The transmission power is large, and the transmission power is 30% higher than that of the ordinary V-belt at the same time. The transmission system is compact, and the space occupied by the transmission device is 25% less than that of the ordinary V-belt under the same transmission power. The belt body is thin, full of flexibility, suitable for the transmission of small belt wheel diameter, but also suitable for high-speed transmission, the belt speed can reach 40m/s; Small vibration, less heat, smooth operation. Heat resistance, oil resistance, wear resistance, small elongation, long life. PK belt advantages >Excellent flexibility >High transmission efficiency >Low noise >Power transmission belt with multiple longitudinal ribs >Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley >Compared with V-belts, it has a larger contact surface area pk belt Features >High grade engineered rubber >Longer service life >Temperature range from -50â?? to +120â?? >Oil, heat,ozone and abrasion resistant >Reduce the space required by the drive system
The transmission power is large, and the transmission power is 30% higher than that of the ordinary V-belt at the same time. The transmission system is compact, and the space occupied by the transmission device is 25% less than that of the ordinary V-belt under the same transmission power. The belt body is thin, full of flexibility, suitable for the transmission of small belt wheel diameter, but also suitable for high-speed transmission, the belt speed can reach 40m/s; Small vibration, less heat, smooth operation. Heat resistance, oil resistance, wear resistance, small elongation, long life. Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery pk belt PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant
The transmission power is large, and the transmission power is 30% higher than that of the ordinary V-belt at the same time. The transmission system is compact, and the space occupied by the transmission device is 25% less than that of the ordinary V-belt under the same transmission power. The belt body is thin, full of flexibility, suitable for the transmission of small belt wheel diameter, but also suitable for high-speed transmission, the belt speed can reach 40m/s; Small vibration, less heat, smooth operation. Heat resistance, oil resistance, wear resistance, small elongation, long life Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery pk belt PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant
The belt body is thin, full of flexibility, suitable for the transmission of small belt wheel diameter, but also suitable for high-speed transmission, the belt speed can reach 40m/s; Small vibration, less heat, smooth operation. Heat resistance, oil resistance, wear resistance, small elongation, long life.Our Advantage -- We are a factory, so the price is cheap -- Samples are free -- The production adopts new technology and has a longer life -- We will reply to your inquiry within 1 hour -- We can provide the best-selling sizes and models in the local market --Complete models, fast delivery pk belt PRODUCT FEATURES -- Excellent flexibility and high transmission efficiency -- Power transmission belt with multiple longitudinal ribs. -- Torque is transmitted through the contact of the side of the belt rib and the groove of the pulley. -- Compared with V-belts, it has a larger contact surface area. -- High grade engineered rubber,longer service life. -- Temperature range from -50 to +120 -- Oil, heat,ozone and abrasion resistant
Fatty Acid Methyl Ester (FAME) is based on plant oil as main raw material, is a yellowish liquid,the relative density of 0.875, insoluble in water, stable structure, non corrosive. Application 1. FAME is the raw material of plasticizer EFAME, it can be used in plastic industry. 2. FAME(biodiesel) as fuel can compound combustion, it improves the engine emission standards with fully combustion and carbon free, to reduce emissions of sulfur dioxide by adding biodiesel. It has been widely used as a new type of energy at home and abroad. 3. FAME is widely used in the synthesis of high surface active agents, such as it can be produced to Fatty Acid Methyl Ester Sulfonate(MES) via sulfonation neutralization. 4. FAME can be hydrogenated to produce fatty alcohol, fatty alcohol can be used in plastics, leather, textile, synthetic detergent etc. 5. FAME can be used as the additive of high grade lubricating oil, perfume. It is also as the main raw material of degreasing agent, penetrant, emulsifier and painting.
