Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. http://en.hengxingchinese.com/ Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsahttp://en.hengxingchinese.com/
Item: 0.1mm-0.7mm Brassed Coated Sawing Steel Wire for Solar Wafer Cutting Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 Diameter:65um-350um available Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology
Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
The blinds decoration mesh are more adopt excellent stainless steel wire (SUS304\SUS316 Above)as material. The mesh is adopt thin wire fold to steel wire rope random assemble as radial, adopt more thicker after polishing. Stainless steel stick as across warp. Flexible direction as portrait when use it , mostly used in dainty hotel, pub, shopping center,hall pub, residence, workshop and so on. As your requirement.
1. Brass coated steel wire for hose reinforcement Specification: Diameters: 0.20mm to 0.80mm. D cable Yb/t 5343-2006 0.8-1.47 4. Galvanized steel wire Yb/t 5343-2006 0.20-4.40 mm Nat/zbb/zab zaa Spool type: bp 60 (plastic) Packing with 48 / 60 / 72 spools per carton on plywood pallet. Details of weight list is attached in each carton for your check..
Model alloy, 316/304 Special Use Cold Heading Steel Spool Type P3, P5, P10, P20, DIN125, DIN16 Conductivity: Above 20% IACS Weight/Spool: 3~20kg Wire Condition: Hard, Semi-hard, Soft Steel Grade: Stainless Steel Application: EDM Raw Material: Cuzn35, Cuzn37, H62 Tensile strength: >=980N/m2 Alloy Or Not: Is Alloy FOB port tianjin, qingdao Terms of Payment L/C, Western Union, T/T
Copper, Brass & Bronze Wire Mesh Applications: Pharmacy, metal power filtration and separation; ceramic printing and shielding etc. Raw material: Copper Brass: H65, H80, Phorsphor Bronze Csn6.50.4. Weaving Patten: Square mesh, Plain Weave, Twill Weave. Copper Wire Mesh Copper Wire Mesh has a high percent of copper. It is normally used in a corrosion application where brass is not suitable. Phosphor Bronze Wire Mesh Due to its physical properties phosphorous bronze wire mesh is ideal for weaving. It has a wide range of applications including filtration, to screening. Phosphorous Bronze Wire Mesh is stronger than brass and can withstand a great deal of cold working. Brass Wire Mesh This is a non-rusting material and is used in some industrial and architectural applications
Product Description Newest Wire cut EDM brass wire 0.15mm / 980N Brass EDM wire Φ0.1mm~0.3mm Raw Material: Cuzn35, Cuzn37, H62 Wire Diameter: 0.30mm, 0.25mm, 0.20mm, 0.15mm, 0.10mm Wire Condition: Hard, Semi-hard, Soft Tensile Strength: 1000, 900, 500, 450 N/ã??² Conductivity: Above 20% IACS Spool Type: P3, P5, P10, P20, DIN125, DIN160, DIN200 Weight/Spool: 3~20kg Packing: PE film sealed, moisture proof, quake proof, corrosion resistance. Applications: Used on wire-cut machine of Agie, Charmilles, Sodick, Mitsubishi, Makino etc. Features: ¤ Various of wire core material can match demanzds of different wire-cute machine. ¤ Heat treatment technology ensures tensile strength stability, and prevents damage of wire. ¤ Superior verticality suitable for automatic threading. ¤ High drawing precision, fine ovality, low tolerance. ¤ Outstanding wire cutting speed compared, drop less powder.. Our Certifications 1ï¼?Passed ISO9001:2008 quality certificate 2ï¼?Passed ISO/TS16949:2009 certificate 3ï¼?Passed GJB9001A-2001 military quality certificate. 4ï¼?Drafted GJB119.1A-119.4A-2001, GJB107-5110-2002, GB/T5330-2003,HB1862-93 Packing & Transport Packing & Transport of Newest Wire cut EDM brass wire 0.15mm / 980N Packing Details * Water-proof paper inside , outside with bubble wrap. * Carton box * Pallet / Wooden Crate. * Customized packing. Processing & Delivery Time * Common products in 2-4 days. * Special products according to Contract. * Small package is shipped by Air, DHL, FedEx etc. 4-10days. * Big size package is shipped by sea, 10-30days. MOQ * If have stock, any quantity is ok . * If no Stock, please contact the supplier to confirm it. * Payment terms: T/T, L/C , Paypal, West Union etc. * Trade term: EXW/ FOB/ CIF.