CAS Number: 68308-53-2 Obtained by splitting and the subsequent vacuum distillation of soybean oil. The product obtained has a melting point above 25 C. Solid yellow or clear fluid at room temperature. Rich in linoleic acid and less in oleic acid. Soya Fatty acids are used among others application's: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins, and surfactants.
Linear Alkylbenzene Sulfonic Acid(LABSA . LAS)96% Linear Alkyl Benzene Sulphonic Acid (LABSA) 96% is the largest-volume synthetic surfactant that is widely used in the formulation of Domestic Detergent Powder, Cake & Dish wash cleaners. It constitutes the formulation of industrial cleaners and also acts as emulsifier and coupling agent. Full name: Linear Alkyl Benzene Sulphonic Acid Other name: LABSA, DBSA ;Dodecyl Benzene Sulphonic Acid;Dodecyl Benzene Sulfonic Acid ; Linear Alkyl Benzene Sulfonic Acid ; DDBSA CAS: 27176-87-0 EINECS No.: 248-289-4 Molecular Formula: R-C6H4-SO3H Molecular Weight:323 HS Code: 34021100.00
Chemical solvents like acetone, ethanol, ipa,mix xylene, mix toluene etc ( recycled, off grade, stock, contaminated, expired products.:
Hydrochloric acid, accetic acid, nitric acid, sulfuric acid, caustic soda, caustic flakes..
Deoxycholic acid (conjugate base deoxycholate), also known as cholanoic acid and 3�±,12�±-dihydroxy-5�²-cholan-24-oic acid, is a bile acid. Deoxycholic acid is one of the secondary bile acids, which are metabolic byproducts of intestinal bacteria. The two primary bile acids secreted by the liver are cholic acid and chenodeoxycholic acid. Bacteria metabolize chenodeoxycholic acid into the secondary bile acid lithocholic acid, and they metabolize cholic acid into deoxycholic acid. There are additional secondary bile acids, such as ursodeoxycholic acid. Deoxycholic acid is soluble in alcohol and acetic acid. When pure, it comes in a white to off-white crystalline powder form. EINECS No - 201-335-7 Color - White Powder Purity - 98% Function 1. treating and preventing cerebral thrombus; 2. Treating miocardial infarction; 3. Preventing high blood viscosity; 4. Treating angina pectoris, cerebral infarction, diabetes
Construction chemicals, dispersing agents, emulsifier & surfactants, agro fertilizer chemicals, tolyltriazole, potassium bromide, potassium chloride, potassium nitrate, potassium iodide, potassium nitrite, sodium citrite, stearic acid, xanthan gum, guar gum, citric acid anhydrous, citric acid monohydrate, soya lecithin liquid, sunflower lecithin, polyglycerol polyricinoleate (pgpr), sodium gluconate, benzotriazole.Exporter
Food commodities, agriculture products, chemicals seeds: sesame seeds, watermelon seeds, gum arabic chemicals: sulphuric acid 98% hydrochloric acid 33% sodium hypochlorite 10 12% sodium hydroxide 50% caustic soda flakes caustic soda prills 99% chlorine calcium chloride 36% petroleum products: en590 10ppm diesel automobile oils, lubricants mineral motor oil 10w30, 10w40, 15w40,20w40,20w50 transmission oil complex dexron ii complex dexron iii complex dexron iiii complex type a brake oil complex dot 3 complex dot 4 complex dot 5.1 cutting oil hydraulic oil.Distribution, import, export, trading services
DCO Fatty Acid is used in the manufacture of alkyd resins for paint, surface coating, printing inks & polyamides. Packing : Bulk Tankers, Stainless Steel Drums, ISO Tank, Flexi tank, HDPE Closed Head Drums 190 Kgs Net. It is used Fast Drying Alkyde Resin.
