Solar crimping tool crimping mc4 connectors: 1.Suitable for cables with cross sections 2.5mm2, 4mm2 and 6mm2. 2.Can be used for riveting lathing pins or stamping pins. 3.Applicable for a small quantity of PV cable and terminals.
1500Vdc Fuse Holder Product Specifications: Insulation material:PA; Flame class:UL94-V0; Rated current:50A; Ambient temperature range:-40~+85(IEC); Rated voltage:1500VDC; Suitable cable cross sections:1.5~16mm2 /16~16AWG; Test voltage:AC3kV(50Hz,Imin); Connecting system:Crimp connection; Contact resistance:=500Vdc/1000; Rail spec.:TH35.
1500VDC PV4.0 Branch Connector 2 In 1 Product Specifications: Insulation material:PPE; Safety degree:II; Rated current:35A; Flame class:UL94-V0; Rated voltage:1500VDC; Ambient temperature range:-40~+85(IEC); Test voltage:8kV(50Hz,Imin); Suitable cable cross sections:2.5~6mm2 /14~8AWG; Contact resistance:
PV4.0 1500VDC Panel Connector Standard Type Product Specifications: Insulation material:PPE/PA; Safety degree:II; Rated current:35A; Flame class:UL94-V0; Rated voltage:1500VDC; Ambient temperature range:-40~+85(IEC); Test voltage:8kV(50Hz,Imin); Suitable cable cross sections:2.5~6mm2 /14~10AWG; Contact resistance:
Outdoors Illumination of buildings and structures not only accentuates its unique features but also sets the structure apart from its surroundings. LED Projection Lights and Wall Washers offer a perfect replacement with its lower power consumption, various Wattage, Lighting Angle and Color options. Combined with DMX control, Lighting desing options are various. An IP65 body makes it perfect for outdoor installations. Outdoors Illumination of buildings and structures not only accentuates its unique features but also sets the structure apart from its surroundings.
4 Rails Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:14A(Diode 25A); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP67;Safety degree:II; Flame Class:UL94-V0;Diode Number:Each 1PC; Ambient temperature range:40 85 (IEC); Upper limiting temperature:110 (IEC); Suitable cable cross sections:2.5-6mm2 (14-10AWG); Range of cable gland(mm):O.D.:4.8-6.2; Ribbons size(mm):6(W) 0.2-0.4(T);Connection of bus ribbons:Clamp.
Glass To Glass Edge Connector Product Specifications: Insulation material:PA/CU;Rated voltage:1000V&1500VDC; Rated Impulse voltage:16KV;Test voltage:8kV(50Hz,1min); Contact resistance:�¢?�¤ 0.25 m ;Contact material:Copper,Tin plated; Degree of protection:IP68(In potting);Overvoltage category/Pollution degree:CATIII/2; Safety degree:II;Flame class:UL94-V0;Installation type:Outdoor,UV resistant(F1); Ambient temperature range:-40 85 (IEC);Suitable cable cross sections:2.5 4mm2/14~12AWG;Connecting system:Soldering; Upper limiting temperature:110 (IEC);Reference standard:TUV/CE(IEC62852:2014).
PV-NEHP01 Junction Box Product Specifications: BOX Material:PPE/PA;Rated current:30A(With diode); Rated voltage:1500VDC;Test voltage:8kV(50Hz,Imin); Contact resistance: 0.25m ;Contact material:Copper, tin plated; Degree of protection:IP68(in potting);Safety degree:II; Flame Class:UL94-V0;Ambient temperature range:-40 85 (IEC); Suitable cable cross sections:6mm2 (10AWG);Diode Number:Each 1PC; Upper limiting temperature:110 (IEC);Range of cable gland(mm):O.D.:6.0; Ribbons size(mm):Max.8(W) 0.2-0.5(T);Connection of bus ribbons:Soldering.
PV 2 to1 YH Type Cable Harness with inline fuse 1500VDC Product Specifications Insulation material:PPE/TPE/PA Rated voltage:1500VDC Rated Impulse voltage:12KV Test voltage:8kV(50Hz,Imin) Contact resistance: 0.25m Contact material: Copper,Tin plated Degree of protection:IP68(1m,1H) Overvoltage category/Pollution degree:CATIII/2 Regulatory approval:TUV/CE(IEC62852:2014) Safety degree:II Flame class:UL94-V0 Installation type:Outdoor,UV resistant(F1) Ambient temperature range Suitable cable cross sections:1.5~10mm2/16~8AWG Connecting system:Crimp connection
1500VDC PV4.0 Cable Connector Product Specifications: Insulation material: PPE/PA; Safety degree: II; Rated voltage: 1500VDC; Flame class: UL94-V0; Rated Impulse voltage: 12KV; Installation type: Outdoor,UV resistant(F1); Test voltage: 8kV(50Hz,1min); Ambient temperature range: -40~+85; Contact resistance: Suitable cable cross sections:1.5~10mm2/16~8AWG; Contact material: Copper,Tin plated; Connecting system: Crimp connection; Degree of protection: IP68(1m,1H); Nut cap locking force: 1.5-1.8Nm; Overvoltage category/Pollution degree: CATIII/2; Upper limiting temperature: 110 (IEC); Regulatory approval: TUV/CE(IEC62852:2014).