The fuel metering unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering units are precision components. Improper maintenance or use of inferior filter elements will often lead to excessive water or impurities in the fuel, which will cause the fuel metering spool to wear or stick, resulting in the engine not working properly. The pressure regulating valve 0928400726 controls the common rail pressure together with the flow control valve. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400726 4.Function: Control emissions in combustion environments 5.Application: BOSCH FIAT IVECO 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
fuel metering unit also known as the proportional valve into the oil metering. It is installed in the high-pressure oil pump into the position for adjusting the fuel supply and fuel pressure value, controlled by the ECU. The control process is influenced by the values measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve, can also be compared to a variable size faucet. Fuel Measurement Solenoid valve 0928400712 unit belongs to the precision element. If the maintenance is not appropriate or the use of poor quality filter, often lead to fuel in the water or impurities too much to cause fuel metering valve spool wear or stagnation, resulting in the engine can not work properly. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400712 4.Function: Control emissions in combustion environments 5.Application: BOSCH CUMMINS 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
Automotive engine parts CUMMINS Common rail metering valve is suitable for CUMMINS High presure common rail. The fuel metering valve unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. In addition, our Nitrogen Oxygen sensor,Fuel Pressure Limiter valve,Fuel Pressure Sensor and other products are also very popular. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400711 4.Function: Control emissions in combustion environments 5.Application: BOSCH CUMMINS 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
Automotive engine parts CUMMINS Common rail metering valve is suitable for CUMMINS High presure common rail. The fuel metering valve unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. In addition, our Nitrogen Oxygen sensor,Fuel Pressure Limiter valve,Fuel Pressure Sensor and other products are also very popular. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400711 4.Function: Control emissions in combustion environments 5.Application: BOSCH CUMMINS 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
Automotive engine parts metering valve 0928400683 is suitable for BOSCH High presure common rail. The fuel metering valve unit is also called the fuel metering proportional valve. It is installed at the oil inlet position of the high-pressure oil pump, and is used to adjust the fuel supply amount and fuel pressure value, and is controlled by the ECU. The control process is influenced by the value measured by the rail Pressure Sensor. Simply put, the metering unit can be compared to a throttle valve or a faucet that can adjust the size of the agent. Fuel metering valve opening is varied by its solenoid coil being pulse width modulated at a frequency of 1 KHz. Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection The products are 100% new and carefully packed. 1.Name: Fule metering valve Fuel measurement valve 2.Certification: CE, TS16949 3.Model NO.: 0928400683 4.Function: Control emissions in combustion environments 5.Application: BOSCH 6.Ciondition: 100% NEW 7.Weight(g): 190.2g 8.Deliverytime: 7-15 days 9.Packing: Neutral packing Customize according to customer needs
PRODUCT SPECIFICATION: Bore/Stroke : 81 x 68mm Carburetor/Injector : Floatless Carburator Mikuni BN38 x 2 Compression Ratio : 7.2:1 Cooling : Water Cooled Displacement : 701cc Dry Weight : 240kg Engine Type : 2-stroke; 2-cylinder Fuel : Regular Unleaded Gasoline Fuel Capacity : 50L Height : 1.16m Length : 3.22m Width : 1.17m Hull Material : NanoXcel Mixing Ratio : 50:1 Oil Capacity : 4.5L Pump : 155mm Axial Flow Starter : Electric Lubrication Type : Oil Injection Vehicle Capacity : 1-3 person Storage Capacity : 84L Colour : White with Shiny Green Metallic INFORMATION: Message and color, depending on the stock in the warehouse The price includes VAT tax Prices above Jakarta prices, excluding shipping costs outside Jakarta Price does not include trailer (Price of trailer IDR 12,500,000 / unit) Purchase by Pre-Order (3-4 days) and Down Payment Prices are subject to change without notice Mpte: Please leave your messeage with details your email address in our inbox, thank you. -
