Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Aluminum Scrap Aluminum Wire scrap Aluminum Scrap UBC Aluminum Wheel scrap Specifications: 1.Aluminu scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping 4.Fire deals Specifications 1.Aluminum scrap 2.Reasonable price and high purity 3.Timely delivery and promptly shipping 4.Fire deals Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum content 75%, 95%,99.7% Aluminum content 75%, 95% 99.7% or can satisfy the demands of customer Application: Aluminum alloy production , Steelmaking and requirements of the coating is not high Fireworks production 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on Contact Us With Your Email For More Details
Hot selling high quality 99.9% aluminium Scrap Aluminium Wire Scrap Item Quality standard Si 0.2-0.6% Fe 0.35% Cu 0.1% Mn 0.1% Mg 0.45-0.9% Cr 0.1% Zn 0.1% Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
Hot selling high quality 99.9% aluminium Scrap Aluminium Wire Scrap Item Quality standard Si 0.2-0.6% Fe 0.35% Cu 0.1% Mn 0.1% Mg 0.45-0.9% Cr 0.1% Zn 0.1% Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.
hastalloys
Incoloy alloy 825 is a nickel-iron-chromium alloy with molybdenum, copper, and titanium added to enhance its corrosion resistance in highly oxidizing and reducing environments. It has excellent resistance to both reducing and oxidizing acids, stress-corrosion cracking, and pitting and crevice corrosion. It is also highly resistant to corrosion caused by chloride ions and sulfide stress cracking. The alloy has good mechanical properties and can be easily fabricated and welded. Incoloy alloy 825 is often used in chemical processing, pollution control equipment, oil and gas recovery, acid production, and nuclear fuel reprocessing industries. It is available in various forms such as pipes, tubes, plates, sheets, bars, wire, and forgings. The alloy can be further customized based on customer requirements for specific applications. Trade names: UNS N08825 W.Nr. 2.4858 Standards: United States: ASTM B423, ASTM B424, ASTM B425, ASTM B564, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829, ASME SB423, ASME SB424, ASME SB425, ASME SB564, ASME SB704, ASME SB705, ASME SB751, ASME SB775, ASME SB829 Europe: EN 10028-7, EN 10088-2, EN 10216-5, EN 10217-7, EN 10272, EN 10296-2, EN 10297-2, EN 10298-2, EN 10222-2, EN 10263-4, EN 10272, EN 10302, EN 10312, EN 10357, EN 1092-1, EN 1092-2, EN 1092-3, EN 1092-4, EN 1092-5, EN 1759-1, EN 1759-2, EN 1759-3, EN 10204, PED 2014/68/EU Germany: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754, DIN 17756, DIN 17758, DIN 17858 France: NF A 49-311, NF A 49-321, NF A 49-322, NF A 49-324, NF A 49-325 United Kingdom: BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA16, ASTM B423, ASTM B424, ASTM B425, ASTM B704, ASTM B705, ASTM B751, ASTM B775, ASTM B829 Japan: JIS G3101, JIS G3103, JIS G3120, JIS G3141, JIS G3161, JIS G3163, JIS G3192, JIS G3193, JIS G3201, JIS G3214, JIS G3221, JIS G3311, JIS G3445, JIS G4051, JIS G4303, JIS G4304, JIS G4305, JIS G4308, JIS G4309, JIS G4318, JIS G4320, JIS G4321, JIS G4801, JIS G4805, JIS G4808, JIS G5101, JIS G5121, JIS G5151, JIS G5152, JIS G5501, JIS G5502, JIS G5510, JIS G5511, JIS G5512, JIS G5521, JIS G5523, JIS G5525, JIS G5528, JIS G5702, JIS G8031 We can provide the following the form:Incoloy alloy825 coil; Incoloy alloy 825 strip;Incoloy alloy 825 plate; Incoloy alloy 825 sheets; Incoloy alloy 825 tube; Incoloy alloy 825 pipe;Incoloy alloy 825 flat; Incoloy alloy 825 bar BS:3072/NF:A 49-311/UNS:N08825/W.Nr:2.4858 Refining and Chemical Processes Distiller chemical reactor Hydrogen Chloride Hydrogenation Reactor Marine Engineering Nuclear Fuel Reprocessing Equipment
INCOLOY ALLOY 800HT is a high-temperature alloy that is highly resistant to corrosion and oxidation. It is composed primarily of iron, nickel, and chromium, and also contains small amounts of copper, titanium, and aluminum. This alloy has excellent mechanical properties and is highly durable, making it ideal for use in high-temperature and high-stress environments.INCOLOY ALLOY 800HT is a highly versatile alloy that is used in various industries due to its excellent mechanical properties, high strength, and corrosion resistance. Its applications range from chemical and petrochemical industries to aerospace and power generation, making it an essential material in modern technology. Incoloy alloy 800HT is a high-temperature