Characters: ivory or straw yellow powder or granular solid which is easily soluble in hot water. It is a non-ionic emulsifier with hlb value of 8-9.2. Applications: It can produce strong effects such as emulsification, dispersing and aging resistance, so it can be used as good emulsifier and dispersant. (1) it can increase the springiness, toughness and gas-holding capability of dough effectively, reduce its softening degree, increase volume of bread and steam bread, and improve their organization and structure. (2) it can react with amylose to delay and prevent the food aging. (3) it can be used in cream to make it smoother and finer. (4) it can be used in butter and concentrated butter to prevent oil separating and enhance its stability. (5) it can also be sued in sugar, syrup and spices. (6) it can be used in non-dairy creamer to make the emulsion homogeneous, stable and supple in mouth. Quality index (refer to fcciv) Acid value (mgkoh/g) 62-76 Saponification value (mgkoh/g) 380-425 Heavy metal (calculated by pb) % no more than 0.001 Arsenic (calculated by as) % no more than 0.0003 Storage & transportation: Sealed and stored in the low temperature, dry, cool and well-ventilated place, in order to prevent from moisture and caking. Strictly fordid storing and transporting with material that is explosive, combustible or deleterious. The shelf life is 12 months Aluminized bag vacuum packing with nitrogen inside. Net weight: 25kg/ctn(5*5kg). 10.8mt to one 20fcl
Diacetyl tartaric acid esters of mono-and diglyc Functional uses: It is usually used as the additive in bread, cake, butter, hydrogenated vegetable oil and vegetable oil powder, and has the functions to emulsify, increase stabilization, improve preservation, protect fresh etc. 1. Strengthen the toughness, elasticity of dough, enlarge the physical volume of the bread. Improve the structure of tissue, prolong shelf life and increase the soft feeling and pliability. 2. Complex compound can be formed by starch and DATEM to avoid starch from swelling and losing. 3. It is used as the emulsifier, dispersion agent to improve emulsification and the intermiscibility between oil and water. 4. It is used in butter to make the taste better. Solubility: Dispersive in hot water, soluble in oil and fat, or some kinds of organic dissolvent such as carbinol, acetone, propanediol etc. Technical index: Acid value (mgKOH/g) 62-76 Saponification value (mgKOH/g) 380-425 Heavy metals (calculated by Pb) % f_0.0010 Arsenic (Calculated by As) % f_0.0003 Operation method and use level: Adding DATEM to the water which temperature is above 70fpC and mixing them well or mix DATEM in the flour for use. The suggestion maximum of vegetable oil powder: 5.0·-; The suggestion maximum of hydrogenated vegetable oil, butter, cake and bread: 10g/kg. Packing: Pasteboard barrel or box and plastic bag inside. Net weight: 25kg. Storage and transportation: Seal and store in the low temperature, dry, cool and well-ventilated place, in order to prevent to be damp and become agglomeration. Strictly forbid to store and transport with materials that is explosive, combustible or deleterious. The shelf life is 18 months.
Apt8000 series is a digital pressure transmitter designed for industrial pressure measurement applications. The apt8000 offer configurations for gauge pressure, absolute pressure and vacuum including integrated solutions for industrial applications. Features Updating time of output current in 90 ms Improved performance, increased accuracy, greater stability Two years stability of 0.15% 0.075% accuracy Parameter setting by local keypad or rs485 communication port 4-20 ma output plus direct digital hart communication Automatic zero calibration by press button Explosion proof and weather proof housing Specification Process fluid:liquid, gas or vapor Application:absolute pressure, gauge pressure, vacuum Measuring range: 0 - 10 kpa ~ 0 - 30 kpa ( minimum ) 0 - 7 mpa ~ 0 - 32 mpa ( maximum ) Accuracy:+/- 0.075% of span Working temperature:-25 to +95 deg.C Max. Pressure:32 mpa Display:4 digits programmable & 0-100% bargraph Power supply:13 ~ 38 vdc Digital communication:hart protocol, rs485 Response time:90 ms Mounting:direct instrallation or bracket on 2'' pipe Dimensions:104 mm ( w ) * 158 mm ( h ) * 110 mm ( d ) Weight:1.2 kg Enclosure: Ip67 ( standard ) Intrinsically safe eex ia iic t5 ( standard ) Explosion proof ex d iib t5 Standard
