NLB-300 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. High power petrol engine ensure large torque and high working efficiency. Specification Model NLB-300 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm)1300*510*760mm Main shaft rpm 780r/min Max. loosen torque 300 Nm Max. fasten torque 150 Nm Working efficiency 10 pieces/min Petrol engine 1) Model: GX160 (2) Rated power: 4Kw (3) RPM: 3600r/min Weight 60kg
Size;600*600mm Resflor Introduction of Products Advanced technology, imported high quality chipboard base material or MDF base material tile could be HPL or PVC ceramics (granite), Four sides: conductive regular. Bottom panel: aluminum foi or galvanized steel, Stringer: pressure forming and or conductive gum cover, lead screw could adjust height. Characteristics 1.Strong wearability, non-bubble, no degumming 2.Strong design ability, pressurization, good loading capacity; 3.Appearance is beautiful; 4.Easy to fix, convenient for wires.
Origin from Hubei, China Type railway engine Material Stainless steel Device size 800mm x 560mm x 500 mm Linkage Type: Rail cutting machine Apply track maintenance work Engine model: GX270 Fuel injection 5.1KW Specification Cutting disc: 400*32 * 4 mm cm Cutting disc no. RPM: 3320 RPM/min Linear speed cutting sheet: 70 m/s Cutting accuracy: Verticality 0.4mm, flatness 0.3mm Cutting time: 2 min (cut 60kg /m rail) Warranty: 1 year
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification item NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
Product Details: Available Core Cross-Section Range: 0.2- 25 mm2 Conduit Diameter: �?15mm Cutting Length: 1 ~ 15000mm Stripping Length: Head 0~60mm, End 0~40mm Twisting Way: Both sides or one side Max. Middle Stripping Section: 13 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 2000~3000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 220W
Product Details: Available Core Cross-Section Range: 0.1 - 4.5mm2 Conduit Diameter: �¦8.0mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~60mm, End 0~40mm Max. Middle Stripping Section: 13 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
Rice husk ash is used in the production of special high-quality steel with low thermal conductivity and density. ZRSH is added to the heat-insulating mixture to cover the mirror of the metallurgical ladle, which additionally ensures compliance with the temperature regime of continuous casting processes. Ash is used as a filler in polymers and rubbers for the production of car tires, as an adsorbent for heavy metals for wastewater treatment. In the pharmaceutical industry, ash is added to stabilize emulsions, as an agent, thickener and suspending gel in the preparation of semi-solid products, in perfumery, RHA is added as a filler for toothpastes and creams. Equally important is the use of rice husk ash as a natural source of high performance amorphous silica.
In-Factory Production Allows continuous technical developments, maintains a high-quality level Premium Material Selection: ONLY use 20CrMo steel for cylinders, and other major components, all under the close quality test. Precision Manufacture: Essential Components are Manufactured by Computerized Automatic Machinery from Korea (Doosan CNC Machineries) Ensure Major Components Standardized Tolerance and Clearance. Heat Treatment: Major Components are all under heat treatment by our own facilities in our factories Before Delivery Test: All breakers are tested according to the ISO quality control system before delivery
Portable Rail Vertical Tamper a special small track maintenance machine for tamping ballast uinder sleepers. Because of its light weight, it can be on and off the track at the same time with the operator. Therefore, the interval between trains can be used for ballast tamping. It is suitable for the maintenance and tamping operation of main line and tumout. SPECIFICATION Model ND-22 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 1077mm 448mm 362mm Engine G5LS Two-stroke petrol Power 2.2 KW Impact frequency 128Hz 138Hz Exciting force 5500N Weight 19 Kg
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) 40*15cm Weight 2kg
Switch Rail Clamp Scope of use of portable hook lock: 1. Lock switch when repairing switch signal switch machine. 2. Lock the switch when passing the special train. 3. When temporary power failure occurs, the train runs and locks the switch. 4. Closed special line lock special line turnout. 5. Line new switch lock new open switch open. 6. Lock the switch during the construction of the special line. Specification Model LJ-GSQ Type Switch Rail Clamp Material Stainless Steel Dimensions (L x W x H) (40*15cm Weight 2kg
NLB-500 railway construction rail fastener wrench is used for tightening and loosening sleeper bolts, hook-bolt nuts, etc. With two stroke petrol engine and 18kg lightweight can achieve easily vertical and horizontal wrenching tasks. Specification item NLB-500 Type Rail Impact Wrench Material Stainless Steel Dimensions (L x W x H) 830*280*380 mm Engine 2 stroke, Single cylinder, Air cooling RPM 7500r/min Power 1.42kw Spindle RPM 800r/min Rated torque 500N.m Peak torque 1000N.m Weight 18kg
This hydraulic rail bending machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems Model FMG-2.2 Working Pressure 47 MPa Max. bending force 900 kN working stroke 120 mm Pivot point distance 1200mm Machine size 1435x696x 385 mm Weight 80kg
Digital Switch Rail Lateral Wear Gauge The Switch Rail Lateral Wear is used to measure the switch rail lateral wear and the descent height value of the switch rail this device can be used for all types of switch rail BENEFITS Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracyeasy to operatehigh reliabilitysmall volumelight weight etc Specification Model LJJGCMI Type Switch Rail Lateral Wear Gauge Material Stainless Steel Dimensions L x W x H 315190200 mm Vertical wear measure range 92193mm Lateral wear measure range 0120mm Resolution 001mm Indication error 0 15mm
Digital Rail Frog Wear Gauge Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sectionsAlso could be used for measuring decrease value of point rail relative to wing rail Specification Model LJZCMA Type Digital Rail Frog Wear Gauge Material Stainless Steel Dimensions L x W x H 38016625mm Measure range 040mm Score value 001mm Indication error 0 15mm Working tempareture 1040 Main ruler measure range 0380mm
Ferro silicon is a ferro silicon alloy made from coke, steel scraps, and quartz (or silica) smelted in an electric furnace. Used as a deoxidizer and alloying agent in the steelmaking industry. Used as an inoculant and spheroidizing agent in the cast iron industry. Adding a certain amount of ferro silicon in the iron casting process can prevent the formation of carbides in the iron and promote the precipitation and spheroidization of graphite. Ferro silicon75( Fesi75) is the main raw material for the production of magnesium, and the consumption per ton is about 1.1 tons. The ground or atomized ferrosilicon powder can be used as a suspended phase in the beneficiation industry, and can be used as a coating for welding rods in the welding rod manufacturing industry.
