Environmentally friendly products that have become a mainstay abroad for various businesses such as F&B, Retail, Hospitality and also small & medium businesses. Contains No Plastic Can be used several times Easily Decomposed in Nature and Air Not Toxic to the Environment & Sea Animals Reducing Sea & Land Pollution Stylish, modern, with a soft texture and doesnâ??t have a strong smell like usual plastic. The best choice for businesses looking to make a positive contribution to the environment. Dimension: 8 oz : 80 x 55 x 90 mm 12 oz : 90 x 58 x 110 mm 16 oz : 90 x 58 x 137 mm
This environmentally friendly Cassava Bag is a local product that has become a champion overseas for various businesses such as F&B, Retail, Hospitality and also small & medium businesses. Contains No Plastic Can be used several times Can be Composted in Less Than 180 Days Easily Decomposed in Nature and Water Not Toxic to the Environment & Sea Animals Reducing Sea & Land Pollution Stylish, modern, with a soft texture and doesnâ??t have a strong smell like usual plastic. The best choice for businesses looking to make a positive contribution to the environment. Dimension: 23 cm x 38+4cm x 50 micron
Environmentally friendly products that have become a mainstay abroad for various businesses such as F&B, Retail, Hospitality and also small & medium businesses. Contains no plastic Can be composted & easily decomposed Strong & can be used repeatedly Non-toxic to the environment & sea animals Environmentally friendly, good for reducing sea & land pollution Stylish, modern, with a soft texture and doesnâ??t have a strong smell like usual plastic. The best choice for businesses looking to make a positive contribution to the environment. Features: Biodegradable & compostable FSC certified Last optimally up to one hour of usage Dimensions: 6 x 197 mm
Brief introduction of pneumatic three-way ball valve: Pneumatic three-way ball valve is used for medium reversing, confluence and diversion in pipelines. It is mainly composed of T-type or L-type three-way ball valves connected with pneumatic actuators. According to different connection methods, it can be divided into flanges and internal threads. Pneumatic three-way. type ball valve is to switch or store the flow direction of two mutually perpendicular channels, and achieve the distribution function, while the T-type ball valve can not only switch the flow direction of the material, but also make the three channels Interconnect or close any one of the channels to play the role of diversion and confluence. According to the needs of T conditions, a valve positioner and other related accessories can be installed on the pneumatic one-pass valve liner to control the operation of the ball valve core. Achieve automatic control of the medium in the pipeline. Advantages of pneumatic three-way ball valve: 1. Different connection forms can be selected, which are divided into pneumatic flange three-way ball valve and pneumatic thread three-way ball valve to meet different working conditions. 2. Sealing effect, the elastic deformation of soft seal tetrafluoroethylene can achieve leak-free sealing. 3. One valve with multiple functions: it can be made into an L-shaped port or a T-shaped port to achieve functions such as distribution, confluence, and diversion. 4. The pneumatic three-way ball valve is easy to install, and any port can be used as the flow inlet of the medium, and there is no leakage 5. It is widely used in environmental protection, oil products, metallurgy, steam, energy, papermaking, food and other pipeline systems to change the flow direction of the medium or achieve the separation or mixing of the medium. Pneumatic three-way ball valve standard specification: 1.Design and manufacture: GB/T12237-1989; API608. 2.Inspection and test: GB/T13927-1992; API598. 3.Flange connection: JB/T79]-2-1994; ASME/ANSIB165. 4. Structure length: JD-2002 Response device: also called limit switch, remote feedback switch signal (explosion-proof) Solenoid valve: choose two-position five-way for double action, two-position three-way for single action (explosion-proof) Triple piece: It can stabilize the air source, filter, and add lubricating oil to the cylinder Valve positioner: Input 4~20mA signal to realize valve adjustment function YT-1000R
ultra soft baby diaper All materials accept customized: 1. Absrobent core: San-Dia SAP, Sumitomo SAP, China SAP, etc; 2. Topsheet: Spunbond NW, Hot air NW, organice cotton, etc; 3. Backsheet: PE film, cloth like, etc 4. Magic tape: S cut, Straight, etc 5. Enlarge elastic waist band, samall elastic waist band, without elastic, etc 6. Package: Any baby shape, material, etc 7. Diaper shape: Elastic waist band, T shape, etc
Technical data - OXE 200 Engine type: Diesel, L4 Displacement: 2.0 L Intake: Turbocharged, inter-cooled Torque: 415 Nm at 2500 rpm Power: 200 HP at 4100 rpm Fuel: Diesel EN 590, ASTM D 975 No.1 No.2. JIS KK2204, F54 & F75 Weight: 350 kg Alternator output: 130 Amp Rig length: 25 or 33 Cooling: Closed cooling circuit Starting: Electric Steering: Electronic Power Steering Shi�¿t: CANbus, Electro-hydraulic Clutch: Hydraulic multi-friction plate Gear ratios: 1.73:1 and 2.17:1 Dimensions (25 leg), LHW 994x1880x678mm
Product Name Titanium ball Material Pure titanium /Alloy titanium Color Metal Color Titanium ingot Made by 100% Zero-Grade titanium sponge Process Titanium sponge-Titanium ingot-Forge-Slabs-Hot Test U/T 100%, Surface check 100% outer diameter 2-200MM Product advantage Overall grinding, high finish, high tolerance, mirror surface treatment, beautiful appearance, ornaments, sealing and other industries Technical advantage Overall grinding, the ellipticity is very small, surface grinding and polishing, high finish, high corrosion resistance The above are common specifications, also can be customized according to customer requirements.
Fami Go soy milk is made from 100% selected soybeans, combines Adzuki beans and violet glutinous rice. Providing enough 4 essential nutrients: protein, starch, fat and vitamin. Fami Go is a new product in 2018, serving consumers with busy and active lifestyle, especially the urban youth, who donâ??t have enough time for a nutritious breakfast. Fami Go is especially produced for fast breakfast, enhancing 50% soy protein and over 40% energy(*), not only brings consumers nutritious breakfast but also helps to start an effective and joyful day.
Austenitic stainless steel refers to the stainless steel with chromium nickel as the main alloy element and has austenitic structure at room temperature. The stable austenitic structure is obtained when Cr, Ni and C are about 18%, 8%~10% and 0.1% respectively. Austenitic chromium-nickel stainless steel includes the well-knew 18CR-8Ni steel and the high Cr-Ni series steel developed by adding elements such as Mo, Cu, Si, Nb, Ti and so on. Austenitic stainless steel is nonmagnetic and has good mechanical properties (high toughness and malleability), easy to be machined, stamped and welded. High chromium content greatly improves the corrosion resistance of steel, because the surface is easy to form a very dense and hard chrome oxide protective film. In the oxidizing environment, it has good corrosion resistance, heat resistance and low temperature resistance, suitable for heavy load and no high requirements corrosion resistance equipment and components, and has a very wide range of uses especially in civil, light industry and other fields. Grads:304, 304L, 316, 316L, 310S, 321, 321H, 347, 347H Chinese Standards: GB/T 12771-2019, GB/T 24593-2018, HG/T 20537.1~4-1992 American Standards: ASTM A312-21, ASTM A358-19, ASTM A249-18, ASTM A778-16, ASTM A813-14, ASTM A1016-18ï¼? European standards: EN10217-7: 2021.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Mobile Screening & Sand Washing Plant is a single-chassis solution for stone, sand other mineral quarries where the product needs to be sorted out and washed to get clean and ready-for-usage construction aggregate. Being one of the developed solutions for the stone crushing field, all parts of the line are constructed on a single chassis, where attachments like additional bunker walls, walking platforms, and conveyor belt are of foldable design. DISTINCTIVE FEATURES OF THE MACHINE: 1. Compact design: loading hopper, vibrating screen, screw sand washer, conveyor belts, diesel generator & walking platforms are installed on a single mobile chassis. 2. Easy transportation: machine can be transported with a single truck head. 3. Fast assembly and dismantling work: assembly work of the machine takes only 2 days. 4. Screening & Washing of the product: a combination of screening & sand washing processes can be performed with a single machine in place. 5. Stocking: foldable design conveyor belts are supplied with hydraulic pistons, which allow for the assembly of conveyor belts from a control panel to easily. Mobile Screening & Washing plant models are: SMSW 1240 600x6300 mm Single Helix / 1200x4000 mm screen / 60-100 T/H SMSW 1650 600x6300 mm Double Helix / 1600x5000 mm screen / 150-200 T/H SMSW 2250 800x8000 mm Double Helix / 2200x5000 mm screen / 250-320 T/H
All kinds of stainless steel, copper, iron inside and outside hexagonal, flat machine, round machine, tight, t ring, loose joint, self tapping, chemical bolts, iron expansion, full tooth screw, screw, nut, dowel, stop, core pulling aluminum cap nails, hardware tools, mold accessories, custom non standard.
Spare parts for diesel engines, recon engines, long block engines , short block engines ( brands cummins, cat, komatsu, mitsubishi, beml, alco, etc) diesel locomotive ( brands like bhel, wds, alco, san , ovis, ventra ), excavators, dozers, dumpers , wheel loader ( brands like komatsu, l&t, hitachi, jcb, beml, cat , etc), wheel , wheel axle, brake blocks , lcc, electrical & mechanical parts ..
Mineral fiber ceiling tiles, ceiling t grids, fiberglass acoustic panel, pvc gypsum ceiling tile, gypsum board, gypsum cornice, rockwool acoustic panel, fabric wrapped acoustic panel, insulation materials, polyester fiber acoustic panel, aluminum ceilings, fiber cement board, pvc panel, light steel channel, glass fiber self adhesive tape, paper joint tape.
T bars ceiling grid, ceiling tiles (calcium silicate ceiling tiles, gypsum ceiling tiles, mineral fiber ceiling tiles, metal ceiling tiles), partition frame, partition boards (calcium silicate boards & fiber cement boards, gypsum boards), fiberglass wool insulation / rock wool insulation, all purpose joint compound/ skim coat compound, flooring series (spc, wpc etc.).
Hot rolled coils / sheets, cold rolled coils / sheets, galvanized coils / sheets, steel beams, ipn, upn, ipe, wfb, c channel, pfc, ub/uc, equal angles, flat bars, square bars, t bars, round bars, reinforcing steel bars, wire rods, rebars in coils, pipes and hollow sections.
Ferrous and Non Ferrous Metals Like Aluminium Product Like Ingots, T Bars, Sows, Billets, Rods, Copper Product Like Cathodes, Cakes, Billets, Ingots, Rods, Lead Ingots, Nickel Product Like Cathodes Both Cut And Uncut Briquettes, Pellets, Disc, Tin Ingots, Zinc Product Like Ingots Both Regular Size And Jumbos, Steel Billets Product Like Including Crc, Hrc, Hdgc, Plates, Sheets, Iron Ore, Scrap And Other Ferrous, Products With Alloys And Ores..
Ferrous and non ferrous metals like aluminium product like ingots, t bars, sows, billets, rods, copper product like cathodes, cakes, billets, ingots, rods, lead ingots , nickel product like cathodes both cut and uncut briquettes, pellets, disc, tin ingots, zinc product like ingots both regular size and jumbos, steel billets product like including crc, hrc, hdgc, plates, sheets, iron ore, scrap and other ferrous, products with alloys and ores.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite and iron ores), scraps of above items including hms 1&2 and steel scraps.