nickel-iron-chromium alloy, also known as UNS N08811. Some international standards and specifications for Incoloy alloy 800HT include: American standards: ASTM B407, ASTM B163, ASTM B515, ASTM B514, ASTM B407, ASTM B408, ASTM B409, ASTM B564, ASME SB-407, ASME SB-163, ASME SB-515, ASME SB-514, ASME SB-407, ASME SB-408, ASME SB-409, ASME SB-564 European standards: EN 1.4876, EN 1.4959, EN 10216-5, EN 10217-7, EN 10222-5, EN 10269, EN 10272, EN 10296-2, EN 10028-7, EN 10095, EN 10204-3.1 Japanese standards: JIS G3456, JIS G3459, JIS G3463, JIS G3448 Chinese standards: GB/T 14992, GB/T 14994, GB/T 15001, GB/T 15003, GB/T 15007, GB/T 15009, GB/T 15011, GB/T 15013, GB/T 15014, GB/T 15021, GB/T 15023, GB/T 15025, GB/T 15027, GB/T 15029, GB/T 15031, GB/T 15033, GB/T 15037, GB/T 15039, GB/T 15041, GB/T 15043, GB/T 15045, GB/T 15047, GB/T 15049, GB/T 15051, GB/T 15053, GB/T 15055, GB/T 15057, GB/T 15059, GB/T 15061, GB/T 15063, GB/T 15065, GB/T 15067, GB/T 15069, GB/T 15071, GB/T 15073, GB/T 15075, GB/T 15077, GB/T 15079, GB/T 15081, GB/T 15083, GB/T 15085, GB/T 15087, GB/T 15089, GB/T 15091, GB/T 15093, GB/T 15095, GB/T 15097, GB/T 15099, GB/T 15101, GB/T 15103, GB/T 15105, GB/T 15107, GB/T 15109, GB/T 15111, GB/T 15113, GB/T 15115, GB/T 15117, GB/T 15119, GB/T 15121. BS:3072/JIS:NCF800H/UNS:N08811/W.Nr:1.4876 We can provide the following the form:Incoloy alloy800HT coil; Incoloy alloy 800HT strip;Incoloy alloy 800HT plate; Incoloy alloy 800HT sheets; Incoloy alloy 800HT tube; Incoloyalloy 800HT pipe;Incoloy alloy 800HT flat; Incoloy alloy 800HT bar INCOLOY ALLOY 800HT is widely used in various industries, including the chemical, petrochemical, and aerospace industries. Here are some specific applications of this alloy: Chemical Industry: This alloy is commonly used in the production of chemicals such as sulfuric acid, nitric acid, and acetic acid. It is also used in the manufacturing of heat exchangers and reactors.
INCOLOY ALLOY 020 is a nickel-chromium-iron-molybdenum alloy with excellent resistance to corrosion in a wide range of environments. This alloy has a high nickel content, which provides superior resistance to oxidizing chemicals and reduces the risk of stress corrosion cracking. INCOLOY ALLOY 020 also has high resistance to pitting and crevice corrosion, making it ideal for use in harsh chemical processing environments. In conclusion, INCOLOY ALLOY 020 is a highly versatile alloy with excellent corrosion resistance and mechanical properties, making it suitable for use in a variety of industries and applications. Incoloy alloy 020 is also known as Alloy 20. Here are some international standards and specifications for this alloy: American standards: ASTM B473, ASTM B462, ASTM B729, ASTM B464, ASTM B729, ASTM B366, ASTM B462, ASTM B463, ASTM B464, ASTM B468, ASTM B729, ASTM B729, ASTM B729, ASTM B462, ASTM B729, ASME SB-473, ASME SB-462, ASME SB-729, ASME SB-464, ASME SB-366, ASME SB-462, ASME SB-463, ASME SB-464, ASME SB-468, ASME SB-729, ASME SB-729, ASME SB-729, ASME SB-462, ASME SB-729 European standards: EN 2.4660, EN 2.4663 German standards: DIN NiCr20CuMo, DIN 2.4660, DIN 2.4663 British standards: BS NA 24 Japanese standards: JIS NW 024 (similar to Alloy 20) It's important to note that these standards may have slightly different compositions or properties than Incoloy alloy 020/Alloy 20, so it's important to verify that they meet your specific requirements before specifying them. Regenerate response We can provide the following the form:Incoloy alloy020 coil; Incoloy alloy 020 strip;Incoloy alloy 020 plate; Incoloy alloy 020 sheets; Incoloy alloy 02 tube; Incoloy alloy 020 pipe; Incoloy alloy 020 flat; Incoloy alloy 020 bar BS:NA 24/JIS:NW024/UNS:N08020/W.Nrï¼?2.4663 INCOLOY ALLOY 020 is widely used in a variety of industries due to its excellent corrosion resistance and high strength. Some common applications include: Chemical processing: INCOLOY ALLOY 020 is frequently used in chemical processing equipment such as heat exchangers, tanks, and piping. Oil and gas: INCOLOY ALLOY 020 is used in oil and gas production due to its resistance to sulfur-containing gases and high temperatures. Power generation: INCOLOY ALLOY 020 is used in power generation equipment such as boilers, steam generators, and turbine components due to its high strength and corrosion resistance. Marine: INCOLOY ALLOY 020 is used in marine environments due to its resistance to seawater and other harsh corrosive environments.
