Usb Charging Disinfection Gun Cordless Suppliers and Manufacturers

This mini portable air conditioner can use a battery to be taken outdoor. This portable air cooler can be used also for your pets during summer. You can use portable battery or just charge it via USB. It is very economic as the the electricity that uses is only 2.5 watt. Measurements: 13.1*13.1*17cm Weight: 650 g. It has a water tank of 450ml that can be used for 4-6 hrs. Use battery of bigger than 10,000 mAh.

This mini portable air conditioner can use a battery to be taken outdoor. This portable air cooler can be used also for your pets during summer. You can use portable battery or just charge it via USB. It is very economic as the the electricity that uses is only 2.5 watt. Measurements: 13.1*13.1*17cm Weight: 650 g. It has a water tank of 450ml that can be used for 4-6 hrs. Use battery of bigger than 10,000 mAh.

Portable Hair Nano Steam Gun Blue Ray Sterilizer Anion Electric Disinfents Nano Spray Gun Atomizing Sterilizer&Nano Spray Gun Wireless blue ray sterilization is safer Both diluted disinfection alcohol can be sprayed Room Temperature Disinfection Electrostatic Adsorption Wireless& Rechargeable Lighter Weight Portable Anti-clogging Nozzle Adjustable Spraying Intensity

Item: OA012 Color: Gold/ Pink /Gray/Black/Blue/Red Length: 1.2m / 1.5m Material: Aluminium alloy shell & Nylon braided jacket Function: Quick charging + data transfer Output: 5V 2A Port: Iightning

Item: OA014 Color: Rose gold/ Gold/ Gray/Red/Blue Length: 1m Material: Aluminium alloy shell & Nylon braided jacket Function: Quick charging + data transfer Output: 5V 2.4A Port: Micro/ Iightning/Type-C

Item: OA018 Color: Rose Gold/Red/Gray/Gold Length: 1m Material: Aluminium alloy shell & Nylon braided jacket Function: Charging + data transfer Output: 5V 2A Port: Micro/ Iightning/Type-C

Place of Origin:China Brand Name:St.Rosen Model Number:ST-WHQ01 Type:HVLP, HVLP Application:Disinfection spray gun Cup Volume:200ML Weight:1.35kg power cord:3 Warranty:1 Year rated voltage:220-240V / 50Hz inner box size:25 * 10.5 * 24cm product size:22 * 9.5 * 23cm power:1200w

Power Bank > PB-12000mah Product Name : power bank 12000mah Product Description Electric core 18650 battery roduct Size 138*62*22mm N.W 208g Material ABS+PC Input 5V-1A Output USB 5V-1A Auto-sleep Smart over charge, dis-charge,over-load, short curcuit protection.

Item Value Model No GLC-6S Light source one main light two auxiliary lights Rated voltage 3.7V Main light current 400mA - 530mA - 1000mA Power of main light 2.96W Illuminous 385lum Brightness 9000lux - 14000lux - 18000lux Battery Capacity 6.8Ah Battery cycles 1200 Working time 17hrs - 13hrs - 6hrs Weight 245g Water-proof grade IP68 Protection grade Ex ia

GL2.5-C 170g Light Weight Economic 10000 Lux Cordless Mining Cap Lamps with USB Charger Waterproof IP68 Product Introduction of GL2.5-C Cordless Mining Headlamps GL2.5-C cordless mine lamp cap lamp uses 1pc 1W high power Cree LED as the main lamp, has six auxiliary lamps, and uses high performance 3.8Ah rechargeable lithium-ion battery design. The button emits red light when charging and green light when charging full. The cap lamp has high intensity of 10000 Lux, long illumination time, long life, high intensity, light weight 170g, low cost and high safety. Main Features of GL2.5-C Cordless Mining Headlamps 1. 10000Lux cordless cap lamp 2. Magnetic USB charger 3. Movable Stainless steel clip for changing lighting angle 4. small size and 170g light weight. 5. With DC charger up to your options for camping, sport (running, hiking). 6. Anti-explosive, waterproof IP68, Flame retardant, impact resistant. 7. Intelligent protection:with overcharge& over-discharge resistant function and short circuit protection device. 8. High Low beam (1pcs ML and 6pcs SMD AL) 9. Charging indication switch (Red-on charging -Green-full charging) 10. 13-15hours discharging time.

1. .Adopt 1 mini imported high brightness LED, long service life, the power consumption is small Brightness:8000-12000mcd 2. Products with a single li-ion rechargeable batteries 3. This product is equipped with a USB cable 4. Key ring style rechargeable flashlight, easy to carry, more convenient for your life 5. The products material: product body is: ABS, lampshade is: PC Charging: 1. When LED lights not bright or weak, please promptly with USB Charging 1.5 to 2 hours, after Complete charging, LED bead can continuously light 2 more hours 2 please put switch OFF to conserve electricity, when without charging. Color: silver,green Product Size 6.6*2.7 CM Weight 21.8 g Packing number 200 PCS G.W: 8.5 KGS N.W 7.8 KGS. Package size 32.8*31.8. whitebox or gifts package.

