XQ series of hydraulic power tongs have inner cam rolling-up clamping mechanism, with a hydraulic backup tong. It is an ideal tool for makeup or breakout of various of tubings, and small sizes of casings and drill pipes in workover operation. The tong with extra long rod is available for backup tong to grip tubing body. The power tong also can be equipped with automatic torque control system. The tongs are designed and manufactured according to SY/T5074 standard and API Spec 7K specification for drilling and well serviceing equipment Technical parameters: Applicable range main tong 60-89mm(2 3/8-3 1/2) Applicable range backup tong 60-114mm (2 3/8-4 1/2 inch) Max torque 3300N.m/2213ft.lbf Speed 30-90rpm Rated pressure 10Mpa/1450psi Max. flow 80L/min 21gpm size 25.6 16.9 21.7inch weight 158kg/348lb
1. Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
1. Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
1. Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
Lhbz mechanical drilling jar is a full mechanical drilling jar, it also can be use as fishing tool. It generates upward jarring as well as downward jarring which can solve tight pull or sticking troubles during drilling. It is the first optional drilling jar for vertical well, deep well, directional well and complicated well operations. Model, lhbz121, lhbz165/159, lhbz203/197 Od mm(inch), 121 (4 3/4), 165(6 1/2) /159(6 1/4), 203(8) 197( 7 3/4) Id mm(inch), 50.8 (2), 57.2( 2 1/4), 71.4(2 13/16) Oal(locking place)mm (inch), 6370(251), 7015(276), 7310 (288) Upper stroke mm (inch), 210 ( 8 1/4), 142( 5 9/16), 145 (5 11/16) Lower stroke mm (inch), 197 (7 3/4), 172 (6 3/4), 178 (7) Conn., nc38, nc50, 6 5/8reg Max. Tensile load(mn), 1.4, 2.2, 2.5 Max. Working torque (kn. M), 13, 15, 20 Upward jarring force(kn), 450, 630, 820 Downward jarring force(kn), 230, 360, 460 Pumping area(cmâ²), 62, 100, 174
high efficiency All In One DTH Drilling Rig With less price and more equipment, JK810, the most cost-effective representation product of JK Drilling and Atlas Copco as the solution to the integration of drilling rig and air compressor, is set to revolutionize your imagination. JK810 is an All-In-One hydraulic DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. The FOPS-approved cabin and automatic pipe handling system come standard. Heavy-duty undercarriage with wide tracks ensures both extreme maneuverability and improved safety. The hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. General Weight kg 14300 Length mm 9920 (transport) Width mm 2400 Height mm 3300 Undercarriage Track width mm 350 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking speed km/h 2 (low) / 3 (high) Grade ability ° 20° Engine Model QSL8.9-C360-30 Type Water-cooled six-cylinder EFI diesel engine Rated power kw/rpm 264/2100 Fuel tank capacity L 450-500 Air compressor Model Atlas Copco two-stage rotary screw air compressor Working pressure bar 20 Max. FAD m3/min 18.5 Rotary motor Rotation rate rpm 0-85 Max.rotation torque Nm 3300 Feeding method Hydraulic motor + Chain Feeding force kN 12 Lifting force kN 18 Feed Feeding stroke mm 3850 Feed extension mm 1100 Drill pipe changer Drilling diameter mm Φ90 - Φ150 Drilling depth m 21 Pipe diameter mm Φ76 Pipe length m 3 Pipe capacity piece 6+1 Hammer specs 4" - 5" Dust collector Collecting method Hydraulic dust collecting
1. Characteristics of XY-8 hydraulic core drilling rig ·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. ·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. ·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). ·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. ·The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. ·Light weight and can be disassembled to many parts, net weight 6500Kg. ·The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. ·With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. ·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents 2. Parameters of XY-8 hydraulic core drilling rig Drilling angel 0-360° Electric motor Y280S-4 /75KW Diesel engine YC6A240-33/ 177KW Spindle 96mm Forward speed 74/106/150/208/300/431 Reserve speed 110rpm Forward speed 110/157/222/309/445/640/905/1256 Reserve speed 74rpm Max.torque of spindle 8000nm Spindle stroke 800mm Max.lifting force of spindle 180kn Max.thrust of spindle 110kn Type Planetary gear drive, hand brake Wire rope caliber 21.5mm(6X19) Drum capacity for rope 120m Max.lifting force(single rope) 60kn