1500VDC PV4.0 Cable Connector Product Specifications: Insulation material: PPE/PA; Safety degree: II; Rated voltage: 1500VDC; Flame class: UL94-V0; Rated Impulse voltage: 12KV; Installation type: Outdoor,UV resistant(F1); Test voltage: 8kV(50Hz,1min); Ambient temperature range: -40~+85; Contact resistance: 0.25; Suitable cable cross sections:1.5~10mm2/16~8AWG; Contact material: Copper,Tin plated; Connecting system: Crimp connection; Degree of protection: IP68(1m,1H); Nut cap locking force: 1.5-1.8Nm; Overvoltage category/Pollution degree: CATIII/2; Upper limiting temperature: 110 (IEC); Regulatory approval: TUV/CE(IEC62852:2014).
Year: 2007 Location: Europe Availability: 1 - 2 months Current condition: In Production Final Product: Food\Fruit\Fruit concentrate Other specs: Complete Plant For Processing And Aseptic Filling Of Natural And Concentrated Fruit Purees And Tomato Puree Produced by Rossi and Catteli S.P.A, Parma, Italy. Capacity up to 20 t/h of fresh fruits Can process seed and stone fruits (peaches, apricot, apples, pears, plums, carrots, strawberries, cherries) and tomatoes The end product can be single strength or concentrated up to 48% Brix SECTION A EXTRACTION 1. Destoning And Depulping Section 2. Cold Extracion, Deactivation And Hot Refining 3. Puree Extraction SECTION B CONCENTRATION Evaporator model VENUS T400 DE CB- two effects Section C Sterilization Sterilizer OLIMPIC TC-XX/AS (110/120gr. C holding time 4 sec.) SECTION D ASEPTIC FILLER Aseptic filler model type MACROPAK TM2000/3 (year 2006) for product packing in 220 or 1500 l sterile bags Three head filler for the aseptic filling of liquid, semi-liquid, high-viscosity, or diced products; the machine is fed with four drums and the relative pre-sterilized bags already placed on the pallet. In the case of 1500 l bags there will be one single bin on the pallet. The machine is equipped with a sophisticated control system for the monitoring of the filling process. Steam barriers controlled by temperature sensors protect all the moving parts the aseptic area
Product Introduction: Cell Checker for rotogravure Engravure machine is Portable Gravure Cylinder Measuring Instrument.Dot Cell checker for cylinder The instrument is the integration of digital imaging technology, optical microscope, micro structure measurement technology and other functions in one portable intelligent test equipment. Product Advantage: 1.Accurate measurement of cylinder engraving pattern size, angle, area. 2.Gravure Cell checker integration design, without connecting with external computer and the power 3.rotogravure engraving cell tester Shooting and storage the built-in memory, convenient for data analysis 4.cell checker Built-in rechargeable battery, small volume, convenient to carry and use on site 5.Dot cell checker for rotogravure cylinder Touch screen remote control operation, a variety of display mode, convenient for different object observation. 6.Built-in a variety of measurement tools: straight line, angle, area, parallel line measurement
STANDARD PDC CUTTER The PDC Cutter produced by the PDC cutter manufacturer combines a polycrystalline diamond layer for hardness and wear resistance with a cemented carbide substrate for strength and impact resistance. Polycrystalline diamond composite, a super hard material, is formed by sintering single-crystal diamond micro powder with binders, typically cobalt or nickel, under high temperatures and pressures. Diamond composites used for drilling are primarily flat, though some specialized shapes include cylindrical or a combination of cylindrical and hemispherical forms. Types Of Standard PDC Cutter PDC Insert Top Tool employs a sophisticated synthesis technique to fabricate PDC Cutters, seamlessly integrating the merits of diamond and cemented carbide. Cambered Face PDC Cutter This type of the PDC cutter is different from the common ones. It has higher impact resistance with its cambered face shape of diamond surface. Conical Shaped PDC Cutter Our conical PDC cutters focus more stress on rocks due to their shape and have a thicker diamond table for better impact strength and wear resistance. In tough drilling conditions, they boost the drill bit's performance and ROP. Domed Shaped PDC Cutters The PDC steel body bit, designed for dome PDC cutters and PCD inserts, offers fast drilling and efficient rock debris clearance with less mud. Ideal for complex hard-layer drilling, its spherical tungsten carbide enhances bond area. The claw-designed interface between PCD and tungsten carbide reduces stress, improving toughness, strength, and longevity. Ridge Shaped PDC Cutter Our organization introduced a ridge-shaped diamond composite sheet with superior abrasion resistance and impact toughness. Its unique inclined surface structure reduces the risk of collapse and stress concentration, making it ideal for coal fields and oil well drills.
