Technical feature: Stable structure with high brazing speed(about 4.5-12 seconds needed per tooth) The electronic control system automatically from takes , changes, installs and welds, and the whole process takes 10-15 seconds. Changeover mainly by inputting data into the machine control Both sides cylinders automatically fixed saw blades to improve precision. The high frequency heating system and Ceia induction heating system control the temperature automatically. The accuracy of controlled temperature is �±1â?? to ensure brazing strength and heating stability. Automatic teeth selection, feeding, dosing, silver solder foil cutting and folding just through one-stage processing. Suitable for mass production, one person can control 12 equipment at the same time Technical description: Sorting and feeding of the carbide tips through the automatic feeder and conveyor belt. Dosing of the flux onto the carbide tips. Cutting of the silver wire or soldering platelets from a coil and stamping onto the carbide tips. Dosing of the flux onto the silver welding wire or silver brazing foil. Transferring the prepared carbide carbide tips into the ceramic-equipped and water-cooled soldering tongs. Brazing of the carbide tips onto the saw blade. Loading and unloading of the unbrazed and brazed saw blades automatically by robot system. Technical data: Diameter of saw blades 100mm-400mm Rake angle -5 +25 Carbide tips width: 1.5mm 11.5mm Brazing accuracy: 0.05mm Thickness of saw blades: 1.0mm 5.0mm Speed of brazing : 4.5 12s/per tooth General power: 6.0kw The width of silver solder foil: 1.5mm 5.0mm Water pressure : 3KG Air pressure: 5KG Electricity: 220 V single phase 50 Hz (wire bigger than 6mm2) Weight: 500KG Dimension : 1600mm *1200mm *1700mm Time of change blades 8 15s/pcs
Sidewall Conveyor Belt, Sidewall Rubber Conveyor Belt, Steep Angle Sidewall Conveyor Belt Manufacturer 1. Applications There are no cleats on sidewall conveyor belt which is suitable for horizontal, short-distance transportation. (no cleats at the moment) 2. Structure It consists of two parts: -Base belt: high tensile strength, high abrasion resistant , good transverse stiffness and good lengthways flexibility. -Sidewall: high tensile strength, hot vulcanization with base belt, height up to 40-80mm, fabric reinforcement built in sidewall. 3. Sidewall conveyor belt specification Belt width (mm) Sidewall height (mm) Cleat height (mm) Effective belt width (mm) 400 60 - 80 70 100 90 120 100 500 60 250 80 70 100 90 120 110 160 140 650 60 250, 300, 350 80 70 100 90 120 110 160 140 200 180 800 60 350, 410, 460 80 70 100 90 120 110 160 140 200 180 240 220 1000 60 460, 550, 640, 690, 80 70 100 90 120 110 160 140 200 180 240 220 300 270 1200 60 460, 550, 640, 690 80 70 100 90 120 110 160 140 200 180 240 220 300 270 Huayue started business by producing rubber belts since 1982. It has been one of Solid Woven Convey or Belts manufacturers and is the major factory of fabric conveyor belt and Steel Cord Conveyor Belt in China.
Industrial Gantry type CNC plasma cutting machine with flame/gas torch is designed for sheet metal and tube fabrication. This industrial plasma cutter has gantry structure with double-driving system, All equipped with reducer transmission mode, more powerful. Its working size can be customized upon requirements. It can be used for cutting carbon steel, stainless steel and non-ferrous metal in any 2D graphics.. Plasma cutting for 0-30mm iron/steel, flame/gas cutting for 10-200mm iron/steel. Features of Industrial Gantry type CNC plasma cutting machine: 1. Two cutting ways optional: plasma cutting and (gas) flame cutting. 2. It can be applied to thick metal materials or non-ferrous metal cutting of enterprises. 0-200mm cutting. 3. Flexible, easy to operate, can moves can be cut, Using USB Flash Drive reading procedure and timely upgrade any time, and do not occupy fixed sites. 4. This machine uses 200A HUAYUAN water-cooled power supply, and its cooling effect is much better than air cooling. 5. STARFIRE control system, the file incision and export automatic correction , real-time tracking detection of plasma power in the process of cutting current. The control system uses the U-disk exchange processing document, easy to operate. English interface and other 5 languages:Russian, Spanish, French, Japanese, Czech, Slovak Parameters of Industrial Gantry type CNC plasma cutting machine: Model RB3000, RB4000 Effective Cutting Width (X axis) 2200mm, 3200mm Effective Cutting Width (Y axis) 6000mm Cross Beam Length 4000mm Longitudinal Rail Length 7500mm Cutting Speed 0-10000mm per minute Plasma power 63A, 120A, 200A Plasma Cutting Thickness 0-30mm Gas/Flame Cutting Thickness 10-200mm Drive Mode Bilateral drive Cutting Mode Gas (flame) /plasma cut metal Cutting Gas Acetylene/Propane Plasma Air Only pressed Air Plasma Air Pressure Max. 0.8Mpa Cutting precision �±0.5mm National standard JB/T10045.3-99 Working Temperature -10�°C-60�°C. Relative Humidity, 0-95%.
Product Description China Factory Construction Tower Crane Qtz80 (6010) 6ton 60m Jib Tower Crane for Sale Our company's products have four series and dozens of different specifications and models. QTZ series, construction topkit tower crane , 4808, 4810, 5010, 5012, 5610, 6010, 6012, 6013, 6015, 7030, 7040, 7050 tower cranes developed and produced by the company; QTP series, topless tower crane/flattop tower crane , 5015, 5510, 6010, 6013, 6015, 7015 flat-head tower cranes; QTD series , luffing tower crane , 3520, 4015, 5020 boom tower cranes; QW series 1830 and 3023 roof tower cranes and SC200/200 construction hoist elevators . QTZ80 (6010)-6T Tower Crane The QTZ80 (6010) self elevating tower crane is a new type of lifting and transportation machinery designed to meet the requirements of high-rise building construction and equipment installation. The crane is a multi-purpose tower crane with a horizontal arm frame, a trolley variable amplitude, and an upward rotating self elevating mechanism. The arm length is 60 meters, and the rated maximum lifting capacity is 6 tons. â??To be supplied as per client's specific require Features and advantages: 1. This machine has a wide range of adaptability, which can not only meet the needs of general civil buildings in small, medium-sized, and urban areas, but also fully meet the needs of high and multi-story civil building construction in large and medium-sized cities. It can also be used for the construction of multi-layer and large-span industrial factories, as well as tower-shaped buildings such as tall chimneys and silos that use sliding membrane construction. It can also be used for loading and unloading work at ports and freight yards. 2. Easy installation and disassembly, using hydraulic lifting devices to increase or reduce the standard section of the tower body, so that the lifting height of the tower crane can adapt to changes in building height 3. High working speed, good speed regulation performance, stable operation, and high efficiency. The lifting mechanism basically achieves heavy load, low speed, and light load, high speed 4. The safety protection devices are complete, sensitive and reliable 5. The driver's cab is independent and external, and uses a linkage console to control various mechanisms, making it spacious, comfortable, safe, easy to operate, and with a good view.
Jigs & Fixture Parts There are a wide variety of mechanical components. Our Fixture Parts are manufactured to precise specifications and include springs, bearings, actuators, clamps, snap rings, etc. Though most are very common, for most applications, Fixture Parts are designed to fit into their place in a piece of equipment. DESCRIPTION OF JIGS & FIXTURE PARTS What Is The Use Of Jigs & Fixture Parts? Mechanical parts are components that are used as the main structure of robotic systems. DETAIL OF JIGS & FIXTURE PARTS How Jigs & Fixture Parts Are Made? There are a wide variety of mechanical components. Each is manufactured to precise specifications and include springs, bearings, actuators, clamps, snap rings, etc. Though most are very common, for most applications, they are designed to fit into their place in a piece of equipment. The process begins with the development of a CAD design. From this initial rendering, each of the components is defined including measurements, function, and placement. When deciding on a component, it is important that it meets the standards of the overall design. They are available in multiple shapes and sizes and may have to be engineered from a standard form to specialized application. As a precision molding company, we can provide kinds of precision mold parts for sale, if you are interested, please contact us.