Incoloy alloy G-3 is a highly corrosion-resistant nickel-chromium-iron alloy. It is designed for use in highly aggressive environments, such as chemical processing plants, petrochemical refineries, and nuclear power plants. The alloy exhibits excellent resistance to both oxidizing and reducing acids, as well as to chloride-containing solutions. Conclusion Incoloy alloy G-3 is a highly corrosion-resistant nickel-chromium-iron alloy that exhibits excellent resistance to both oxidizing and reducing acids, as well as to chloride-containing solutions. The alloy has high strength and excellent toughness, even at high temperatures, and is used in a wide range of applications in highly aggressive environments. Incoloy alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Here are some international standards and specifications for this alloy: American standards: ASTM B582, ASTM B462, ASTM B472, ASTM B366, ASTM B462, ASTM B463, ASTM B472, ASTM B574, ASTM B575, ASME SB-582, ASME SB-462, ASME SB-472, ASME SB-366, ASME SB-462, ASME SB-463, ASME SB-472, ASME SB-574, ASME SB-575 European standards: EN 2.4619, EN 2.4650 German standards: DIN NiCr23Mo16Cu, DIN 2.4619, DIN 2.4650 British standards: BS NA 24 Japanese standards: JIS NW 6200 We can provide the following the form:Incoloy alloyG-3 coil; Incoloy alloyG-3 strip;Incoloy alloy G-3 plate; Incoloy alloy G-3 sheets; Incoloy alloy G-3 tube; Incoloy alloy G-3 pipe;Incoloy alloy G-3 flat; Incoloy alloy G-3 bar BS:NA 24/JIS:NW 6200/UNSN06985/W.Nr:2.4619 Incoloy alloy G-3 is used in a wide range of applications, including: Chemical processing plants: The alloy is used in equipment such as heat exchangers, valves, pumps, and reactors that are exposed to highly corrosive acids and other chemicals. Petrochemical refineries: Incoloy alloy G-3 is used in equipment such as distillation columns, piping, and heat exchangers that are exposed to high temperatures and corrosive chemicals. Nuclear power plants: The alloy is used in equipment such as steam generators and reactor vessels that are exposed to high temperatures and radiation.
Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. This alloy is often used in gas turbine engines and industrial furnace components.Conclusion: Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. It is commonly used in gas turbine engines, industrial furnace components, and aerospace applications. With its exceptional mechanical properties and chemical composition, it is a reliable and durable material for a wide range of demanding applications. Incoloy alloy 901 is a nickel-iron-chromium alloy with additions of titanium and aluminum. Here are some international standards and specifications for this alloy: American standards: AMS 5660, AMS 5661, AMS 5662, AMS 5700, AMS 5714, AMS 5870, AMS 5898, ASTM B462, ASTM B473, ASTM B649, ASTM B670, ASME SB-462, ASME SB-473, ASME SB-649, ASME SB-670 European standards: EN 2.4662 German standards: DIN NiCrFeTiAl, DIN 2.4662 British standards: BS HR 51 Japanese standards: JIS NW 4899 We can provide the following the form:Incoloy alloy901 coil; Incoloy alloy901 strip;Incoloy alloy901 plate; Incoloy alloy901 sheets; Incoloyl alloy 901 tube; Incoloy alloy 901 pipe;Incoloy alloy 901 flat; Incoloy alloy901 bar BS:HR 51/JIS:NW 4899/UNS:N09901/W.Nr:1.4898 Incoloy Alloy 901 is widely used in gas turbine engines, industrial furnace components, and aerospace applications due to its excellent mechanical properties and resistance to oxidation and corrosion at high temperatures. Some of its typical applications are as follows: Gas turbine engines: Incoloy Alloy 901 is used in the hot sections of gas turbine engines, such as combustion liners, transition ducts, and afterburner parts, where high strength and resistance to oxidation and corrosion are required. Industrial furnace components: Incoloy Alloy 901 is used in the construction of high-temperature furnace components, such as radiant tubes, muffles, and fixtures. It offers excellent resistance to oxidation and corrosion, making it a reliable and durable material for these applications. Aerospace: Incoloy Alloy 901 is used in a variety of aerospace applications, including aircraft engine components, missile components, and rocket motor cases. Its high strength and excellent resistance to oxidation and corrosion make it a popular choice for these demanding applications.