Technical Parameters Item Unit HBC80-18-194S Theoretical concrete displacement (high/low pressure) m3/h 60/85 Theoretical concrete output pressure (high/low pressure) MPa 18/12 Pressure of hydraulic system MPa 32 Displacement of main oil pump ml/r 260 Power of active force/rotate speed kw 194/2000 Diameter of master cylinder/rod diameter�stroke mm Φ150/Φ90�1800 Diameter of conveying cylinder�stroke mm Φ200�1800 Reversing frequency (high/low pressure) Times/min.-1 17/25 Hopper capacity�material feeding height m3�mm 0.6�1500 Concrete slump mm 120-230 Max. theoretical vertical height M 280 Switch of high and low pressure / Automatic Capacity of hydraulic oil tank L 600 Vehicle parameters Total length mm 9010 Total width mm 2470 Total height mm 3060 Total mass kg 13000 Chassis parameters Chassis model / DONGFENG EQ1128GLJ1 Chassis engine model / ISDe180 40 (Cummings 132KW) Emission standard / National IV Max. vehicle speed km/h 95 Capacity of fuel tank L 160x2 Wheelbase mm 4700
Physical and Chemical Properties 1 4butanediol is a colorless oil liquid flammable melting point 201 boiling point 235flash point open cup 121 relative density 10171204 refractive index 14461 viscosity 25 715mPas It is hygroscopic miscible with water soluble in methanol ethanol acetone slightly soluble in ether The smell is bitter but the taste is slightly sweet With strong reactivity it can carry out oxidation dehydration replacement polymerization amination esterification halogenation and other chemical reactions to produce a series of important chemical products 14butanediol Uses 1 4butanediol is an important organic chemical and fine chemical raw material which is the basic raw material for the production of polybutanediol terephthalate PBT engineering plastics and PBT fiber PBT plastic is one of the five most promising engineering plastics 14butanediol is the main raw material for the production of tetrahydrofuran tetrahydrofuran is an important organic solvent The PTMEG obtained by polymerization is the basic raw material for the production of high elasticity spandex Lycra fiber Spandex is mainly used in the production of high class sportswear swimming suits and other high elasticity knitwear Gammabutyrolactone the downstream product of 1 4butanediol is the raw material for the production of 2pyrrolidinone and NMethylpyrrolidone products From this a series of high valueadded products such as NVinyl2Pyrrolidinone and Polyvinylpyrrolidone are derived which are widely used in the fields of pesticides medicine and cosmetics 14butanediol is also widely used as solvent pharmaceutical cosmetics plasticizer hardener pesticide herbicide foam leather fiber engineering plastics and so on 1 4butanediol BDO uses Manufacturing Process of 14butanediol 1 4butynediol was prepared by acetylene and formaldehyde in the presence of catalyst and then by catalytic hydrogenation to produce 1 4butanediol It can also be prepared by the reaction of 1 3butadiene with acetic acid and oxygen through acetyl oxidation hydrogenation hydrolysis etc
Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: Drilling depth 100/180 m Initial hole dia. 150mm Final hole dia. 75/46mm Drill rod dia. 42/43mm Angle range 90°-75° Dimensions(LÃ?WÃ?H) 1620Ã?970Ã?1560(mm) Weight(without power unit) 620kg Migration distance 350mm Swivel Head Spindle speed(5-speed) 1010/790/470/295/140r/min Spindle stroke 450mm Upward displacement speed of idling vertical spindle 0.05m/s Downward displacement speed of idling vertical spindle 0.067m/s Spindle pull-down max 15KN Spindle lifting capacity max 25KN Hoist Max .lifting capacity(single rope) 15KN Lifting rotating speed 121/76/36r/min Hoisting drum linear velocity (two levels) 0.166/0.331/0.733/1.465m/s Drum dia. 140mm Wire rope dia. 9.3mm Wire rope capability 35m Brake dia. 252mm Brake belt width 50mm Oil Pump Model YBC-12/80 Rated pressure 8Mpa Displacement 8ml/r Rated speed 1500r/min Power (diesel engine or motor) Model (diesel engine) S1100A2 Rated speed 2200r/min Rated power 10.3KW Model (motor) Y160M-4 Rated power 11KW Rated speed 1460r/min