Metal Tube Legs MDF Top Square Dining Table, thanks to its distinct design, is an ideal choice for those seeking a modern and sleek dining space. Made of high-quality materials, this table features metal tube legs that offer structural stability, while the MDF top offers a sleek and durable surface. This distinct design, in comparison to conventional wooden dining tables, creates a clean and modern look that enhances the overall aesthetic appeal of the dining area. Its square shape, compared to traditional round or rectangular tables, adds a modern touch that fits in perfectly with contemporary dining spaces. In conclusion, this dining table offers excellent quality, sleek design, and modern aesthetic appeal, making it an excellent choice for those looking to enhance the visual appeal of their dining space.Hebei Dining Furniture Co., Ltd produces products covering various styles of dining chairs, including armchairs, side chairs, bar stools, and outdoor dining chairs, Please contact us if necessary,
The intelligent 200W pulse laser cleaning system has many advantages, such as good mobility, small laser head volume, light weight, convenient system parameter adjustment, wireless control, etc. It can efficiently remove rust, stains, oil stains, coatings, etc. on the surface of work pieces, and is suitable for industries such as mechanical processing, mold cleaning, food processing, electronic circuits, etc. By utilizing the characteristics of precise positioning, it can meet the processing of various shaped work pieces and achieve efficient cleaning effects. This cleaning machine relies on the advantages of the MOPA (Master Oscillator Power Amplifier) structure and is equipped with a 200W cleaning pulse fiber laser as the cleaning light source. This MOPA fiber laser has the characteristics of independently adjustable pulse width and frequency, and can still maintain a high stable peak power output even with modifications to the pulse width and frequency, to adapt to a wider range of cleaning scenarios. Interface: Equipped with IO control ports for linkage with automation devices. Directly control the device's output and stop lights through a teaching pendant. Control: The device provides control methods for industrial serial port screens, wireless industrial tablets, and mobile devices.
Silicon Carbide beam Reaction Bonded Silicon Carbide beam performance Silicon carbide beam is also called silicon carbide bearing beam and silicon carbide column. Silicon carbide beam has large high-temperature bearing capacity, oxidation resistance and no bending deformation after long-term use. It can significantly save energy consumption without increasing the weight of kiln car and has long service life. It is an ideal kiln for sanitary porcelain, electric porcelain and other industries Application of silicon carbide beam Silicon carbide beam adopt by slip casting process, mature sintering technology and extraordinary finishing ability. They are very suitable for manufacturing super large products with complex shape and strict tolerance requirements. They are suitable for the load-bearing structure of tunnel kiln, shuttle kiln, double-layer roller kiln and other industrial kilns. Specification of silicon carbide beam Accept the customization of silicon carbide beams and silicon carbide beams of different specifications Bearing capacity of silicon carbide beams :
This machine is one kind of double side rotary tablet press machine, which can press granular materials into round shape tablet, irregular tablet or double-side engraved tablet. This machine is mainly used in pharmaceutical, chemistry, foodstuff, electronic industries. Feature 1.High speed with large quantity punches, double press rollers, suitable for mass production. 2.Made of stainless steel, the housing is fully closed. The surface of the rotary turret is covered with a hardened layer so that the turret surface is wear resistant. The machine conforms to GMP requirements. 3.Perfect tableting system, twice compression forming, reasonable framework with proper space and big pressure roller, machine performance is reliable and no tablet weight difference. 4.Double impeller type force feeder, improve granules flow-ability and filling performance, ensure the filling precision. 5.Tooling track adopt double-side lifting structure, the punches are balanced stress and wear resistance. 6.High performance electrical control system, ensure each program processing precisely. 7.Automatic oil&grease central lubrication system, ensure the lubrication of pressure rollers, toolings and tracks, extending the working life of the machine.
