Ferrous and Non Ferrous Metals Like Aluminium Product Like Ingots, T Bars, Sows, Billets, Rods, Copper Product Like Cathodes, Cakes, Billets, Ingots, Rods, Lead Ingots, Nickel Product Like Cathodes Both Cut And Uncut Briquettes, Pellets, Disc, Tin Ingots, Zinc Product Like Ingots Both Regular Size And Jumbos, Steel Billets Product Like Including Crc, Hrc, Hdgc, Plates, Sheets, Iron Ore, Scrap And Other Ferrous, Products With Alloys And Ores..
Ferrous and non ferrous metals like aluminium product like ingots, t bars, sows, billets, rods, copper product like cathodes, cakes, billets, ingots, rods, lead ingots , nickel product like cathodes both cut and uncut briquettes, pellets, disc, tin ingots, zinc product like ingots both regular size and jumbos, steel billets product like including crc, hrc, hdgc, plates, sheets, iron ore, scrap and other ferrous, products with alloys and ores.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite and iron ores), scraps of above items including hms 1&2 and steel scraps.
LED bulb, LED a bulb, LED t bulb, LED candle bulb, LED mr16, LED gu10, LED ufo lamp, LED r lamp, LED gx53, down light, street light, flood light, batten light, linear lamp, cross lamp, t5 light, t8 light, parking light, tri proof light, ceiling lamp, panel light, spot light, highbay light, CFL & LED lamps & LED fixtures.R & D, manufacturing, marketing, design and projects, servicing.
This product is a green mercury-free battery special graphite developed by our company on the basis of the original ultra-low molybdenum and high purity graphite. It has the characteristics of high purity, excellent electrical properties and ultra-low trace elements. Various trace elements in graphite are strictly controlled by the domestic advanced chemical production process. The technical performance of the products is stable, ranking the advanced level of similar products in China. It can completely replace the imported graphite powder, which can greatly improve the use and storage life of the battery, and is an important raw material for green and environmentally friendly mercury-free alkaline batteries. Type: T-399.9 Performance: high temperature resistance, good electrical and thermal conductivity, strong chemical stability, acid and alkali corrosion resistance, non-toxic and harmless, is an excellent green environmental protection material. Application: Mainly used in green mercury-free alkaline battery, secondary battery, lithium ion battery, tube inside and outside coating.
Stainless Steel Thread Tee Stainless steel threaded tees are designed to allow a line to be split into two lines with a connection that is at a 90-degree angle. Made of stainless steel, this type of tee offers excellent corrosion resistance, making it suitable for use in a wide range of environments, including those with exposure to moisture or harsh chemicals. Description A stainless steel threaded tee is a pipe fitting used to connect three pipes at a junction, forming a T-shape. The tee typically has female threads on all three ends, allowing for easy installation by screwing onto male-threaded pipes or fittings. Made of stainless steel, this type of tee offers excellent corrosion resistance, making it suitable for use in a wide range of environments, including those with exposure to moisture or harsh chemicals. SS tees are designed to allow a line to be split into two lines with a connection that is at a 90-degree angle. It can also be used to connect two lines into one main line when mixing chemicals. It's commonly used in plumbing, industrial, and construction applications where durability and reliability are essential. All threads are qualified and fittings are acid cleaned to ensure they are free from swarf and contaminants. 150 pound pressure rating.
Payments:T/T Delivery:2days for stock,OEM about 3-5weeks Origin:CHINA Packing:optical package Inspection:MIL Samples:Charge Sample Price:$0.10 Diffusion Bonded Crystal Bonding (Diffusion bonded) crystals consist of one laser crystal and one or two undoped material. They are combined by optical contact method and further bonded under high temperature. Diffusion Bonded Crystal helps to decrease thermal lens effect considerably. UPT can supply various standard assembly types as follows: Material Doping concentration(atm) or Optical Density(cm-1) Aperture (mm) Length of laser crystal(mm) YVO4+ Nd:YVO4 + YVO4 0.1%-3% 11-2020 0.15-30 2-15 YAG+Nd:YAG+ YAG 0.1%-2.5% 11-2020 0.125-200 2-15 YAG+Nd:YAG+Cr4+:YAG 0.1%-2.5% / 0.6~7 11-2020 0.125-200 2-15 YAG+Nd:Ce:YAG+ Cr4+:YAG 0.6~7 11-2020 0.125-200 2-10 YAG+Yb:YAG+ Cr4+:YAG 1%-45% / 0.6~7 11-2020 0.125-200 2-10 We have several assembly types as follows : For other assembly type and coating with HR+HT / PR/AR/HR are available, please contact us for more information.