Indoor full color led display screen Products details: Indoor full color smd display Product features: Adopt separate smd led plus particular chip controlling technology to ensure led stability effectively. Patent aluminum alloy mask design. Good thermolysis ability. Good integration, improved out looking of the screen. Improved background darkness to increase the contrast ratio Special aluminum board in mid-layer design for good thermolysis to get high stability The above technology has been applied for all series of full color display including: p6, p7.62, p8, p10 etc. Yjg-irealpic-p5 Pixel pitch ·ª5mm Pixel density ·ª40000 dots/m2 Led arrangement·ª1r1g1b Led standard: smd0603 Module resolution: 32*32 Module size: 160*160 mm Brightness: fª1500cd/ m2 Drive mode·ª1/8 constant current driver Average power consumption: 650 w/ m2 Max power consumption: 2000 w/ m2 Mttf: ·+1000hours View angle: 140 degree Best viewing distance: 5-38 m Protection level: ip31 Wooden
china coal0001 DWS25 Double Telescopic Suspension Hydraulic Acrow Prop Introduction of DWS25 Double Telescopic Suspension Hydraulic Acrow Prop DWS25 Double Telescopic Suspension Hydraulic Acrow Prop using mine (suspension) technical principles, pillars suspension force to achieve four-fifths of the working resistance, the column is only one fifth of the force. Thus greatly improving the pillars of stability and security, improve the supporting pillar height, carrying capacity and anti-bias load capability. Application of DWS25 Double Telescopic Suspension Hydraulic Acrow Prop DWS25 Double Telescopic Suspension Hydraulic Acrow Prop abandoned lengthened cylindrical, stigma, and pistons, no arc welds, no internal leakage, visual inspection with the naked eye, pillar when disclosed, maybe replaced at any pillars that prop safer avoid the pillar caused by the presence of leaks inside the pillar top and cumbersome virtual testing work. Parameter of DWS25 Double Telescopic Suspension Hydraulic Acrow Prop Model Maxi Height Mini Height Working Stroke Working Resistance Weight DWS25-200/82X250010501450200KN60KG DWS25-250/92X25001050145025065 DWS25-200/92X35001500200020085
Our company is a professional factory engaging in producing powder metallurgy parts, which also enjoy good reputation in home and abroad market, and we have more than ten years experiences in this line. Sinter pistons, valve seats and rod guides are key powder metal components for shock absorbers for wheeled and two wheeled vehicles. These components contribute to the stability of damping force and give good drivality for drivers. The property is as below: 1. Density of rod guide: í¦6.7g/cm3, 2. Specification 56.8*8*25 mm 3. Hardness: 60-70HB 4. Efficient steam treatment 5. High precision 6. Competitive price. Packing 1. 120pcs per carton 2. Carton size: 36.5*22.5*14.5mm 3. Gross weight: 24.5kg 4. Net weight: 24kg 5. Packing dozens of cartons per pallet 6. 6-7 pallets per container. Packing 1. 120pcs per carton 2. Carton size: 36.5*22.5*14.5mm 3. Gross weight: 24.5kg 4. Net weight: 24kg 5. Packing dozens of cartons per pallet 6. 6-7 pallets per container.
Flexographic machine Flexoline is the last generation lombardi flexo press. Flexoline's printing unit is our bigger technical success: it is a masterpiece of precision and simplicity of use. In fact printing unit's project was developed inspiring to hyper systems technical concept. A system is said to be a hyper system if its features optimize a specified technical parameter. More in detail flexoline's printing unit exhibits: Hyper-fit-system: an innovative system is used for print rolls allowing for immediate fitting of cylinders of different diameter with no need for an adapter. In fact print rolls lay on a special algorithmical-studied curve that ables to keep constant the printing pressure varying the roll diameter. (it minimizes the fitting time). Hyper-fix-system: the plate cylinder is pneumatically clamped with a conical piston that grants irreversibility of motion and reduces motions and vibrations to a minimum. (it optimizes stability). Hyper-clean-system: when the machine stops, the ink roller (anilox) is first removed, followed (after a settable time) by the print cylinder, in order to clean ink in excess (an essential operation when using non-uv inks).(it minimizes cleaning time). If you are interested please contact us.
