Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on. Features Fast drying Colorful and easy to use Full paint film and high gloss Application Suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions. Usage 1.Shake well the can about two minutes before use to ensure that the paint is evenly mixed; 2.First spray on a small area of the test panel to confirm the accuracy of the selected color; 3.From 15 to 30cm away from the surface of the object to be sprayed, use a forefinger to press the spray head back and forth; 4.When a small amount of liquid remaining cannot be ejected, rotate the nozzle 180�° and spray it again. 5.If it is not sprayed once, put the paint can upside down before storing it, press down on the spray head for about 3 seconds, clear the spray head to prevent the nozzle from sticking. Finishing work: 1.After spraying, the sample should be placed in a clean and ventilated environment for about 12 hours; 2.If not sprayed, the remaining material must be stored at room temperature and protected from light.
Theaoson water-based spray paint is composed of aerosol cans, aerosol valves, paint and spray agent. It is widely used in the following fields: repairing paint defects, molds, industrial machinery, buildings, steel structures, advertising, marking, graffiti and so on. Features 1.Fast drying 2.Colorful and easy to use 3.Full paint film and high gloss 4.Strong adhesion Application It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions
Theaoson water-based spray paint is composed of aerosol cans, aerosol valves, paint and spray agent. It is widely used in the following fields: repairing paint defects, molds, industrial machinery, buildings, steel structures, advertising, marking, graffiti and so on. Features 1.Fast drying 2.Colorful and easy to use 3.Full paint film and high gloss 4.Strong adhesion Application It is suitable for metal, wood, clay bricks, glass, asbestos tiles, plastics, ceramics and other materials. Due to the diversity of materials during the specific construction, a small-scale test spray must be performed first, and no large-scale construction can be conducted after no adverse reactions
Advantage: 1.Cheap alternative. 2.Wash resistant. 3.Sustainable. 4.Protection against dirt. 5.Removable. 6.Dry time: < 5 minute. 7.Spray rate: > 98%. Suitable Range: It can be easily applied by spraying on most of surfaces, such as metal, alloy, plastic, acrylic, woods, glass, and so on.
Over the years, we have emerged as one-stop destination for acquiring Parasol Paint and Varnish Removers at leading market prices! We strive to deliver powerful and high performance paint and varnish remover that is precisely developed in line with stated quality norms. We are noted Manufacturer, Exporter & Supplier of Parasol Paint and Varnish Removers and assure time bound deliveries. More about Parasol Paint and Varnish Removers It can effectively use to strip paint and varnish from wooden surface like old furniture & from metal surface like Automobile bodies e.g. car, bus, truck, auto, tractor, etc. & home appliances like refrigerators, cupboards & fans etc. & employed in wide array of industrial and household applications such as paint shops, workshops, garages, railways, defense, shipping industries & at home. These unique product offer impressive performance on almost all types of paint system like two pack wood finishes, air drying & baking industrial finishes like melaminised, alkyds, polyamides, polyurethane, polyester & powder coating. The main characteristic properties of PARASOL is it can dilute with NC thinner with almost no loss in performance characteristic when apply on metals. This is a significant benefit to user as cost & labor saving can be achieved while maintaining or even improving the stripping performance. PACKING : 500g, 1Kg & bulk. Packaging Details 500g, 1Kg, Bulk packing also available. Additional Information Specifications PACKING : 500g, 1Kg & bulk.
A spray paint for marking masonry, pavements, asphalt, cement and wood. It is resistant to weathering and wear. It is available in fluorescent colors. The product comes with a special 360 valve, so it can be used in any position.
Ideal for creating general parking signs and signaling danger zones. To make visible the terms of reference such as siting, excavation, demarcation of maintenance works. It is resistant to weathering and chemicals. It can be used on numerous surfaces such as cement, asphalt, glass, wood, synthetic materials. Lines of high precision can be made with this product. The width of the line can vary from 4 to 6 inches depending on the setting. The length varies depending on the traveling speed and the porosity of the surface: 40-50 m.
PAINT REFILL DME Bottle filled with 300ml mix of solvents, propellants and additives. It is compatible with most paints: acrylic, nitro-acrylic, nitro-synthetic, nitrocellulose. The reseller adds the paint according to the required color. In case of special filling the color can slightly change. We recommend using the product soon after filling the paint
It's a professional enamel spray that is resistant to scratches, alcohol and gasoline. Ideal for painting tractors and agriculture machines. Before applying this paint it is mandatory to use the suitable primer (V400PRIMER3 or V400PRIMER5) Sku : V400CAR
It is the enamel that makes surfaces bright and visible from a distance, even in the absence of light. The fluorescent effect is brought out by applying AMBRO-SOL FLUORESCENT on a white background. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku : V400FLUOR
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300 C-700 C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don't expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180 ' C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it's advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle. Sku:V400TEMP
It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers. Sku:V400FAS
It's the enamel with antiquing effect for internal and external, based on lamellar micaceous iron-oxide, particularly suitable for the protection from the elements and the decoration of internal and external furnishing. The use of special corrosion inhibitors and the possibility of applying high thicknes-ses, allow to obtain excellent protection over time. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Application: metal and wood surface, plaster, doors, railings, gates, metal grates, metal cabinets, flashings, furniture, garden furniture. Sku:V400MIC
RAD: it s a special paint for the decoration and protection of all internal and external surfaces of heaters and radiators, resistant to 120 ' C. Suitable for home radiators, heat registers, electric convectors. PAST.2 it's an acrylic enamel for the decoration and protection of all surfaces of all appliances, as washing machines, dishwashers, refrigerators, etc. It dries to the touch in roughly 15 minutes and dries fully in roughly 24 hours. Sku:V400RAD/PAST.2
A metallic enamel that has a particular brightness that looks similar to a mirror. It is adhesive and can be used on any material that is not non-stick (Polyethylene, etc..). Ambro-Sol Leafing is designed for indoor/outdoor use to brighten different surfaces and objects such as frames, furniture, iron, vases, mask, cups, medals, Christmas ornaments, etc. It is dry to the touch approximately 30 minutes after use and its completely dry approximately 1 hour after application. It does not provide protection from abrasions. Once applied handle with care. Sku:V400MET
This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle. Sku:V400PRIMER
SHRUB COVER It's a formulate that gives high hiding power after just one coat to completely eliminate any stain at all by penetrating deep below the surface and then creating a seal for the prevention of new stains. Suitable for all stains caused by smoke on walls, mildew, and dirt in general. The STAIN COVER covers any stain when applied evenly over the area to be treated. The removal of particularly â??resistantâ?? stains may require repeated application of product always from a distance of 20-30 cm, paying attention to avoid runs. The product dries in 5-8 minutes if applied at a temperature of 20�°C. Sku:V500COPRI
This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle. Sku:V400PAST
Bituminous tar-based insulating protector, ideal for giving protection from abrasion and stone hits to all those parts of the body that are particularly exposed. Resistant to atmospheric agents. Product suitable for any type of plastic, it does not require a primer. It dries to the touch in about 30 minutes and in depth in 24 hours. Before use, shake the can for at least 2 minutes. Cod .:V400BODY
Model: K5 Nano Atomization Spray Size: 223x192x65mm, materials: PP Capacity: 380ML Voltage:DC3.7V,Current:15W With Built-in rechargeable battery: 1800mAh With UV light: 6pcs Spray distance:1-2.5m Function: Nano Atomization spray gun,Disinfection Gun,Humidifier, Air Freshner Dispenser
