Yunlong Fa316B Draw Frame Part Suppliers and Manufacturers

Product: Brass Scrap Honey Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Specification - Temper : 'O' 1/2 H - Tensile Strength : 340 Min-400 Min - Elongation % on 50 mm G.L : 40 Min - Vickers Hardness VPN : 80 Max/95 Min-120 Min -Cu -: 58% - 60% -Pb -: 1.5% - 2.5% -Imp -: 0.3% (Max.) -Zn -: Remaining Consist of: doors and windows Profile frame, house utensils Our Brass Honey Scrap consist of Faucet scrap, scrap of machinery parts, plated brass, etc Item Standard Result Cu% 99.9 min 99.99 Sb% 0.002max 0.001 As % 0.002max 0.0006 Fe% 0.005 max 0.0012 Ni% 0.002 max 0.0008 Pb % 0.005max 0.0025 Sn% 0.002max 0.0007 S% 0.005max 0.003 O% 0.002max 0.001 Zn% 0.005max 0.002 P% 0.001max 0.0002 50kgs/bale,about 20mt/20'fcl

Spices and Herbs Spices are the essential part of every household and we provide spices which are custom made to suit customer requirement and taste. Also spices can be used for for other purposes, such as medicine, religious rituals, cosmetics, perfumery or eating as vegetables. For example, turmeric is also used as a preservative; liquorice as a medicine; garlic as a vegetable. In some cases they are referred to by different terms. In the kitchen, spices are distinguished from herbs, which are leafy, green plant parts used for flavouring purposes. Herbs, such as basil or oregano, may be used fresh, and are commonly chopped into smaller pieces. Spices, however, are dried and often ground or grated into a powder. Small seeds, such as fennel and mustard seeds, are used both whole and in powder form. Implementing advanced methods of extraction, blending, mixing etc., we manufacture and export wide range of basic ground spices as well as blended masalas. All our products comply with international health & safety standards. All our products are quality certified by quality control department before being dispatched for the marketplace. We ensure to deliver all our products in convenient packaging and within stipulated time frame. Ground Spices: Turmeric Powder Chilli Powder Cumin Powder Coriander Powder Fennel Powder Fenugreek Powder Five Spice Powder Chilli Crushed Black Pepper Powder Ginger Powder Nutmeg Powder Curry Powder Madras Yellow Mustard Powder Black Pepper 28 Mesh White Pepper Powder Cinnamon Powder Cloves Powder Whole Spices: Cumin Seed Corainder Seed Red Chilli Whole Turmeric Fingers Black Pepper Ginger Whole Dried Poppy Seeds White Basil Seeds White Pepper Whole Black Cardamom Green Cardamom Cardamom Seeds Ajwain Seeds Fenugreek Seeds Fennel Seeds Black Mustard Seeds Dill Seeds Celery Seeds Star Anise Mace Bay Leaves Curry Leaves Tamarind Cinnamon Sticks Cloves Pomegranate Seeds Nutmeg Without Shell Yellow Mustard Seeds Dried Fenugreek Leaves

AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.

We sell Refined and Crude Soybean oil that is 100% certified and authorized for human consumption. More-so, we are open to supplying Refined soybean oil worldwide. Soybean oil has always been a popular oil for cooking, as an inexpensive, healthy oil with a high smoke point. It contains higher levels of poly-unsaturated fats than other oils such as rapeseed, giving our Soybean oil the special character of healthy oil. Soybean oil is a nutritious and delicious cooking oil, also providing a rich source for vitamin E, which can reduce the risk of heart disease. Non-GMO, 100% free from any coloring materials, flavors, and anti-foaming agents. Our range of light yellow colored refined oil is a rich source of antioxidant and has less oil absorption element and longer shelf life. We assure the purest and best quality Refined Sunflower Oil, Corn Oil and Soybean oil at economical price range. We supply in different quantity sized packs: PET bottles, jars, tins and pouches as per your requirement. Delivery will be within stipulated time frame.. Soy oil - is a product derived from soybean processing. Soy oil plays a very important role in the life of humans, since it is a source of biologically active and valuable fatty acids, and is used in to help prevent cardiovascular diseases and facilitate metabolism. It is used as a concentrated source of energy, fat-soluble vitamins and essential fatty acids. Alongside with other vegetable oils, soy oil should be a mandatory part of the diet that contributes to good health and longevity. Refined deodorized soy oil is widely used in food industry, including: oil and fat industry, bakery, candy manufacturing, cannery and meat processing. Soy oil is also used in the combined feed, paint and varnish and other industries.