JK830 All-In-One DTH Automatic Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Hydraulic Crawler Drills. Crawler Mounted Drilling Rigs JK830, the new all-in-one DTH drilling rig which features JK Drilling's latest automation technology, is efficient, reliable and easily operational. With a FOPS-approved cabin coming standard, the rig is also equipped with automatic pipe exchanger and widened heavy-duty undercarriage that can provides both fast maneuver and better safety. The hydraulic dust collector meets the requirement of environment protection and is a reliable solution to modern mining with less environmental impacts. More information you can views here Items Specs Unit Value Body Weight kg 24000 Length mm 9785 Width mm 3200 Height mm 3500 Undercarriage Track length mm 3646 Ground contact length mm 2875 Track center distance mm 2200(whole width 2700) Track width mm 500 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking motor Eaton Walking speed Km/h 1.8(low), 2.95(high) Max. tractive force KN 170 Grade ability ° 20° Engine Model QSZ13-C450-30 (Cummins) Type Water-cooled six-cylinder EFI diesel engine Rated power Kw/RPM 335/2100 Fuel tank capacity L 760 Hydraulic pump/valve Main pump Variable load-sensing piston pump Main valve Load-sensing valve Manufacturer Rexroth Air compressor Model Airman SK900 Type Dual stage rotary screw air compressor Working pressure bar 17.5 (medium), 24 (high) Max. air delivery m3/min 23.5 Rotary motor Hydraulic rotation unit Dual motors (Eaton) Rotation rate rpm 0-70 Max. rotation torque N.m 3900 Feeding method Motor-driven planetary gearbox + Chain Fast feeding rate m/ min 30 Feeding rate m/ min 4.7 Max. lifting rate m/ min 5.5 Feeding force kN 0-30 (adjustable) Lifting force kN 30 Feeding boom Length mm 8500 Feeding stroke mm 5500 Feed extension mm 800 Swing angle ° Left 95°, right 35° Drilling arm Type mm Telescopic single straight boom (length 760mm) Tilt angle ° 30°(up), 10°(down) Swing angle ° Left(cabin side)10°, Right 35° Pipe exchanger Pipe diameter mm 102/114 Pipe length m 5 Drilling diameter mm 115-203 Drilling depth m 30 Pipe capacity pc 5+1 Hammer specs 5"/ 6" Dust collector Filter element 20 Collecting method Air pulse jet Dust cover Sliding
All In One DTH Automatic Drilling Rig Machine Introduction: JK650 is an All-In-One DTH drilling rig, which brings you more automation, higher working efficiency, better reliability and simpler operation. JK650 is the integration of drilling rig and air compressor, the design has many advantages like facilitating air compressor transport and management on mining site, retaining more air energy and requiring less manpower. The equipped high-performance hydraulic dust collecting system meets the latest environmental protection regulations and it's a reliable solution to realize the modern green mining. The high-output Atlas Copco air compressor delivers pressure of 17bar and FAD of 17m³/min. Powerful and reliable, it suits rock formations of various hardness and offers high penetration rate with ease. All In One DTH Automatic Drilling Rig Machine Parameters: General Weight kg 10000 Length mm 7863 Width mm 2400 Height mm 3080 Undercarriage Track width mm 300 Ground clearance mm 370 Track oscillation ° ±10° Walking speed km/h 2 (low) / 3 (high) Grade ability ° 27° Engine Model QSC8.3-C260-30 Type Water-cooled six-cylinder EFI diesel engine Rated power kw/rpm 194/2100 Fuel tank capacity L 400 Air compressor Model Atlas Copco Working pressure bar 17 (high) Max. FAD m3/min 17 Rotary motor Rotation rate rpm 0-70 Max. rotation torque Nm 2904 Feeding method Motor-driven planetary gearbox + Chain Feeding force kN 12 Lifting force kN 18 Feeding stroke mm 4148 Feed extension mm 1200 Drilling depth & diameter Drilling diameter mm Φ90-Φ150 Drilling depth m 50 Pipe length m 3 Pipe diameter mm 76 Dust collector Collecting method Dry tpye hydraulic dust collecting (Optional wet type) Cheap Drilling Rig Machine For Sale, we guarantee product quality and delivery time!
