Cutting Width (in.) 42 inches Horsepower (HP) 19.5 hp Mower Size Small Number of Cylinders Single Cylinder Power Type Gas Size of Yard 1 - 2 Acres Engine Make Kohler Engine Riding Mower Features Adjustable Cutting Height Assembly Required Yes CA (CARB) Compliant Not CARB Compliant Commercial / Residential Residential Cutting Options Side-Discharge Deck Material 12 Gauge Steel Deck Type Stamped Drive Type Rear-wheel Drive Engine Displacement (cc) 541 Fuel Tank Capacity (gallons) 3 gal Included with Riding Mowers Battery(s),Engine Oil Lawn Mower Type Front Motor Riding Maximum Cutting Height (in.) 4 Maximum Forward Speed (mph) 5.5 Maximum Reverse Speed (mph) 2.5 Minimum Cutting Height (in.) 1.5 Number of Deck Wheels 2 Oil Capacity (oz.) 64 Recommended Oil Type 10W-30 Refurbished No Start Type Electric Terrain Type Flat with Obstacles,Hilly Transmission Type Hydrostatic Certifications and Listings No Certifications or Listings Assembled Depth (in.) 67 in Assembled Height (in.) 43 in Assembled Width (in.) 52 in Front Wheel Size (in.) 15 Mower Deck Width (in.) 42 Rear Wheel Size (in.) 20 Turning Radius (in.) 16
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 12dbi antenna optional with effect distance up to 15m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 8 dbi antenna optional with effect distance up to 6m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 12dbi antenna optional with effect distance up to 15m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 8 dbi antenna optional with effect distance up to 6m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 12dbi antenna optional with effect distance up to 15m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 8 dbi antenna optional with effect distance up to 6m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Our company has achieved milestone in providing a UHF RFID Reader to the clients. This product is a high performance device which can read and write all tags or cards in a long distance. This product is available for variety of read range requirements. This product is the system for passive UHF reading with medium range. Features: Robust Linear Polarised 12dbi antenna optional with effect distance up to 15m* Self-intellectual property FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Support auto-running, interactive and trigger-active work mode Low power dissipation with single + 9 DC Power supply Support RS232, RS485, Wiegand interface Application: RFID Student Management System RFID File Tracking System RFID Vehile Tracking System RFID Vehicle Parking System RFID Warehouse Management System RFID Truck Monitoring RFID Library Management System RFID Inventory Management System RFID Jewellery Tracking System RFID Physical Efficiency Test Management RFID Waste Management System RFID Asset Tracking System RFID Access Control System RFID Hospitality Management System RFID Garment Tracking System Other Information: Minimum Order Quantity: 1 Piece Optional Support: We will provide SDK with the Product. Also Customized Software Development will be also Undertaken/ Supported
Model: DL-9929XM Product Name: Touch Screen Linear Wear Resistance Testing Machine Test stroke: 0-100mm Test speed: 0-60 times/min adjustable Test object: coating, coating, or other surface treatment Sports mode: electric Fixture self weight: 15g Test load: 250g Counting setting range: 1~999999 times Maximum allowable size of workpiece: 220 * 160 * 50mm Machine size: W480 �? D360 �? H360mm Machine weight; 20kg Power supply: 1 â?® AC220V 2A or specified 2. Introductionï¼? This instrument is suitable for testing the wear resistance of products such as plastics, automotive parts, rubber, leather and textiles, electroplating, freely detachable components, paints, printing patterns, etc. It can be used to evaluate the wear resistance of products, as well as the scratch resistance (single or multiple scratches) and color transmission of products. Both dry and wet wear tests can be conducted.