Our mainly produces are high-precision, low-noise deep groove ball bearing, auto hub bearing, precision bearing, high-speed & precision bearing, shaft bearing and motor bearing. Our products are mainly sold to usa, japan, korea, brazil... Twenty countries around world. Auto bearings are supplied r to produce your products in china with lower costs. 51213 , 65 , 100 , 27 , 1 , 75 , 189 , 0.78 51313 , 65 , 115 , 36 , 1.1 , 128 , 287 , 1.51 51413 , 65 , 140 , 56 , 2 , 232 , 495 , 3.96 51114 , 70 , 95 , 18 , 1 , 43 , 127 , 0.36 51214 , 70 , 105 , 27 , 1 , 76 , 199 , 0.79 51314 , 70 , 125 , 40 , 1.1 , 148 , 340 , 2.01 51414 , 70 , 150 , 60 , 2 , 250 , 555 , 4.86 51115 , 75 , 100 , 19 , 1 , 44.5 , 136 , 0.4 51215 , 75 , 110 , 27 , 1 , 77.5 , 109 , 0.87 51315 , 75 , 135 , 44 , 1.5 , 171 , 295 , 2.61 51415 , 75 , 160 , 65 , 2 , 269 , 615 , 5.97 51116 , 80 , 105 , 19 , 1 , 44.5 , 141 , 0.42 51216 , 80 , 115 , 28 , 1 , 78.5 , 218 , 0.92 51316 , 80 , 140 , 44 , 1.5 , 176 , 425 , 2.72 51416 , 80 , 170 , 68 , 2.1 , 270 , 620 , 7.77 51117 , 85 , 110 , 19 , 1 , 46 , 150 , 0.45 51217 , 85 , 125 , 31 , 1 , 95.5 , 264 , 1.25 51118 , 90 , 120 , 22 , 1 , 59.5 , 190 , 0.69 51218 , 90 , 135 , 35 , 1.1 , 117 , 325 , 1.7 51120 , 100 , 135 , 25 , 1 , 85 , 268 , 1 51220 , 100 , 150 , 38 , 1.1 , 147 , 410 , 2.3 51122 , 110 , 145 , 25 , 1 , 87 , 288 , 1.08 51124 , 120 , 155 , 25 , 1 , 89 , 310 , 1.12 Non-standard 51105k1 , 27 , 43 , 10 , 0.6 , 9.2 , 20.7 , 0.04 51105k2 , 25 , 43 , 10 , 0.6 , 9.2 , 20.7 , 0.041 688808 , 40 , 67 , 14.25 , 0.6 , 15.8 , 49.6 , 0.25 * please visit www.Baimu-sh.Com for more information of (inch) deep groove bearings, ball bearings, roller bearings, precision bearings, automobile bearings, special bearings, precision steel tube. Oem(chinese no.5 biggest bearing company)
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
The ABB communication adapter RUSB-02 NPBA-12 NCAN-02 NDNA-02 NMBA-01 ABB800 series inverter accessories The main 1:RMIO-01C interface board 2:RDCU-02C RDCU-12C main control panel control panel 3:FS300R12KE3/AGDR-61C driver module 4:FS450R12KE3/AGDR-61C driver module The 5:RINT5514C control panel 6:RINT6611C 7:AINT-02C I/O board 8:APOW-01C power supply board 9:AINP-01C thyristor trigger board 10:CDP 312R panel 11: CM100DY-24A IGBT module The 12:CM150DY-24A IGBT module The 13:BSM300GB120DN2 IGBT module 14:SKKH72/16E silicon controlled module 15; TD162N16KOF silicon controlled module 16:SKKH92/16 Controllable silicon diode, IGBT, ABB ABB adapter RUSB-02 SDCS-IOB-3 SDCS-POW-4 ABB inverter accessories: ABB inverter board +ABB rectifier plate +ABB resistive plate +ABB trigger board ABB Inverter Accessories ABB DCS-500B DC transmission main spare parts ABB rectifier trigger board 1. Fuse: 170M6151 170L7299 170M7031 170M7510 170M7034 170M7035 170M7513 170M7026 170M7036 170M7520 170M7028 170M6145 170M6168 170M6163 170M6148 170M7976 170M7978 170M7156 170M7057 170M6035 170M6143 170M6144 170M6162 170M6166 170M6149 170M6169 170M6501... 2. Silicon Controlled Rectifier: SKKT162/16E SKKT250/16E TT425N16KOF TT570N16KOF TT459N24TOF T918-1770-18 T918-2000-18 TV918-1500-28 TV989-2700-28NK0 TP24N54P287 T1059N28KOF T553-800-4200 T553-630-38-71 T533-800-42-71-T2 5STP16F2800 5STP1818F0003 5STP18L3600 5STP28L3600 5STP24L2800 5STP33L2800 5STP27H1800 5STP24H2800 5STP18H3600 5STP27L1800 5STP3322L0001 5STP24L2200... 3. Control Panel: SDCS-PIN-51 SDCS-PIN-48 SDCS-PIN-205B SDCS-FEX-2A SDCS-CON-2A SDCS-POW-1 SDCS-POW-4 SDCS-PIN-4 SDCS-CON-2 SDCS-CON-2B SDCS-CON-2A SDCS-PIN-41A SDCS-PIN-46 SDCS-FEX-425 SDCS-FEX-4