Steel tools, non sparking tools, tools kits, stainless tools.
Wrecking bar(heavy duty), chisel(heavy duty), naipuller, striking tools, hammer products, garden tools, spanner and pliers, leather tools kits..
1. Characteristic of XY-8 hydraulic drilling rig Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card. Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization. Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m). Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state. The rig adopts vertical shaft instead of the traditional hexagonal vertical shaft, exponentially increasing gyrator transmission efficiency and carrying capacity . And new spindle shaft has big hole diameter (96 mm), with twin cylinder hydraulic feed the trip is much longer (up to 1000mm), especially suitable for large diameter drill pipe wireline coring, help to improve drilling efficiency and reduce the hole accident. Light weight and can be disassembled to many parts, net weight 6500Kg. The chuck is hydraulic-release normally closed hydraulic chuck, new structure, good compensatory. Carbide inset&welded slip structure, has large clamping force, long life, reliable operation. With water brake, in deep hole drilling, its safer and more smooth to put down the drill pipe. hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair. The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling. With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.
PTP Working Center Machine Main Parts: 1. Vacuum dual-zone & double-position design with vacuum suction cups, can achieve fast positioning for diversified customized production. 2. The machine body structure is made of thick-walled welded square steel tube, and with tempering treatment at 5 sides, which ensure the body durable and never deformation. 3. German imported HOMAG-Schmalz countertop can move freely, which is convenient for the processing of different size workpiece. Pneumatic clamps enable the machine to process special shaped or irregular parts too. 4. Taiwan made guide rail and ball screw, high precision, long service lift, good stability. 5. Taiwan planetary reducer, with small volume, large torque, high transmission efficiency and wide range of speed reduction. 6. Centralized automatic lubrication system, can supply oil to the guide rail and ball screw at regular time and rationing, ensuring their service life. 7. Workpiece positioning cylinder guarantee more accurate positioning of each workpiece. 8. Italy HSD numerical control drilling head can finish all drilling on 5 sides of the workpiece upon one time positioning. 9. Carousel automatic tool change system, with 8pcs capacity of tools magazine, need only 8 seconds to change tools freely. 10. Vacuum table can adsorb the entire panel or point-to-point. The entire panel can be processed directly without sawing in advance. Convenient loading and unloading, shorten the auxiliary time greatly. Performance Features: 1. Be suitable for processing diversified complicated products, with wide rage of functions, including routing, drilling, cutting, side milling, sawing, etc.. 2. Break the traditional processing mode, really save time and effort. Make the production get rid of artificial dependence, significantly shorten the production process and processing time. 3. Can be interfaced with panel production line software, is one essential equipment for the customized panel furniture production line. Applicable: 1. Furniture Industry: panel furniture, office furniture, wooden doors, cabinets. 2. Wood Products: stereo box, game cabinets, computer desks, sewing machines, musical instruments. 3. Panel Processing: insulation materials, plastic parts, chemical parts, PCB, inner body of motor car, bowling track, stairs, anti-Bethe plates, epoxy resin, ABS, PP, PE, etc. carbon mixed compound. 4. Decoration Industry: acrylic, PVC, MDF(density board), artificial stone, organic glass, and other soft-metal sheets made of aluminum or copper.