ROCK REAMER There is no fixed tooth shape and bearing for the rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure, mainly to prevent the roller falling off after the roller bearing is damaged, resulting in the accident in the hole. The roller reamer is suitable for horizontal directional drilling construction, with high design strength, good wear resistance, long service life and good safety performance. The reaming size is 220~1600mm. Types Of Rock Reamer Roller Cone Reamer It means that the teeth using the roller are milled teeth, that is, the teeth milled out on the matrix of the roller, whose wear resistance is relatively poor. In order to improve its wear resistance, it is often coated with a hard alloy layer. What Are Rock Reamer Made Of? 01 The Structure Of The Rock Reamer Is Shown In The Figure The rock reamer mostly uses the single tooth palm of the cone bit and the cone as one cutting edge, 02 With The Number Of Cutting Edges At Least 3 The cone reamer is composed of a rear centering plate, a rear baffle. 03 A Mandrel A front baffle, a front centering ring, a front centering plate, a cone, and a tooth palm. 04 The Reamer Uses Welding Process To Connect And Fix The Components. In the process of hole reaming, the screw drill provides torque and the drill provides tension. As a drill bit supplier, we will do our best to meet all the needs of customers. If you want to know more types of oem pdc bit, please visit our website.
OST Photonics offers various functional crystal materials for laser systems, optical equipment and instruments. Crystals are divided into six types according to their functions: laser crystals (diffusion bonding crystals, Nd:YAG, Er:YAG, Yb:YAG, CTH:YAG, Nd:Ce:YAG, Nd:YVO4, Nd:GdVO4, Nd:YLF, Pr:YLF, Ho:YLF, Tm:YLF, Ti:Sapphire, Er:Yb: Glass), nonlinear crystals (KDP & DKDP), KTP, LiNbO3, LBO, BBO, BIBO), passive Q-switch crystals (Cr4+:YAG, Co2+:MgAl2O4), birefringent crystals (YVO4, �±-BBO), Magneto-optic Crystals (TGG) and optical crystals (BaF2, CaF2, MgF2, LiF, Germanium single crystal, Sapphire (Al2O3), YAG, ZnSe, Silicon single crystal, ZnS). If you want to know more about our functional crystals, please do not hesitate to contact OST Photonics. What are Functional Crystals? A wide range of functional crystal materials is used in various optical applications. While optical glass is commonly used as a transparent material, different functional crystal materials, primarily monocrystalline materials, are required for diverse applications due to their unique functionalities: In contrast to glass, birefringent crystals can exhibit birefringence, which is a requirement for various types of polarizers, wave plates, birefringent tuners, and other optical components. Commonly used birefringent crystal materials include YVO4, �±-BBO, quartz, calcite and sapphire. The lattice symmetry of a crystal material is not too high (such as a triangular, quadrilateral, or single prism), and it can exhibit nonlinearity. Nonlinear crystals are primarily used for nonlinear frequency conversion but also find applications in optical modulators like the Pokel cell. A wide variety of functional crystal materials can be used as laser crystals, serving as host materials for laser-active dopants (rare earth ions or transition metal ions). They typically exhibit relatively high transition cross sections, small gain bandwidth, and good heat conduction compared to laser-active glasses. In general, they also allow for higher doping concentrations. In some cases, functional crystal materials are used in spectral regions where glass does not have a wide enough wavelength range and high transmittance. In particular, various materials such as zinc sulfide (ZnS), zinc selenide (ZnSe) and Sapphire (Al2O3) are used as infrared crystals, and other materials such as lithium fluoride (LiF), calcium fluoride (CaF2) and magnesium fluoride (MgF2) are used as ultraviolet crystals. Some functional crystal materials, such as terbium gallium garnet (TGG), exhibit the Faraday effect (polarization rotation caused by magnetic fields), and they can be utilized in devices like Faraday rotators and Faraday isolators.