Cooling capacity European standard Ambient temperature 30 Tm16 tm21 0 5300w 5700w -20 2600w 2800w American standard Ambient temperature 38 Tm16 tm21 2 5100w 5400w -18 2550w 2700w Air flow : 2600 m3/h Distance of air blowing : 7m Volume of cargo : 25m3 Temperature control range: -30 to +30 Compressor :valeo tm16 163 cc sanden 7h15 155cc Valeo tm21 215cc sanden se10b20 207cc Voltage : dc 12v 41a , dc 24v 27a Refrigerant : r404a 2.3kg Defrost: automatic defrosting (hot gas defrost) and manual compulsory defrost Controller: super refeer controller , can bus communication , controll dual temperature area Harness: heat- resistance 105 , anti flaming harness, waterproof connector Condenser coil: multicenter parallel flow , 500 hours salt spray test Evaporator coil: internal thread copper tube, hydrophilic film aluminium fin, 500hours salt spray test Condenser fan: axial , long life 12000 hours, adjust rotate speed according the heating load and ambient temperature Evaporator fan: centrifugal, long life 12000 hours Tube: copper tube, stainless steel flexible hose Bracket: steel with white painting and aluminium alloy, 500 hours salt spray test Cover : fiber glass, aluminium alloy Protection: high pressure and low pressure protection Intelligent control: super refeer control system, set the parameter by customer requirement dual temperature control , temperature arising alarm. High reliability: copper tube and stainless steel flexible hose with o-ring seal make sure there is no any refrigerant leakage happened. Jet-lube lubrication systems improve the efficiency and reliability of compressor. Long life: long life fans 12000 hours, irc condenser fans speed control technology increase The service life of fans. Ipr compressor load adjustment increase the service life of compressor. Evaportor: 1400 x 580 x150, 28 kg, carton or wooden package. Condenser: 1080 x 425 x 380, 40 kg, carton or wooden package.
ñ raw materiall:high quality low carbon steel wire, stainless steel wire ñ weave method: galvanization after weavning and galvanization before weaving.It includes hot-dipped galvanization, electro galvanization, pvc-coated, pvc-dipped, special welded wire mesh ñ capability:high antisepsis and oxidation- resistant. ñ uses:widely used as fencing, decoration and machinery protecting in industry, agriculture, construction, traffic and transportation, mining, court, lawn and cultivation, etc. Specification (english system) 3'100' 4'100' Roll dia. (cm) quantity/20» fcl (roll) weight (kg) roll dia. (cm) quantity/20» fcl (roll) weight (kg) 141" 40 240 57 40 180 75 141"2' 39 245 43 39 190 57 151" 37 275 42 37 210 56 151"2" 36 285 32 36 220 42 161" 33 335 35 33 255 47 161"2" 32 360 27 32 260 36 163/4" 35 300 47 35 225 63 171" 32 360 28 32 260 37 171/2'1" 34 330 42 34 250 56 173/4" 33 335 37 33 255 49 181" 28 475 19 28 355 25 181/2" 30 415 39 30 310 52 181/2'1" 30 415 29 30 310 38 183/4" 29 440 26 29 330 34 191" 25 565 14 25 425 18 191/2" 27 490 28 27 370 37 191/2"1" 26 525 21 26 395 28 193/4" 26 545 19 26 410 25 201" 22 740 10 22 570 13 201/2" 25 580 20 25 440 26 203/4" 24 630 13 24 480 17 211/2" 23 700 16 23 520 21 221/2" 21 800 13 21 600 16 231/4" 21 800 21 26 600 28 As customer's request.
