Aviation Kerosene Jet Fuel A-1/TS-1 Kerosene (Gost 10227-86) Quantity: 750,000 Bbls Spot and 2,000,000 Bbls X 12 Months with r/e-60 Months Price: $48/$45 Net Origin: Russian Loading Port: FOB Rotterdam Delivery Port: FOB Rotterdam Shipping Time: Immediately Spot Liftable Payment: MT103/TT Wire Transfer for first immediate liftable. While contract shall be by Non-Operative SBLC TRANSACTION DELIVERY TERM FOR Tanker Take Over TTO ASWP 1. Buyer issues Irrevocable Corporate Purchase Order ICPO containing full banking information with Seller procedures. 2. Seller issue the Tanker Take Over Contract for review by the buyer. 3. Buyerâ??s bank release to Sellerâ??s Bank RWA via SWIFT MT799. 4. Buyer send to Seller signed contract. 5. Seller issues to Buyer the Partial Proof of Product and Shipping documents as follows: a) Company Registration License b) Export License c) Refinery Confirmation Letter to supply the product (s) d) Product Passport and Q&Q done by indigenous lab e) Certificate of Origin from Chamber of Commerce & Industry f) Bill of Lading g) Vessel Q88 6. Upon receipt and confirmation of the above documents by Buyer, Buyer release payment instrument SBLC via MT760 non operative to the Refinery Nominated Account for the value of shipment. 7. Upon receipt and confirmation of the above financial instrument, Seller issued PB 2% operative. 8. All parties sign NCNDA/IMFPA. 9. Seller issues the ACT of TRANSFER in Buyers Name, Title of Ownership Certificate to be followed by all Export Documentation will be sent to the Buyer alongside the SGS Report at the loading port. 10. Upon arrival of the vessel at discharge port, the vessel captain will hand over all the original POP documents to the buyerâ??s representative while Buyer pays for the total contract after SGS, CIQ or equivalent inspection at the discharge port via MT103 - T/T Wire transfer for the total of shipment value. 11. Seller pays Commission to all involved mandates and intermediaries by T/T Wire Transfer as mutually agreed.
QQ :2851195456 Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Avaya G700 VoIP Media Gate Switch Gateway Module System 700394984 NO POWER PARTS Alcon 20000 Legacy Eye Surgery Phaco Machine Phacoemulsifier Aspirator PARTS 3COM Total Control 1000 Multiservice Access Platform Router Chassis +ARC MMC DSP
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
QQ :2851195456 Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM