pe-drum, carton, jumbo bag. 1kg, 2kg, 5kg, 10kg, 20kg, 25kg, 30kg, 50kg, 1000kg Or according to buyer's requirement Cautions Keep dry, out of sunlight and rain, avoid its contact with strong acids, strong bases and strong reducing agents 21mt/20fcl
Molecular formulaú¦c3cl3n3o3 Molecular weight: 232.41 Physical and chemical propertyú¦ it is one kind of highly effective disinfection, the sterilization, the bleaching agent Usage: With strong bleaching and disinfection effects, ití»s stable in chemical composition and convenient to vue. It widely cued as high effective disinfectant for civil sanitation, animal husbandry and plant protection, drybleach in agent of clothes, chimical fabrics, as shrind-proof agent for woolen, organic synthesis industry. Index first second Effective cl í²90% í²88.0% Ph (1%solution) 2.7-3.3 2.6-3.2 Water (h2o) 5-10% 1.0% Packing: in plastic drum, cardboard 25kg or 50kg, plastic knitting bag 1000kg (or decided by customer).
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree. Use characteristics 1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption. 2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role. 3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%. 4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Anionic Polyacrylamide: It is the white powder. The APAM with the molecular weight of 4,000,000-26,000,000 has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions. Use: (1) Industrial waste water treatment: For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc.. (2) Drinking water treatment: When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter. (3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory. (4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery. (5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making. Effective pH value:7-14 Package:25kg/pack
Molecular weight (í-1002) í¦500 í¦600 í¦700 í¦800 Solid content (%) í¦90 í¦90 í¦90 í¦90 Ionic degree (20%-80%) 20-45 45-55 55-60 65-80 Residual monomer (%) 0.05-0.1 0.05-0.1 0.05-0.1 0.05-0.1 Dissolution time(min) í_50 í_50 í_50 í_50 Intrinsic Viscosity (dl/g) í¦8 í¦8 í¦8 í¦8 Appearance White powder/granule. 25kg/pack
Index name First grade product Liquid Solid Relative density(200C)í¦ 1.18-1.21 Al2O3% í¦ 10.0 29.0 Alkalinity% 60-85 60-85 Water-insoluble% í_ .0.2 0.6 pH(1% aqueous solution) í_ 3.5-5.0 3.5-5.0 Sulfate radical(SO42-)% í_ 3.5 9.8. 5 kg / pack.
Specification ATMP Liquit Appearance: colorless or light yellow transparent liquid Active acid %: 48.0-52.0 Chloride (as Cl-)%: 2.0(or1.0) min pH value (1%solution): 2.0 max Fe (as Fe3+) (ppm): 20 Density (20C)g/cm3: 1.33 min Colour APHA (Hazen): 40 max ATMP Solid: Appearance: White crystal powder Active acid %: 95min Chloride (as Cl-)%: 1.0 min pH value (1% solution): 2.0 max Fe (as Fe3+) (ppm): 20 Density (20f+)g/cm3 Colour APHA (Hazen).
Properties: PESA is a multivariate scale and corrosion inhibitor with non-phosphor and non-nitrogen, PESA has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious. PESA has good biodegradation properties, PESA can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. PESA can be operated under high concentration index. PESA has good synergism with chlorine and other Water Treatment Chemicals. Specification: Appearance Colorless or amble transparent liquid Solid content % 40.0 min Density (20C)g/cm3 1.28 min pH(1% water solution) 9.0-12.0 Usage: PESA can be used in system of oilfield refill water, crude oil dehydration and boiler; PESA can be used in circulating cool water system of steel, petrochemical, power plant, medicine. PESA can be used in boiler water, circulating cool water, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index. PESA can be used in detergent fields. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place. Safety Protection: Alkaline, Avoid contact with eye and skin, once contacted, flush with water. Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Application field 1. It is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs. 2. It can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry. 3. It also can be used in the production process of paper & pulp as retention agent. Application methods 1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water. 2. The ph value of the waste water should be adjusted to 7-10 for better result. 3. When the colority and cod are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process. Package and storage 1. It is harmless, no-flammable and non-explosive, it can be stored at room temperature, it can not be placed in the sun. 2. It is packaged in plastic drums with each containing 25kg, 50kg, 250kg and 1250kg. 3. Storage temperature: 10-30 f¦.
Cas 26099-09-2 dequest: p9000 Properties: Hpma(hydrolyzed polymaleic anhydride) is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330 centigrade. Hpma(hydrolyzed polymaleic anhydride) has obvious threshold effect under high temperature (350 centigrade) and high ph(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300 centigrade with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma(hydrolyzed polymaleic anhydride) is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma(hydrolyzed polymaleic anhydride) has good corrosion inhibition effect when used together with zinc salt. Hpma(hydrolyzed polymaleic anhydride) can also used as additives for cement. Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Ph(1% solution) 2.0-3.0 Density (20 centigrade)g/cm3 1.18 min Usage: Hpma(hydrolyzed polymaleic anhydride) is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma(hydrolyzed polymaleic anhydride) has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water.