Engine Model 4TNV94L(Yanmar ) Type 4-cycle water-cool direct injection Number of cylinder 4 Bore í-stroke (mm) 94í-110 Piston displacement (L) 3.054 Rating power (KW) 37.9 Rating rotating speed (rpm) 2200 Alternator (A) 40 Battery (V, Ah) 12,105 UNDERCARRIAGE UNDERCARRIAGE Number of carrier rollers 1 each side Number of track roller 5 each side Number of shoes 38 each side HYDRAULICS HYDRAULICS Hydraulic pump (UCHIDA) Hydraulic pump (UCHIDA) Type Variable displacement piston type Max. flow (L/min) 55í-2,35.6í-1 Setting pressure (MPa)(kg/m2) 20.6/(210) Valve (Kawasaki) Valve (Kawasaki) Type BCV-65/10 Control Full hydraulic joystick Travel motor (KYB) SJ-T55(BRAKE VALVE) Swing motor (Kawasaki) SJ-T55(SAFE VALVE) Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Hydraulic cylinderú¿KYBú¬ú¿Number of cylinders bore (mm)í-rod diamenterú¬í-Stroke Boom (mm) 115í-65í-840 Arm (mm) 100í-60í-865 Bucket (mm) 90í-55í-710 Blade (mm) 120í-70í-130 ATTACHMENT ATTACHMENT ATTACHMENT Bucket (m3) 0.28 standard type Bucket (m3) 0.22 small bucket (choose and buy) Hydraulic hammer SHB300 (choose and buy) WORKING RANGE WORKING RANGE WORKING RANGE Operation weight (kg) 6000 Max. digging height (mm) 7150 Max. dumping height (mm) 5015 Max. digging depth (mm) 4100 Max. vertical wall digging depth (mm) 3505 Max. digging reach (mm) 6328 Max. digging reach at ground level (mm ) 6220 Max. height at Min. swing radius (mm) 5460 Bucket digging force at power Max.(KN) 54.8 Swing speed (rpm) 9 Travel speed (km/h) L:2.3/H:4.3 Average ground press (KPa) 27.8 DIMENSION DIMENSION DIMENSION Overall length (mm) 6080 Overall height (to top of boom)(mm) 2500 Width of crawler (mm) 2225 Overall height (to top of cab) (mm) 2590 Ground clearance counter weight (mm) 750 Min. ground clearance (mm) 350 Tail swing radius (mm) 1750 Length of track on ground (mm) 2130 Track length (mm) 2765 Track gauge (mm) 1700 Width of crawler (mm) 2150 Width of track shoe (mm) 450 Min. swing radius (mm) 1740 Width of blade (mm) 2260
1.General introduction of our polyester fabric SHANGHAI SHANGSHAI BOLTING CLOTH MANUFACTURING CO., LTD is a professional manufacturer of all kinds of Screen Printing Mesh, Filter Mesh and Flour Mesh, established in 1997. Our company has 3 factories, the largest one is located in ANPING, HEBEI, is a recommended enterprise of the HEBEI Government. The factory in Hebei covers 119 ACRES (79,373 square meters), the two other factories are located in Shanghai. Mainly Products: Polyester Mesh, Terylene Mesh, Nylon Mesh, Polyamide Mesh, Flour Mesh, Stainless Steel Mesh, Iron Wire Mesh, Filter Mesh, etc. screen printing and filteration related products. 2.Application: 1.Equipments: 300 SWISS SULZER RUTI weaving machines, 5 Benninger high speed warping machines, 2 water washing heat setting machines. The width of weaving machines: 280cm, 330cm, 360cm, 390cm. 2.Exported Countries: America, Germany, Japan, Britain, Italy, Russia, Brazil, Turkey, Argentina, Pakistan, Thailand,etc all over the world. 3.Usage:It is widely used in bolting, filter, textile printed and dyeing, printing plate, electronic printing, ceramics, glass printing,the industries of petroleum, chemical, metallurgy, cement, environmental dedusting and mine. The fabric has been brushed, so it is more flexible and thicker,the dedusting efficiency can reach 99.99%. 3. Features & Advantages 1) Imported weaving and warping machines from Switerland or Italy make sure the high quality products and the production. 