This smokeless Hypertherm Gantry CNC Plasma Cutter is mainly used for cutting the Steel/Iron sheet automatically. It is equipped with a special plasma cutting smoke treatment device, which effectively improves the working environment of the plasma cutting machine workshop. This Gantry Plasma Cutter is widely used for steel structure, shipbuilding, bridge and heavy machine industries. Cutting material: low carbon steel, stainless steel and non-ferrous metal, etc. machine can be designed according to the different needs of users. Features of smokeless Hypertherm Gantry CNC Plasma Cutter: 1. Beam with strong structural design, the structure has good rigidity, light weight, exercise inerti. 2. Gantry-type structure, Y-axis synchronous dual-motor drive and XYZ axis with circular rail (optional formula-type linear guide), steady transmission, and high accuracy. 3. Support WENTAI, BEIHANG HAIER, ARTCAM, Type3 software such as the standard G code path generated file can also be read by software conversion software such ad AUTOCAD generated DXF formats. 4. U disk exchange control system processing files, easy to operate. 5. Plasma torch power supply and supporting all famous brands such as American Hypertherm, a number of national patents by the manufacturers. Parameters of smokeless Hypertherm Gantry CNC Plasma Cutter: Model RB3060 Power source 220V,380V/50HZ Working area 3000*6000mm Cutting mode Plasma only, flame only, plasma and flame Cutting speed 0-4000mm per minute Plasma cut thickness Depend on current of plasma power source Flame cut thickness 10-200mm Cutting length 6000-12000mm (Can be as required) Number of Control Axes 3 Height range 0-500mm Height adjuster mode Automatic(include 24DC geared motor) Driving mode Stepper or servo mode, dual driving Operation system FANGLING , STARFIRE, START, Hypertherm Language version English, Chinese Russian, Spanish, French, Japanese, Czech, Slovak File transmission USB transmission
2023 MODEL TOYOTA RAIZE 1.0L TURBO AUTOMATIC TRANSMISSION ENGINE: 1.0L TURBO, 3-CYLINDERS- EURO 4 MAX OUTPUT: 97 HP MAX TORQUE: 140 N.M / 2400-4000 RPM CONTINUOUSLY VARIABLE TRANSMISSION (CVT) FRONT WHEEL DRIVE (FWD) FUEL TANK CAPACITY: 36L DIMENSIONS L - W - H (MM): 4030 - 1710 - 1635 5 PASSENGERS (INCLUDING DRIVER) EXTERIOR FEATURES 17 INCH ALLOY WHEEL TIRES SIZE: 205/60R17 LED HEAD LIGHTS LED DAYTIME RUNNING LIGHT (DRL) LED REAR LAMPS KEYLESS ENTRY "REMOTE CONTROL" POWER SIDE MIRRORS WITH TURN SIGNAL LAMP REAR SPOILER COLORED DOOR HANDLE FRONT & REAR BUMPER â?? MONO TONE AND TWO TONES REAR WINDOW WIPER HIGH MOUNT STOP LAMP â?? LED INTERIOR FEATURES FABRIC SEATS REAR WINDOW DEFOGGER DRIVER SEAT VERTICAL ADJUSTER MANUAL AIR CONDITIONING LIGHT CONTROL SYSTEM 4 SPOKE LEATHER STEERING WHEEL, SHIFT LEVER & ARM REST STEERING WHEEL CONTROLS POWER WINDOW ALL DOORS (AUTOMATIC DRIVER ONLY) SUN VISORS WITH VANITY MIRRORS INSIDE REAR VIEW MIRROR DISPLAY AUDIO USB PORT 4 SPEAKERS SAFETY & CONVENIENCE FEATURES DRIVE MODE SELECT (PWR) AIRBAGS (DRIVER & FRONT PASSENGER) HILL-START ASSIST CONTROL (HAC) ANTI-LOCK BRAKE SYSTEM (ABS) VEHICLE STABILITY CONTROL (VSC) TIRE PRESSURE WARNING SYSTEM (TPWS) ENGINE IMMOBILIZER SYSTEM CHILD PROTECTOR REAR FOG LAMP
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Model: DL1220S Product name: Fully automatic insertion and extraction force testing machine Maximum test stroke: 0-150mm Maximum test speed: 0-300mm/min Maximum test load: 50kg Minimum fine adjustment distance: 0.01mm X-axis travel distance: 0-75mm Y-axis travel distance: 0-75mm Load units: N, lb, gf, Kgf can be freely switched Transmission mechanism: ball screw Power system: stepper motor Machine weight: 80kg Machine size 400 * 300 * 980mm Power supply 1 AC220V 2A or specified 2. Introduction This machine is suitable for testing various types of connectors, such as insertion force, extraction force, plastic retention force, and service life. Through computer analysis, it can accurately measure the load, stroke, and corresponding change curve of the tested object. It can also accurately control the stroke, speed, target measurement times, and pause time of connector insertion and extraction force testing. Especially with various specialized clamps and fixtures, the connectors can be more automatically centered and aligned during testing, without the problem of "eating one side" occurring. By using the Chinese screen settings in Windows, the operation is simple and convenient, and all data can be stored (such as test conditions, displacement, curve plots, life curve plots, inspection reports, etc.), making it a reliable high-performance testing instrument. Equipped with a dynamic impedance testing system, it can test the insertion and extraction force while also testing the dynamic impedance and drawing (load stroke impedance curve diagram)
Product Description The Gaggia Anima Prestige is a super-automatic espresso machine that wraps over 75 years of espresso making experience in an elegant design that blends modernity and tradition. With a simple and intuitive programming menu, the ability to brew milk drinks with one touch, and time tested innovations that enhance the quality of your brewing experience, the Anima yearns to make a barista out of you. The Anima brews with a powerful 15 bar pump and Gaggia's innovative removable brew group. There are two dedicated drink buttons located on the front of the machine for espresso and espresso lungo and each can be programmed to your liking. The Gaggia Optiaroma system lets you brew using 6.5 - 11.5 grams of coffee (in five increments). You can also adjust brew temperature (Min/177.5 �°F, Med/182.9 �°F, Max/184.5 �°F), beverage volume, and pre-infusion. These settings can then be saved, allowing you to brew a drink to your exact specifications at the push of a button. Coffee is ground fresh for every brew cycle with the built-in ceramic burr grinder that can be set to one of five settings depending on the roast of your beans. The machine is also equipped with the Gaggia Adapting system which adjusts the grinding process to make sure that the correct amount of coffee is ground for your espresso. Should you prefer to use pre-ground coffee instead, the grinder can be bypassed entirely using the bypass doser to fill the brew group directly.
The auto sensor kitchen faucet works according to the principle of infrared reflection. An infrared emitting tube is installed near the bottom of the faucet, and the projection area of the emitting tube is just below the water outlet of the faucet. When people put hand under the water outlet of the sensor kitchen tap, the infrared receiving tube will be covered, and the microcomputer inside the faucet will receive the signal and send the water boiling command to the solenoid valve to release the water. When the hand leaves the bottom of the sensor kitchen faucet, the solenoid valve will receive a signal to close the valve, and the faucet will stop releasing water. Under normal circumstances, the waterproof time of the touch sensor kitchen faucet will not exceed 30 seconds, and the water flow is also controlled by auto flow sensor tap, which can greatly save water energy. Likegro's touch sensor kitchen taps are widely used in shopping malls, office buildings, rest stations and other areas with high quality, cost-effective prices, and perfect after-sales service, providing people with a lot of convenience. How Do Automatic Sensors Faucet Work? The automatic sensor water tap refers to the principle of infrared reflection. When the human hand is placed in the infrared region of the faucet, the infrared emitted by the infrared transmitting tube is reflected to the infrared receiving tube due to the blocking of the human hand, and the signal is sent through the microcomputer processing in the integrated circuit. For the pulse solenoid valve, the solenoid valve opens the valve core according to the specified command after receiving the signal to control the water from the faucetï¼?when the human hand leaves the infrared sensing range, the solenoid valve does not receive the signal, and the solenoid valve core is reset by the internal spring. Control the water from the faucet. Do Automatic Sensor Faucet Need Electricity? Induction faucets use AC or DC power supply and use infrared induction. In the induction area, the water will come in, and the water will be stopped when you leave the induction area. The machine is controlled by a microcomputer, and the optimal induction distance is determined according to the shape of the basin. No manual adjustment is required. Alkaline dry batteries (6V, 3V, 4.5V) are used for DC power supply. Likegro, as an excellent bathroom hardware manufacturers, offers a wide range of gold toilet seat hinges for you to choose from.
RB 1530-H water jet plasma CNC cutting machine is high performance heavy duty metal plasma cutting machine, especially suitable for cutting stainless steel and carbon steel with clean cutting edge quality. It adopts servo motor and driving device, and is equipped with water mist jet cutting torch which uses a professional braided tube to wrap the torch cable to prevent the high frequency in the torch cable from interfering with external equipment. Specifications of RB 1530-H water jet plasma CNC cutting machine: 1. FANGLING controller. This cutting machine numerical control system is suitable for all kinds of flame/plasma. high-pressure water jet. laser cutting machines. and is widely used in metal processing. advertising. stone and other industries. The system has a highly reliable design and has the ability to resist plasma interference. lightning strikes. Practical flame/plasma cutting process. during plasma processing. the corner speed control and height controller control are automatically completed; remote operation can be achieved with a wireless remote control. 2. High performance plasma cutting machine power supply. Torch cooling system built inside, which is with high-lift pump and high power radiator to reduce the consumption of torch consumables. Excellent HF arc striking control technology and separate structure of HF controller & power source, which highly reduces HF interference. Gas control separate from the power source: shorter gas circuit, more stable gas pressure with good cutting quality. 3.Plasma torch. REBOUND fine cutting torch Strong perforation ability, good cutting perpendicularity, smooth cut surface. For cutting processes with different currents and metal materials, consumables with good cutting quality are matched. 4. Servo driving system. 5. Automatic Arc Voltage Height Regulator The automatic height adjustment system of the torch controlled by closed-loop PWM is used to keep the height of the plasma CNC cutting machine torch to the steel plate constant during the plasma cutting process. Control the height of the cutting torch during the cutting process by detecting changes in the arc voltage. Ensure cutting quality and work efficiency.
Product Description Crafted for home baristas with tighter budgets and kitchen space, the ECM Classika II PID is a high performance semi-automatic espresso machine for those who demand quality without the restriction of cost. The result is a machine that utilizes many of the same commercial grade components ECM relies on for their prosumer models but at a more modest price point. Externally, the machine boldly reinforces the fact that no corners were cut with its polished stainless steel housing and custom machined E61 group head. On the top of the machine, the large capacity railed cup tray doubles as a passively heated cup warming surface and can be removed for access to the water reservoir. Removing the tray also allows access to the pump pressure adjustment screw. As you make adjustments, you can monitor your changes can be with the pump pressure gauge mounted on the front of the machine. Beneath the pressure gauge, brew temperature can be monitored and adjusted with the PID temperature controller. The Classika brews with .5 liter stainless steel boiler and a high-performance vibration pump. Like all ECM espresso machines, the internal plumbing avoids using teflon or other plastics in favor copper tubing with brass fittings. The water reservoir holds 3 liters and is fitted with a sensor that shuts off the machine off at low volumes to prevent the boiler from running dry. An advantage of brewing on a PID machine is that you can set the temperature to match your exact parameters. This becomes important when trying to extract specific notes and flavors from certain coffees. The vaunted E61 group head performs a vital function in helping to maintain these temperature conditions thanks to its thermosyphon system. Hot water and steam are dispensed through a shared wand located on the left side of the machine. Whether you dispense steam or hot water is controlled by a steam switch that raises the temperature in the boiler when flipped on.The Classika froths using a commercial style, two-hole steam tip ideal for crafting lattes, cappuccinos, and other milk drinks.Compact and capable, the ECM Classika II PID has the features you want and quality that you can depend on. Dimensions (with portafilter): 9.84" W x 21.85" D x 15.47" H Weight: 40.78lbs 3 Liter Monitored Reservoir The water reservoir holds an ample 3 liters of water and is fitted with a sensor that shuts off the machine at low volume to keep the machine from running dry. Durable Stainless Steel Construction The Classika II PID is housed in polished stainless steel that is both tough as nails and easy on the eyes. ECM wasn't content with simply welding the drip tray onto the machine, it's actually part of the frame for enhanced durability and build quality.
