Cement, clinker , refractories , oil / petroleum products , scrap , steel products , corn wheat , barley , chicken meat , beef meat , manganese , dried fruits , fresh fruits and vegetables , feldspar.
Hematite pig iron, semi-nodualr pig iron, nodular pig iron, basic pig iron, foundry pig iron, steel billets, HR / CR steel, sod ash, glycerine, oliec acid, soap, noodles, crude palm oils, stearic acid, vegetable oils, soild fuel.
Soda ash light, soda ash dense, LABSA, LAB, phosphoric acid, corn starch, sodium bicarbonate, potassium carbonate, sodium silicate, glycerin, white oil, furnace oil, white spirit, zeolite, STPP, TSP, titanium dioxide, SLES, SHMP.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
OAK LOGS Quality: Origin : Serbia Grade K , I, II , diameter 35cm +, 32-34cm 5%, Fresh cut Leght: 2,2m + Measurements: Diameter are measured in the middle of the logs amd over bank minus 2cm. Volume is measured based on the formula : V(m3)= 3.1415*D/2*D/2*L V= volume m3 D= diameter measured in the middle of logs L= net leght(m)
Fly ash is used: In the production of lightweight concrete. Low-cement concrete is used in the preparation of road bases. Fly ash is also used in slag-silicate concretes, which are used to repair roads, airfields, bridges, as well as in the construction of acid-resistant floors in chemical plants, livestock farms, and metallurgical facilities. In the production of foam concrete, its introduction into the foam concrete mixture increases the aggregate stability of the mixture between the beginning and end of the cement dough setting, which prevents the movement of components and prevents negative effects on the formation of the structure. Fly ash easily replaces cement in the production of mortars, ready-mixed concrete, and finished products. It is used as an additive to cement without reducing its activity, is used in the preparation of concrete for road construction, and as an additive to clay in the manufacture of tiles and bricks. As a component of dry construction mixes: production of dry masonry mixes consisting of cement, sand, fly ash, ICP, and powdered superplasticizer.
Chemical Composition SiO2 57,9 ; 5,0% AL2O3 35,8 ; 3,0% Fe2O3 1,5 ; 0,3% CaO 1,1 ; 0,2% MgO 1,6 ; 0,2% SO2/SO3 0,6 ; 0,3% K2O + Na2O 1,2 ; 0,4% TiO2 0,8 ; 0,3% Cl 0,2 ; 0,1%
Microsphere cenospheres in thermal insulation coating with powder shape from the coal ash, cementing well
The microspheres are a waste material arising in the process of combustion of hard coal. The product is made of spheres with a diameter of 10-800 microns, filled with gas, mostly CO2 and NO2. Sheaths of the spheres are 0.2-3 microns thick, what makes the microspheres have a great volume at a relatively low gravity. Material contains mainly: silicon oxide (SiO2), aluminum oxide (Al2O3), magnesium oxide (MgO), iron trioxide (Fe2O3), potassium oxide (K2O), calcium oxide (CaO) and vestigial admixtures of other metals. Chemical Composition SiO2 57,9 ± 5,0% AL2O3 35,8 ± 2,0% Fe2O3 1,5 ± 0,3% CaO 1,1 ± 0,2% MgO 1,6 ± 0,2% SO2/SO3 0,6 ± 0,3% K2O + Na2O 1,2 ± 0,4% TiO2 0,8 ± 0,3% Cl 0,2 ± 0,1%
Copper sulphate, zinc sulphate, aluminium sulphate, magnesium sulphate, zinc oxide, koh, sodium silicate glass, liquid sodium glass, soda ash, sodium bicarbonate, acetic acid, n-butyl acetate, acetone, aluminium secondary alloys, aluminium bars and rods, bronze ingots, activated carbon, hopcalite, protection masks cartridges, selenium metal.
Sodium hydroxide uses: Food industry Adhesives and sealant chemicals Adsorbents and absorbents Agricultural chemicals (non-pesticidal) Anti-adhesive agents Bleaching agents CBI Corrosion inhibitors and anti-scaling agents Dyes Finishing agents Fuels and fuel additives Functional fluids (closed systems) Intermediates also Ion exchange agents Laboratory chemicals Oxidizing/reducing agents Paint additives also coating additives not described by other categories Plasticizers Plating agents and surface treating agents Processing aids, not otherwise listed
Brand: Caustic Soda 98% 1, Industrial Grade, solid, pearl and flake Scientific name: Sodium Hydroxide Chemical formula: Na-OH Melting point: 1390 C Density: 2.13 The molecular weight of caustic soda: 01/40 The melting point of interest: 12 C Spot boiling point: 140 C Relative density of percolation: 53.1% (50% solution), 2 at 5.5 C (solution 73% -70%) Peroxide solubility in water: 109 g / 100 ml at 20 C Highly soluble in water, alcohol, glycerin, and methanol
Soda ash dense (coo is turkey), marble, travertine, stone, plastic & paper packing materials, clothes, home textile, pp bags, backpack, aluminum, tomato paste, energy drink, margarine, fresh vegetables, green sweet pepper, red sweet pepper, onion, patato, fresh fruit, grape, apple, orange, tangerine, pomagranate, date, margarine, butter, reinforced hand held, soft handle bag, mailing bag, t shirt bag, garbage bag, industrial garbage bag, Soda Ash Dense , roll up shrink, pallet bags, banded or without tape bags,chicken plastic bag, cpp & opp bag,warning tape, car floor mats.
- Liquid caustic soda : Sodium hydroxide is used in many industries in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents and as a drain cleaner. - Caustic soda flakes : wide range of applications in various chemical productions, paper & pulp , petrochemical industries, detergents and soaps.
1)industrial grade caustic soda flakes 2)99%min 3)delivery time: 14 days 4)packing:25kg pp+pe bags 5)high quality&good price basic information of caustic soda: name: caustic soda another name: sodium hydroxide mf:naoh einecs: 215-185-5 cas:1310-73-2 hs:2815110000 purity: caustic soda flakes 96%&99% caustic soda pearls 99%min.
Sugar icumsa 45, crude degummed vegetable oils, soybean, soybean meal, rbd palm oil, rbd palm oilen, pig iron, hbi, dri, steel billets, flat products, tin mill plate, ferro alloys, iron ores, ferrous scraps, cement, slag, metallurgical coal and steam coal..Exporters and traders
Name: Caustic Soda CAS No: 1310-73-2 Formula: NaOH Other Name: Sodium Hydroxide Category: Inorganic Products HS Code: 28151110 Caustic Soda Flake 99% Caustic Soda Flake or (Sodium hydroxide) is produced commercially by two basic methods: electrolytic cells and chemical process. Production Process of Caustic Soda Caustic soda is produced by reacting sodium carbonate (Na2CO3) with hydrated lime (Ca[OH]2) to form sodium hydroxide (NaOH) and calcium carbonate (CaCO3).
Caustic soda flakes (sodium hydroxide flakes) are flakes in white color which are hygroscopic and soluble in water. Caustic soda flakes are obtained by evaporating of qualified liquid caustic soda which is produced with membrane technology. Analiz NaOH 99.16 %W Carbonate as Na2CO3 0.43 %W Chloride as NaCl 0.06 %W Sulfate as Na2SO4 0.0047 %W Silicate as SiO2 0.0019 %W Fe 12.5 mg/Kg Insoluble in water 0 %W Aluminum as Al2O3