Convert waste plastic into fuel oil of Doing oil pyrolysis machine which can turn waste plastic into fuel?www(dot)china-doing(dot)com How to convert waste plastic into fuel oil ? Doing waste plastic into fuel oil pyrolysis machine working process as follows:www(dot)china-doing(dot)com 1. Put raw materials into reactor by auto-feeder, then heat the reactor with any one of the following fuel materials: coal, wood, natural gas, oil. Do not stop heating the reactor, when the temperature reaches nearly 250 degree Celsius, waste tyre will be transferred to oil gas.www(dot)china-doing(dot)com 2. The liquid oil will be cooled by condenser from oil gas and then collected by oil tank. Third, the exhaust gas which can not be cooled in normal pressure will be recycled to heat the reactor. In this way, you can not only saving energy, but also protecting environment. 3. Smoke produced by processing the plastics can achieve national emission standard through dual desulfurization and dusting removal device. 4. After you get oil, the temperature will be low, at this time, carbon black will be discharged automatically.www(dot)china-doing(dot)com Last, when the temperature falls to 100 degree Celsius, After all these steps, you can start another batch.
z
The pyrolysis of plastics waste is a new green technology to recycle plastic and we Doing group have applied this technology in our plant. By using the plastic to fuel oil pyrolysis plant, finally you can get oil from the plastic waste, and you can also get the carbon black and combustible gas, all of which have a wide range of applications. www(dot)wastetireoil(dot)com According to the demands of different customers, we provide three types of plastic to fuel oil pyrolysis plants for customers, including batch operating plant, semi-automatic operating plant and auto continuously operating plant. Each set of plant is www(dot)wastetireoil(dot)commanufactured with advanced technologies and has the features of high efficiency and low cost. The following are some technologies applied in the plant: 1. The first in the world to have created the new heating structure that combines the advantages of burning the reactor directly and heating the main reactor by hot air. 2. The technology of avoiding the reactor of being burnt through by reforming the furnace, which will lengthen the life span of the main reactor for 5 to 8 years and save quite amount of money for customers to maintain and update the plant. 3. The technology of improving the oil yield by another 5% compared with the traditional plant. 4. The technology of guaranteeing 100% safety in the whole working process. 5. The technology of ensuring the released gas reach the European pollution control standards. z
RD3304 4-Stroke Motor Engine Oil Additive 1.DESCRIPTION RD3304 has been developed to formulate 4-stroke gasoline engine oils. RD3304 is formulated with excellent detergent, dispersant and other additives. So the engine oils formulated with RD3304 have outstanding detergency and lubricative, low ash and anti-rust performance, etc.The following performance levels can be achieved with oils formulated with RD3304. 2. THE RECOMMENDED DOSAGE PERFORMANCE LEVEL DOSAGE (wt%) CF-4 6.8 SJ/CF 5.5 SG/CD 4.8 SF 4.5 3.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Calcium, m% 3.7 SH/T 0270 TBN, mg KOH/g 105 SH/T 0251 Zinc, m% 1.5 SH/T 0226 Phosphorus, wt% 1.3 SH/T 0296 Molybdenum,wt% 0.12 Spectrophotometry 4.PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
RD5596 2-Stroke Gasoline Engine Oil Additive Package FB, FC, FDAfton 2235 1.DESCRIPTION RD5596 has been developed to formulate two-stroke gasoline engine oils. RD5596 is formulated with excellent detergent, dispersant and other additives. So the engine oils formulated with RD5596 have outstanding detergency and lubricative, low ash and antirust performance, etc. The following performance levels can be achieved with oils formulated with RD5596. 2.THE RECOMMENDED DOSAGE PERFORMANCE LEVEL DOSAGE (wt%) FB 2.5 FC 4.1 FD 6.2 3.CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash point (COC) °C 180 GB/T 3536 Kinematic Viscosity (100°C), mm2/s Report GB/T 265 Calcium, wt% 0.76 SH/T 0270 Nitrogen, wt% 0.85 SH/T 0224 TBN,mgKOH 24 SH/T 0251 Sulphated ash 2.6 4.PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
T830C Pour Point Depressant for Intermediate based oil 1. DESCRIPTION The product is an orange yellow transparent thick liquid. It shows good pour point depression ability ,increasing viscosity ability and improving the viscosity index. It can substitute for traditional pour point depressant. 2. APPLICATIONS The products are used primarily for various industrial oils and engine oils. 3. THE AMOUNT USED REFERS The dosage is from 0.3% to 1.0%. 4CHARACTERISTICS ITEM TYPICAL VALUE TEST METHOD Flash Point (open cup), °C min 135 SH/T 3536 Kinematics Viscosity (100°C), mm2/s min report GB/T 265 Ash, m% max 0.20 GB/T 508 Pour Point Depression Degree, °C min 15 GB/T510 Water,m% max 0.05 GB/T 260 5. PACKING AND STORAGE The packing, marking, transportation, storage and delivery acceptance should meet the requirements of SH/T0164. It is packed in 200 liter metal drum. Store in dry, clean and ventilating warehouses.