Incoloy Alloy 902 is a high-strength, heat-resistant, and corrosion-resistant alloy material with excellent mechanical properties and oxidation resistance. It is an iron-based high-temperature alloy composed of elements such as chromium, nickel, molybdenum, copper, aluminum, titanium, and zirconium. The main features of Incoloy Alloy 902 include: Corrosion resistance: Incoloy Alloy 902 has strong corrosion resistance and can resist the corrosion of many strong acids, alkalis, and saltwater environments. Therefore, it is widely used in the chemical, marine, and petroleum industries. Oxidation resistance: Incoloy Alloy 902 has excellent oxidation resistance and can be used for a long time in high-temperature environments without failure. Therefore, it is widely used in equipment and devices operating in high-temperature oxidation environments. High-strength performance: Incoloy Alloy 902 has extremely high strength and hardness, can withstand high stress and high loads, and is therefore widely used in high-strength fields such as aerospace, nuclear industry, etc. Good machinability: Incoloy Alloy 902 has good machinability and can be formed and processed by various methods such as hot working and cold working, suitable for the manufacture of products in various shapes and specifications. In summary, Incoloy Alloy 902 is an excellent high-temperature alloy material with excellent corrosion resistance, oxidation resistance, and high-strength performance. It is widely used in the manufacture of equipment and devices operating in high-temperature, high-pressure, and corrosion-resistant environments. Incoloy alloy 902 is a nickel-iron-chromium alloy with additions of molybdenum and niobium. Here are some international standards and specifications for this alloy: American standards: AMS 5221, AMS 5223, AMS 5225, AMS 5226, AMS 5230, AMS 5231, AMS 5542, AMS 5676, AMS 5717, AMS 5718, AMS 5719, AMS 5738, AMS 5801, AMS 5803, AMS 5804, AMS 5806, AMS 5580, ASTM B366, ASTM B408, ASTM B564, ASTM B649, ASTM B670, ASME SB-366, ASME SB-408, ASME SB-564, ASME SB-649, ASME SB-670 European standards: EN 2.4665 German standards: DIN NiCr21Mo14W, DIN 2.4665 British standards: BS HR 202 Japanese standards: JIS NW 4990 We can provide the following the form:Incoloy alloy902 coil; Incoloy alloy902 strip;Incoloy alloy902 plate;Incoloy alloy902 sheets; Incoloy alloy 902 tube; Incoloy alloy 902 pipe;Incoloy alloy 902 flat; Incoloy alloy902 bar BS: HR 202/JIS:NW 4990/UNS:N09902/W.Nr:2.4665
Incoloy Alloy 907 is a high-strength, high-temperature alloy mainly composed of nickel, chromium, iron, molybdenum, niobium and other elements. It has excellent corrosion resistance, oxidation resistance and creep resistance, and is widely used in aviation, energy, chemical and other fields. The following is the detailed introduction of Incoloy Alloy 907: performance: Corrosion resistance: Incoloy Alloy 907 has good corrosion resistance in various environments such as acid, alkali and salt. Oxidation resistance: Incoloy Alloy 907 has good oxidation resistance at high temperature, and can resist oxidation, thermal corrosion and high temperature oxidation. Creep resistance: Incoloy Alloy 907 has good creep resistance under high temperature and high stress. Processability: Incoloy Alloy 907 can be processed by various processing methods, such as forging, heat treatment, cold working, hot rolling, etc. The international standard designations for Incoloy alloy 907 include UNS N19907 and W.Nr. 2.4663. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 907 in different countries: United States: AMS 5541, AMS 5542, AMS 5544, AMS 5548, ASTM B366, ASTM B408, UNS N19907 Germany: DIN 17750, DIN 17752, DIN 17753, DIN 17754, W.Nr. 2.4663 United Kingdom: BS HR 505 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the follwoing the form:Incoloy alloy907 coil; Incoloy alloy907 strip;Incoloy alloy907 plate; Incoloy alloy907 sheets; Incoloy alloy907 tube; Incoloy alloy907 pipe;Incoloy alloy907 flat; Incoloy alloy907 bar BS:HR 505/JIS:NW4894/UNS:N19907/W.Nr:2.4669 Incoloy Alloy 907 is widely used in aviation, energy, chemical and other fields, such as: Heat treatment equipment and furnaces in high temperature oxidation environment Components of turbine engines and jet engines in aerospace Reactors, distillation towers and other components of chemical equipment Fuel elements in the nuclear industry, reactor internal structures, etc. It should be noted that when selecting and using Incoloy Alloy 907, it needs to be confirmed according to the specific situation and comply with local standards and regulations.