Weight 1.3Kg (2.87lbs) Dimension 9.48"x6.50"x2.36"(240x165x60mm) Load capacity 100 staples Operate pressure 3.5-6Kg/cm2(50-85psi) Length of staples 10mm(13/32")~25mm(1") Crown of staples 5.2mm(0.25") Size of staples 0.6x1.2mm(0.024"x0.048"). Color inner box packing,10pcs per carton390x350x270mm, Weight:13kg.

Remarkable features Skin cleaning and dispel dead skin and skin dregs. Able to remove dirt within pores and aging cuticle. Improve skin quality for better lift-up, whitening and health. Nutrition penetration, toxins and wrinkle removal. Repair body cells, speed up absorption of skin-care products. Painless, cleanliness, and deep skin cleansing. Decompose melanin, disinfect pimples and various skin problems. Shrinking skin pores to give glossy, shiny, white and healthy skin. Take away wrinkles and loosen skin. Skin massage with ion penetration to keep smooth and ageless skin. Intelligent time control for each ten minutes treatment. Compact and portable design with low power consumption. A cordless device for convenient use.

Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton

Removing dead skin cells is very important for healthy looking skin, and the process is to reveal the newer smoother skin underneath. The spatula can effectively removes dead skin cells and clean the pores, so its good for all skin types, imperatively for oily to combination skin; and it is suitable for sensitive and rosacea skin. The spatula could be beneficial to acne skin as it will push everything to the surface, be sure to use distilled water while treating acne with the spatula. (spray the distilled water to the treated area, then run Ultrasound Skin Spatula over it). Another great thing about our Ultrasonic Facial Skin Spatula is that it can help water-soluble skincare products (gels, serum, ampoules) to penetrate to the skin. Keeping our skin hydrated is essential, especially for those of you who travel a lot, from one climate to another sometimes can confuse our skin. People who live in a dry climate might be easier to adapt the changes. But for someone lives in humid climate and switch to a dry environment can really challenge his/her skin. By using Ultrasonic Facial Skin Spatula, we can easily keep our skin hydrated while on the go. Remarkable Features Skin cleaning and dispel dead skin and skin dregs. Able to remove dirt within pores and aging cuticle. Improve skin quality for better lift-up, whitening and health. Nutrition penetration, Toxins and wrinkle removal. Repair body cells, speed up absorption of skin-care products. Painless, cleanliness, and deep skin cleansing. Decompose melanin, disinfect pimples and various skin problems. Shrinking skin pores to give glossy, shiny, white and healthy skin. Take away wrinkles and loosen skin. Skin Massage with ion penetration to keep smooth and ageless skin. Intelligent time control for each ten minutes treatment. Compact and portable design with low power consumption. A cordless device for convenient use. Specifications INPUT VOLTAGE : AC 90 !V 240V OUTPUT VOLTAGE : DC 5V 500mA Li-ion 3.7V 560 mAh MAXIMUM OPERATING CURRENT : 600mA OUTRASONIC OUTPUT FREQUENCY : 25KHz NET WEIGHT : 140g SIZE : 220 X 84 X 30 mm (8.65 X 3.3 X 1.1 inch)

1.Detachable LED strength magnetic connection, durable Nylon surface. 2.L type, 90 degree design for game, playing and charging at same time 3.Self-adaptive device, Automatic switching, battery protection. 4.This cable is used for charging only, not for data transmission 5.Customized the connector for Android phone or type-C or iOS device. Tech for Off to College PCs, Tablets, and Accessories PCs, Tablets, and Accessories Headphones and Audio Headphones and Audio Phones and Tech Accessories Phones and Tech Accessories Have a question? Find answers in product info, Q&As, reviews Product description Production Name: Detachable Magnetic 90 degree connection and rotatable charging USB cable Material: TPE + Metal+ Aluminium+Nylon+LED lights Color: Black or Red or Silver or Golden or custom Current: Support 2400 mA(Max), Applicable product: Charging for Iphone device, Mircro device, type-C, Computer, video, etc, Function: Faster charging Length: 1M or customized Special Feature: 1)Strength magnetism and Automatic calibration to connect charging 2)Single hand to operate, convenient 3)L type, Playing and charging at same time, convenient 4)Standard configuration is one connector. If you need three connectors (android/ios/type-c), please contact us 5)This cable can not support data transmission!!!

Item: OA019 Color: Black/Red/Pink/Gray/Gold Length: 1m Material: Aluminium alloy shell & Nylon braided jacket Function: Quick charging+data transfer Output: 5V 2.4A Port: 2-in-1 Mirco/Type-C