Shale Shaker Shale shaker manual is the first stage processing equipment in solids control system, can be divided into linear motion shale shaker and balanced elliptical shale shaker. shale shaker plays a key role in the whole solids control equipment system, mainly separate out the particles which are larger than 75um. As one of the most professional shale shaker manufacturers and shale shaker suppliers in China, BZ can provide linear motion single or double deck shaker, dual motion shaker, high frequency shale shakers and vacuum drying shale shaker according to user requirements. BZ shale shaker design has following characteristics: humanized-operation design, adjustable exciting force, adjustable deck Angle, compact structure and high cost performance, widely used in oil & gas drilling, coal methane exploration, horizontal directional drilling, oil sludge treatment, mining mud recycling, etc. Contact our drilling solids control equipment manufacturer for the latest shale shakers price! Shale Shaker Features & Benefits Adjustable G force up to 7.5G, capable of handling high viscosity and high specific gravity mud. Heat treatment on shaker deck for High G force running. Shaker deck bottom made by stainless steel for longer service life. Shaker deck angle can be adjusted while working. Durable rubber sealing, long service life, low abrasion and noise. Weir or top feed design for different needs. Easy and quick screen replacement by wedge type compaction. Italy Oli or USA Martin brand motor. Explosion proof standard: CNEX; IECEX; UL, ATEX; CU-TR, etc. Electrical components: SIEMENS, Schneider, ABB Brand. Shale Shaker Specifications Model BZS752 BZS583 BZS584 BZS585 BZS585S BZS586D Vibration mode Liner Motion Liner Motion Liner Motion Liner Motion Double Track Liner Motion Max Capacity 60m³/h (220GPM) 120m³/h (440GPM) 140m³/h (513GPM) 165m³/h (605GPM) 165m³/h (605GPM) 140m³/h (513GPM) Motor Power 2x0.8kW 2x2.2kW 2x2.2kW 2x2.2kW 2x2.2kW+1.3kW 2x2.2kW G Force 7.5G Adjustable Screen Size(mm) 750x900 585-1165 Up: 750x 900x2pcs Down: 585-1165x4pcs Screen Qty(pcs) 2 3 4 5 5 6 Screen Area 1.35-15ft² 2.04-22ft² 2.73-29ft² 3.41-37ft² 3.41-37ft² 4.08-44ft² Screen Type Frame/pretensioned Deck Angle 0°~+2° -1°~+5° -1°~+4° -1°~+5° Vibration Amplitude 4.5~6.0mm 4.5~6.3mm Noise(db)
PDC BIT Diamond PDC bit big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move drilling dicks, clean the drills, prevent drill bit mud bags, and increase mechanical drilling speed. Polycrystalline diamond drill bits anti-rotation design: The mechanical balance design is adopted, and the PDC bit design, orbital tooth design, and buffering block design are used to ensure the drill head anti-rotation performance. In drilling, where precision and durability are paramount, choosing the right PDC (Polycrystalline Diamond Compact) drill bits can make all the difference. As discerning operators seek the pinnacle of performance, Top Tools emerges as a frontrunner among PDC bit suppliers, offering a suite of unparalleled benefits that redefine drilling excellence. Types Of PDC Polycrystalline Diamond Drill Bits Matrix PDC Bit Composition: Constructed from sintered tungsten carbide, the bit is enhanced with synthetic PDC cutters and stabilized with heat-treated polycrystalline diamond. Durability: The tungsten carbide body offers robust erosion resistance, wear protection, and consistent diameter retention. Flexible Hydraulics: The waterhole design can be adjusted according to drilling hydraulic needs. Customizable Design: The bit's shape aligns with formation demands, and adjustments only require a mold change without additional equipment. Steel PDC Bit Steel PDC bit is machined with chromium and molybdenum alloy steel. After the heat treatment, the drill body is drilled, and the synthetic PDC cutter is brazed into the tooth hole of the drill body. Tungsten carbide alloy or composite piece is used to maintain the diameter, and tungsten carbide wear resistant layer is welded to the blade to enhance the wear resistance and erosion resistance of the steel body bit. Steel body bits are less abrasive and more likely to wash away than tire bits, but steel body bits are cheaper and easier to repair. PDC Drag Bit PDC Drag bits work well for drilling in plastic and brittle formations like mudstone, muddy sandstone, shale, etc. as well as soft to moderately soft soils. SML's Drag bits are often created in specialized designs, frequently from customer drawings and size specifications. PDC Core Bit PDC core bits, also known as hollow bits, are a type of thin, multi-toothed tubular bit that contains embedded carbide chips. Matrix vs. Steel Body Bit Steel-body The upper section of the steel body features threading to attach the drilling tool, while the lower section is sintered onto the body. The steel body can be crafted as a single piece or in a two-part configuration. In the latter, the top is fabricated from alloy steel with threads, and the bottom from mild steel affixed to the frame. These two sections are threaded together and subsequently welded for added strength.