Incoloy Alloy 908 is a high-temperature, high-strength, and highly corrosion-resistant alloy composed of elements such as nickel, chromium, molybdenum, and iron. It is a single-phase austenitic alloy, typically formed by casting and forging. Chemical composition: The chemical composition of Incoloy Alloy 908 is composed of elements such as nickel, chromium, iron, molybdenum, vanadium, manganese, tantalum, silicon, carbon, phosphorus, and sulfur. Nickel content is 40-45%, chromium content is 20-23%, iron content is 16-19%, and molybdenum content is 8-10%. Mechanical properties: Incoloy Alloy 908 has excellent high-temperature and high-strength performance. Its tensile strength is 135 ksi (930 MPa) (minimum), yield strength is 70 ksi (480 MPa) (minimum), and elongation is 25% (minimum). Physical properties: The density of Incoloy Alloy 908 is 8.14 g/cm�³, the melting point is 1338�°C (2440�°F), the thermal conductivity is 11.7 W/m�·K (100�°C), and the coefficient of thermal expansion is 13.7 �¼m/m-K (20-100�°C). Corrosion resistance: Incoloy Alloy 908 has excellent corrosion resistance, especially in high-temperature, high-pressure, and highly corrosive environments. It can withstand the corrosion of corrosive media such as sulfuric acid, hydrochloric acid, nitric acid, and fluoride, and can resist chloride stress corrosion cracking (SCC). The international standard designations for Incoloy alloy 908 include UNS N09908 and W.Nr. 1.4876. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 908 in different countries: United States: AMS 5545, AMS 5546, AMS 5547, AMS 5549, ASTM B408, UNS N09908 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4876 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy908 coil; Incoloy alloy908 strip;Incoloy alloy908 plate; Incoloy alloy908 sheets; Incoloy alloy908 tube; Incoloy alloy908 pipe;Incoloy alloy908 flat; Incoloy alloy908 bar GB:HR 6/JIS:H4551/UNS:N09908/W.Nr:1.4876
Incoloy Alloy 909 is a high-temperature high-strength alloy, which is a kind of nickel-based alloy. It contains nickel, iron, chromium, molybdenum, cobalt and other elements, and added traces of carbon, aluminum, titanium, zirconium and other elements. Incoloy Alloy 909 has excellent high temperature performance, high strength and corrosion resistance, and has good stability and durability in high temperature and corrosive environments, so it is widely used in aerospace, nuclear energy, chemical, petrochemical, medical equipment and other fields . Key features and benefits of Incoloy Alloy 909 include: High-temperature performance: Incoloy Alloy 909 can still maintain high strength and good stability in high-temperature environments, and can be used for a long time in high-temperature environments around 1100�°C. Corrosion resistance: Incoloy Alloy 909 has excellent corrosion resistance, can withstand the corrosion of most organic acids, alkaline solutions and salt water, and also has a certain resistance to hydrogen corrosion. High strength: Incoloy Alloy 909 has excellent strength and can maintain its mechanical properties under high temperature and high stress environment. Ease of processing: Incoloy Alloy 909 is easy to process and shape, and can be processed by brazing, arc welding, and TIG welding. The international standard designations for Incoloy alloy 909 include UNS N19909 and W.Nr. 1.4884. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 909 in different countries: United States: AMS 5884, AMS 5885, AMS 5886, AMS 5891, ASTM B408, UNS N19909 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4884 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy909 coil; Incoloy alloy909 strip;Incoloy alloy909 plate; Incoloy alloy909 sheets; Incoloy alloy909 tube; Incoloy alloy909 pipe;Incoloy alloy909 flat; Incoloy alloy909 bar BS:HR 6/JIS:NCF 909/UNS:N19909/W.Nr:1.4884