The alumina produced by China Aluminum Corp. is used as the base material, which provides high purity, little impurity and stable quality. Production is implemented on kanban basis and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result guarantee stable performance and proven quality of the final product.
Size: 10*10*3-10, 17.5*17.5*3-15, 20*20*4-20, 24*24*4-20 Packing: in Cartons Product Advantages: Accurate product dimensions, neat surface, high purity, high wear resistance
Its density is 3.6g/cm3, just half of iron and steel, which greatly reduces the equipment load. Size: 12*3mm,12*6mm,12*9mm,12*13mm, or cusomer required size Packing: in Cartons
Application: With its high strength, high hardness, high wear resistance, large specific gravity, small size, heat and corrosion resistant and pollution free, alumina grinding column is widely used in precision processing and deep processing of various ceramics, enamels, glasses and thick and hard materials in chemical factories, as grinding media for fine crushing machines like ball mills, can-type mills and vibration mills, with significantly higher crushing and milling efficiency and wear resistance than common ball stone or natural cobblestone. The alumina produced by Shandong Aluminum is used as the base material, which provides high purity, little impurity and stable quality. Production is implemented on kanban basis and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result guarantee stable performance and proven quality of the final product.
Appears as white balls ranging 0.5-20mm in diameter Applications: A.Alumina wear-resistant ceramic microball is used for grinding or separating nonmetallic mineral product powders (e.g. zirconium silicate, kaoline, heavy calcium carbonate) and materials of the coating/painting industries, and for polishing metal members. It applies to various grinding and polishing machines. B.It increases the wear coefficient when added to rubber. C.It is heat resistant and can be used as the rolling bead under a pusher kiln. D.It has high strength and high hardness and can be used for polishing. Features of wear-resistant ceramic microball (1)Alumina based (â?¥92%), will not compromise the quality of the grinded material. (2)Large specific gravity (â?¥3.60g/cm3), significantly raises the grinding efficiency, shortens the grinding time, saves energy, lowers the cost, effectively increases usable volume of the ball mill and thereby the charging rate of the grinding material. (3)High hardness, low wear rate, greatly extends the service life of the grinding media. (4)High whiteness, will not compromise the color of the grinded material. Packing: in filmed woven bags, 25kg/bag Product Advantages: The alumina produced by China Aluminum Corp. is used as the base material, which provides high purity, little impurity and stable quality. Production is implemented on kanban basis and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result guarantee stable performance and proven quality of the final product.
Application: With its high strength, high hardness, high wear resistance, large specific gravity, small size, heat and corrosion resistant and pollution free, the product is widely used in precision processing and deep processing of various ceramics, enamels, glasses and thick and hard materials in chemical factories, as grinding media for fine crushing machines like ball mills, can-type mills and vibration mills, with significantly higher crushing and milling efficiency and wear resistance than common ball stone or natural cobblestone. Features: (1)This product is composed of quality alumina with high whiteness that does not compromise the quality of the grinded material. (2)This product is formed by rolling and isostatic pressure with high specific gravity. It significant raises the grinding efficiency, shortens the grinding time, effectively increases the usable volume of the ball mill and thereby substantially extends the service life of the ball mill. (3)This product is low in abrasion, which greatly extends the service life of the ball mill. (4)This product withstands high temperatures of more than 1,000ºC. It is resistant against acid, alkali and corrosion.
Appears in white with snap fastener Application: Used as wear-resistant inner lining of ball mills and pipes. Features (1)Contains 92% alumina, high purity, will not cause contamination to the grinded material. (2)Highly wear resistant, with wear performance 266 times that of manganese steel, long service life. (3)Produces fine paste. (4)Corrosion resistant, high density, high mechanical strength. Packing: in Cartons Product Advantagesï¼?Just tell us the diameter and length of your ball mill. We will work out the size and quantity of the lining brick you need. The alumina produced by Shandong Aluminum is used as the basic material, which provides high purity, little impurity and stable quality. we got ISO900 system certificate and the entire production process is controllable and traceable. Each batch of product is strictly tested. The process and result control guarantee stable performance and proven final product quality.
1.Quick Details 1Place of Origin:Fujian, China (Mainland) 2Type:Ceramic Parts 3Application:Industrial Ceramic 4Material:Alumina Ceramic, 92%,94%,96%,99% alumina 5Model Number:INC 6Brand Name:INNOVACERA 7Color:White/Ivory 8Density:3.8g/cm3 9Compressive strength:2500 10Flexural Strength:358Mpa 11Vickers Hardness:11-14 Gpa 12Maximum Use Temperature:1650°C 13Bulk density:3.1 14Thermal Conductivity:24.7 15Thermal Shock Resistance:200-250 TC 2.Appications Aluminum ceramics are widely used in electronics and electrical engineering, metallurgical processes, chemical technologies, medical technologies, mechanical engineering, military equipment. Aluminum ceramics are used for manufacturing insulators, capacitors, resistors, furnace tubes, sealing refractory parts, foundry shapes, wear pads, thermocouple protection tubes, cutting tools and polishing/grinding powders, ballistic armor, laboratory equipment, bio-ceramic parts for orthopedic and dental surgery, bearings. 3.We are a supplier of precision ceramics. All products can be customized according to customer requirements. my mail address isvivian@innovacera.com If you want to know more products, please feel free to contact me.