Dewalt Tools 20v
Machine Capacity 40/50mm 38 HD 38mm LD 25mm MD 25mm MD 25mm LD 20/200 DRILLING (C.I.) 45 38 38 38 25 25 20 DRILLING (M.S.) 40 38 38 35 25 25 20 TAPPING CAP 25 20 15 20 15 15 10 DRILLING HEAD TAPPER SPINDLE MT-4 MT-4 MT-4 MT-3 MT-3 MT-3 MT-2 Quil Movement 240 240 230 240 175 155 120 SPEEDS No. Range of Spindle 8 8 8 8 8 8 8 Spindle Speed Min. /Max. 45 to 1000 70 to 2000 70 to 2000 70 to 2000 130 to 2600 130 to 2600 80 to 3500 FEEDS No. Range of Feed Manual Manual Manual Manual Manual Manual Manual WORKING RANGE Dist. From Spindle Center to Column Face 350 300 280 250 250 230 200 Max. Dist. From Spindle to Base Plte 1030 1000 940 940 970 1050 900 Max. Dist. From Spindle to Work table 550 530 530 530 530 680 650 WORKING TABLE Table Diameter 485*485 422*422 380*380 370 Round 325*325 310*310 250*250 Baste Plate & Column Column Diameter 135 108 101 92 92 92 74 Base Plate 800*525 680*430 630*405 630*405 580*365 370*550 480*310 No. of â??tâ?? Slots 2 2 2 2 2 2 2 POWER Drilling Motor 2HP 960 RPM 1.5 HP 1400 RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1400RPM 1 HP 1440RPM 0.5 HP 1400RPM WEIGHT( Kgs.) Approximate 550 kg 375 kg. 300 kg. 275 kg. 225 KG. 185 KG. 110 KG V-BELT No. B-71 B-59 B-56 B-52 B-52 B-49 A-44
EBZ200 Rock Tunneling Machine,Roadheader,roadheader tunneling machine,Construction machines EBZ200 is a kind of cantilever tunneling machine which is integrating cutting, loading and traveling function, applicable to the coal or semi-coal tunnel. Introduction EBZ200 is a kind of cantilever tunneling machine which is integrating cutting, loading and traveling function, applicable to the coal or semi-coal tunnel. Main features 1. Compact structure, easy to operate. With external spray device to reduce the dust during cutting. 2.Small conical diameter cutter, bigger force on the simple teeth. The layout of the teeth is reasonable, more easily to break rock and get through the fault, with less vibration and better stability. 3. Swiveling and lifting or lowering of the cutter can be achieved simultaneously, curve cutting can be achieved. 4. Hydraulic parts all imported. 5. Adoption of unique separate system to reduce accident, improving in loading capacity. 6. Optional hydraulic anchor drill drive device, driving one or two machine to operate. Technical parameters Model EBZ200 Weightï¼?tï¼? 58 Overall dimension ï¼?mmï¼? 10500*2700*1840 powerï¼?KWï¼? 310+11 Power stationï¼?KWï¼? 110 Cutting powerï¼?KWï¼? 200 Cutter speed ï¼?rPMï¼? 46/23 Telescopic lengthï¼?mmï¼? 650 Max heightï¼?mmï¼? 5200 Max widthï¼?mmï¼? 6500 Rock hardnessï¼?MPaï¼? 100 Traveling speedï¼?m/minï¼? 0-10 Width of track shoes ï¼?mmï¼? 650 Ground pressure ration ï¼?MPaï¼? 0.135 Load type Separate spider voltageï¼?Vï¼? 1140 Applied tunnel gradient 18 Hebei Zhongxuan Construction Machinery Co., Ltd. is a professional company which specialized in the production and sales of engineering machinery, mining machinery, hydraulic machinery, industrial pumps and accessories. We have our own manufacture base and cooperate with international renowned brand in hydraulic components purchasing, such as Bosch Rexroth, Harvey, Parker, Kawasaki and others, thus ensuring that the companyis always market leader in this industry. If you want to know more about the product, please click here.
Crawler drill, crawller drill, drill, drilling, drifter, hammer, hamma, jumbo drill, drill jumbo, tunnelling, drilling rig, drill rig, rock bit, rock drilling, button bit, taper bit, shank, shank adapter, sleeve, coupling sleeve, rod, extension rod, rock drill, rockdrill, rockdrilling, rock tools, mine, mining , mining equipment, hardrock, hard rock, hard rock drilling, hardrock drilling, over haul, overhaul, seal kits, sealkit, striker bar, shank adapter, striking bar, coupling, drill rod, orbit motor, diaphragm.
Power tools, cordless drill, electric tools, electric drill, impact wrench, impact driver, angle grinder, portable tools, cutter, trimmer, rotary hammer, marble cutter.
Frozen seafood, ppe branded nitrile gloves otg / production orders, earth drills, augers, trenchers worldwide, other industry bulk material..
A drill chuck is a clamping device that is attached to the spindle of a drill, cordless drill, compact screwdriver, CNC machine tool or hammer drill and has the task of holding insert tools such as drills, bits and other insert tools.