CAS 181828-06-8ú¼35608-40-6 Molecular weight: 1000-5000 Molecular Formula: C4H6NO3(C4H5NO3M2)C4H6NO4 Structural Formula: Properties: PASP is a water soluble polymer. It is a green water treatment agent, with properties of non-phosphor, non-nitrogen, non-pollution and fully biodegradation. PASP has good scale inhibition on calcium carbonate, calcium sulfate, barium sulfate, calcium phosphate, etc.. Its scale inhibition rate for calcium carbonate is 100%. Moreover, PASP has dispersion and corrosion inhibition properties to metal equipment. PASP is an alternative of phosphor-containing Water Treatment Chemicals, avoiding water system eutrophication and second pollution. Specification: items index Appearance Amber transparent liquid Solid content % 40.0 min Density (20íµ)g/cm3 1.2 min pH(1% water solution) 9.0-11.0 Usage: PASP can be used as scale and corrosion inhibitor in industrial circulating cool water system, boiler water, reverse osmosis, oilfield water and desalination plant. The effects will be even better than ordinary organophosphines when used in situation of high hardness, high alkaline, high pH value and high concentration index. When built with PBTCA, the synergism is obvious. Due to its green and non-pollution to environment, PASP can be used as accessory ingredients in daily and fine chemicals. PASP can be used in agricultural as nutrient absorption intensifier to improve the production of vegetable, melon and fruit, and flowers. When used together with pesticide, its effects will be improved. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place. Safety Protection: Alkaline, Avoid contact with eye and skin, once contacted, flush with water.
Sodium dichloroisocyanurate Synonyms: Dichloroisocyanuric acid sodium salt CAS No.: 2893-78-9 Molecular Weight: 219.95 Molecular Formula: C3Cl2N3NaO3 Application: Sodium dichloroisocyanurate is suitable particularly in smaller cooling water systems and drinking water / public water supply systems for algaecide and germicide processing. Specification: Appearance: White crystalline powder Active chlorine (%): 56min. pH (1% aqueous solution): 5.5- 7.0 Solubility (25¨ªpC, g/100g water): 25 Standard Packing:25kg net/woven bag or paper drum Safety Information: Sodium dichloroisocyanurate is harmful if inhaled and/or swallowed. It is suggested to wear suitable protective clothing, gloves,
Calcium hypochlorite na process Brand name:golden-chlor Water treatment chemical:calcium hypochlorite. Appearance:white or gray white granular& tablet Application:efficient disinfectant and bleaching agent, it can whiten cotton, hemp, fibre, and Starch, also can sterilize drinking water and swimming pool. Package: packed in 25kg, 40kg, 50kg ii class drums with pvc plastic bag inside, 1kg, 2kg, 4kg, 10kg plastic drums with 5.1 oxide agent mark 40kg or 45kg plastic drum with pvc bag inside, 1 fcl/20' container can load 18mt or 20mt
Specifications: Dosage form: white powder, granular, or flake Effective CL: 90% min pH value( 1% solution): 2.7-3.3 Moisture: 0.5% max Water insoluble matter: 0.2% max Granular: 8-30 mesh, 20-60 mesh (or decided by customer) Tablet: 5g, 10g, 20g, 50g, 100g, 200g.
FC-40: Appearance: Brown Liquid Severe (Be): 44 Ferric Chloride %: Greater than 40% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3% FC-37: Appearance: Brown Liquid Severe (Be): 40 Ferric Chloride %: Greater than 37% Fe2+ %: Less than 0.3% Free Acid % Less than 0.3%. PE drum.
CAS:1429-50-1 Molecular Formula: C6H12O12N2P4Na8C Molecular weight: 612.13 1, Properties EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor. Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It is miscible with water, innocuous and none pollution to environment, has good chemical stability and temperature tolerance. It shows excellent scale inhibition ability under temperature 200oC. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium. 2, Specification: Items Index Appearance Clear yellow to umber transparent liquid Active component (as EDTMPS)% ¡Ý 30.0 Organic phosphonic acid(asPO43- )% ¡Ý 10.0 Phosphorous acid (as PO33- )%¡Ü 5.0 Phosphoric acid (asPO43- )%¡Ü 1.0 pH (1% water solution) 9.5-10.5 Density (20oC) g/cm3¡Ý 1.25 Chloride (as Cl-)%¡Ü 3.0. 3,Application range&using method:EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.Organic phosphonic acid Package and Storage:Normally EDTMPS packed with 25kg net Plastic Drum, or packed as customer¡¯s required. Storage for ten months in room shady and dry place.