This machine is one kind of double side rotary tablet press machine, which can press granular materials into round shape tablet, irregular tablet or double-side engraved tablet. This machine is mainly used in pharmaceutical, chemistry, foodstuff, electronic industries. Feature 1.High speed with large quantity punches, double press rollers, suitable for mass production. 2.Made of stainless steel, the housing is fully closed. The surface of the rotary turret is covered with a hardened layer so that the turret surface is wear resistant. The machine conforms to GMP requirements. 3.Perfect tableting system, twice compression forming, reasonable framework with proper space and big pressure roller, machine performance is reliable and no tablet weight difference. 4.Double impeller type force feeder, improve granules flow-ability and filling performance, ensure the filling precision. 5.Tooling track adopt double-side lifting structure, the punches are balanced stress and wear resistance. 6.High performance electrical control system, ensure each program processing precisely. 7.Automatic oil&grease central lubrication system, ensure the lubrication of pressure rollers, toolings and tracks, extending the working life of the machine. 8.Special oil proof, dust proof and noise proof design.
Metal bead curtain consists of thousands of small metal hollow balls with antiqued finishes or polished finishes that creates a vibrant and glamorous effect. It can be divided into three different types: round, faceted and ball bar ball. They all have extensive range of sizes and colors for your selection. A metal bead curtain is a decorative and visually captivating element made from metallic beads that are linked together to form a curtain-like structure. This type of curtain is commonly used in interior design, architecture, event d�©cor, and artistic installations to add texture, movement, and a touch of luxury to spaces. Metal bead curtains consist of individual metallic beads, often made from materials like stainless steel, aluminum, brass, or other metal alloys. These beads can vary in size, shape, and finish to create different visual effects. The beads are linked together in a chain-like manner, allowing them to move and cascade gracefully when disturbed, creating an engaging and dynamic visual display.
Professional Tube Metal Fiber Laser Cutting Machine Fiber laser cutting machine is one metal laser cutting machine. It can help us cut many different metals, such as stainless steel, carbon steel, copper, aluminum,brass, gold, silver, iron, titanium, alloys, etc. Tube laser cutting machine adopts with FSCUT3000S system, which is designed for tube cutting control, support standard tube(rectangle, circle, oval, ellipse and obround etc.) , free form , and steel channels(T/U/H/L shape) production of high precision and efficiency. Product configuration: 1. It can process square pipe, round pipe, rectangular pipe, oval pipe, channel steel, I-shaped steel, hexagon steel, etc. 2. Servo support design, more stable cutting. 3. One-key self-centering, fast clamping, rapid cutting. 4. The clamping force of the chuck can be adjusted according to the wall thickness of the pipe, which is convenient and efficient. 5. The rear chuck brakes quickly to ensure pipe cutting accuracy. Our advantage of fiber laser cutting machine: -- High precision, fast speed, smooth cutting edge, no burrs. --The laser head will not touch the surface of the material and will not scratch the workpiece. --It has the narrowest cutting seam, the smallest heat affected zone, the least local deformation of the workpiece, no mechanical deformation. --Good processing flexibility, it can cut any graphics, such as pipes and other special-shaped materials. Different cutting thickness requires different laser power, please tell us your material, size and thickness, therefore we can recommend you the suitable laser cutting machine.