Alumina ceramic foam filters mainly used for filtration of aluminum and alloys in filter case .With the excellent corrosion resistance to molten aluminum and strict control of pore size& porosity, the filter can effectively remove micron impurity and provide stable laminar flow to realize higher-quality casting. The alumina ceramic foam filter manufactured by our company has been widely used in purifying system in the founding, low-pressure, semi-continuous, continuous casting of the liquid aluminum and aluminum alloy. Characteristics: 1, stable chemical composition; 2, excellent bend and compression resistance strength; 3, completely sintering and uniform pore size; 4, three dimensional network structure and small steady-state error; 5, high porosity and low filtration hindrance; 6, high impurities attraction power and perfect filtration effect;
Pore size(ppi):10~50 Porosity(%): 80~90 Compressive strength(mpa): ¡y0.5 Bulk density(g/cm3): >0.42g Flexural strength: ¡y0.3mpa Composition: al2o3(%):60~70 Sio2(%): 15~25 Sic(%): ----- Zro2(%): ---- Others(%):10~15 Wooden case
1. Product description Inert ceramic balls are used supporting and covering catalyst for reactors in oil refinery, chemical, fertilizer, natural gas and environment protection industries, it can improve the distribution of gas and liquid; protect the catalyst from shocking by the rushing fluids, having the advantages of high strength, high stabilities to chemical and thermal circumstances. It can resistant to acid alkali, salt and all organic solvents. 2. Technical specification Al2o320-24 % Al2o3+sio2 90 % Fe2o31 % Leachable iron < 0.01% Size (diameter)19 mm Water absorption0.5 % Acid resistance98 % Alkali resistance80 % Thermal resistance1300 Crushing strength3000 n/pcs Bulk density1350 kg/m3. 1000 kg/pallet Size: 110cm*110cm*100cm
Alumina ceramic disc 320 (dry pressing/hot pressing) Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area Hydraulically optimized ports Minimum tolerances. Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area
Alumina ceramic disc 320 (dry pressing/hot pressing) Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area Hydraulically optimized ports Minimum tolerances. Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area.
Alumina ceramic disc 320 (dry pressing/hot pressing) Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area Hydraulically optimized ports Minimum tolerances Operating convenience Noise reduction / flow rates Product geometry by optimizing design features, like: Reduced contact area.
Aluminum oxide Alumina powder for Electric vacuum tube shell ceramic Al2O3 item value Classification ALUMINA CAS No. 1344-28-1 Other Names Alumina MF Al2O3 EINECS No. 215-691-6 Grade Standard Electron Grade, Industrial Grade, Reagent Grade Purity 99.5% Appearance White powder Application electronic ceramics Color White Grade Industrail Grade Density 3.5 g/cm3 Melting point 2054 Boiling Point 2980 Molecular Weight 101.96 Shape Ionische Water Solubility Hard Packing 25 Kg Pp Bag or plastic barrel Sample Availiable
Aluminum oxide Alumina powder for Electric vacuum tube shell ceramic Al2O3 item value Classification ALUMINA CAS No. 1344-28-1 Other Names Alumina MF Al2O3 EINECS No. 215-691-6 Grade Standard Electron Grade, Industrial Grade, Reagent Grade Purity 99.5% Appearance White powder Application electronic ceramics Color White Grade Industrail Grade Density 3.5 g/cm3 Melting point 2054 Boiling Point 2980 Molecular Weight 101.96 Shape Ionische Water Solubility Hard Packing 25 Kg Pp Bag or plastic barrel Sample Availiable
Aluminum oxide, commonly known as alumina, is a versatile and hard-wearing ceramic material that consists of aluminum and oxygen atoms. It exhibits exceptional hardness and is used in a wide array of applications, including as an abrasive material in sandpapers and grinding wheels due to its ability to cut and shape various surfaces. Additionally, aluminum oxide serves as an insulating material in electronics, a catalyst in chemical processes, and as a refractory material in high-temperature environments such as furnaces and crucibles. Its combination of hardness, high melting point, and electrical insulating properties makes aluminum oxide a crucial material in industries ranging from manufacturing to electronics.
We can supply on a monthly basis around 30-50 tons per month of Ceramic CPU scrap for gold discovery and scrap motherboards and lan cards. Our prices change according to your order. For bulk order or sample order, contact us for our quote. We have in stock CPU Scrap for immediate dispatch. The available CPU scrap details are as follows - -Scrap Ceramic CPU -Scrap Ceramic CPU with Aluminum Cap -Scrap Black Plastic CPU -Scrap Plastic CPU's -Ceramic Pentium pro -CPU 486 ceramic We welcome buyers from all over the world. Contact us with your requirement. Launched Launch Date Q3'13 Processor Number E5-1620V2 For Intel Smart Cache 10 MB For Intel QPI Speed 0 GT/s Instruction Set 64-bit Instruction Set Extensions AVX Lithography 22 nm Scalability 1S Only VID Voltage Range 0.651.30V of Cores 4 of Threads 8 Processor Base Frequency 3.7 GHz Max Turbo Frequency 3.9 GHz TDP 130 W Max Memory Size (dependent on memory type) 256 GB Memory Types DDR3 800/1066/1333/1600/1866 Max of Memory Channels 4 Max Memory Bandwidth 59.7 GB/s ECC Memory Supported Yes PCI Express Revision 3.0 PCI Express Configurations x4, x8, x16 Max of PCI Express Lanes 40 We also sell the following scrap: Computer Mother Boards Computer Finger Boards Computer Memory Computer Processors Computer Power Supplies Computer Hard Disks Computer Floppy Drives Computer CD Rom Computer Cases Computer Wires Computer Keypads Computer Mouse Computer UPS or Lead batteries from UPS Cell Phone Handsets Cell Phone PCB Boards Cell Phone Batteries Lithium Cell Phone Batteries Nickel Cell Phone LCDs Cell Phone Housings Cell P If interested, please do contact with us for more details,product photos,product availability ,shipment time.
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