1.Brief introductions of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig for coal mine is mainly used for drilling holes of large diameter gas (row), grouting and fire prevention holes, coal seam flooding holes, anti outburst and pressure relief holes, water penetration holes, geological exploration holes and other engineering drilling holes. It is suitable for all kinds of coal and rock drilling. But the rock strength coefficient of needs to be under 10. Appropriate drill bits and drill pipes can be used for coring, soft coal seam drilling and other engineering operations. 2. Features of ZDY-3200S full hydraulic tunnel drilling rig The ZDY3200S full hydraulic tunnel drilling rig is a combined structure of all hydraulic power head. It consists of four parts: the hydraulic pump station, the power head, the rack, the operation floor and the column support. The breakage performance is good. The components are light in weight. It is easy for underground driller to move and shift, and the drilling rig structure layout is flexible. The rig has unique hydraulic system and double pump. The rotary parameters of drilling rigs and the feeding parameters can be independently regulated, which improves the adaptability of drilling rig to various drilling processes. The power head gyrator adopts the structure of double motor and transmission spindle through hole, and the length of drill pipe is not restricted by the drilling machine, that is to choose the drill pipe with different length according to the construction conditions of the underground drilling field. The hydraulic chuck and the hydraulic gripper are used for unloading the drill pipe, which is simple, labor-saving, efficient and safe. The oil pipe connection is between the operation platform, the pump station and the main engine, so you can operate it intensively and the personnel can operate far away from the wellhead to protect personal safety. Four column support, lifting cylinder will adjust the fuselage (drilling inclination angle), which is convenient and labor-saving. With variable pump, it has infinite variable speeds regulation and great adaptability in different working conditions.
Products descrption of Electric Power Transformer:The performance of SZ-M and SZ series 10kV and 35kV on-load tap changing transformers conforms to GB1094 Power Transformers and GB/T6451-2008 Technical Parameters and Requirements of Three-Phase Oil Immersed Power Transformers. With cores made with quality cooled rolled silicon steel sheets connected with fully sloping joints without being perforated and coils made with quality oxygen free copper,, Electric Power transfromer are beautiful in appearance and safe in operation. Electric Power transfromer are widely used for rural and urban industrial and agricultural power transmission and distribution. The main function and features:â?? On-load voltage regulation has high reliability, advanced performance and reasonable economic indicators.â?? The iron cores adopt stepped three-level joints with the surface coated with hardening varnish, to reduce loss and noise. â?? With new winding structure, reasonable oil passage design and new insulation structure, the mechanical strength and anti-short circuit capacity are improved.â?? The tanks have two structures: fully sealed type and the type equipped with oil storage.Product ModelSZ Series 10kv 35kv oil immersed electric Power Transformerwhy choose us1. We are factoryXiecheng have more than 10 years experience in electric power industry, the production capacity up to 240MVA with the primary voltage of  220KV,qualified supplier for china state grid.Offers more then 5000pcs of transformer to the over seas, Cost-effective, highly efficient, durable and easy-to operate transformer is what we deliver.2. Provided turnkey solution We offers you a complete turnkey solution for building a power plant, steel plant, foundry or metal forming Industry. We can design the plant, manufacturer the equipment, install and commission it. also we can Provide the professional engineer team to your place to run the factory for you.3. Strict Quality Control SystemBefore Being dispatched from our factory all of our equipment will undergo a series of strict test, including the appearance quality test, voltage electrical test, aging test also the package strength checking. On our production line each worker takes personal responsibility for their assigned task and this allows us to guarantee our products.4. Professional after sales service(1) Our teams provide onsite installation, commissioning and after sales service. (2) You will get free lifelong technical advice from our highly qualified engineers at Xiecheng. This will give you a lot of confidence when buying from our company.(3) We guarantee the ongoing supply and preferential prices for spare and wearing parts.(4) Our highly qualified team of service technicians are well equipped to keep your transformer operating at high efficience at all times.