New 4 Wheel Golf Cart Utility Vehicle 6 Seater Electric Club Car evolution golf cart Our key parts are using famous China Brand, all frame is using steel structure, cover parts can be steel or automobile engineering material. Cars can be customized of different color and design etc. We have passed Iso9001, and strictly comply with the quality systems to make sure we can supply qualified and consistent products for clients.

Applications: 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminum is produced in the production of industrial waste. Such as: Scrap Aluminum Wire, Scrap Aluminum block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferrous, electronic waste etc. Aluminum scrap Density: 2.702g/cm Melting point: 660.37 Boiling point: 2467.0 Features: Free from Nuts, Steel plate, paint Chemical Composition: AL Appearance: Silvery White

We are manufacturing, distributing and trading a comprehensive range of 99.9% Copper Honey Brass Scrap that conforms to international quality standard norms. We are the right choice for obtaining superior quality brass Scraps. Copper Scraps that we supply are on massive demand owing to their usage in fabrication of utensils, copper wires, alloys for different industries etc. apart others. Highly ductile and superior performance distinguishes them from other variants available in the markets. Quick Details : Place of Origin: Germany/Poland /Spain Brand Name: Brass Model Number: 99.9% Copper honey brass Scrap Type: Brass Honey Copper Content: 99.99% Supply Ability Different types of brass scraps that are used for recycling or for recovering pure brass, include - brass electrical parts, brass sanitary, brass pneumatic parts. TEST RESULT : Copper: 99.9% Carbon: 0.03% Phosphorus: 0.01%max Coblet: 0.01%max Sulphur: 0.01%max Iron: 0.005%max Zinc: 0.003% Scrap Contains -Cables -Scrap Motor Winding wires -Bus Bar Strips, etc Used As A Raw Material In - Copper Wire Drawing Units - Foundries - Copper Utensils Manufacturing Units - Automobile Industries.

Applications 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc. Our advantage: 1. We offer the most competitive prices. 2. We provide relevant professional product consulting. 3. We are willing to help customers find any potential products and merchandise. 4. You can visit our factory by yourself. Our success is inseparable from your support and making friends from all over the world in good faith. 5. Our aim is: integrity first; reputation first, best reputation; once cooperation, friends for a lifetime. For more information about our product, please feel free to contact us.

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

Top Quality Pure 99.9% Aluminium Ubc Scrap Beverage Can Scraps Aluminum can Scrap (UBC) - Aluminium Used Beverage Cans Scraps This is an aluminium cans scrap which is generated from beverage cans. The cans are free from dirts, dusts, water and oil. This is ongoing supply and we are capable of meeting your qauntity requirements. If you are interested in our product, Please write us with your email and phone number for more information, product pictures and fast reply. USED BEVERAGE CANS ALUMINIUM SCRAP FOR REMELTING.99,5% AVERAGE ALUMINIUM CONTENT. Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC scrap Specification 1. Mainly used for melting ingot 2. Discontinuous melting with scrap 3. Easy control and operation 4. Fast melting 5. Energy saving This Scrap Aluminium is produced in the production of industrial waste. Such as: Scrap Aluminium Wire, Scrap Aluminium block and so on 6. It mainly used for drawing back non-ferrous metal typical material is: Wasted copper, aluminum, cable, aluminum stuff, wasted auto spare part, non-ferrous metal scrap, dross for printing, broken glass contains non-ferroous, electronic waste etc.

Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic

Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium

Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic

Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum

PIV Chain in Blow Room Machine