Used cooking oil Measurements shall be carried out after extraction from the lower part. 1) Total acid number - Less than 5 (Test Method - KS M ISO 6618) 2) Iodine water - g 12/100g (Test Method - KS M ISO 12937) 3) Water and Sediment - Weight % -More than 100 (Test Method - KS H ISO 3961) Water average: Lower layer result x 0.05 + Upper layer result x 0.95 FFA: Max 5% MI&U: Max 2% Iodine Value: min. 90 Sulfur: less than 30ppm
GENERAL TECHNICAL SPECIFICATION SOYBEAN OIL Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
GENERAL TECHNICAL SPECIFICATION Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
We deals in the following Chemicals :- Ester based Mud Lubricant Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We deals in the following Chemicals :- Drilling Mud Lubricants Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Dolomite Powder Barite Powder, Barite Ore Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Ilmenite (Synthetic Rutile) Fly Ash Powder Alumina Silica ( Cenosphere ) Powder Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
We sell wholesale of motor oil , kindly contact for price
KAZUKO AUTO ATF Dexron IV is a premium quality fluid specially formulated with formulated with high purity synthetic base stocks. It is designed to maintain its viscosity through excellent oxidation stability. This product is chemically balanced to provide protection for seals and O rings against corrosion, rust, and wear as well as resistance to oxidation to prolong the life of the fluid. Application: AG AUTO ATF Dexron IV is formulated for use in all types of automatic gears, torque converters, transmission systems, power steering and hydraulic circuits where the manufacturer recommends DEX-IV fluid. It is particularly suitable for use in automatic transmissions of car & light trucks and On-highway & Off-highway heavy duty automatic transmissions. Meets and Exceeds: MB-APPROVAL 236.8 BMW 7045 ETL-80728 MATIC FLUID C/D/J/K/S T-IV (JWS 3309). Performance Benefits: Smoother shift in transmission. Does not break down in stop and go driving. Friction properties to provide longer transmission life. Compatible with all common seal materials. Provides good protection against rust and corrosion.
KAZUKO Diesel Engine Oil uses highly refined base oils and balanced additive system to deliver fuel economy performance, and to protect modern engines operating under extreme conditions of pressures and temperatures. It is the ideal choice for operators of heavy-duty truck and bus fleets equipped with latest emission designs. Application: KAZUKO Diesel Engine Oil is particularly suitable for use in naturally aspirated and turbocharged diesel engines in the trucks of haulage transport, in bus transport, in construction and ship transport. It is also suitable for light commercial vehicles with diesel engines. Meets and Exceeds: API CI-4 ACEA E7 MB 228.3 Deutz DQC III-18 Cummins CES 20076/77 Volvo VDS-3 Mack EO-N/M+ Performance Benefits: Drain interval extension. Outstanding oxidation & thermal stability Excellent lubricity at both high and low temperatures Total engine protection Improved protection during start-up by maintaining protective oil film.
Fmcg, industrial supplies, equipment, raw materials, minerals, lubricants, cements, barite , building and construction, fresh vegetables & fruits, lubricants & oils,quartz, dry fly ash, fly ash bricks,quartz stone, all kinds of quartzs, automobile spare parts and all kinds of engineering motors, Automobile spare, Parts And Accessories Of The Motor Vehicles.Fast growing logistics service provider caters to our customers requirements in terms of international freight forwarding. being at the forefront has enabled us to offer a great deal of expertise in the custom clearing and forwarding industry.
Our company alba grups ltd.is producer: essential oils: rose oil, lavender oil, mentha pipperita oil, yarrow oil, roman chamomile oil, german chamomile oil,hyssop oil, helichrysum oil, juniper berry oil, pine oil, melissa oil, geranium oil, clary sage oil, salvia officinalis oil, oregano oil, rosemary oil, thyme oil, coriander seed oil, siberian fir oil, jasmine oil. flower waters: rose damascena water,rose alba water, lavender water,juniper berry water, frankincense water, helichrysum water wormwood water, mentha pipperita water, pine water, gernium water, salvia officinalis water, clary sage water, oregano water, rosemary water, thyme water, jasmine water absolutes: rose absolute , lavender absolute, beeswax absolute, oakmoss absolute concrets: rose and lavender dried hers: rose dmascena and rose alba flowers, lavender flowers, juniper berry, tilia flowers, rosehip berry,rosehip seeds and more dried herbs from bulgaria..
Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.
Slack Wax, minimally refined paraffinic wax obtained from the dewaxing process of base oil lubricants. It is used in a wide range of applications, including as a blending component in the production of paraffin waxes, as a waterproofing agent, and in the manufacture of candles, rust protective products, and board sizing.
Perfectly refined to ensure supreme quality, our Base Oils SN 500 and SN 150 are the lifeblood of high-performance lubricants. Ideal for a wide range of applications, these oils guarantee enhanced protection and efficiency for machinery and automotive engines.
Transformer Oil is highly purified non-inhibited high performance mineral oil of Class 1 category of electrical insulation oils, confirming to IS 335:1993 It is use to insulate and cool transformer coil and to quench� electric� arcs� that� form between� contacts� of� switchgears,� circuit� breakers� and� rheostats� using� mineral insulating oil. BENEFITS High insulating capacity. Effective cooling and heat dissipation due to low viscosity. Minimum risk of fire due to very high flash point. High demtilsibility to ensure good separation of water in case of accidental pollution. No impurities e.g. water, dissolved gases suspended solids, etc.. Excellent oxidation stability. Minimum consumption of product due to low volatility at operating temperatures.
Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel.
Almonds nuts, cashew nuts, pistachios nuts, nuts & dried fruits, rice & grains, pulses, chickpeas, green lentils, red lentils, red kidney beans, sugar, energy drinks, baby food, fmcg products, a4 copy paper, toiletries, oils and fats, refined sunflower oil, frozen chicken, frozen pork, food chemicals, beverages, aluminum foil, baking papers and nylons, trash can bags and liners, organic chemicals, water chemicals, agricultural chemicals, confectioneries, cosmetics, cleaners and disinfectants, lubricants, fresheners and purifiers, pet foods, pure chemicals, solvents, acids, inorganic chemicals, dry fish, milk products, avocado, frozen fish, frozen vegetable, dairy products, condiments and dippings, cereals and oatmeals, medical kits, seafood, motor oil, baby milk powder, laundry & detergents, bathroom & toilet cleaners.Trade.
SPIN 12 is a highly refined mineral oil for use in the processing of natural and artificial fibres in the textile industry. APPLICATION SPIN 1 2 can be applied as spray or roll-on to the fibres o minimize friction in the drafting, ca.rding, twisting and weaving of the textile fabric. BENEFITS The low viscosity of the oil ensures easy application and penetration into the fibre. Protects and extends machine life through lubrication. Ensures clear, clear, non-staining and efficient processing.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