Features of XY-3 hydraulic core drilling rig ·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application ·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient ·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident. ·Equipped with normally closed hydraulic chuck, operation is flexible and reliable ·The independent operation of the vertical shaft and the hoist can be realized ·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod 2. Parameters of XY-3 hydraulic core drilling rig XY-3 hydraulic core drilling rig Drilling depth 600m Borehole diameter 300-75mm Max open hole caliber 300mm End hole caliber 75mm Drilling rod diameter 60 Drilling angle 90°-65° Spindle spindle speed 30-1050r/min Spindle stroke 29-137r/min Spindle stroke 60mm Spindle inner diameter 96mm Lifting capacity 6000kg Hoist Max.single line lifting speed 0.5-1.9m/s Wire rope caliber 12.5mm Max.single line lifting capacity 4000kg Reel diameter 300mm Wire rope length 50m Maximum lifting capacity of single rope 3000kg Mud pump Type Horizontal three cylinder BW-250 Displacement 250l/min Work pressure 80kg/cm² Water inlet pipe diameter 75mm Water outlet pipe diameter 50mm Gear oil pump Duplex gear oil pump CBF-F63/25 Front displacement, pressure 63l/min 20mpa Water outlet pipe diameter 25l/min 20mpa Power Diesel engine 39kw Electric machinery 22kw Weight size Drill weight 1800kg Shape size 2500*900*1800mm
An offshore steel IS 2062 Grade B paperboard we offer has been recognized by customerâ??s altogether walks of life, from key companies like sugar, paper, textiles, dairy products, engineering to a better level of personalization. Industries like oil, gas , petrochemical, chemical and fertilizer, electrical power and atomic energy are unstoppable. Sai Steel & Engineering Co. features a wide selection of requirements for offshore steel IS 2062 for the B-level printing plate. Lower costs and better partnerships. Therefore, our checking accounts are currently located in several countries/regions like Saudi Arabia , Kuwait, Qatar, Oman, Yemen then on. , United Arab Emirates, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa , South America, Brazil, India, Australia, Egypt. We are very happy together with your inquiry. We provide high-quality studio-grade IS 2062 records at reasonable prices. These IS 2062 Class B blades are made from the very best quality materials available to make sure overall quality. As listed by Sai Steel & Engineering Co., these IS 2062 Class B boards are suitable for the dimensions and thickness of the violin. because of experienced professionals and qualified personnel, and therefore the use of the newest modern equipment, IS 2062 high-quality blades and Profile B customers from everywhere the planet are provided, in order that they are unparalleled. Since all offshore steel IS 2062 grade B blades are available, they will be dig certain sizes and shapes to point out the inspiration of their creation and contours. All work is performed using our quality system, which is seamlessly verified and isn't prohibited. Your check is reliable. Like all our suppliers, the very best quality steel manufacturer on the earth has been tested and rated at our meetings. What is IS 2062 Grade B Plate ? Standard:EN 10025: 2004 Specification This standard was some time back known asIS 226. Eventually IS 2062 has supplanted this specification.This review is for"Steel for general assistant purposes". Assistant steel fabricated by Sai Steel & Engineering Co. all the quality parameters of this standard to Grade A. This level is also usually known as IS 2062 â?? GRE 250(Fe â?? 410 â?? W)A, altogether, particulars of this review Fe gllow An are as under. IS 2062 Grade B Plate Grade and Specification Thickness:1.5mm-200mm Width:900-2500mm or 1000,1050,1250,1500,1800,2000mm Length: 2-12m or as customersâ?? special requirements; Grade of hot rolled steel plate: SS400, ASTM A36,A572,ST37,ST52,Q195, Q215, Q235,Q345,S235JR,S355JR,S45C, S50C Standard:EN 10025-2:2004 Export To:Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.