We are among the best Lanco Type threading die head manufacturers in India. Lanco Type Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in an assortment of types with us such as Lanco type pipe threading die head, Lanco type bar threading die head, Lanco type bolt threading die head and Lanco type rebar threading die head, Lanco type rod threading die head, Lanco type pvc pipe threading die head and Lanco type bar threading die head. These threading die head are efficient enough to give high performance in longer use. We facilitate our clients by providing easy accessibility of these threading die head at most reasonable prices. G9-power HEAT Treated die head are of the revolving type for application to hand operated, semi accurate to hand operated, semi-automatic & automatic threading machines of rugged construction the Die heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the G9-power Die Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.
BRIGGS & STRATTON 10KW HOME STANDBY GENERATOR (STEEL) Price:$1,356.00 SKU:40375 Brand:Briggs & Stratton Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 10 kW Fully Automatic Standby Generator Automatically starts when utility power is lost Advance Power Management (Transfer Switch Sold Separately) Combine with ATS to manage up to two 3-Ton AC units 570cc Briggs & Stratton V-Twin Commercial Grade Vanguard Engine Provides years of long lasting, reliable standby power Streamlined, Space Saving Design Sleek, compact profile blends in next to central AC unit Flexible Placement (Please Verify Local Building Codes) Tested against tough National Fire Protection Agency standards Can be placed as close as 18â?? from structure Front Air Ventilation Pushes engine exhaust out the front, away from the home Galvanneal Steel Enclosure Automotive rust proofing paint process reduces corrosion Auto Fuel Shutoff & Easier Maintenance Provides added safety during an emergency More service access & user-friendly control panel Includes Synthetic Oil & Battery Charger Industry Leading 5-Year Warranty Parts, labor & travel covered for 5-Years Specifications Engine Engine Brand Briggs and Stratton Vanguard Starting System 12v Auto Start CC 570 CC Consumer Engine Warranty 5 Years Engine RPM 3600 RPM Low Oil Alert/Shutdown Yes Product Specs Voltage 120/240 Single-Phase Frequency 60 Hertz Surge Watts 10000 Watts Rated Watts 10000 Watts Fuel Type LP/Natural Gas NG Power Capacity 9000 Watts LP Power Capacity 10000 Watts NG Fuel Consumption @ 50% Load 111 ft�³/hr NG Fuel Consumption @ 100% Load 169 ft�³/hr LP Fuel Consumption @ 50% Load 1.18 gallons/hr LP Fuel Consumption @ 100% Load 1.82 gallons/hr Rated Amps 42 Amps Decibel Rating @ 7m ? 75 dbA Transfer Switch Automatic (Not Included) Enclosure Steel Battery Not Included (540 CCA) A/C Ton Rating 3-Tons Mounting Pad Steel (Included) Cooling System Air Cooled UL Listed Yes Grade Type Emergency Overview Made in USA Yes Weight 272 Pounds Product Style Standby Generator Product Length 28 Inches Product Width 24.4 Inches Product Height 35.1 Inches Consumer Warranty 5 Years UPC 011675403751
Android Advertising Display DSD2150A In-store LCD display. Capacitive touch screen. Android-based, support 3rd party APK installed. 3000mL large-capacity liquid bottle. Combining hand washing with digital signage. With CE FCC ROHS certification. Android Advertising Display Features 21.5 inch LCD Screen Display with Hand Sanitizer Digital kiosks with integrated touchless digital hand sanitizer are ideal for areas such as entrances to buildings and common areas or at strategic points in high traffic zones. The large digital display offers dynamic messaging that is fully customizable to the audience and/or the area that the kiosk is placed. 21.5 inch Digital Interactive Touch Screen Kiosk Support power on/off automatically. Program playing via remote control, support single video, a single picture, video and picture cross playing, subtitles, weather, timing playing, remote monitoring terminal. Support USB, SD card, WiFi, Bluetooth, RJ45. Support HD 1080P video resolution. 3000mL large-capacity liquid bottle. Android-based, support 3rd party APP. 21.5 inch Interactive Touch Screen Kiosk with Hand Sanitizer 3000mL large-capacity liquid bottle. Auto dispense foam/gel/liquid/spray Easy refill design. 21.5 inch Android LCD Monitor with Hand Soap Dispenser Kerchan 21.5 inch digital sanitizer machine kiosk can be wall-mounted with VASA hole which supports moving to different locations as needed. Installation is simple and firm.