2) We produce variouse of polyesters mesh, nylon mesh and some other stainless steel mesh for printing and filtering. Our products are widely applied in high-density printed circuit boards, CDs, keyboard, ceramics, printing of T-shirt textiles, printing on glasses, and adadvertisement signpost making etc.. They also serve as filter in aerospace, petrifaction and other high technology regime 4.Technical specifications Model Specification (/cm) Mesh count (mesh/inch) Thread Diameter (um) Mesh opening(um) Open Area(%) Thickness(um) SS-PET7/1080 7 18 350 1080 57 640 SS-PET8/950 8 20 300 950 58 550 SS-PET10/700 10 25 250 700 49 620 SS-PET12/583 12 30 250 583 49 450 SS-PET16/425 16 40 200 425 46 400 SS-PET20/320 20 50 180 320 41 350 SS-PET24/297 24 60 120 297 51 240 SS-PET29/213 29 76 120 213 41 240 SS-PET32/213 32 80 100 213 46 200 SS-PET34/194 34 86 100 194 44 221 SS-PET36/178 36 90 100 178 41 216 SS-PET40/170 40 100 80 170 46 150 SS-PET43/153 43 110 80 153 43 130 SS-PET47/142 47 120 71 142 44 135 SS-PET53/125 53 135 64 125 44 120 SS-PET59/105 59 150 64 105 39 120 SS-PET62/100 62 155 64 100 37 115 SS-PET64/92 64 163 64 92 35 120 SS-PET68/83 68 173 64 83 32 130 SS-PET72/84 72 183 55 84 37 100 SS-PET77/75 77 195 55 75 33 105 SS-PET90/66 90 230 48 66 35 85 SS-PET100/61 100 250 40 61 37 70 SS-PET110/52 110 280 40 52 33 85 SS-PET120/42 120 300 40 42 26 68 SS-PET140/37 140 350 34 37 24 58 SS-PET150/34 150 380 31 34 26 46 SS-PET165/420 165 420 31 25 17 46 Carton(Customized Received)
Model : C650D-EXP blasthole drill Specifications: Rated capacity : Nominal hole size 7-7/8(200 mm ) by Rotary method, Upto a depth of 148 (45.12 m) using 30 long 6.25 OD drill pipes. Standard mounting : Tengl, India make Under Carriage model T23/D4 , 24 Triple grouser track 10 6 long with 9 bottom rollers and 2 carrier rollers each side. Independent hydraulic motor with Planetary gearbox drive for each track. Propel speed is 3.0 KMPH on plains and 1.5 KMPH on grades. Gradeability up to 25% grades with Mast down. Pulldown and hoist :Pulldown is achieved through twin hydraulic cylinders and roller chain arrangement. 33 head travel for handling 30 long drill pipe. Pulldown capacity: 35,000 LBS. Hoisting capacity: 20,000 LBS. Standard feed rate: 14 FPM Standard hoist rate: 25 FPM Fast feed rate: 70 FPM Fast hoist rate : 124 FPM MAST : Electrically welded square and rectangular steel mast of robust construction to withstand adverse drilling conditions. Mast is raised and lowered by two hydraulic cylinders with safety check valves. Working height of mast 38 for 30 long drill pipe. ROTARY HEAD : Axial piston hydraulic motor driven top head drive through spur gear reduction with a constant torque of 48,000 Inch-pounds at 0-150 RPM infinitely variable speed. AIR COMPRESSOR: Screw compressor with a capacity of 900 CFM at 100 PSI. Air oil receiver, Oil cooler, Oil filters and safety valves are provided as standard. PRIME MOVER: Cummins India make engine NTA 855C running @ 1800 RPM drives compressor @ flywheel end and hyd. pumps @ front PTO. Fuel tank capacity : 750 lit. DRILL PIPE HANDLING: Hydraulically operated Four pod loader suitable for handling 6.25 OD x 30 long drill Hydraulic power breakout wrench and stem wrench are provided as standard. HYDRAULIC SYSTEM : Open loop hydraulic system for propel, rotation, feed, Fan, auxiliary and pilot circuits. Axial piston ,variable volume pump: 48 US GPM at 4700 PSI for tram circuit and at 4200 PSI for rotation circuit. Axial piston pump : 12 US GPM at 2500 PSI for feed circuit. Gear pump for ROC fan : 22 US GPM at 3000 PSI for ROC fan circuit and 15 US GPM at 2000 PSI for auxiliary circuit. Hydraulic oil reservoir with suction strainers and 10 micron return line filters. Relief valves in all circuits. LEVELLING JACKS : Three hydraulic jacks - one front 140 MM bore, 48 stroke; two rear 125 MM bore, 36 stroke equipped with heavyduty telescopic guide tubes and lock check valves for safety. OPTIONAL EQUIPMENT: Centralised Lubrication system Shock sub for rotary head Rotary Deck Bushing Hyd powered winch Electronic depth counter Automatic Power breakout system Fire detection and suppression system Fast fuelling system Retractable dust curtain Water injection system with water tank.