1.Brief introductions of ZDY-1200S full hydraulic tunnel drilling rig ZDY1200S full hydraulic tunnel drilling rig is a full hydraulic power head structure with wide speed range, large torque and strong lifting and drawing ability. It is suitable for the construction of advanced detection hole, geological exploration hole, gas drainage hole, water injection hole and other engineering holes in coal mine. ZDY1200S full hydraulic tunnel drilling rig is composed of three main parts, main engine, pump station and control table. It has good disintegration, convenient relocation and transportation. It can be arranged flexibly according to the situation of the site; it has linkage function and simple and flexible operation; it uses double pump confluence system to drill down fast and work efficiency high; the diameter of the power head through hole is large and the replacement of different diameter of the diameter of the drill can use the drill pipes of different diameter. The length of the drill pipe is not limited by the structure size of the drilling rig itself; it is used to support the oil cylinder to adjust the angle of the fuselage to be convenient and labor-saving. At the same time, the support of the fuselage is safe and reliable. The control handle is concentrated on the control table, and the worker can operate in a long distance, so itâ??s good flexibility and high safety. 2. Specifications of ZDY-1200S full hydraulic tunnel drilling rig Project Unit Parameter Maximum drilling depth m 200 Borehole diameter mm Ф75 Drilling pipe diameter mm Ф42/Ф50 Drilling angle ° 0-±90 Output torque n.m 350-1200 Ability to feed kn 36 Ability to pullout kn 52 Rotating speed r/min 80-280 Rated advence speed m/s 0-0.45 Hardness range (protodyakonov scale of hardness) fâ?¦10 Main engine size mm 1850*710*1460 Total weight (excluding the drill rod) kg 1360 Main engine weight kg 750 Motor power kw 22 Shandong Master Machinery Group Co.,Ltd. Sales Manager:Coco Yan Tel:0086-537-2335787 Mob: 0086-18865479508 Wechat:008618865479508 Whatsapp:008618865479508 QQ:2648769002 E-mail:sale05@huaxiamaster.com Website:www.huaxiamaster.com
Features HDPE dredging Pipe is most suitable for mud & sand delivery and discharge, the performance is as follows: 1. Light weight, saving time and improving efficiency. HDPE dredging pipes are only one-eighth of steel pipes. They adopt flanges and bolts for connection, installation and dismantlement, which mean they are convenient for transportation, repair and replacement. 2. Great flexibility, tensile strength and elasticity. HDPE dredging pipe doesn't break after internal and external force impact, it has great resistance of stormy waves. They could be bended to be a circle by 4-8 pieces in the water. If they are need to be connected on land, they can be connected directly as long as the concave-convex is within 30 degrees of area. 3. Excellent wear-resistance ability. HDPE dredging pipeâ??s wear-resistance ability is 4-8 times of steel pipe, together with its anti-UV and anti-aging ability, it normally can be used for 5-8 years upon sand content. 4. HDPE dredging pipe is assembled with two metal flanges at both pipe ends. The pipes are connected by flanges and bolts, which ensure they will not deform and drip when installing and disassembling and ensure the engineeringâ??s high efficiency. 5. HDPE dredging Pipe has smooth outer and inner wall and tiny friction coefficient. Its transmission efficiency is 20% to 30% higher than steel pipe. 6. HDPE dredging Pipeâ??s workable temperature is range from â?? 40 ° c to 60 ° c, it can adapt to bad weather and fluctuated temperature. 7. Whenever on land or water, HDPE dredging Pipeâ??s total engineering cost is lower and more efficient than other pipes. Application: 1. Delivering powder and coal ash in thermal power plant. 2. Delivering mine tailings and slurry, metallurgical mines in the mining industry. 3. Delivering pulverized coal and coal-water slurry of coal preparation plant in the coal industry. 4. Delivering mud and corrosive media with slag in the chemical industry. 5. Delivering crude oil and petroleum. 6. Delivering sand\mud\slurry for dredger in dredging projects or sand suction projects, and also for seawater treatment projects Tengyuan can supply municipal engineering pipe, dredging engineering pipe, HDPE Gas Pipe, Power Engineering Pipe, Mining Pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.