Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Material: aluminum Diameter:13.5/16/19/22/25/28/30/32/35/38/40mm Length:customized -cap option: small screw up, big screw up cap, flip top cap etc. -printing : 1-6 color offset printing -sample time Samples can be finished around 15 days after payment and artwork's final approval. -payment term T/t, 30% down payment, 70% before shpt. - quality warranty Gmp clean workshop for pharmaceutical packaging and the iso 9001:2000 for quality system. The new lines which are state-of-the-art, high-speed (150 tubes per minute) fully automatic and computerized make the products' quality excellent and stable. We'll also take responsibility for the products which are proved to be our quality defects without any hesitation. Covered by pe then packed by carton
Product Name:Carpet Tiles,Square Carpet Construction : Tufted, Textured Loop Pile Face Fiber : 100% plencolor Certified Nylon 6 yarn (Twisted and Heat Set for Maximum Performance ) Stain Repel/Stain Resist/Soil Release : in protection Antimicrobial : In Protection Dye Method : Solution dyed Finished Face Weight 20 oz./sq.yd. (678.1 g./sq.m.) more Gauge 1/12" (47.20/10 cm.) Rows 10.7/in. (42.1/10 cm.) Tufts 128.40/sq.in. (1,987.12/100 sq.cm.) Finished Pile Height 0.10-0.22 in. (2.5-5.5 mm.) avg. Standard Backing PVC-Free Comfort Nominal Total Thickness 0.28 in. (7.00 mm.) Tile Size 20 x 20 in. (500 x 500 mm.) Nominal Total Weight 114.0 oz./sq.yd. (3,865.4 g./sq.m.) Flammability (Radiant Panel ASTM-E-648) 0.45 (Class I) Smoke Density (NFPA-258-T or ASTM-E-662) 450 Methenamine Pill Test (CPSC FF-1-70 or ASTM D 2859) Self-Extinguishing Lightfastness (AATCC 16E) 4.0 at 80 hrs. Crocking (AATCC 165) 4.0 wet or dry Static Electricity (AATCC-134) 20% R.H.,70 F. 3.5 KV, Permanent Conductive Fiber Dimensional Stability - Aachener Test (DIN Standard 54318) 0.2% Appearance Retention Rating (CRI TM101) Severe Use Specifications subject to normal manufacturing tolerances and may be changed without prior notice. Copies of actual test results available upon request.
Introduction:The PCD Standard Inserts are made by imported element 6, GE raw materials, used high-precision peripheral grinder to produce high-quality PCD tools. PCD Standard Inserts are widely used in high-silicon aluminum alloy, stone and other non-ferrous metals and non-metal processing. Details Photo: Models: Applications of PCD Standard Inserts: 3c field, aerospace, automotive industry, etc. Specificationï¼?Please contact me for specific specifications Application Cases of PCD Standard Inserts: Advantages of PCD Standard Inserts: Higher metal removal rates Faster cycle times Reduce waste Quality improvement Stricter size control Perfect surface finish Increase productivity Improve equipment utilization Pack: Cartons and bubble wrap Minimum Order Quantity: Price Range: Payment: TT; Paypal; Delivery Time: Seven to ten days Sample: No free samples are provided Certification: FOB Port: Shanghai Qingdao Guangzhou
Bamboo processing machines have undergone significant advancements, aiming to enhance efficiency, reduce labor costs, and improve the quality of bamboo products. Among these innovations are automatic bamboo splitting machines, wire drawing machines, and bamboo strip rough planer machines. Bamboo processing machines are specialized equipment designed to handle the transformation of raw bamboo into various finished products. The bamboo industry encompasses a wide range of applications, from construction materials to furniture, and from handicrafts to edible bamboo shoots. Depending on the intended end product, bamboo processing can involve a variety of machinery, each tailored to specific stages in the processing chain. Bamboo processing machines play a pivotal role in automating various stages of bamboo processing. They offer a range of functionalities, from splitting bamboo poles to crafting intricate bamboo products. EOOE specializes in creating multifunctional machines that streamline the bamboo processing workflow. Their machines are designed to reduce manual labor, increase productivity, and ensure high-quality output.
Big Round Charcoal Grills Large industrial-sized, highly-durable, smokeless smoker round charcoal BBQ grills for smoking barbecued meat. The circular charcoal grill design effectively retains heat, ensuring even and consistent cooking. With multiple vents, you have full control over the heat intensity, allowing for precise temperature adjustments. Toposn round bbq charcoal grill wholesale are competitively priced, making them an excellent choice for those seeking high-quality circular charcoal grills for smoking barbecued meat. Features of Charcoal BBQ Round Grill The home charcoal portable round bbq grill features a convenient Bakelite handle, allowing for easy portability wherever you go. It is equipped with a locking catch, ensuring hassle-free carrying. The entire body of the portable bbq round charcoal grill is coated with a high-temperature paint finish, providing durability and resistance to heat. Cooking grid, 2pcs, chrome plated, charcoal grid, 2pcs, zinc plated. These features enhance the functionality and longevity of the round charcoal smoker, making it an excellent choice for grilling enthusiasts. As one of barbecue equipment manufacturers, we can provide kinds of barbecue equipment & supplies for sale, if you are interested, please leave us a message.
Product Characteristics 1. Easy to operate Centralized touch display panel operation, pressure display, roll speed display, polishing head reciprocating times display. All the parameters could be set and adjusted according to the demands. 2. Good finish 1. The vibration frequency of the polishing head is adjusted by frequency conversion; the pressure is adjusted by cylinder which could satisfy all required vibration frequency and pressure for different crafts. 2. The moving of polishing head adopts linear guide rail and gear rack drive structure, so that the advance and retreat error is kept about 0.02 mm. 3. High precision spindle and bearing ensure the spindle smooth rotation with high precision, variable frequency stepless speed regulation in order to meet the speed needs for different processes. 3. Tailstock jacking and automatic locking, foot switch easy to operate. 4. High Automation The whole machine is controlled by German Siemens (Japan Mitsubishi) PLC, which realizes the automatic control of the whole machine. The inverter adopts imported frequency converter, which greatly improves the service life of the whole machine.
Product Features: Gravure cylinder chrome polishing machine with Fully automatic control, simple structure, small space, high efficiency, low noise, it is polishing after rotogravure chrome plating, can effectively improve the life of the cylinder roto printing, is an effective machine for chrome surface polishing. Product Introduction Engravured cylinder chrome polishing machine with Fully automatic control, simple structure, small space, high efficiency, low noise, it is polishing after rotogravure chrome plating, can effectively improve the life of the rotogravure printing cylinder, is an effective machine for Chrome Surface Processing Equipment. Product Advantage: Gravure cylinder chrome polishing machine with Good roughness and good printing-life Rotogravure Cylinder Making Chrome Machines with Water-saving system chrome polishing machine program can controls the quantity of the water and Power saving ROTO printing cylinder chrome polishing machine with Servo motor control intaglio cylinder chrome machine with Good surface finishing and good printing quality
Cellrato Eye Liner / Auto Eye Brow Pencil 1.Liquid eye liner that provides intense line with one touch. 2. Completely Clear Finished line with smooth texture. 3. Capacity : 0.6g 4. Color : Black and Brown A.Auto Eye Brow pencil a.BLACK :For dark black hair or clear eyebrows. b.Dark brown : If you want brown eyebrows, or a color that goes well with deep brown hair. c.Gray : A color that goes well with the deep blue dyed hair color that is gray with a little bit of blue. d.Taupe : Hair color matched with dark brown color ,Matching with mild smokey makeup. e.Brown : Bright colors including brown color.Matching with light skin tone. Natural color like my eyebrows.: Create natural color like my eyebrows with delicate drawing. Long-lasting eyebrow: It is strong against sweat, water and oil, so the color lasts for a long time. Minimize irritation with a soft feeling: Drawing without irritation is possible by blending plant-derived ingredients. Creates even eyebrows without clumping.
Coils: As stockist of stainless steel products, we also provide steel coils for various industrial and other usages. They are available in various dimensions as required for the end purpose. Pipes: Apart from other things, we also provide steel pipes according to the technology like seamless and ERW. They are used in a number of industries like sewage and water and any other use. Strips: Stainless steel stripes are useful in manufacturing industries where steel strips are required to join hinges. These stripes have also found way in packaging of heavy industries. Rods: We provide stainless steel rods for construction and reinforcement sites. Stainless steel rods are of the best quality and have the resistance to bear this rod. We have also been providing stainless steel rods to industries like petrochemical industries where they require rods that are not only strong but also rust resistant. Tubes: We offer stainless steel tubes in variety of requirements like stainless steel tubes and stainless steel pipes as proposed by the clients. The tubes are choices in shapes like, round, oval, rectangular and square tubes. Tubes are also available according to finish and usage.
Bright beer tank capacity ranges from 100L to 300KL, with single wall or double walls, constructed by high quality of stainless steel 304, sanitary fabricated&polished, 100% TIG welded. All of the beer tanks are inspected seriously and pressure tested before delivery. Configurations include Finish: exterior bushed, interior polished roughness less than 0.6um Designing pressure: 0.25MPa, working pressure: 0.15MPa Dished top&bottom, with 25% head space Dual zones of dimple cooling jacket with glycol inlet&outlet 1 male thread,3 zones for larger bright tank. Polyurethane insulation 80mm thickness 4 legs with levelling foot pads and connecting tubes Side elliptical manhole on the front side Discharging port with butterfly valve and tri clamp Safety valve CIP arm and spray ball Temperature probe Pressure gauge Vacuum & pressure relief valve Level indicator Carbonation system Sample valve Tanks complete with valves and tri clamps. All ports&tubes are handled smoothly with no burrs. All the welds and joints are ground smoothly to insure sanitation.
Bi-metal bushes are able to handle heavy loads and shock loading conditions. Our bimetal bushes have anti-corrosion capabilities and are easy to install, making them ideal for emergency replacements. Crown thin walled bearing is available with stainless steel, carbon steel or bronze backing. Designed for harsh operating conditions, the bearings feature a bi-metal compositionâ??steel backing and a bronze overlay. They support high specific loads and offer superior performance under oscillating movements. Among many uses for these products, the crown bi-metal bushes will most notably benefit transmissions and truck brakes as well as agricultural, mechanical handling and lifting applications. They boast a high load capacity and very good resistance to fatigue strength at high temperatures. Bi-metal bushes are composed of two different materials; the first is steel, the second is an alloy containing copper, which when coupled with the steel strip acts as an internal covering. Bi-metal Bush offered can be made available in both standard as well as customized finish variations. We are known as a market leading manufacturer and supplier of quality assured Bi-Metal Bushes. Designed using the best quality raw materials and sophisticated technology under the vigilance of our experienced professionals, these bushes are used in gearboxes, brakes and connecting rods.
Description: The mono-crystal diamond tools can obtain excellent cutting edge through grinding. The surface finish of single crystal diamond tool can reach more than 0.01micron (Ra < 0.1 um)The world's top brands of raw materials: E6 single crystal diamond. Applications of Mono Crystal Diamond Tools: Application industries: optical lenses, 3C, medical contact lenses, electronic, jewelry, watch marking and automotive industry, etc Types Of Mono Crystal Diamond Cutting Tools Depending on the equipment (CNC machine tools, CNC machining centers, etc.) and cutting processes used in different working conditions, single crystal tools can be welded on different tool bodies as required to make different cutting tools. Common types of single crystal tools Single crystal diamond inserts, Non standard Single crystal diamond turning tools, Mono crystal diamond milling tools, Mono crystal chamfering cutters, MCD grooving cutters, Single crystal ball milling cutters, monocrystalline diamond end mill, etc - MCD non-standard square bar type turning tools - MCD mono crystal diamond Arc cutting tools - MCD Non-standard integrated top and bottom chamfering cutting tools Application of MCD non-standrad chamfering tool - Chamfering of the outer frame of non-ferrous metals such as copper, aluminum, etc. - The peripheral chamfering of mobile phone shell parts. - Reasonable design and speed feed can eliminate the residual tool marks in the processing, and truly achieve the mirror surface of the processing surface effect - The grain processing efficiency is higher, especially the mosaic welding, the speed can reach 70,000 revolutions/min, and the feed can reach 4000 mm/min, but it is inevitable that there will be residual tool marks in the processing. Precious metal processing, jewelry industry: gold, silver, platinum products of carving processing. Medical Industry: contact lens and IOL (single-crystal mills and drills). Contact lens machining tools are free from scratches and burrs on the contact lens that may occur during finishing process. Printing industry: roller mould Automotive industry: night driving optical system, projection lights, aluminum alloy wheels, etc.Defense and aerospace industry: navigation gyro for missiles New materials ceramics, engineering plastics. motorcycle trailers, shipbuilding, rail transportation and other industries. Advantages of Mono Crystal Diamond Tools: Geometries and dimensions are maintained exactly. - High homogeneity, no microstructure. - Allows the production of highly precise cutting edges for maximum surface accuracies. - Cutting edges are extremely sharp. - Machining can be performed without restrictive contours.No special tools required. - Constant process reliability and assured reproducibility. - Surface qualities with Ra < 0.1 um are possible! - Turning in polishing quality.
Introduction: MORE supplies diamond honing tools designed for your specific application. The single stroke honing tool is also known as a single pass honing tool that incorporates a super abrasive sleeve mounted on a tapered mandrel for precision bore sizing and finishing. Each individual piece of this diamond tool is designed to be matched with corresponding honing machines. According to different workpieces, customers can choose from our existing models of honing tools, or customize a new honing tool. Electroplated and sintered diamond honing tools are divided into adjustable fixed honing tools and adjustable floating honing tools. The honing machine is a one-piece electroplated and sintered diamond tool with a single up and down stroke to grind away the excess. Processing materials: mild steel, hardened steel, cast iron, copper, carbide, ceramics, glass, etc. Details According to the different particle size of diamond, it can be used for rough honing, fine honing and fine grinding. The superior diamond plating process ensures long tool life and low cost per part. Improved abrasive sleeve design for chip quick removal. Greater accuracy and increased production efficiencies. Custom design to meet your specific requirement. Capable of adapting to most honing machines. Applications of Single Pass Diamond Honing Tools: The products are suitable for honing inner hole of cylinder hole of refrigerator and air conditioner compressor, piston hole, nozzle oil pump, hydraulic valve, motorcycle, automobile engine cylinder block, gear, powder metallurgy parts, super hard parts, distribution valves, ABS, brake cylinder, supercharger, rocker arms, connecting rod, parking pawls, crankcase, sprockets, powdered metal components, ceramic components and so on. Application Cases of Single Pass Diamond Honing Tools: Advantages of Single Pass Diamond Honing Tools: High Precision Single-pass honing tools, single-pass honing reamer (Expansion reamers) Single-pass honing tools: electroplated diamond honing reamer and sintered honing reamer Precision bore finishing Used on Vertical Honing Machines Pack: Cartons and bubble wrap Sample: No free samples are provided FOB Port: Shanghai Qingdao Guangzhou
Models: RNMN solid CBN, RCMX soilid CBN, PCD notching tools, PCD engraving tools Applications of PCD inserts, solid cbn : high speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls Specification: 1ã??PCD and PCBN Tools for Rolls Machining Moresuperhard solid CBN inserts and PCD tools for machining high hardness rolls, cast iron roll, high-speed steel (HSS) roll, Ni-Cr alloy cast iron roll, chilled cast iron roll, threaded steel roll, cast iron rolls, cast steel rolls, tungsten carbide ring, forged steel cold Rolls. Due to its excellent properties, carbide rolls are widely used in the steel industry and their hardness is very high. For the machining of cemented carbide rolls, CBN/PCD Inserts can effectively replace the grinding process to improve production efficiency. The roll is the main workpiece and tool that makes the metal continuously plastically deform on the rolling mill. The roll is mainly composed of three parts: roll body, roll neck and roll head. The roll is the intermediate part of the roll that actually participates in rolling the metal. Has smooth cylindrical or grooved surfaces. Rollers are almost universally used in nearly every manufacturing process in the world. The roller is the main part of the rolling machine, with the pressure which come from the rolling roller to roll the steel. 2ã??The specifications size of PCD tools, solid CBN inserts for machining roll - Solid CBN inserts for Rolls Machining As a PCBN inserts manufacturer and exporter in China, More Superhard's PCBN inserts have excellent performance in processing gray cast iron,nodular cast iron,hardened steel and material, sintered metal,and processing work piece surface is highly polished and very durable. Solid CBN iinserts rough machining high Ni-Cr alloy cast iron rolls, semi finishing chilled cast iron rolls, finish turning forged steel cold rolls, turning tungsten carbide rings and hss rolls, etc - PCD Notching Tools, PCD Boring Cutter for Roller The PCD notching tools, pcd boring cutters are made by PCD blanks (E6) brazing on the tungsten carbide body. Most common is full face pcd notching tools. PCD boring tools are used for machining various of tungsten carbide rollers. PCD tips for carbide roller notching.
Dibutyl Phthalate CAS . 84-74-2 Wholesale & Bulk This product is a plasticizer with strong solubility to various resins, It can also be used in the manufacture of paints, statins, artificial leather, printing inks, safety glass, cellophane, dyes, insect repellent solvents and fixatives, fabric lubricants and rubber softeners. Dibutyl Phthalate CAS Number 84 74 2 Product Name Dibutyl Phthalate Multiple Names Dibutyl Phthalate; DBP; Butyl Phthalate; Di-n-Butyl Phthalate; Phthalic Acid Di-N-Butyl Ester; Benzene-1,2-Dicarboxylic Acid Di-N-Butylester; Dibutyl Benzene-1,2-Dicarboxylate; Dibutyl-O-Phthalate; Dibutyl Phathalate. CAS No. 84-74-2 EC No. 201-557-4 MF No. C16H22O4 MW No. 278.346 Specification of Dibutyl Phthalate CAS No. 84-74-2 Assay Item Standard Form Liquid Color APHA: 10 Boiling Point 340 °C (lit.) Melting Point -35 °C (lit.) Density 1.043 g/mL at 25 °C (lit.) Freezing Point -35â?? Advantage of Dibutyl Phthalate CAS No. 84-74-2 1. Colorless transparent oily liquid with slight aromatic smell. Soluble in common organic solvents and hydrocarbons. 2. It can give good softness to products. Because of its relatively low price and good processability. 3. It is prepared by esterification of phthalic anhydride and n-butanol. As one of bulk chemical companies, we will do our best to meet all the needs of customers.
PCD/PCBN milling cutters features: The cutting edge adopts laser technology, the cutting edge is sharp, and the cutting is light and suitable for high-speed occasions. PCD of medium grain size has both abrasion resistance and chipping resistance, and excellent overall performance. Diameters of the same specification, different cutting edge lengths. The cutting edge over-center design can be used for axial feed milling similar to drilling. Optimize the groove shape to achieve a higher dynamic balance level. The small R angle and chamfering of the cutting edge effectively increase the durability of the tool. Applications of PCD end mill, cbn end milling, mill for gearbox bottom: Application industry: 3C, automotive, aerospace, etc. Application materials: non-ferrous metals such as aluminum, magnesium, titanium, silicon; fiber materials, insulating materials, plastics, composite materials, etc. Advantages of PCD end mill, cbn end milling, mill for gearbox bottom: Performance advantages of PCD/PCBN milling cutters With ultra-high hardness and super wear resistance; Stable performance and long tool life; High processing efficiency and low cost; High surface finish can be obtained; High conductivity, good toughness. Forming slot milling cutters have been successfully used in slot milling. Multiple slots can be formed and milled at one time, which reduces the use of tools and the number of tool changes, and greatly improves the processing efficiency. The water outlet design in the tool center can effectively reduce the processing heat in the cutting area, reduce tool wear and make the tool have a longer processing life. Pack: Cartons and bubble wrap Delivery Time: Seven to ten days Sample: No free samples are provided FOB Port: Shanghai Qingdao Guangzhou
Description: Ceramic grade tools are typically classified into three general categories: oxide, nitride, and matrix ceramics. Oxide ceramics are alumina-based and are generally used in roughing and finishing applications of the cast and gray irons. Increasingly, oxide ceramics are being used in dry machining applications at high speeds. This is due to the advancements within materials science, including the incorporation of whisker-based materials. Nitride ceramics exhibit extremely high fracture toughness and are used for roughing and semi-roughing of cast irons under harsh conditions, such as when there is considerable starting and stopping that would typically increase fracturing. CMCs contain ceramics mixed with other hard materials like cemented and titanium carbides. They can also contain reinforcing whiskers and other materials to increase wear resistance and toughness under hot machining conditions. These are commonly referred to as SiC-whisker reinforced. Alumina reinforced with SiC whiskers is the toughest and most resistant to thermal shock of the oxide-based ceramics due to the extremely high tensile strength of the SiC whiskers. It offers the additional benefit of being able to be run without coolant, thus making dry machining a common application while also being able to offer an increase in machining rates up to 800%. Applications of Ceramic insert, Ceramic Cutting Tools : 1. Auto parts processing 2.Bearing machining 3.Hard cast iron processing 4.Other fields 5.Bearing machining
