REFINED CORN OIL PARAMETER CHEMICAL SPECIFICATIONS Free Oil Acidity (Expressed OS Oleic Acid) 0.30% Max Refractive Index at 40C 1.466-1.470 Peroxide Value (Meg. Gr/Kg) 1.0 Max Saponification Value 189-195 Iodine Value 120-143 Density at 20C 0.909-0.925 Unsaponifiable Matters 1.5% Max Appearance Clear Soap Test 0.005% Max Insoluble Impurity in Ether 0.05 Max Volatile Matter at 105C Test Negative Mineral Oil Test Negative Sesame Seed Oil Test Negative Cold Test after 24 Hours Negative FF (Iron) 1.5 Max CU (Copper) 0.1 Max PB (Lead) 0.1Max
EXTRA VIRGIN OLIVE OIL Myristic Acid C14:0 0.03 Same as IOC Same as IOC Palmitic Acid C16:0 7.50 20.00 Same as IOC Same as IOC Palmitoleic Acid C16:1 0.30 - 3.50 Same as IOC Same as IOC Heptadecanoic Acid C17:0 - 0.30 Same as IOC Same as IOC Heptadecenoic Acid C17:1 0.30 Same as IOC Same as IOC Stearic Acid C18:0 0.50 5.00 Same as IOC Same as IOC Oleic Acid C18:1 55.00 - 83.00 Same as IOC Same as IOC Linoleic Acid C18:2 3.50 - 21.00 Same as IOC Same as IOC Linolenic Acid C18:3 - 1.00 Same as IOC Same as IOC Arachidic Acid C20:0 - 0.60 Same as IOC Same as IOC Gadoleic Acid (eicosanoic) C20:1 0.40 Same as IOC Same as IOC Behenic Acid C22:0 0.20 Same as IOC Same as IOC Lignoceric Acid C24:0 - 0.20 Same as IOC Same as IOC Trans Fatty Acid Content % C18:1T �¨ (see foot note) 0.05 Same as IOC Same as IOC
REFINED SOYBEAN OIL PARAMETER CHEMICAL SPECIFICATIONS Free Oil Acidity (Expressed OS Oleic Acid) 0.30% Max Refractive Index at 40C 1.466-1.470 Peroxide Value (Meg. Gr/Kg) 1.0 Max Saponification Value 189-195 Iodine Value 120-143 Density at 20C 0.909-0.925 Unsaponifiable Matters 1.5% Max Appearance Clear Soap Test 0.005% Max Insoluble Impurity in Ether 0.05 Max Volatile Matter at 105C Test Negative Mineral Oil Test Negative Sesame Seed Oil Test Negative Cold Test after 24 Hours Negative FF (Iron) 1.5 Max CU (Copper) 0.1 Max PB (Lead) 0.1Max
Wheat Flour -25 Kg Bag Specification of Wheat Flour Moisture - 13-14% Total Ash -0.50- 0.56% Water Absorption - 58-60% Dry Gluten - 10-11.5% Wet Gluten - 26-30% S.V.- 19-23 ml Alcoholic Acidity- 0.062-0.068% max Acid Insoluble Ash - 0.018-0.05% max Carbohydrates -75.92 gms Protein -10-11%
LONG GRAIN WHITE RICE . SPECIFICATIONS: White rice 5% broken Broken: 5% max Moisture : 14.5% Admixture: 0.1% Chalky kernels: 5% Red and streaked kernels: 1.5% Yellow kernels: 0.5% Damaged kernels: 0.5% Paddy grains: 15% Milling degree: double polished
refined white ICUMSA 45 sugar. SPECIFICATION Parameters Colour (ICUMSA Units) under 45 by method 9 Polarisation - 99.8% Minimum Moisture - 0.05% Max Reducing sugars - 0.04% Max Glucose & Invert Sugars (mg) - 112mg Max Ash Content - 0.05% Max Solubility - 99.99% Sulphur dioxide (ppm)15 ppm Max Granulation Super Fine or Fine Radiation
We are ready to sell red copper wire scrap millberry with low copper scrap price.. Specification: Copper WIRE SCRAP, (Millberry) 99.99% at a purity of 99.98% min. 99.99%Max. COPPER: 99, 9% CARBON: 0.03% COBLET:
Copper Wire Scrap, (Millberry Copper) 99% High Purity. Specifications 1.High quality with best price 2.Well reputation 3.Factory with strong supply ability 4. Prompt shipment Copper Wire Scrap, (Millberry Copper) 99% High Purity Wire diameter: 0.30mm, 0.25mm, 0.20mm Weight/spool: 3 kg, 5 kg, 7 kg, 15 kg, 20kg Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2 Application:copper scrap wire can be used on low speed wire cutting machines like Agie charmilles, Sodick, Packing: shrink wrapped+carton+pallet to resist moisture, quake, and corrosion.