6.50-16,6 ,F2 6.50-16,8 ,R1 6.50-16,8 ,R1 600/50-22.5,16,Trc-03 600/55-22.5,16,Trc-03 6-14,4 ,G-1 650/50-22.5,16,Trc-03 7.50-16,8 ,F2 7.50-16,8 ,F2 7.50-16,8 ,R1 7.50-18,8 ,F2 7.50-18,8 ,F2 7.50-20,8 ,F2 7.50-20,8 ,F2 7.50-20,8 ,R1 7.5l15,8 ,F2 7.5l-15,8 ,F2 700/40-22.5,16,Trc-03 700/50-22.5,16,Trc-03 710/40-22.5,16,Trc-03 7-14,4 ,G-1 7-16,6 ,G-1 8.25-16,8 ,Zr07 8.25-16,8 ,Zr07 8.3-20,8 ,R1 8.3-24,8 ,R1 8-16,4 ,G-1 9.5-20,8 ,R1 9.5-24,8 ,R1 9.5l-15,8 ,F2 9.5l-15,8 ,F2 9.5l-15,8 ,I-1 9.5l-15,8 ,I-1 9.5l-15,12 ,I-1 9.5l-15,12 ,I-1 At18*9-8,4 ,Tr At27*7.5-12,6 ,Tr At30*10-12,6 ,Tr At30*10-14,6 ,Tr At30*8-14,6 ,Tr Atv 30*8-12,6 ,Tr Atv27*7.5-14,6 ,Tr10-16.5 8 Skidsteer 10-16.5 10 Skidsteer 10-16.5 12 Skidsteer (No Direction) 10-16.5(L) 10 Skidsteer 11.00-16 8 F2 11.00-16 8 F2 11.00-16 8 F2M 11.2-24 8 R1 11.2-24 6 R1,Irrigation 11.2-24 6 R1,Irrigation 11.2-24 6 R1,Irrigation 11.2-24 Assembled with Steel Wheel 6 R1,Irrigation 11.2-28 8 R1 11.2-38 6 R1 11.2-38 8 R1,Irrigation 11.2-38 6 R1,Irrigation 11.2-38 6 R1,Irrigation 11.2-38 6 R1,Irrigation 11.2-38 Assembled with Steel Wheel 6 R1,Irrigation 11.2-38 Assembled with Steel Wheel 8 R1,Irrigation 11.5/80-15.3 10 IMP-01 11.5/80-15.3 12 IMP-01 11.5/80-15.3 14 IMP-01 11.5/80-15.3 16 IMP-01 11.5/80-15.3 18 IMP-01 11.5/80-15.3 10 ZR03 11.5/80-15.3 14 ZR03 11.5/80-15.3 10 ZR100 11.5/80-15.3 14 ZR100 11L-15 8 F2 11L-15 8 F2 11L-15 12 F2 11L-15 12 F2 11L-15 8 I-1 11L-15 8 I-1 11L-15 12 I-1 11L-15 12 I-1 11L-15 10 I-1 (for USA with DOT) 11L-15 12 I-1 (for USA with DOT) 11L-15 12 I-1 (for USA with DOT) 11L-15 14 I-1 (for USA with DOT) 11L-16 12 F3 12.4-24 8 R1 12.4-28 8 R1 12.5/80-15.3 12 IMP-01 12.5/80-15.3 14 IMP-01 12.5/80-15.3 16 IMP-01 12.5/80-15.3 18 IMP-01 12.5/80-18 14 I3/R4/TRC05 12.5/80-18 14 IMP-03 12.5L-15 8 DOT 12.5L-15 12 DOT 12.5L-15 14 DOT 12.5L-15 8 I-1 12.5L-15 10 I-1 12.5L-15 10 I-1 12.5L-15 12 I-1 12.5L-15 12 I-1 12.5L-15 14 I-1 12.5L-15 14 I-1 12-16.5 10 Skidsteer 12-16.5 12 Skidsteer 12-16.5 14 Skidsteer (No Direction) 12-16.5(L) 12 Skidsteer 13.0/65-18 16 IMP-01,04 13.0/65-18 16 IMP-01,04 13.00-24 12 G-2/L-2 13.00-24 16 G-2/L-2 13.6-24 8 R1 13.6-28 8 R1 13.6-38 10 R1 14.00-24 28 E3 14.00-24 12 G-2/L-2 14.00-24 16 G-2/L-2 14.9-24 8 R1 14.9-24 6 R1,Irrigation 14.9-24 6 R1,Irrigation 14.9-24 6 R1,Irrigation 14.9-24 10 R2 14.9-24 Assembled with Steel Wheel 6 R1,Irrigation 14.9-24 Assembled with Steel Wheel 6 R1,Irrigation 14.9-28 8 R1 14.9-28 10 R2 14-17.5 14 Skidsteer 14L-16.1 10 F2M 14L-16.1 10 I-1 15.0/55-17 14 IMP05 15.0/55-17 16 IMP05 15.0/55-17 18 IMP05 15.0/70-18 16 IMP05 15.5-38 10 R1 15-19.5 14 Skidsteer 16.00-24 28 E3 16.00-25 32 E3 16.5L-16.1 10 I-1 16.9-28 8 R1 16.9-30 8 R1 16.9-34 10 R1 16.9-38 10 R1 17.5-25 16 E-3/L-3 18.0-25 36 E-3 18.4-30 10 R1 18.4-30 10 R2 18.4-34 10 R1 18.4-34 10 R2 18.4-38 10 R1 18.4-38 10 R2 19.0/45-17 14 IMP-05 19.5L-16.1 10 I-1 19.5L-24(L) 12 R4 20.5-25 20 E-3/L-3 20.5-25 16 E-3/L-3 20.8-38 12 R1 21L-16.1 12 I-1 23.1-26 12 R1 23.1-26 12 R3 23.1-26 12 R3 23.5-25 16 E-3/L-3 23.5-25 20 E-3/L-3 250/80-18 8 ZR07 26.5-25 28 E-3/L-3 280/70-16 8 ZR07 280/70-18 8 ZR07 