ANALYSIS VALUES Organoleptic Bright, clear; with absence of foreign odors and flavors Peroxide index 0.1 – 1.0 (meq O2 / Kg) Free fatty acid as oleic acid 0.03 – 0.07 (g / 100g) Lovibond color Yellow 10 – 15 (in 133.35mm cell) Red 0.6 – 1.5 (in 133.35mm cell) Unsaponifiable matter Max.: 1.00 (g / 100g) Soap Max.: 10 (ppm) Winter Test Oil will remain clear after cooling it for 24hs a 0ºC Moisture and volatile matter Max.: 0.05 (g / 100g) Impurities Will not contain naked eye Insoluble impurities Max.: 0.02 (g / 100g) Specific gravity at 25ºC 0.9133 – 0.9175 Refractive index at 25ºC 1.4706 – 1.4740 Iodine index 110 – 140 (g I2 / 100g) Saponification value 188 – 192 (mg OHK / g) Halphen – Gastaldi test Negative Linolenic acid Max.: 0.3 (as fatty acid / 100g of total fatty acids)
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.
Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Commodity : Potassium sorbate Molecular formula : C6H7KO2 Molecule Weight : 15022 HS code : 29161900 CAS : 24634615� Specifications appearance : White crystal granule Production Standard : FCCIV Content : 9801010 K2CO3 : 1 max Loss on drying : 1 max Chloride : 001 max Heavy metalsas : Pb 0001 max Packing in carton 25kgs net weight Quantity 14MT loaded into 1 x 20GP Excellent preservative properitesproperites Sorbic Acid Potassium Sorbate can restrain effectively the activity of mould yeast and aerophile bateria Restrain growth and reproduction of the pernicious micro organism as pseudomonas staphylococcus salmonella action to restrain growth is more powerful than killing Meanwhile it can not restrain useful microoranganim growth ad Anaerobicbearing barilli acidophil therefore to lengthen food store peroid and remain food original flavor The preservative efficiency of sorbic acid Potassium sorbate is 510 times sodium benzoate High safety Sorbic Acid Potassium Sorbate is one kind of nonsuturated fatty acid compounds It can be absorbed by human body rapidly then decomposed into CO2 and H2Omoreover no remaining in body ADI 025mgkg based on sorbic acid FAOWHO 1994 LD50 4920 mgkglarge mouse by mouth GRASFDA 1823640 1994 Its toxicity only 112 times table salts and 140 times sodium benzoate Good stability Sorbic Acid Potassium Sorbate is stable in sealed staus will not be decomposed until 270C It will be oxidized into colored ones and absorbing moisture in case exposed in air for a long time Wide application At the momentSorbic Acid Potassium Sorbate has been used extensively in food drinkvegetables in soy tabacco drugs cosmetics agricultural products forage and other domain Its applicaion should be wide and wide in the world As acidic preservative Sorbic Acid Potassium Sorbate is also used well in neutral foodph6065 The preservative efficiency of sodium benzoate will decrease clearly and have a bed taste while ph4 Applicaion flexibilitySorbic Acid Potassium Sorbate can be used by direct adding sprayingretting dry spraying using in packing material and other method
Sunflower seeds for making oil origin Ukraine high fat content 55,7 % Humidity % not more 6.5 Oil admixture% not more 7.0 Trash admixture % not more 2.8 Mass fraction of oil in terms of dry matter % no less than 55.91 Acid number of oil mg KOH/g % not more 2.51 packed in pp bags 25/50/1000 kg
Potassium Monopersulfate compound, a white, free flowing crystalline granule, is non-toxic, odorless, and easily soluble in water. It is an efficient, environmentally friendly, and multifunctional acidic oxidant. General Information Product Name Potassium Monopersulfate compound CAS 70693-62-8 Chemical formula 2KHSO5 KHSO4 K2SO4 Molecular weight 614.7 Specification Appearance White, free flowing granule Available Oxygen, % 4.5 KHSO5,  % 42.8 Loss on Drying  % 0.15 Bulk Density, g/L 0.80 pH (10g/L,25 C) 2.0 .4 Sieve Residue on 75 m test sieve, % 90.0 Packaging Product is packaged in plastic woven bags lined with polyethylene film, with a net weight of 20kg/bag or 50kg, or the packaging form and net content can be determined through negotiation according to customer requirements. Storage Store in a cool and well ventilated warehouse to prevent exposure to sunlight, rain, and moisture. Prohibit mixing with reducing substances for storage.