Aluminum is a versatile material used in various industries due to its lightweight, corrosion resistance, and excellent thermal and electrical conductivity. Aluminum sheets, pipes, and coils come in different grades, each suited to specific applications. Here are some common grades: Aluminum Sheets: 1000 Series: Commercially pure aluminum with excellent corrosion resistance, high thermal and electrical conductivity. Common alloys include 1050, 1060, and 1100. 3000 Series: Aluminum-manganese alloys with moderate strength and good formability. Alloy 3003 is widely used in general fabrication, cooking utensils, and chemical equipment. 5000 Series: Aluminum-magnesium alloys with good weldability and corrosion resistance. Alloy 5052 is commonly used in marine applications, vehicle bodies, and electronic enclosures. 6000 Series: Aluminum-magnesium-silicon alloys with good formability and strength. Alloy 6061 is widely used in structural components, aircraft fittings, and automotive parts. 7000 Series: Aluminum-zinc-magnesium alloys with high strength. Alloy 7075 is one of the strongest aluminum alloys and is used in aerospace, military applications, and high-stress structural components. Aluminum Pipes: 6061-T6: A commonly used alloy in structural applications due to its high strength, corrosion resistance, and excellent weldability. 6063-T6: Known for its good formability, surface finish, and moderate strength, making it suitable for architectural applications and extruded shapes. 5086: A marine-grade alloy with excellent corrosion resistance, often used in boat hulls, pressure vessels, and cryogenic applications. Aluminum Coils: 1100: A commercially pure aluminum grade with excellent corrosion resistance and high electrical conductivity, used in applications requiring high thermal conductivity. 3003: A general-purpose alloy with good formability and weldability, commonly used in packaging, signage, and building facades. 5052: A high-strength alloy with good formability and corrosion resistance, used in marine, automotive, and electronic applications. 6061: A versatile alloy with excellent machinability and weldability, used in aerospace, marine, and automotive components. Each grade of aluminum offers specific properties suited to different applications. The selection of the appropriate grade depends on factors such as mechanical properties, corrosion resistance, formability, and cost considerations. It's important to consult with material suppliers or engineers to choose the right grade for your specific application requirements.
Concrete Block Maker A concrete block maker, often referred to as a concrete block machine or concrete block manufacturing machine, is a device used in the construction industry to produce concrete blocks, which are essential building materials for various types of structures. These machines automate the process of creating concrete blocks, which are commonly used for walls, pavements, and other load-bearing structures. Features Mold Options: Concrete block makers often come with interchangeable molds that allow you to produce blocks of different sizes, shapes, and designs. This versatility is useful for accommodating various construction needs. Automation Levels: Concrete block makers can range from manual machines that require human operation for each step, to semi-automatic and fully automatic machines that handle many processes automatically, including feeding, compaction, and demolding. Vibration System: Many machines incorporate a vibration system that helps to compact the concrete mixture in the mold, ensuring that the blocks have a dense and uniform structure. Hydraulic or Mechanical Systems: The compaction process can be driven by hydraulic or mechanical systems, both of which apply pressure to the concrete mixture. Hydraulic systems are often preferred for their precision and ability to exert consistent pressure. Curing System: Some advanced machines include a curing system that helps accelerate the curing process, allowing for quicker block turnover and reduced curing time. Control Panel: Automatic and semi-automatic machines typically have a control panel that allows operators to adjust settings, monitor the production process, and troubleshoot issues. Batching System: In some machines, an automated batching system accurately measures and mixes the raw materials in the correct proportions, ensuring consistent block quality. High Production Capacity: Depending on the model, concrete block makers can produce a significant number of blocks per hour, making them suitable for large-scale construction projects. Quality Control Sensors: Some machines have sensors that monitor the density, moisture, and strength of the blocks, ensuring that they meet quality standards. Energy Efficiency: Some modern machines are designed with energy-saving features to reduce power consumption during operation. User-Friendly Design: Manufacturers often prioritize user-friendly interfaces and ergonomic designs to make operation and maintenance easier for operators. Durability and Materials: High-quality machines are constructed from durable materials that can withstand the harsh conditions of a construction environment. Safety Features: Safety mechanisms such as emergency stop buttons, safety guards, and sensors are integrated into many machines to protect operators during operation.