Payments:T/T Delivery:2days for stock,OEM about 3-5weeks Origin:CHINA Packing:optical package Inspection:MIL Samples:Charge Sample Price:$0.10 Mirror product image Mirror is a reflecting surface that forms an image of an object when light rays coming from that object fall upon it. Usually mirrors are made of plate glass, one side of which is coated with metal or some special preparation to serve as a reflecting surface. UPT offers dielectric coated mirrors and metal coated mirrors which are made of substrate such as Bk7, K9, Fused Silica, CaF2, Sapphire. product image Specifications: Material: BK7 Grade A Optical Glass Typical Diameter (mm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 50.8 Typical Thickness (mm) 2.0, 3.5, 5.0, 6.5 Diameter Tolerance (mm) +/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) Clear Aperture >80% (Small Size), >95% (Large Size) Parallelism 6 min. (General), 3 sec. (High Precision) Surface Quality 80/50 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) (General), /10 (High Precision) Bevel (face width x 450)
EX02403-A01 is a 2.47 inch, ADS active matrix TFT LCD module with transmissive mode. The module dimension is 69.19(W)71.74(H)2.45(T)mm; active area 62.64(W)62.64(h)(2.47"diagonal). Its resolution is 480x480 pixels (width 480pixels x height 480 pixels) . This 2.47 inch round lcd display module has built-in IC HX8370-C supporting MIPI interface. The brightness is 400 cd/m2 with contrast ratio 1000:1. Operating temperature covers from -20~+70, storage temperature range is from -30~+80.This single-display module is suitable for use in industry, household appliances, toys and medical treatment, etc. As a professional round lcd display manufacturer, we provide china lcd display tft, round lcd module, round tft screen, lcd round, round tft lcd, china lcd module, etc. For more information, please feel free to contact us!
We have surplus pallets of Nitrile Medical Examination Gloves, all FDA Approved (501K), high quality material that we bought for a customer overseas but he wonâ??t be able to import due to the regulations in his country, as he has no permit for that. The gloves are already registered for sale at Amazon and Walmart, if so the buyer intends to follow that route. Our company is selling those for an extremely competitive price, so we can clean space in our storage and focus on our core products for export (medical devices/medical drugs). We offer for sale the pallets loaded with boxes of gloves (each pallet with 105 cartoon boxes with 1,000 gloves each (each box with 1,000 units comes with 10 small boxes of 100 units each, inside)). We consider a fair offer. Payment via wire transfer. Products can be inspected prior to payment. We can arrange shipment worldwide or send to the freight forwarder that you prefer. Look forward to hear from you soon.
Brief Introduction Leaming from German and Taiwan coating technology, combined withour own actual experience in powder production, Dongguan VsunnyMachinery Co., Ltd.independently researched and developed deep-processing equipment for surface treatment for a variety of inorganicpowder.It will be used to modify the D9710um ultrafine light (heavy)calcium carbonate, or surface treatment of the calcined Kaolin, theproduction capacity can reach 2.0T~4.0T/h;the coating rate 94%, and the unit energy consumptions35kwh/t. This continuous modification and coating machine can be used fordry surface modification of powder of various fineness from 325 meshto 3000 mesh, such as the surface modification and activation oflight calcium carbonate, heavy calcium carbonate, washed kadlin, calcined coal kaolin, talcum, quartz powder, mica, aluminum hydroxide, magnesium hydroxide and brucite, ulrafine and precipitated bariumsulfate, lithopone, white carbon black, titanium dioxide, coal ash, sericite, zinc oxide and other materials, while at the same time it candepolymenze and scatter the materials.
