Flat Cable M&P is able to support a full line of flat cable and flat ribbon cable for electronic applications. Providing both power and data transmissions, flat cables are mainly used for internal connections within the equipment. They are available in a wide range of configurations to accommodate different connection and data transmission requirements and the range of sizes of the equipment using the cables. Flat cables provide consistent performance due to their layout and the spacing between the cables and are lighter, thinner and more flexible than other cables. Features of Our Flat Cables & Wire * Flat, ribbon and twisted configurations, with different levels of flexibility. * Shielded or jacketed cable to reduce signal interference. * Range of pitches and pin configurations to accommodate the application requirements. * Easy to fasten with clamps, adhesive, and tape. We provide custom services, including marking, kitting and custom cable design to provide you with a custom solution for your cabling application. Contact us to find out more about Flat Cables and Wires.
ST-7601S UL Cable Vertical-Tray Flaming Test Room (UL1685) Standards: According to the clause 9.6 & 9.7 of UL1685-2007, UL2556-2007 Scope: Apply to check the vertical-tray fire test for determining values of cable flame propagation and smoke release when the cables are subjected to a flaming ignition source. (It is nothing to the purpose of cables, such as the electric power, telecommunications etc.) Main components: Main consist of Ignition source & supply fire control system, collection hood & exhaust duct flux control system, pressure measurement instrumentation of gas, smoke measurement instruments & temperature measurement system, flame height measurement system etc. Technical parameter: 1.Test room: Fire resistance bricks for walls and which density is 1698kg/m3, Interface spray black paint, and the outer size of the room is W2438*D2438*H3353mm 2.Door: Stainless steel frame and wired-glass door, the overall size is W0.9*H2.0m 3.Smoke collection hood: Which made by stainless steel, each side is to be sloped 400, the hood as a cube and each side length is 914mm, there is a dust mesh under the hood and each side length is 610mm 4.Observation window: Which as a square and each side length is 457mm, 1295mm distance from the lower side of the window to floor, 1143mm distance from right of the window to the wall 5.Air inlets: which size are 559*343mm, 914*305mm, 2438*343mm 6.Exhaust duct: L9000*Ø406mm, install it at the centered in on the right side of the cube hood 7.Cable tray: H2400mm, the rundle as a square which size is L305*W25*D25, and both rundles distance is 299mm 8.Burner: L341*30mm with 242 holes 9.Gas flux: 13.2L/min, 0.1Mpa for gas pressure 10.Flux checking: The differential pressure flow-meter sense smoke pipeline flow speed , provide basis for the control of fan speed 11.Light transmittance: photocell sense the smoke density during the flaming 12.Height of flame: Infrared visible light show the current height of the flame real-time 13.Special software: Draw up the curve by the pip flow, smoke density, height of the flame ,and form a table automatically, through the printer printing 14.Control system: 5.7inch color touch screen, PLC from Japanese Panasonic, SCM, 16 bits high-performance AD transform etc Polywood case
Raw materialPVC,ABS,PS and function additives Width 50-1200mm Side rail height 40-200mm Length Max 4000mm , cut to size as requirement Color Silver gray , customized color supported MOQ 1000mm Structure Integrated stucture Combined structure TypeChannel typeChannel , ladder ,tray Shape of cover Single layer cover and double hollow design coverSolid layer cover Thickness of baseboard8mm ,10mm8mm,10mm Thickness of cover 2mmïsingle layerï, 8mmïdouble layer hollow structureï8mmïdouble layer hollow structureï
The cable design conforms to the requirements of national standard GB/T12706-2008 and IEC60502 recommended by international Electrotechnical Commission. The normal operating temperature of the conductor of polyvinyl and XLPE insulated cable is 70â?? and 90â?? ,Xlpe cable not only has excellent electrical performance, high working temperature, large transmission capacity, but also has the advantages of simple structure, small outer diameter, light weight, easy installation and use, and unrestricted laying drop. It is widely used in industrial and mining enterprises and urban power grid.
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
Flexible fireproof cables are composed of copper stranded wires, mineral compound insulation, and mineral compound sheaths. This kind of cable has non-combustible, smoke-free, non-toxic and fire-resistant characteristics. The structure of the flexible mineral insulated cable adopts a flexible structure and materials that are made of mineral compounds, which make up for the defects of hard structure, flammability, and toxicity. It also has some advantages that other cables cannot have, such as: fire resistance, large current carrying capacity, Impact voltage resistance, mechanical damage resistance, halogen-free, non-toxic, explosion-proof, waterproof, corrosion resistance, long life, safety, overload resistance, high temperature resistance, low cost, etc. Flexible fireproof cables have an important role in protecting lives, materials, and information security. They are used in trunk lines, fire lines, escape rescue systems, such as emergency lighting, fire monitoring, alarm systems, elevator systems, smoke exhaust systems, and control lines, etc. Flexible fireproof fireproof cables used in trunk lines, fire lines, escape and rescue systems, such as emergency lighting, fire monitoring, alarm system, elevator system, smoke exhaust system, and control lines, etc. Flexible fireproof fireproof cables used in Public buildings: high-rise buildings, underground buildings, hotels and restaurants, hospitals, schools, business centers, government affairs centers, department stores, large supermarkets, logistics warehouses, financial institutions such as banks, securities and insurance, post and telecommunications centers, power control rooms, substation rooms, museums, memorials and other historic buildings. Flexible fireproof fireproof cables used in Infrastructure: airport terminals, stations, hub centers, ports, subway systems, Bridges, tunnels. Flexible fireproof fireproof cables used in Industry: coal mining, coal chemical industry, oil field mining, petrochemical industry, oil refinery, metallurgical industry, iron and steel industry, shipbuilding industry, aerospace, electric power industry, pharmaceutical industry, glass industry, paper industry, military system. Flexible fireproof fireproof cables used in Fire prevention, explosion prevention, high temperature places: oil depot and gas station, natural gas transmission and compression station, garden landscape, historic sites, wood structure buildings
Coal Mine Cable has two type :Flame retardant flexible high and low voltage cable for coal mine, the range is rated class 8.7/15kv and below Rubber insulated portable retardant cable for a coal industry ground Underground coal mining and integrated platform, substations, Shearer, transportation Machines and other mining equipment for power transmission, with excellent products Retardant, impact resistance, drag grinding. Long life, explosion and two Harder soft features. It is suitable for the transmission of electric energy by various mining equipment such as ground and underground integrated mining platform, substation, coal shearer, transport plane, etc.