31*15.5-15 10 TR 4.00-12 4 F2 4.00-12 4 F2 4.00-19 4 F2 4.00-19 4 F2 4.0-10 4 TR01 400/60-15.5 14 IMP-01 400/60-15.5 16 IMP-01 400/60-15.5 14 IMP-04 400/60-15.5 16 IMP-04 400/60-15.5 14 TRC02 400/60-15.5 16 TRC02 5.00-12 6 ZR03 5.00-15 6 F2 5.00-15 6 F2 5.00-15 4 TR02 5.0-10 4 TR01 5.50-16 6 F2 5.50-16 6 F2 500/50-17 14 IMP-05 500/50-17 18 IMP-05 500/50-17 14 TRC02 500/50-17 18 TRC02 500/60-22.5 16 TRC-03 500/60-22.5 18 TRC-03 550/45-22.5 16 TRC03 550/60-22.5 16 TRC-03 6.00-16 6 F2 6.00-16 6 F2 6.00-16 8 R1 6.00--16 8 R1 6.5/80-12 6 TR02 6.5/80-15 6 TR02 6.50-16 6 F2 6.50-16 6 F2 6.50-16 8 R1 6.50-16 8 R1 600/50-22.5 16 TRC-03 600/55-22.5 16 TRC-03 6-14 4 G-1 650/50-22.5 16 TRC-03 7.50-16 8 F2 7.50-16 8 F2 7.50-16 8 R1 7.50-18 8 F2 7.50-18 8 F2 7.50-20 8 F2 7.50-20 8 F2 7.50-20 8 R1 7.5L15 8 F2 7.5L-15 8 F2 700/40-22.5 16 TRC-03 700/50-22.5 16 TRC-03 710/40-22.5 16 TRC-03 7-14 4 G-1 7-16 6 G-1 8.25-16 8 ZR07 8.25-16 8 ZR07 8.3-20 8 R1 8.3-24 8 R1 8-16 4 G-1 9.5-20 8 R1 9.5-24 8 R1 9.5L-15 8 F2 9.5L-15 8 F2 9.5L-15 8 I-1 9.5L-15 8 I-1 9.5L-15 12 I-1 9.5L-15 12 I-1 AT18*9-8 4 TR AT27*7.5-12 6 TR AT30*10-12 6 TR AT30*10-14 6 TR AT30*8-14 6 TR ATV 30*8-12 6 TR ATV27*7.5-14 6 TR Standard Packing
Our company is a professional manufacturer and exporter of Chemicals raw materials, specialized in Carbon Black N220/330/550/600. Here with please find our specification as follow: Carbon Black N220 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 114-128 Absorption Value of DBP(10-5M3/Kg): 109-119 Absprption Value of compressing sample DPB (10-5M3/Kg): 95-105 Adsorptive Specific Surface Area of CATB (103M2/Kg): 106-116 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 114-124 Tinting Strength: 110-120% Heating Loss: 2.5% max Ash: 0.5% max Tensile Strength: -0.5 MPa min 300% Extending stress: -2.5~ -0.5MPa Carbon Black N330 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 77-88 Absorption Value of DBP(10-5M3/Kg): 97-107 Absprption Value of compressing sample DPB (10-5M3/Kg): 83-93 Adsorptive Specific Surface Area of CATB (103M2/Kg): 77-87 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 78-88 Tinting Strength: 98-108% Heating Loss: 2.5% max Ash: 0.5% max Tensile Strength: -0.5 MPa min 300% Extending stress: -2.0~0 MPa Carbon Black N550 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 39-47 Absorption Value of DBP(10-5M3/Kg): 116-226 Absprption Value of compressing sample DPB (10-5M3/Kg): 83-93 Adsorptive Specific Surface Area of CATB (103M2/Kg): 38-46 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 38-46 Heating Loss: 1.5% max Ash: 0.5% max Tensile Strength: -3.5 MPa min 300% Extending stress: -2.0~0 MPa Carbon Black N660 Appearance: Black powder or granular Specification: Loding Absorption Number (g/Kg): 32-40 Absorption Value of DBP(10-5M3/Kg): 85-95 Absprption Value of compressing sample DPB (10-5M3/Kg): 71-79 Adsorptive Specific Surface Area of CATB (103M2/Kg): 32-40 Adsorptive Specific Surface Area of Nitrogen (103M2/Kg): 30-40 Heating Loss: 1.5% max Ash: 0.5% max Tensile Strength: -3.0MPa MIN 300% Extending stress: -3.5~1.5 MPa