Product Specifications Product Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension 914mm x 914mm x 12mm (approx.) (36â?³ x 36â?³ x 0.5â?³) Weight of each sheet 125 kg (+/- 1%) Net Weight of each pallet 2mt (metric ton) (+/- 1%) Min. Weight of each container 20mt (approx.) Gross Weight of each container 22.20mt (approx.) Packaging Palletized (Banded by Aluminium Bands)
Product Specifications Product - Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension - 914mm x 914mm x 12mm (approx.) (36 x 36 x 0.5) Weight of each sheet- 125 kg (+/- 1%) Net Weight of each pallet - 2mt (metric ton) (+/- 1%) Min. Weight of each container - 20mt (approx.) Gross Weight of each container - 22.20mt (approx.) Packaging - Palletized (Banded by Aluminium Bands)
Product Specifications Product Copper Cathodes Grade A (Electrolytic Copper Grade) Standard Cu Cathode, purity 99,99% Dimension 914mm x 914mm x 12mm (approx.) (36â?³ x 36â?³ x 0.5â?³) Weight of each sheet 125 kg (+/- 1%) Net Weight of each pallet 2mt (metric ton) (+/- 1%) Min. Weight of each container 20mt (approx.) Gross Weight of each container 22.20mt (approx.) Packaging Palletized (Banded by Aluminium Bands)
Aluminum scrap aluminum scrap cans Tape: according to the purity of aluminum, we can supply aluminum scrap with purity of aluminum 97%, 95%, 84%. Specification of Aluminum scrap 6063 Si : 0.2-0.6% Fe : 0.35% Cu : 0.1% Mn :0.1% Mg : 0.45-0.9% Cr :0.1% Zn :0.1%
Product Specification Type 6063 Is It Anodised Anodised Al Content 99.7%-99.9% Weight 25kg Fe 0.35% Cu 0.1% Mg 0.45-0.9% Cr 0.1% Si 0.2-0.6%
Aluminum ingot 1. Weight : standard weight or as buyer's option 2. Chemical Composition : Al 3. Item : 99.7% ,99.8% ,99.85% 4. Appearance : silver, silvery white
ALUMINUM INGOT A7 1. Weight : standard weight or as buyer's option 2. Chemical Composition : Al 3. Item : 99.7% ,99.8% ,99.85% 4. Appearance : silver, silvery white .
Molecular Weight 63.55 Appearance Reddish Metal Melting Point 1085 C Boiling Point 2562 C Density 8.96 g/cm3 Solubility in H2O N/A Electrical Resistivity 1.673 cm @ 20C Electronegativity 1.90 Paulings Heat of Fusion 13.26 kJ mol-1 Heat of Vaporization 300.4 kJ ·mol-1 Poisson's Ratio 0.34 Specific Heat 0.39 kJ/kg K Thermal Conductivity 401 W m-1 K-1 Thermal Expansion (25 C) 16.5 m·m-1·K-1 Vickers Hardness 369 MPa Young's Modulus 110 - 128 GPa
Description of fully refined paraffin wax 0.5% oil content Paraffin waxes are derived from crude oil during the production of light (distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 0.5% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less than 0.5% (0.8% for the high welted products) oil and have been hydrotreated or clay treated to remove impurities and decoloration. The resulting waxes are water clear, odorless, and normally food grade. Fully refined paraffin wax below 0.5% oil content is the best and most expensive grade of paraffin wax used in cosmetics or medical and oily papers, it is hard not easy to break, extra white, odorless, transparent and also food industry. Lipstick, cream, oily papers, chocolate are the most usage of fully refined paraffin In other fields of industry like candle making is also possible to use fully refined paraffin wax and the quality will be great.
Oxygen Concentrators. Specifications Oxygen Concentrations 86 to 97% at all settings Pulse mode bolus size 1=12 ml, 1.5=18 ml, 2=24 ml, 2.5=30 ml, 3=36 ml, 3.5=42 ml, 4=48 ml, 4.5=54 ml, 5=60 ml, 5.5=66 ml, 6=72 ml Continuous flow settings 0.5 LPM, 1 LPM, 1.5 LPM, 2 LPM Sound level â?¤ 43 dB at pulse setting 2 Size 11.5 in x 10 in x 6 in (29.2 cm x 25.4 cm x 15.2 cm) Weight 10 lbs (4.5 kg) with battery Operating temperature 41�° to 104�°F (5�° to 40�°C) Storage temperature -4�° to 140�°F (-20�° to 60�°C) unit only Altitude Up to 10,000 ft. (3048 m) Filtration Internal bacteria filter DC power Input 11.5 to 16 VDC 18 A max Output 19 VDC 7.9 A max AC power Input 100 to 240 VAC, 50/60 Hz, 1.7 A max Output 19 VDC 7.9 A max Power consumption 150W while charging, 120W while not charging Alarm types Low oxygen purity, No breath, High breath rate, No flow, Low battery, Depleted battery, Wrong battery, System technical fault Lithium Ion battery 14.4 VDC, 6600 mAh (LiIon), 1.5 lbs (0.7 kg), charge time is approximately 2 to 3 hours per battery from fully discharged
Oxygen concentrators. Features Light Weight 16kg American Make Valve & Motor Sieve from France Quiet Operation Compact Low power - Average 330 watts Stainless Steel Outlet Extensive Ventilation Can be used without air conditioning. 0-51pm up to 95% pure oxygen Specifications Stainless Steel Oxygen outlet will not break during use. Flow Indicator Lockable flow Controller, in recessed cavity. Reduced chance of accidently changing flow during use ON/OFF Switch when ON, is inside the machine body, reduced chance of accidently shutting off the machine Reset switch on front panel Front panel indicators for easy understanding of machine status. Useful To Strengthen your heart, reducing the risk of heart attacks To Detoxify your Blood, Raise Energy Levels To Improve Strength & Build Endurance To Revitalize the skin To Prevent disease, relieve hangovers To Help fight off depression
Oxygen Concentrators 5 LPM (Single Flow) Philips respironics oxygen concentrator also known as 10 LPM (Single Flow) is a 25.00 kg stationary oxygen concentrator for home use which provides continuous oxygen flow up to 5 Litres Per Minute (LPM). Technical Specifications Physical Specifications Model :-Oxygen Analyzer Accuracy :- +-3% Max Flow :- 8Lpm Low Battery Voltage Reminder Power of Automatically in 13 Minutes Without Signal LCD Purity Display :- 21% -99.9%