Industrial Gantry type CNC plasma cutting machine with flame/gas torch is designed for sheet metal and tube fabrication. This industrial plasma cutter has gantry structure with double-driving system, All equipped with reducer transmission mode, more powerful. Its working size can be customized upon requirements. It can be used for cutting carbon steel, stainless steel and non-ferrous metal in any 2D graphics.. Plasma cutting for 0-30mm iron/steel, flame/gas cutting for 10-200mm iron/steel. Features of Industrial Gantry type CNC plasma cutting machine: 1. Two cutting ways optional: plasma cutting and (gas) flame cutting. 2. It can be applied to thick metal materials or non-ferrous metal cutting of enterprises. 0-200mm cutting. 3. Flexible, easy to operate, can moves can be cut, Using USB Flash Drive reading procedure and timely upgrade any time, and do not occupy fixed sites. 4. This machine uses 200A HUAYUAN water-cooled power supply, and its cooling effect is much better than air cooling. 5. STARFIRE control system, the file incision and export automatic correction , real-time tracking detection of plasma power in the process of cutting current. The control system uses the U-disk exchange processing document, easy to operate. English interface and other 5 languages:Russian, Spanish, French, Japanese, Czech, Slovak Parameters of Industrial Gantry type CNC plasma cutting machine: Model RB3000, RB4000 Effective Cutting Width (X axis) 2200mm, 3200mm Effective Cutting Width (Y axis) 6000mm Cross Beam Length 4000mm Longitudinal Rail Length 7500mm Cutting Speed 0-10000mm per minute Plasma power 63A, 120A, 200A Plasma Cutting Thickness 0-30mm Gas/Flame Cutting Thickness 10-200mm Drive Mode Bilateral drive Cutting Mode Gas (flame) /plasma cut metal Cutting Gas Acetylene/Propane Plasma Air Only pressed Air Plasma Air Pressure Max. 0.8Mpa Cutting precision �±0.5mm National standard JB/T10045.3-99 Working Temperature -10�°C-60�°C. Relative Humidity, 0-95%.
BLOWING MOLD WITH RATTAN LOOK Table for Garden house Table size: 180 x 75 x 72 cm Table top: 4.3cm Folding size: 90 x 75 x 8.6 cm Power coating steel tube: Dia. 25 x 1.0mm Packing: 200LBS master ctn, inner 4 sides with 4cm thickness polyfoam Carton size: 85.5 x 9.5 x 101.5 cm Qty/Ctn: 1pc N.W./G.W.: 11.50kg/13.50kg 20 GP/40 GP/40 HQ: 335pcs/705pcs/820pcs
Product Details: Available Core Cross-Section Range: 0.1 - 2.5 mm2 Conduit Diameter: 6mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~35mm, End 0~50mm Twisting Way: Both sides or one side Twisting Length: 1 ~ 99mm Max. Middle Stripping Section: 3 Cutting Tolerance: ±(0.002 L) (L=Cutting Length) Speed: 4000~10000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz Power Rating: 220W
Feature: Available Core Cross-Section Range: 0.1 - 6.0mm2 Max. Conduit Diameter: 10.0mm Cutting Length: 1 ~ 9999mm Stripping Length: Head 0~30mm, End 0~15mm Max. Middle Stripping Section: 13 Motor Step Angle Accuracy: 3-phase 6 shot 1.5/3 Cutting Tolerance: �±(0.002�?L) (L=Cutting Length) Speed: 3000~8000pcs/hour Display Way: English LCD dispaly Drive Mode: 4 Drives Blade Material: Hard tungsten steel Appropriate Wire: PVC, Teflon, glass wire Power Supply: 220V/50Hz 110V/60Hz Power Rating: 220W
