Application :- These multi core flexible cables are used for wiring in control panels, machines and various electrical installations in dry and damp interiors specially under typical industrial environmental conditions. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables offer low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from oils, greases and various chemicals and abrasions, thereby giving long life and electrical safety. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 4.00 Sq. mm in 2 core to 19 cores & 6.00 to 120.00 Sq. mm in 3 core and 4 core. Color Codes : Black and Grey Outer Sheath 2 Core Cables - Red, Black 3 Core Cables - Red, Black & Green (for Earth) 4 Core Cables - Red, Yellow, Blue & Green (for Earth) 5 Core Cables - Red, Yellow, Blue, Black & Grey Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
Application :- The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core. Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:1554 (Part-1) Packing : 500 / 1000 meters on drums
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
Application :- These single core flexible cables are used for wiring in control panels, machines and various electrical installations In small, medium and large industries. Features :- Manufactured from bright annealed 99.97% pure bare copper conductors, these cables have low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids, etc. and are tough to protect from any mechanical abuses. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C Sizes : 0.50 to 50.00 Sq. mm with ISI mark & 70.0 to 40.0 Sq. mm generally conforming to IS:694 Color Codes : Red, Yellow, Blue, Black, Grey, White, Pink, Green, Violet, Brown, Orange Specification : IS:694 Packing : In 90 meter coils, higher sizes in drums.
We are suppllier for Bare Core, currently focussing to supply within Indonesia but welcome from worldwide. 13X1220X2440 (Invoice) 13.2X1260X2490 (Actual) Grade A
Albasia barecore 13x1220x2440 10,5x1220x2440
The Characteristics of Uty Grade : sanded one side only thatâ??s why this grade is not very smooth (only one side is smooth), core gaps, big patches and discoloration exist in the back, cheap price, suitable for construction and packaging). Indonesian Core: Albasia Falcata
barecore albasia from grade A, B & C with the following sizes in Centimeters (CM): (length x width): (i)91,5 x 183,(ii) 91.5 x 213,(iii) 122 x 183, (iv)122 x 213 and (v) 122 x 244 (Thickness) customizable from 7 cm - 40 cm
Size : 18 mm x 1220 mm x 2440 mm Grade : BBCC Quantity : 1'HC (60 m3)
Panel size (Thickness): 25mm �± 0.2 mm, panel size (Width): 1220mm �± 30mm, panel size (Length): 2440mm �± 40mm, Pitch Width: 36mm â?? 45mm (Max pitch width 45mm), Pitch minimum length: 150mm, Pitch maximum length: 500mm, 2 Outer Edges Strips: Must use finger joint strips (Inside/other use butt joint construction), Sound knot: Allowed (Max 3mm), Dead knot: Allowed (Max 3mm), Hole knot: Not allowed, Putty: Allowed (Clear and smooth sanding), Discolouration: Allowed, Blue stain: Allowed (Smooth), MC: 10%, ± 2%.
Barecore is one of the main product that is produced out of Albasia Falcata (Sengon) in Indonesia. The bare core board consists of dull glued pieces with a finger jointed frame. Standard sizes are produced referred to the domiciles standards. The main export destination is China and other Asian countries
3 Core & 4 Core Submersible Flat & Round Cables CONDUCTOR: Bunched flexible EC grade bright annealed bare, copper conductor according to international standards like IS 8130, BS 6360, IEC 228 & VDE 0295. INSULATION: PVC Compound resistant to water, oils, grease etc. SHEATH: Flexible PVC sheath with high abrasion resistance APPLICATION: With submersible pumps in a deep well and irrigation equipment, Drinking Water Supply, Dewatering applications, Swimming Pools, Fountains, Offshore Drilling Rigs SPECIAL FEATURES: Generally Conforming to : CENELEC HD 21, IEC 60227, BS 6500, DIN VDE 0281, IS 694, Excellent resistant to moisture, abrasion, grease, oil. Excellent mechanical & electrical properties, Temperature range -15C to +70C
Bare Core Plywood (Matply) is made of high quality tropical hardwood with varieties of glues & very skill workers under special requests from clients for difference purposes: Furniture/ construction BARE CORE PLYWOOD â?? MATPLY Sizes Dimensions 1246 - 2460 mm Thickness 12| 13| 17| 18 mm Materials Face /Back: well smooth sanded top and bottom layer Wood Species Mixed Hardwood: Acacia, Eucalyptus, Pine Core Grade AB| AA Grade Glue Type: Phenolic| WBP Melamine | E0| E1| E2 Performance Application Formwork| Furniture Moisture Content 8-12% Density 605kg/m3
Grading Rules : Panel Size (Thickness)13mm & 10.5mm 0.3 mm Panel Size (Lenght) 2480mm (Inv 2440mm) No Minus, max + 5 mm Panel Size (Widht) 1250mm (Inv 1220mm) 3 mm Pitch Widht 36mm - 45mm Pitch Minimum Length150mm Pitch Maximum Length500mm 2 Outer Edges Strips Finger Joint Strips Inside/Other Use Butt Joint Sound knot Allowed Dead knot Allowed Max 3mm Hole knot Not Allowed Putty Smear Allowed Clear and Smooth sanding Discolouration Allowed Blue Stain Allowed Smooth MC 10% 2% Wood Species Albasia (Albizia Falcataria)
Cable Standard IS 694:2010, BS 6500 Silent Features - High Flexibility - Excellent resistant to moisture, abrasion, grace, oil - Long Life - Excellent mechanical & electrical properties Technical Data Working Temp : Max.+70�°C Nominal Voltage : 1.1 KV Test Voltage : 3.0 KV Min. Bending Radius : 6 x Cable Diameter Standard Packing Coils 100, 200, 300 , 500, 1000m. Conductor Flexible Bare or Tinned Bunch Copper as per IS:8130-1984 Insulation PVC as per IS:5831-1984 Sheath PVC as per IS:5831-1984 Core Color As per IS 694 : 2010 2 Core â?? Red & Black 3 Core â?? Red, Black, Green or Red, Yellow and Blue 4 Core - Red, Yellow, Blue and Green or Black Application Ideal For industrial induction motor, power tools, electrical machinery etc.
Cable Standard BS:5308 (172) IEC 189 (1&2) Silent Features - Wear & Tear Resistance - Long Life - Easy to Cable Slitting - Fire Resistance Technical Data Working Temp : 70C / 90C / 105C as per Insulation Nominal Voltage : 300/500 V Application To Transmit signals from Field Instruments to Control Penal with No. disturbance. A.C. drive application Standard Packing Coils 100, 200, 500 & 1000m Conductor Annealed Plain Bare Copper or Tinned Copper As per IEC 60228 Insulation PVC/ XLPE/ PE/ LSZH/ EPR Sheath PVC/ Rubber/ LSZH/ FRLS Type Armoured or Unarmoured. Elements Insulated core/Pairs / Tried / Quads Color / multi core cable number marking on core Shield Aluminum mylar tape screen with tinned copper drain wire individual shielding or Overall Shielding Braiding Tinned copper braiding as per requirement Application To Transmit signals from Field Instruments to Control Penal with No. disturbance. A.C. drive application