The scope of application Applied to the ships with the length 50m or above 50m as lamp signal liaison when night navigation. Products characteristic 1.The shell is made of high-strength engineering plastic PA+GF,the lampshade adopts injection of PC,lens hood adopts good quality stainless steel. 2.The signal lights have the whole seal structure,it is waterproof under the harsh environment. 3.The signal lights use exclusive LED illuminant which accords with ship rules and reguations,More energy efficient,longer working life. 4.The signal lights can work normally under the temperature -30~55 . Adopt standard GB/T 3028,MSC 253(8)resolution,THE INTERNATIONAL REGULATIONS FOR PREVENTINGS COLLISION AT SEA,1972 and GRADE ENTRY NORMS FOR STEEL SHIPS. Production patent Patent No:20172155879 Rated voltage AC100-240V 50/60Hz,DC24V Protection class IP56 Cable outside Diameter 10~12 Iluminant LED
Technical Parameters: Work table size (LxW): 6000x2300 mm; T-Slot (width-number-distance): 11-28-200 mm; Maximum work table loading capacity: 18000 kg; X/Y/Z Axis travels: 6000/2700/1000 mm; Effective passing width of gantry: 2700 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 10/10/10 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.04/0.02/0.015 mm; Repeated positioning accuracy: 0.025/0.012/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 48000 kg; Machine overall size: 16000x5140x4100 mm;
Technical Parameters: Work table size (LxW): 5000x2300 mm; T-Slot (width-number-distance): 11-28-200 mm; Maximum work table loading capacity: 15000 kg; X/Y/Z Axis travels: 5000/2700/1000 mm; Effective passing width of gantry: 2700 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 10/10/10 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.035/0.02/0.015 mm; Repeated positioning accuracy: 0.025/0.012/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 45000 kg; Machine overall size: 13500x5140x4100 mm;
Technical Parameters: Work table size (LxW): 5000x2000 mm; T-Slot (width-number-distance): 9-28-200 mm; Maximum work table loading capacity: 14000 kg; X/Y/Z Axis travels: 5000/2200/1000 mm; Effective passing width of gantry: 2300 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 12/12/12 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.04/0.02/0.015 mm; Repeated positioning accuracy: 0.025/0.015/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 40000 kg; Machine overall size: 13500x4750x3900 mm;
Technical Parameters: Work table size (LxW): 4000x2300 mm; T-Slot (width-number-distance): 11-28-200 mm; Maximum work table loading capacity: 12000 kg; X/Y/Z Axis travels: 4000/2700/1000 mm; Effective passing width of gantry: 2700 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 10/10/10 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.03/0.02/0.015 mm; Repeated positioning accuracy: 0.02/0.012/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 42000 kg; Machine overall size: 11000x5140x4100 mm;
Technical Parameters: Work table size (LxW): 4000x2000 mm; T-Slot (width-number-distance): 9-28-200 mm; Maximum work table loading capacity: 12000 kg; X/Y/Z Axis travels: 4000/2200/1000 mm; Effective passing width of gantry: 2300 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 12/12/12 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.035/0.02/0.015 mm; Repeated positioning accuracy: 0.025/0.015/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 37000 kg; Machine overall size: 11000x4750x3900 mm;
Technical Parameters: Work table size (LxW): 4000x1800 mm; T-Slot (width-number-distance): 9-22-190 mm; Maximum work table loading capacity: 10000 kg; X/Y/Z Axis travels: 4000/2000/1000 mm; Effective passing width of gantry: 2000 mm; Distance from spindle nose to table: 180-1180 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 12/12/12 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.035/0.02/0.015 mm; Repeated positioning accuracy: 0.025/0.015/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 31000 kg; Machine overall size: 11000x4150x3800 mm;
Technical Parameters: Work table size (LxW): 3500x1600 mm; T-Slot (width-number-distance): 9-22-180 mm; Maximum work table loading capacity: 8000 kg; X/Y/Z Axis travels: 3500/2000/1000 mm; Effective passing width of gantry: 1800 mm; Distance from spindle nose to table: 150-1150 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 12/12/12 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.035/0.02/0.015 mm; Repeated positioning accuracy: 0.022/0.015/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 30000 kg; Machine overall size: 10000x4000x3900 mm;
Technical Parameters: Work table size (LxW): 3000x2300 mm; T-Slot (width-number-distance): 11-28-200 mm; Maximum work table loading capacity: 10000 kg; X/Y/Z Axis travels: 3000/2700/1000 mm; Effective passing width of gantry: 2700 mm; Distance from spindle nose to table: 280-1280 mm; Main spindle speed: 6000 rpm; Spindle motor power: 22 kw; Spindle taper: BT50 ; Torque of X/Y/Z-Axis motor: 36/36/36 Nm; Rapid feed speed (X/Y/Z): 10/10/10 m/min; Cutting feed speed (X/Y/Z): 10000/10000/10000 mm/min; Positioning accuracy: 0.025/0.02/0.015 mm; Repeated positioning accuracy: 0.02/0.012/0.010 mm; CNC Controlling system: Fanuc ; Machine weight: 37000 kg; Machine overall size: 7750x5140x4100 mm;