1.Omega 3 fish oil softgel 2.EPA/DHA 18/12 40/30 50/25 3.GMP,ISO22000.BRC,HACCP,BRC assured 4.OEM service and free samples.
.Omega 3 fish oil softgel 2.EPA/DHA 18/12 40/30 50/25 3.GMP,ISO22000.BRC,HACCP,BRC assured 4.OEM service and free samples.
1.Omega 3 fish oil softgel 2.EPA/DHA 18/12 40/30 50/25 3.GMP,ISO22000.BRC,HACCP,BRC assured 4.OEM service and free samples. E3, Ronald House, Fenton Way, Chatteris PE16 6UP, UK
Waste plastic to oil machine cost can pyrolysis down of waste plastic to energy. Plastic pyrolysis to oil machine is an industry conducted pyrolysis . In the Scrap plastic pyrolysis to oil machine , the long- chain polymers break down into smaller chains of hydrocarbon gases and pyrolysis oils. Heat required for the catalytic reaction .www(dot)wastetireoil(dot)com Every year a large amount of plastic waste is discarded in the Earth. These plastic to with stand the natural process of decomposition of all. According to statistical analysis , Waste plastic generated more than 250 million tons each year. A lot of these plastic garbage is used to fill the land , which in turn may result in a waste land to create a major threat to the environment in the future. People use and dump waste plastics almost every day. Waste plastic to oil Solution: Waste plastic to oil machine cost www(dot)wastetireoil(dot)com Usage: Waste plastic Recycling to Fuel Oil Input: Different plastic type, (PP,PE,PS,ABS) etc. Output: 20%-95% fuel oil, 30%-35% carbon black , 5%-8% gas. Heating material: coal/wood/fuel oil/natural gas Machine cover area: usually 400 square meters. Reactor material: Q245R Boiler plate.
Brief description: Sesame oil 1.No-GMO sesame 2.Halal,BRC,Kosher,Haccp,ISO,FDA 3.OEM brand can be accepted. 4.About 25days delivery Packaging Details: 150ml, 250ml, 500ml, 620ml, 1.86L, 2L(Iron), 3L, 5L, 5kg, 25L Delivery Detail: 25days after the order confirmation . Color:Bright golden color with shinny surface.Bicycle Flavor:Tastes stronger, delicious and peanut aroma. Purpose:It's primarily used for cooking (it gives a great boost to any Asian stir-fry, noodle dish, or soup Ingredient:Sesame oil Serving Suggestion:Our sesame oil can also be used as a flavoring, though the flavor is mild. It's also more suitable for cooking than dark sesame oil. Frying oil and salad oil are generally used for making fried food at home.But professional â??Edomae (Edo-era type)â?� Tempura (Japanese fritters) chefs prefer to use sesame oil. The aroma of sesame seeds makes Tempura tastier. When making fried food at home, just adding 30% sesame oil to your frying oil makes the dish more fragrant Nutrition information: typical values per 100g Energy 3700KJ Protein 0g Carbohydrate 0g Sodium 0mg Fat 100g Welcome to contact with us at info @ jolionfoods.com
We supply Fuel oil sourced from world class refineries inoder to meet the customer requirement & maintaining the quality ... Fuel Oil of various grades are available as below CST 180 CST 380
Made from the first press of mustard seeds in the traditional way The best mustard seeds are slowly crushed in a temperature controlled environment This retains pungency and natural properties enhancing the taste of the food Its high pungency levels also help stimulate your appetite Essential for keeping pickles fresh for a longer duration while retaining their traditional flavour.
Made from the first press of mustard seeds in the traditional way The best mustard seeds are slowly crushed in a temperature controlled environment This retains pungency and natural properties enhancing the taste of the food Its high pungency levels also help stimulate your appetite Essential for keeping pickles fresh for a longer duration while retaining their traditional flavour.
100 percent certified organic mustard oil, made from the finest quality mustard seeds sourced from certified organic farms across India, 100 percent cold pressed oil Grown without use of any chemicals, pesticides or insecticides Cultivated with controlled organic farming practices.
Canola oil is light yellow and has neutral taste of brassica plants. In general, canola seeds pressed either employing traditional cold-pressing methods or in large scale, by hexane extraction method. Color, taste, and odor of cold-pressed oil indeed more pronounced than that of refined oil.
Oreal canola oil is one of the most versatile cooking oil. You can use it in number of dishes and cooking methods U.S. FDA has approved canola oil as the healthiest and nutritional cooking.