PDC rock bits for Sale, crafted from Polycrystalline Diamond Compact, are preferred in oil drilling for their exceptional speed, longevity, and efficiency. They consist of a drill body, PDC cutting teeth, and a nozzle. Steel Body: Constructed from medium carbon steel using precise mechanical processes. Matrix Body: The top section is steel, while the bottom incorporates a durable tungsten carbide alloy, shaped through a powder metallurgy sintering technique. Types Of PDC Drill Bits For Sale PDC Bit Matrix PDC Bit Steel PDC Bit PDC Drag Bit PDC Core Bit Tricone Bit TCI Bit Steel Tooth Bit Hybrid Drill Bit Hybrid Bit Rock Reamer Roller Cone Reamer PDC Hole Opener PDC Reamer PDC Cutter Shaped PDC Cutter Why Choose Top Tool PDC Bits For Sale Opt for our one-on-one PDC drill bit customization, backed by lifelong after-sales service. Benefit from unparalleled cost-effectiveness and unique technical support, all anchored by our expansive facilities in Hubei Province. Unparalleled Production Prowess Nestled in Hubei, our two sprawling factories each cover an impressive area exceeding 50,000 square meters. Advanced Technological Equipment & Expertise Utilizing advanced machinery, we ensure precision with a CNC lathe accuracy of ±0.01mm. Our commitment to quality is validated by the government-awarded ISO9001 certification. Custom bulk drill bit service Prioritizing our clients' needs, we dedicate ourselves to enhancing the composite piece's performance and design, coupled with the architecture of the drill body, to ensure a superior drilling experience. The Superior Benefits Of Steel-Headed PDC Bits To increase its resistance to erosion, the bit crown is given a surface hardening treatment (carburization, tungsten carbide wear layer spraying, etc.). Steel-bit bodies have a great resistance to impact loading due to the strength and ductility of steel. Its production technique is straightforward. Steel bits have the advantage of being easily rebuilt several times due to the ease with which worn or broken cutters can be swapped out. The Superior Benefits of Steel-Headed PDC Bits Client Feedback On Top Tools Different customers evaluate our company at different levels : Our clients offer varied feedback regarding our services: Product Quality: Overall, our products are held in high regard and have demonstrated effective performance in tests. Customer Service: Our team remains courteous and diligent, readily addressing and resolving concerns. Shipping and Packaging: As one of drill bit manufacturers, we ensure swift deliveries complemented by meticulous and robust packaging. For inquiries on PDC bit pricing, please don't hesitate to reach out to us.
Custom Logo Cooler Bags Custom cooler bags come in a variety of sizes, shapes, materials and brands. They are perfect for a variety of events and special occasions. We offer a variety of custom logo coolers that can be used for your brand message or logo. When exploring the different options available, it's best to consider the goals of your upcoming marketing campaign. There are many benefits to customized reefer bags. Some of the advantages you can expect include: Affordability High perceived value Variety of decorating options Usability and versatility Types of Custom Logo Cooler Bags Our custom logo cooler bags come in different shapes, styles, sizes and colors to meet your marketing needs. You can give away branded insulated bags as lunch coolers for everyday use or choose one of our larger, heavy-duty coolers for camping and family outings. How to advertise and brand your business with custom logo cooler bags Today's cooler bags are a world away from the bulky box coolers of the past. Modern technology has made it possible to turn almost any type of tote or lunch bag into a cooler bag. The key is insulation technology and materials. Our logo imprinted promotional insulated cooler bags are made with multiple layers. Each bag has an outer layer and a fabric or plastic inner layer. Sandwiched between the outer and inner layers is some type of insulating material, such as PEVA (plastic/vinyl cross). Insulators such as PEVA have strong heat retention properties. The double lining further prevents temperature exchange between the inside and outside of the custom insulated cooler bags. Any type of custom logo cooler bags can be insulated in this way. SANNE offers a large assortment of imprinted insulated cooler bags that are perfect for taking to the beach, keeping lunch cool, or filling with cold beverages that will stay cold for hours. Our large insulated cooler bags are a great alternative to traditional promotional logo picnic coolers. They are much lighter in weight and are easy to transport and carry. Promotional logo cooler bags are great for storing and transporting: *Beverages, especially canned beverages *School or work lunches/meals *Grocery/food items that need to be kept cool on the way home *Medications that need to be refrigerated
