Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All-in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Main matter in this product page: We Manufacture , Supply , Install highly efficient Solar Street Lights of two categories : Solar Integrated / Solar All in-one Street Lights : These are Solar All-in-one lights which means LED s , Solar Panel , Lithium (LFP) battery , Charge controller , BMS ( Battery Management System) , PIR (Motion Sensor) are inbuilt in one single unit Ranges available from 15 watt to 100 watt Solar Semi Integrated lights : These are Solar Street lights on which Solar Panels are mounted separately on top of pole with help of mounting frame and remaining components like LED s , Lithium (LFP) batteries , Charge Controller , BMS ( Battery Management System) are kept in one single unit . Ranges available from 15 watt to 60 watt Description / Features : No External power supply from DG set / EB line is required to run these lights they are completely self powered Comes with 5 years complete warranty including battery pack They come with back up of 18-20 hours a day and designed to operate in all climatic conditions with minimum back up time of 14-15 hours a day. No External cables required cable cost will be completely saved Saves Fuel cost / Energy cost these assemblies generally gets breakeven in less than 2 years Auto Dusk to Dawn Operation is programmed Auto On-Off of lights sensing ambient light Equipped with highly efficient LiFePo4 Lithium batteries and they has cycle life of 5000 cycles Highly efficient and tier 1 grade MONO PERC Solar Modules are used PIR (motion) sensor can be equipped as per requirement and they sense motion from distance of 10 meters. Completely safe to use at construction sites since no cabling and cable routing are required and they are complete DC systems . Warranty : All components of Solar Street Lights comes with 5 years complete warranty including that of battery pack Applications : Stock Yards / Storage Yards Site Offices Corporate Offices Residential projects , Layouts Gardens , Parks Shopping malls Parking Toll Plazas Highway Lighting Streets Lighting Re-walls construction sites Bridges Structural Construction sites
Non-Sterile Medical Examination Nitrile Gloves Powder free & Latex free 100% Virgin raw materials with FDA certificate & as per ASTM D6319/ CE EN 455 Quality standard: ASTM D6319, with 510K and FDA, CE/EN455, Color: Blue, white Finger Tips: textured Cuff: Beaded Pcs per Box for S/M/L/XL : 100pcs/box Origin: China, Vietnam, Thailand, Malaysia Benefits Protection from unwanted and harmful substances Beaded Cuff ensures easy donning and prevent roll down Superior Strength with better Puncture resistance Finger Tip Textured enhances wet and dry grip Thinner Guage improves tactile senstivity Custom Design enhances comfort and fit Provide an Alternate Solution for individual who are allergic to natural rubber latex Material : Synthetic Nitrile Type : Non-Sterile Powder Free, Amibidextrous, Finger Tip Textured, beaded cuff. Storage: Store in a dry and cool place, the temperature not higher than 38�° C Shelf life: 2 years Physical Properties Tensile Strength: Before Aging 14Mpa min Tensile Strength: After Aging 14Mpa min Elongation at Break (%): Before aging 500% min Elongation at Break (%): After aging 400% min Length: 230 mm in XS, S, M, L, XL Width: 70+/- 10 (XS) Width: 80+/- 10 (S) Width: 95+/- 10 (M) Width: 110+/- 10 (L) Width: 120+/- 10 (XL) Thickness Single wall ( mm): Fingers 0.050mm min Thickness Single wall ( mm): Palm 0.050mm min
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23)SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architecture; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days
Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Duplex 2205 is a nitrogen-enhanced duplex stainless steel that was developed to combat common corrosion problems encountered with the 300 series stainless steels. Duplex ? describes a family of stainless steels that are neither fully austenitic, like 304 stainless, nor purely ferritic, like 430 stainless. The structure of 2205 duplex stainless steel consists of austenite pools surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. Often referred to as the work horse grade, 2205 is the most widely used grade in the duplex family of stainless steels The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Usage of 2205 Duplex stainless steel should be limited to temperatures below 600 F. Extended elevated temperature exposure can embrittle 2205 stainless.
Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking. Usage of Duplex 2507 should be limited to applications below 600�?�° F (316�?�° C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507. Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy. The resulting savings in weight can dramatically reduce the overall cost of fabrication. The advantage of a duplex structure is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Usage of 2205 Duplex stainless steel should be limited to temperatures below 600 F. Extended elevated temperature exposure can embrittle 2205 stainless
Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness: 0.3-60mm Width: 500-2000mm or customized Length: 1000-6000 or customized Standard size: 1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application: Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.
StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 3040Cr18Ni9A182F304SUSF30414301 Hardness 14H12H34HHO Chemical Composition Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS304 008 100 200 0045 0030 80100 1820 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS304 ANN 200 205 520 40 14H 200250 225 550 35 12H 250310 470 780 6 34H 310370 665 930 3 H 370430 880 1130 Surfce Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe
Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Product Specification and Steel Grade ASTM JIS AISI EN Mill\'s Standard S30100 SUS301 301 1.4310 S30400 SUS304 304 1.4301 S30403 - 304L 1.4307 S31008 SUS310S 310S 1.4845 S31603 - 316L 1.4404 201 S32100 SUS321 321 1.4541 202 S41008 SUS410S 410S - 204Cu3 S43000 SUS430 430 1.4016 S43932 - - 1.4510 S44400 SUS444 444 1.4521 S44500 SUS430J1L - - Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL Tolerance of Width W < 100 mm 100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm �?�??�?�?�?�± 0.10 mm �?�??�?�?�?�± 0.25 mm Chemical Composition & Mechanical Property : Steel Grade Ni% Max. Cr% Max. C% Max. Si% Max. SUS301 6.0~8.0 16.0~18.0 0.15 1 SUS304 8.0~10.5 18.0~20.0 0.08 1 SUS304L 9.0~13.0 18.0~20.0 0.03 1 SUS310S 19.0~22.0 24.0~26.0 0.08 1.5 SUS316L 12.0~15.0 16.0~18.0 0.03 1 SUS321 9.0~13.0 17.0~19.0 0.08 1 SUH409L 0.6 10.5~11.75 0.03 1 SUS410S 0.6 11.5~13.5 0.08 1 US420J2 0.6 12.0~14.0 0.08 1 SUS430 0.6 16.0~18.0 0.12 0.75 Mechanical Property (For Reference) Steel Grade N/mm 2 MIN. Tensile Stress N/mm 2 MIN. Proof Stress % MIN. Elongation HRB MAX. Hardness SUS301 520 205 40 95 SUS304 520 205 40 90 SUS304L 480 175 40 90 SUS310S 520 205 40 90 SUS316L 480 175 40 90 SUS321 520 205 40 90 SUH409L 360 175 25 80 SUS410S 410 205 20 88 SUS420J2 540 225 18 99 SUS430 420 205 22 88
StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 301 sus301 X12CrNi1707Cr17Ni71431 Hardness 14H12H34HHO Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS301 015 100 200 0045 0030 6080 1618 025 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS301 ANN 250 205 520 40 14H 250310 470 780 35 12H 310370 510 930 10 34H 370430 745 1130 5 H 430490 1030 1320 3 EN 490550 1275 1570 Surface Finish Surface Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe
Factory Direct Sell 201 304 316 6 inch welded stainless steel pipe Stainless steel welded pipes/tubes AISI 430 409L 441 436 444 different kinds of stainless steel welded pipes/tubes construction manufacturer welded stainless steel exhaust pipe 409 441 439 Supply ASTM 304 410 430 440 441 Seamless Stainless Steel tube pipe With Low Price 446 410 420 409L 441 436L stainless steel welded pipe for exhaust Good Prices SS Tube 420 431 439 441 443 Stainless Steel pipe 1.4307 Top sell high quality 441 stainless steel welded pipe per meter price 1 buyer Supply China ASTM 441 Seamless Stainless Steel tube/pipe With Low Price 304 316 321 Supply ASTM 441 Seamless Stainless Steel Tube/Pipe With Low Price
430 Stainless Steel Strip Specifications Grade: 430 Standard: ASTM/EN/JIS Thickness: 0.03mm-5.0 mm Width: 8.5mm-600 mm Length: coil type or it can be produced as customer requirements Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge 430 Stainless Steel Strip Introductions 430 stainless steel strip is a general purpose stainless steel with good corrosion resistance. It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance. Due to addition of stabilizing element titanium, it has good mechanical properties of welding. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower. 430 Stainless Steel Strip Applications 430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware. 430 Stainless Steel Strip Chemical Composition The chemical components of grade 430 stainless steel strip is summarized in the following table: Grade Standard C Si Mn P S Cr Ni Mo 430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL