Description: Trimmer 3323, 1/4" Square Single Turn Cermet Potentiometer, Top Adjust 3323P, 3323C, 3323R, Side Adjust 3323S, 3323W, 3323V,3323D Features: Standard Resistance Range: 10�© - 2M�© Resistance Tolerance: �±5%, �±10% Absolute Minimum Resistance: â?¤1% R or 2�© Contact Resistance VariationCRV: â?¤1% or 2�© Insulation Resistance: R1 1G (500Vac) Withstand Voltage: 707Vac Effective Travel: 250 Standard Packaging: 50pcs, per tube
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 4 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
Product Description It is a kind of tankless, lager-caliber tube and low-pressure solar water heater system with the following features: Capacity: The system contains 4-8 pieces of vacuum tubes as one unit, with each tube capacity of 16 liters of water. this one is 3 pieces of vacuum tubes as one unit. Tankless: Inside each tube, there is a high-temperature-resistant and corrosion-resistant stainless-steel cylinder made of food-grade 304/316 material, so the solar heater does not require a water tank like other products in the market, thus saving space. Pressurized mode: the heater is pressurized. It is connected to the tap-water supply system and on the other side it is connected to the shower head in the bathroom, so the pipeline is relatively simple, and the installation and maintenance are also simple and convenient. Flexible installation position Because this water heater is connected to tap-water supply system(pressurized), it can be installed anywhere for buildings, such as on the ground, the roof, the balcony, the terrace etc., whether high-rise building, multi-story building, bungalow or villa. Installation method: vertical, horizontal, inclined etc. installation Limescale prevention: Pre-filter as a standard feature gives an effective limescale prevention solution to avoid any potential worry. Excellent insulation: Each tube is equivalent to a thermos bottle, which has good insulation performance, and there is air between the steel cylinder and the glass tubes, which also provides the added thermal insulation. and the tube openings are also insulated by good materials, ensuring optimal heat retention. Based on our experiments conducted on the rooftop of an eight-story building, with daytime temperatures reaching 7C and nighttime temperatures dropping to -3C or -5C, it is observed that when 15C water was injected at 9 AM, the water temperature ranged from 51C to 64C at 17:00 PM. The following morning at 8 AM, the water temperature ranged from 42C to 47C, and by 17:00 PM, the temperature of the hot water reached 85C. The highest energy efficiency: due to its large area of absorption of sunlight, it is with good energy efficient whose hot water outlet is the highest. Automatic anti-freeze function: when the temperature falls below 5 C, the system will automatically activate the anti-freeze electric heating feature. optional devices: electric auxiliary heating pump station, gas water heater, electric water heater can be added to our heater system as auxiliary components to be used if weak or lack of sunlight. Customers can choose one out of above-mentioned three.
#Characteristic: 1. Ideal for high AC current applications, such as CRT deflection for R-F generators and pulse-forming networks. 2. Temperature Coefficient is negative and variety linear over the operation temperature. 3. Coated with flame retardative epoxy resin which provides from humidity and mechanical damage Specifications: Operating Temperature: -40 TO + 85 Rated Voltage: DC 1000V, 1250V, 1500, 1600V and 2000V Capacitance Range: 0.001 TO 0.15Mfd Capacitance Tolerance: ±5%, ±10% Dissipation Factor: 0.1% (20, 1KHz) Insulation Resistance: 25000M�© (CR 0.1µF) (20, 1min) 2000s (CR>0.1�=µF) (20, 1min)
Characteristic 1.Good reputation in use with consumer & industrial electronics. 2. Optimum for automatic insertion due to their small size and lightweight. 3. Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance. Specifications: Operating Temperature:-40â?? TO + 85â?? Rated Voltage:DC 100V,250V,400V,630V,1000V,1200V Capacitance Range:0.001 TO 0.22�µF Capacitance Tolerance:�±5%, �±10%, �±20% Insulation Resistance:0.1�µF 30,000 M�© min, >0.1�µF >15000 M Dissipation Factor: 0.1 (AT 1KHZ) Dielectric Strength:200% of rated voltage for 5 sec.
#Characteristics: 1. High reliability at high current stress. 2. Self-healing properties. 3. Flame retardant plastic case and epoxy resin. 4. Low losses, high dv / dt capability. 5. High moisture 主resistance. 6. High stability of capacitance and long life Specifications: Operating Temperature:-40 TO + 85 Rated Voltage:250, 400, 630VDC Capacitance Range:0.0047 TO 3.9 µF Capacitance Tolerance: ±5%, ±10% Insulation #Resistance: Câ?¦0.33uF ; IR 50000MOhm C>0.33�µF ; IR 15000MOhm Dissipation Factor:0.1% max. at 1KHz, 20â?? Dielectric Strength:160% of rated voltage for 60s
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 1.6±0.5N Strong Features Type: SMD surface-mounted tact switch Operating Life cycles: 50000 Flux proof, Reflow solderable. Sharp click feel with a positive tactile feedback Highly reliable contacts sealed structure. Larger top surface of the stem improve mounting speed.
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.15�±0.05mm Operating Force:2.3�±0.3N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 200000 IP65 equivalent to IEC/EN 60529 Miniature tact switches, With high contact reliability Fixing poles of the cover available, Compact-sized, Side actuated PCB-base structure, RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.2�±0.1mm Operating Force:1.6�±0.5N, 2.6�±0.5N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 20000,30000,40000,50000 Sharp feeling, High contact reliability Low-profile and light weight Compact size of 3x3x0.65mm Contributes to downsizing and lighter weight of application devices. Reflow solder able , Rated to RoHS and REACH standard
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.2 ±0.1mm Operating Force:1.6 ±0.5N, 2.6 ±0.5N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 20000,30000,40000,50000 Low-profile , Reflow solderble Quiet operation and definite clicking feel Improve mounting density of components on PC board Contacts are completely sealed, enhancing reliability. Available with ground terminal for electrostatic discharge RoHS and REACH compliant
Main Specifications Operating Temperature Range: -30 to +85 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 100m Full Travel: 0.15±0.0.1mm Operating Force: 1.6±0.3N Strong Features Type: SMD surface-mounted tact switch Operation Life cycles: 200000 Positive tactile feedback, Dust proof and Flux proof High contact reliability, Low-profile and light weight Contributes to downsizing and light weight of application devices
Main Specifications Operating Temperature Range: -40 to +90 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 1.3�±0.2mm Operating Force: 1.6�±0.5N Strong Features Type: DIP with ground terminal tact switch Operation Life cycles: 100000 Soft feeling High operating force Steady and low contact resistance Compatible with most surface mount soldering processes Improved operation by using a larger push plate RoHS and REACH compliant
Various models can be customized 1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant material in smelting. 2. Silicon carbide can also be used as abrasive, which can be used to manufacture abrasive tools, such as grinding wheels, oil stones, grinding heads, etc. 3. Silicon carbon is a new type of reinforced steelmaking deoxidizer and an ideal thermal insulator. It is used for deoxygenation. Using a dose of 14kg/t can reduce power consumption by 15-20kw/h and time by 15-20 minutes per furnace to increase productivity to 8-10%.
Main Specifications Operating Temperature Range: -30 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 100m Full Travel: 0.15±0.05mm Operating Force:1.8�±0.5N Strong Features Type: 2 Pin DIP tact switch Operating Life Cycles: 50000 Good drop resistance Improve mounting density of components on PC board. Reflow solderable Contacts are completely sealed, enhancing reliability RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 2.6±0.5N Strong Features Type: DIP tact switch with LED LED Color: Red, Blue, White, Yellow, Green Operation Life cycles: 500000 Good tactile feedback Laser etched symbol with LED illumination A variety of housing, cap options available for selection RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Fore: 2.0±0.5N Strong Features Type: DIP tact switch with LED LED Color: Red, Blue, White, Yellow, Green Operating Life cycles: 500000 Models with ground terminals are available of protection against static electricity. Some of output terminals can be also used as jumper leads to make the circuit design easy. RoHS and REACH Compliant
Main Specifications Operating Temperature Range: -20C to +70C Rated Current and Voltage: 50mA. / 12VDC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 1.0±0.3N1.6±0.5N2.6±0.5N Common Height:3.8mm,4.3mm,5.0mm,6.0mm,7.0mm The HeighHcan be set at the full discretion of the consumer. Strong Features Type: DIP tact switch Operation Life Cycles:40000,50000,60000 Positive tactile feeling Various Knobs for low or high profile actuations Cambered terminals to ensure self retention Vertical and horizontal operating direction RoHS and REACH compliant
Versatile for All Terrains: Suitable for diverse outdoor terrains and conditions, making them ideal for hunting. Waterproof: Built with waterproof construction to keep your feet dry in wet environments. Reliable Grip: Equipped with a rubber outsole for excellent traction and stability on various surfaces. Secure Lacing: Comes with nylon laces for a secure and adjustable fit. Memory Foam Footbed: Provides comfortable cushioning and support for extended wear. Camouflage Design: Faux tree camouflage material aids in concealment during hunting activities. Thinsulate Insulation: 200G Thinsulate offers warmth in cold weather. 7'' Height: Offers ample ankle support and protection during outdoor adventures.
1. 8'' Height: Provides ample ankle support and protection. 2. Insulated with 400G 3M Thinsulate: Offers excellent warmth in cold weather. 3. 12 Sizes Available: Ensures a perfect fit for different foot sizes. 4. EVA Sole: Lightweight and comfortable for extended wear. 5. Padded Collar and Tongue: Enhances comfort and reduces friction. 6. Waterproof Construction: Keeps your feet dry in wet conditions. 7. Camouflage-Covered EVA Midsole: Adds a stylish touch and enhances comfort. 8. Removable and Washable Insole: Allows easy cleaning and maintenance for a fresh feel.
Refractory fibers with Silica Sol as the main raw material are widely used as thermal insulation materials in industrial furnaces and other thermal and industrial equipment due to their excellent energy saving and high temperature resistance Other amorphous refractories and ceramic products with silica sol as a bond because they will not bring in a variety of low melting point oxides improve the use of performance and have the advantages of high release strength high temperature volume stability high temperature thermal shock resistance etc Si02 2931 Na2O 05 Specific gravity25 119121 PH value25 9105 Viscosity25 65 Particles SizeNM 1020 Shelf life 1 year appearance transparent
