S. No. Testing Parameter Unit Standard Specification 1 Physical Appearance - A clear, colorless to pale yellow, viscous liquid, free from foreign matter 2 Odor - Free from Ammonia smell, characteristics soapy odor 3 Active Matter (using M.Wt 433 g/mol) % 27 - 29 4 Unsulfated Alcohol % 0.7 - 1.1 5 Alkalinity (as NaOH) % 0.19 - 0.32 6 Sodium Sulfate (as Na2SO4) % 0 - 0.6 7 Chloride (as Nacl) % 0 - 0.2 8 1,4 Dioxane (100 % A.M Basis) ppm 0 - 50 9 Iron ppm 0 - 3 10 pH (10% Aq. Soln.) - 11.0 - 13.0 11 Transmittance (10mm cell, 420nm) % 83 Min Price of product : Will be provided on request and pack size Product origin : Tufail Chemical Industries Ltd, Karachi, Pakistan
S. No. Testing Parameter Unit Standard Specification 1 Appearance - A clear to slight hazy, colorless to plale yellow, viscous liquid, free from foreign matter 2 Odor - Free from Ammonia smell, characteristics soapy odor 3 Active Matter (M.W: 299 g/mol) % 28 - 30 4 Unsulfated Alcohol % 0.0 - 0.6 5 Chloride (as NaCl) % 0.0 - 0.2 6 Alkalinity (as NaOH) % 0.13 - 0.26 7 pH (10% Aq. Soln.) - 11.0 - 12.0 8 1,4 Dioxane (100 % A.M Basis) ppm 0 - 5 9 Sodium Sulfate (as Na2SO4) % 0.0 - 0.8 10 Iron Content ppm 0 - 5 11 Transmittance (10mm cell, 420nm) % 83 Min. 12 Acid Value 204 - 208 Standard Specifications of Finished Product Sodium Lauryl Sulfate (29%) S. No. Testing Parameter Unit Standard Specification 1 Appearance - A clear to slight hazy, colorless to plale yellow, viscous liquid, free from foreign matter 2 Odor - Free from Ammonia smell, characteristics soapy odor 3 Active Matter (M.W: 299 g/mol) % 28 - 30 4 Unsulfated Alcohol % 0.0 - 0.6 5 Chloride (as NaCl) % 0.0 - 0.2 6 Alkalinity (as NaOH) % 0.13 - 0.26 7 pH (10% Aq. Soln.) - 11.0 - 12.0 8 1,4 Dioxane (100 % A.M Basis) ppm 0 - 5 9 Sodium Sulfate (as Na2SO4) % 0.0 - 0.8 10 Iron Content ppm 0 - 5 11 Transmittance (10mm cell, 420nm) % 83 Min. 12 Acid Value 204 - 208 Price of product : Will be provided on request and pack size Product origin : Tufail Chemical Industries Ltd, Karachi, Pakistan
Lithium Carbonate Li2CO3 mm 98.5% CAS# : 554-13-2 Packaging : 500 kg bags Physico-chemical properties: Lithium carbonate Li2CO3 98.5 % Min Magnesium (Mg) 0.80 % Max Potasium (K) 0.20 % Max Sodium (Na) 0.35 % Max Calcium (Ca) 0.40 % Max Clorine (Cl) 0.40 % Max Sulfate (SO) 0.50 % Max Carbonate (CO) 79.80 % Max Iron (Fe) % Max Boron (B) 0.10 % Max Humidity 0.19 % Solubility (g/100g) 1.20 �± 0.05 pH 9.0 a 11.60 Density (g/cm3) 2.11 g/cm (at 20�° C) Insoluble solids 0.1 % Granulometry 150 �¼m Organoleptic characteristics: Color White powder Flavor Saline Aspect Finely granulated Smell No smell Available Quantity : 1500 tons/month Origin: Brazil Shipping Terms: FOB Origin Port: Port of Salvador Payment Terms: LC Customs Tariff No: 2836 91 00
LC at Sight, Export , Ethyl Acetate.