Hexagonal Nut Product Introduction Introducing our premium quality hexagonal nuts, a vital component in various industrial and mechanical applications. These nuts are designed to provide superior strength, durability, and reliability, ensuring the safety and efficiency of your operations. Features and Benefits: Strength and Durability: Our hexagonal nuts are crafted from high-grade materials, such as stainless steel or carbon steel, ensuring they can withstand heavy loads and frequent use. The hexagonal shape also provides superior grip and torque transfer, ensuring a secure and tight fit. Versatility: These nuts are compatible with a wide range of bolts and threads, making them suitable for a variety of applications. Whether you're working on a construction site, in a manufacturing facility, or in an automotive workshop, our hexagonal nuts will fit your needs. Easy to Use: The hexagonal shape allows for easy installation and removal using standard tools like wrenches and pliers. This not only saves time but also reduces the risk of damage to the nut or the surrounding material. Corrosion Resistance: Many of our hexagonal nuts are treated with corrosion-resistant coatings, such as zinc plating or galvanizing, to protect them from rust and other forms of degradation. This extends their lifespan and ensures they can be used in harsh environments. Cost-Effective: Our hexagonal nuts are competitively priced, offering excellent value for money. With their superior performance and durability, they are a cost-effective solution for your fastening needs. Applications: Our hexagonal nuts find applications in various industries, including: Construction: Used in beams, frames, and other structural components to provide secure connections. Manufacturing: Used in machinery, equipment, and tools to ensure precision and durability. Automotive: Used in automobiles, trucks, and motorcycles to secure components and fasten parts. Conclusion: With their superior strength, durability, and ease of use, our hexagonal nuts are an essential component for any industrial or mechanical application. Whether you're looking for a reliable solution for your current project or need to replace worn-out nuts, our hexagonal nuts are the perfect choice. Contact us today to learn more about our products and how they can benefit your operations.
Camolino rice, also known as "H�¢m Ch�¢u" in Vietnamese, is a premium variety of rice renowned for its unique texture, flavor, and versatility in culinary applications. Originating from Italy, Camolino rice has gained popularity worldwide for its exceptional qualities, making it a favorite choice among chefs and home cooks alike. Camolino rice is characterized by its medium to long-grain structure, which is slightly shorter and plumper than traditional long-grain rice varieties. This unique shape contributes to its ability to absorb flavors and liquids, making it ideal for creating rich and flavorful dishes. One of the distinctive features of Camolino rice is its ability to remain firm and separate when cooked, while still achieving a creamy and velvety texture. This makes it particularly well-suited for preparing classic dishes such as risotto, paella, and pilaf, where the rice grains need to maintain their shape and integrity while absorbing the flavors of the ingredients. In addition to its culinary versatility, Camolino rice is prized for its delicate flavor profile, which is both subtle and slightly nutty. This makes it an excellent choice for pairing with a wide range of ingredients, from seafood and poultry to vegetables and spices, allowing for endless culinary creativity. At the heart of Vietnamese cuisine, Camolino rice, or "H�¢m Ch�¢u," has become a staple ingredient in many households, appreciated for its superior quality and ability to elevate everyday meals to gourmet heights. With its exceptional taste, texture, and versatility, Camolino rice continues to inspire culinary innovation and delight the senses of food enthusiasts around the world.