Instrumentation circuits cable is used for computer based automatic control system, especially for computer distributed control system, transmission of production device process variable detection, control, interlocking, alarm lamp analog and digital signals, the product has excellent anti-interference performance, long-term working temperature -40~105.
This Mobile flat cable is suitable for the installation and use of hanging cable and towing cable of field line, electric appliance instrument, electronic equipment and automation device in electric power, chemical industry, metallurgy, port, freight yard, mine and other industries. Products with soft, oil resistance, wear resistance, tensile properties; The product has the characteristics of wide application range and long service life.
The special explosion-proof cable is composed of conductor, insulation, high-strength braided explosion-proof reinforcement layer, explosion-proof armor layer and antistatic outer sheath. According to the different needs of customers, the insulation layer is divided into inorganic mineral insulation, rubber insulation and plastic insulation. Under the protection of the explosion-proof reinforced layer and explosion-proof armor, the special explosion-proof cable can withstand the destructive force of 55 kg of TNT explosives within a certain distance. At the same time, the anti-static outer sheath can effectively guide the static electricity generated by the friction between the cable and the non-insulator, prevent the fire, explosion and other safety accidents caused by static electricity in military facilities, and perfectly solve the technical problem that the "cable static bundle" is easy to detonate. The special explosion-proof cable also solves the current national defense combat readiness facilities, such as ammunition depots, hangars, military ports, caverns, military and civilian airports, tunnels, military exercise bases, large-scale power, chemical, coal, subway hazardous chemical wharf and other electrical equipment facilities Safety issues of explosion-proof system or unit power transmission. Inorganic mineral insulated explosion-proof cables also have: low-smoke, halogen-free, flame-retardant, low-toxicity, fire-proof and other combustion characteristics, and have passed the most demanding C, W, Z and BS8491 fire tests in the British BS6387. At the same time, the cable has good flexibility, Features such as strong compression resistance and long manufacturing length. Special explosion-proof cable is suitable for ammunition depots, hangars, military ports, caverns, military and civil airports, tunnels, military exercise bases, large electric power, chemical, coal mine, subway dangerous wharves
The characteristics of the new type of ocean power cable are as follows: the cable core is composed of insulated cable core and waterproof filling rope twisted together; An inner sheath layer, an armoring layer and an outer sheath layer made of polyolefin are successively arranged on the outer core of the cable from inside to outside. With high softness and according to the characteristics of sea salt fog, strong light, wind and rain, easy to mildew. The above environmental factors are fully considered in the selection of cable raw materials. The cable has the environmental requirements of anti-salt spray, anti-ultraviolet light, anti-seawater and anti-mildew under the condition of meeting its own requirements. It is suitable for military power distribution network or industrial facilities in Marine environment. Its remarkable technical characteristics are high mechanical strength, oil resistance, mud resistance, uv resistance, bunching flame retardant/fire prevention, high temperature resistance, low temperature resistance, etc. The cable adopts the structure design of power core, communication and data transmission cable integrated.
The electric vehicle charging cable is used to connect the electric vehicle charging device and charging infrastructure, so as to carry out power transmission for electric vehicles, and is equipped with a certain number of signal lines, control lines, power auxiliary lines, etc., to ensure accurate control and safe operation of the whole charging process. Charging cable is generally used in charging station, parking lot, hotel, residential area, garage and other areas, portable charging cable can be placed in the car. Hualin electric vehicle charging cables are designed and produced according to TuV Rheinland technical standards. Hualin Cable's electric vehicle charging cable products have the following advantages: soft, feel good, bending radius is less than 5D; Oil resistance, acid and alkali resistance, water resistance, wear resistance, rolling resistance, cracking resistance, UV resistance, color stability; Good flame retardant performance; Bending resistance more than 50000 times; All materials comply with RoHS&REACH latest environmental standards. Charging cables are generally used in charging stations, parking lots, hotels, residential areas, garages and other areas.
Electrical Submersible Pump Power Cable is divided into round cable and flat cable, the cable consists of conductor,insulating layer, jacket and cable armor. according to the different requirements of power and condition of oil well, there are different specifications of cable. there are 90â??,120â??,150â??,180â??,204â??,232â??and 250â??according to the temperature rating; ther are 3kv and 6 kv according to voltage rating. To prevent it from being damaged, the galvanized steel armor,stainless steel armor or monel armor for corrosive medium.