Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package. These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants. The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant. Applications and Compressor Type Propylene Refrigeration Oil-flooded rotary screw compressors Liquid ring vacuum pumps Other applications requiring an oxidative and thermally resistant lubricant Features and Benefits Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems Oxidatively stable Longer system life Low volatility Reduced maintenance, reduced top-up High viscosity index Wide temperature range of operation Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1516 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to ensure shear stability, corrosion protection, and excellent lubricity. These compressor lubricants feature excellent protection against yellow metal staining by careful selection of a combination of corrosion inhibitors. This, coupled with unparalleled oxidative and thermal stability ensures that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI -1516 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and high viscosity index means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Propane refridgeration Features and Benefits Corrosion protection (yellow metals) Enhanced system reliability and reduced down-time Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased effi ciency, reduced cost of operation High viscosity index Satisfactory use over wide range of operational temperatures
The CPI -1515 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulphide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1515 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service intervals. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Sour gas applications Heavy hydrocarbon gas stream applications Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
Spray Paint Designed for numerous application possibilities. Special spray system, which is even used by famous graffiti artists. Available in a broad range of the bestselling colours, mainly matching to RAL. High-grade nitro-combi quality. Very good coverage. Excellent adhesion on many surfaces. Good flow, smooth surface. Quickdrying. Suitable for indoor and outdoor applications. The surface is polishable. Weather-resistant, light-proof, UV-resistant. Scratch-, shock- and impact-resistant. Quick-drying (The drying time depends on surrounding temperature, air humidity and thickness of the applied coat).
2,400 10l jars (15.5kg) 37,200 kg (620 Kg / pal) 60 pallets / 40 pots per pallet. 0,70 / kg 26 040 euros Interior / exterior water-based paint Product label in German language EXW (Belgium) Mandatory export outside Europe Extra strong coverage, very easy to paint Toom's high-quality Comfort White impresses with its extra strong coverage and is ideal for interior painting jobs. Emulsion paint is very easy to work with and gives walls or ceilings a matte appearance after drying. It is available in different packaging sizes and certified by "Der Blaue Engel" and "Pro Planet". The paint bucket is also made from 100% recycled material.
Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery
Another name - ethyl alcohol, alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc
Another name - ethyl alcohol,alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc
Weatherproof acrylic paint for exterior and interior works. It is intended for painting of facades of houses, wearproof and moisture resistant coverings. Has good adhesion and high hiding power. Suitable for painting cement and gypsum bases, silicate and ceramic bricks, concrete, facade insulation systems, fiberboard, particleboard, QSB and OSB, wood and wallpaper indoors. Resistant to atmospheric factors. Vapor permeable.
Weatherproof acrylic facade paint for exterior and interior works. Forms a durable coating. It is intended for painting of facades of houses. It has good adhesion and high hiding power. Means for porcelain of cement and clay bases, silicate and ceramic bricks, concrete, systems of thermal insulation of facades, DVP, a chipboard, QSB and OSB, a tree and wall-paper indoors. Vapor permeable.
Acrylic facade paint for tinting on tinting equipment in saturated bright shades according to the Color Mix system according to the palette of MD COLOR, RAL, NCS, and others. Used only toned! It is intended for painting of facades, and also creation of wearproof coverings indoors. Forms a water-repellent, moisture-resistant, elastic and durable coating. Resistant to wet abrasion. It is used for painting of cement plaster, concrete, a brick, surfaces of systems of thermal insulation of facades, and also gypsum cardboard, DVP, a chipboard, QSB and OSB, plywood, a tree and wall-paper indoors. Compatible with pigments from most European manufacturers. Does not contain solvents. Vapor permeable.
Silicone facade paint with high water resistance and vapor permeability. Provides excellent long-term operation of a facade, has high mechanical stability. It is intended for painting in places with aggressive influence of environment on facades warmed by mineral wool. Has good adhesion and high hiding power. Suitable for painting cement and gypsum bases, silicate and ceramic bricks, concrete, facade insulation systems, fiberboard, particleboard, QSB and OSB, wood.
Silicone facade paint with high weather resistance and vapor permeability. Provides cancellation of long-term operation of a facade, gives to a surface dust-repellent and hydrophobic qualities. It is intended for painting in places with aggressive influence of environment and on facades warmed by mineral wool. Has good adhesion and high hiding power. Suitable for painting cement and gypsum bases, silicate and ceramic bricks, concrete, facade insulation systems, fiberboard, particleboard, QSB and OSB, wood.
Two Component Polyurethane Based Matt Varnish PRODUCT DESCRIPTION Product type Polyurethane Brightness 40-45 gloss ± 5 Volume Solids (%) 57 ± 1 Solid Matter by Weight (%) 60 ± 1 Theoretical Coverage (m / kg) 10-12 dry film thickness 30-35 POT LIFE SA (20 C) 5 Density (g / cm) 0.93 + - 0.03 Powder drying, Touch drying, Stacking dry (20 �ºC / minute) 20-30 minutes-50-70 minutes-24-30 hours Full Curing 24 hours (20C) Mixing Ratio P.V.1541-07 1.KOMPENANT 100 parts (By Weight) P.V.S.07 2.KOMPENANT 25 parts (By Weight) Application Thinner Universal acrylic polyurethane thinner 35-40 parts Application Tools Spray gun Airmix Spray, Roller Color Transparent
TWO COMPONENT ACRYLIC BASED MATTE VARNISH PRODUCT DESCRIPTION Product type ACRYLIC Gloss 20-25 gloss �± 5 Solid Matter by Volume (%) 55 �± 1 Solid Matter by Weight (%) 56 �± 1 Theoretical Coverage (m�² / kg) Recommended application amount (6-7.5 dry film thickness 30-35�µ) 100-120 g for one layer POT LIFE SA (20 �ºC) 24 Density (g / cm�³) 0.99 + - 0.03 Powder drying, Touch drying, Stacking dry (20 �ºC / minute) 10-15 minutes-30-40 minutes-18-20 hours Full Curing 24 hours (20�ºC) Mixing Ratio A.V.W-1020 1.KOMPENANT 100 parts (By Weight) A.S.W-01032 2.KOMPENANT 20 parts (By Weight) Application Thinner Universal acrylic polyurethane thinner 70-80 parts Application Tools Spray gun Airmix Spray, Roller Color Transparent