Concrete Wall Panel Extrusion Machine Concrete Wall Panel Extrusion Machine Description A concrete wall panel extrusion machine is a specialized piece of equipment used in the construction industry to produce concrete wall panels through the extrusion process. It is designed to automate the manufacturing of precast concrete wall panels with consistent dimensions and high-quality surface finishes. The working principle of a concrete wall panel extrusion machine involves the following steps: Concrete mixing: The machine is equipped with a concrete mixing system that combines cement, aggregates, water, and any necessary additives or admixtures. The ingredients are mixed thoroughly to achieve a homogeneous concrete mixture. Formwork preparation: The machine has a formwork system that consists of a set of molds or templates. These molds are designed to shape the concrete into the desired dimensions and surface textures of the wall panels. The formwork is prepared by applying release agents or other treatments to facilitate easy removal of the panels later. Extrusion process: The concrete mixture is fed into a hopper or a conveyor system that transfers it to an extrusion chamber or a specially designed die. The extrusion chamber applies pressure to the concrete, forcing it through the die. As the concrete passes through the die, it takes on the shape and dimensions of the wall panel, with the desired surface patterns or textures imprinted onto it. Reinforcement and embedding: Depending on the design requirements, the machine may incorporate reinforcement elements such as steel bars or mesh into the extruded concrete. These reinforcements enhance the strength and structural integrity of the wall panels. Other embedded elements like electrical conduits or insulation materials may also be included during the extrusion process. Curing and finishing: Once the wall panels are extruded, they need to be cured to achieve the desired strength. Curing methods can include steam curing, thermal blankets, or other techniques. After curing, the panels may undergo finishing processes such as surface treatments, polishing, or the application of protective coatings to enhance their appearance and durability. Panel cutting and handling: Once the panels have achieved the required strength, they are cut to the desired lengths using cutting mechanisms integrated into the machine. The cut panels are then removed from the formwork and prepared for transportation and installation at the construction site. If you have needs, please choose Lingfeng
Silicon Carbide Heating ElementDescription Silicon Carbide Heating Element can be installed and replaced while the tin bath is operation. The heaters can be installed through the side-seal, or through the side of the bath roof, and are commonly used to extend campaign lives, where conventional elements in the side zones have been broken, and insufficient power is available. Silicon Carbide Heating Element Advantages High purity raw materials; High structural density; Slow aging; Maximum temperature being up to 1500â?? (2732�°F); Easy to be installed and replaced. Types and Applications of Silicon Carbide Heating Element 1. SW (Standard) SW Silicon Carbides are used in applications ranging in temperature from 600�°C up to 1400�°C in both air and controlled atmospheres. Although the type of atmosphere used will determine the maximum recommended element temperature. This kind of silicon carbide elements can be mounted either vertically or horizontally. 2. U-TYPE U shape Silicon Carbide is consists of two silicon carbide rod with same diameter. Each rod has both hot zone and cold end with identical resistance. Two rods are connected by the low resistance SiC. Also the connector could be used as holder according to different requirements. 3. W-TYPE 3-phase elements are available in 2 different types: SGC (Dumbbell), SGD(Standard). These elements are self-bonded silicon carbide formed by re-crystallization of silicon carbide at high temperature. It consists of three high-purity silicon carbide rods connected at one end by a silicon carbide crossbar. SGC elements are designed for vertical installation in standard float glass bathes and SGD elements for horizontal installation. They can be connected directly on three-phase power supply and is a one-side terminal type which permits drawing out the terminals from the roof of the furnace. 4. Single Spiral Silicon Carbide and Double Spiral Silicon Carbide: They are made from silicon Carbide powder, and have two shapes: single and double sprial silicon carbide heating element. They are widely used in all kinds of kilns and furnaces.
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
Product Description Lithium Battery Powered Rail Bolt Wrench Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model LJ-LDB1701X Type Lithium Battery Torque Wrench Material Stainless Steel Dimensions (L x W x H) (mm) 1100*700*450mm Type Battery powered rail bolt wrench Rated voltage (DCV) 24-48 Max. torque 3000 N.m Motor speed (RPM) 0-3000 optional Impact frequency (BPM) 0-5000 optional Battery pack capacity (ah) 24-48 Operating temperature range (-40 ~ 50 â??) Operating range m6-m30 Torque control adjustable and controllable Weight 22kg