Ethyl Acetate : FOB NAVA SHIVA, INDIA
Total Humic Acid 45%~60% Organic Matter 60%~85% pH Value 4~6 Moisture 15%~25% Packaging 1KG Aluminium Foil Bag, 5KG or 10KG Colored Plastic Woven Bag, 25KG Kraft Paper Bag, or According to Customer Requirements.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
Available Lithium Carbonate: Trial: 300MT Max Quantity:1,000 Incoterms: CIF CHINA Payment SBLC Contract 12 months Origin: China
Hydrochloric acid: Purity: 37% UN1789 HS Code: 2806100000 CAS: 7647-01-0 Packaging: 1.15 MTs IBC tanks Price: FOB Qingdao Port is 240 USD/MT Payment: 30% IN ADVANCE +70% BALANCE Price validity: 5 days. 20 FCL can hold 20 IBC tanks, 23 MTs of hydrochloric acid IBC tank dimensions: 1200*1000*1160mm IBC tank weight: 57kg
Sodium Humate is the salt of humic acid. It is manufactured commercailly by alkaline extraction of brown coal (lignite) Leonardite to be used mainly as a soil conditioner. The extraction is performed in water with the addition of potassium hydroxide (NaOH), sequestering agents and hydrotropic surfactants. Appearance: powder/flake/granule Size: 80mesh/3-6mm/1-3mm Humic Acid: 40%/50%/55%/60%/70% Water Solubility: 60%/65%/70%/85%/98% Moisture: 15% Packaging: 25kg/kraft paper bag or customized
We can supply Muriate of Potash (MOP) Dark Red Original in large quantities. MOQ is 25MT only. Please get in touch with us for shipment arrangement
I am a supplier from China. We have an official export quota of more than 1 million tons per year and can produce according to the needs of buyers. We hope to develop long-term and stable cooperation.Buyer please provide complete technical data sheet, quantity, shipping terms, destination port, payment terms
Mn3O4 powder / Manganese tetraoxide / Trimanganese tetraoxide
CAS: 141-82-2 Specs: white crystals purity: 99.t% min. In 25kgs paper bags. Used for used for spices, adhesives, resin additives, electroplating polish, etc. Used in the production of barbiturates and other drugs.
Everflon FEP Aqueous Dispersion Everflon FEP D50 is an off-white aqueous fluorinated ethylene propylene (FEP) dispersion stabilized with a non-ionic surfactant. It is a general-purpose dispersion that can be used to impart some the unique properties of FEP to end products that would be difficult to make using traditional melt extrusion processes. It can be used to coat or impregnate porous structures, or to make thin films. It can be coated and melt bonded to polytetrafluoroethylene (PTFE) resin or used as a hot melt adhesive. The FEP resin in Everflon FEP D50 is a melt flowable thermoplastic, providing superior properties typical of fluoroplastic resins: retention of properties after service at 204 °C (400 °F) and useful properties at -240 °C (-400 °F). Everflon FEP D50 aqueous dispersion provides: Inertness to nearly all industrial chemicals and solvents Stability at high temperatures Excellent dielectric properties Excellent weatherability Application Heat-sealable top coatings for PTFE-coated fabrics for belting, circuit boards, architectural fabrics, and electrical insulation Cast film for capacitor dielectrics or chemical barriers Hot melt adhesive for PTFE, PFA, and FEP parts Metal coatings
Product name: Decanoic acid Other name: Caprynic acid CAS: 334-48-5 Appreance: colorless to light yellow liquid Molecular formula:C10H20O2 EINECS 206-376-4 Melting point: 27-32 °C (dec.) (lit.) Boiling Point: 268-270 °C(lit.) Density: 0.893 g/mL at 25 °C (lit.) FEMA: 2364
Ethyl Oleate 99%min CAS: 111-62-6 C20H38O2 EINECS 203-889-5 USAGE: Used for the preparation of surfactants and other organic chemicals, as well as for spices, medicinal excipients, plasticizers, and ointment matrices.
Everflon® PTFE Dispersion D60 is a milky white aqueous with non ionic surfactant. It provides inertness to nearly all industrial chemicals and solvents;stability at high temperatures;excellent dielectric properties;lowest coefficient of friction of any solid materials; excellent weatherability and no-stick characteristics, using temperature is between -240 °C (-400F) to 260 °C (500F).