Tempered Insulated Curved Glass Double Glazing Suppliers and Manufacturers

In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.

The treatment process of tempered glass is as when heating glass close to molten point, to carry out even and rapid cooling treatment on the surface of glass, this enhancing the strength and thermal stability. The glass will break into cellular pieces when the external force exceeds its strength. It is hence a highly safety glass. Wooden crate.

Tempered glass:in modern architecture, the designer has increasingly high requirements on safety and strength of the glass that is why tempered glass is widely used.Shanghai tob produces tempered glass and use a special heat treatment for the ordinary annealed glass, which results in the uniform stress on the surface as well as the tension stress inside of the glass to increase strength. Characteristics: The strength of tempered glass is four times bigger than that of the ordinary annealed glass When destroyed by outside force, the tempered glass forms bean-like particles to reduce the danger for human body It withstands the sudden change of temperature.(for instance, 5mm tempered glass withstands a temperature change of 200℃) The half-tempered glass has a very sound flatness and less optical aberration The half-tempered glass can be further processed as colored tempered glass which is excellent for decoration purpose Applications: Auto motives, trains, ships, construction outer wall, partition for inner decoration, shower room Furniture, automatic door, elevator, fireplace, etc. Specifications: Thickness for ordinary glass: 3--19mm Max.Size: 2400*8000mm Min.Size: 24*24mm Inner packing:blistering paper Outer packing:fumigation wooden case

Tempered glass We can produce all variety of glass, deep processing, glass, as well as engineering design for the installation of an integrated chain of economic entities. A variety of large-scale processing equipment, on 3-25mm glass straight edge, the hypotenuse, round edges, and so on the side of special processing. There are varieties of steel operation, emulsification, coating, bending, plastic folder, hollow, hot, hot, die-casting, caizuan carved, relief, such as glass polycrystalline dozens of varieties.

Tempered glass

Intex Glass (Xiamen) Co Ltd is a professional glass manufacturer in China with 15 years of experience. We produce tempered glass in 3mm to 19mm thickness for windows, doors, partition walls, shower doors, table tops etc. All of our glass products have found their end use as components in a wide variety of finished products manufactured by our customer base in North America, Europe and Asia. Flat tempered glass' specifications: Max: 2,600mm X 5,000mm Min: 100mm X 300mm Thickness: 3mm~19mm Bend tempered glass' specifications: Max: 2,400mm X 3,660mm Min: 600mm X 400mm Thinckess: 5mm~19mm Radius : 5~6mm radius í¦1,000mm 8~10mm radiusí¦1,500mm 12~19mm radiusí¦2,500mm Packing: Plywood Crates & End cap

Tempered glass owns super strength than normal glass. When it is broken, tempered glass will become oblique bean size granules to reduce damage to human bodies. Tempered glass also withstands quick temperature changes. 1. Flat tempered glass Thickness: 3mm~25mm; maximum size: 1700ºt3000mm and 2400ºt4800mm 2. Bended tempered glass Two sets of excellent quality bended glass equipment to service manufacture. 3. Extra-thin/ ultra-thin tempered glass 2mm to 3.5mm thickness extra-thin tempered glass is workable, and they are our top class products based tamglass. Wood crate

Its is mainly used in the buildings with natural lighting, transparence, elegant appearance, thus toughened glass is actually a kind of prestressing force glass. Methods of chemistry or physics are usually used to form the stress of pressing on the glass surface, so that the glass at first offsets the stress from surface layer while bearing the external force. All these thus improve weight-bearing capacity and tensile strength of the glass. There are two major advantages of the toughened glass: one is that the intensity is improved several times compared with the ordinary glass, bending strength is as much as 3-5 times of that of ordinary glass, shock resistance intensity is as much as 50 times of that of ordinary glass, and its security has also improved with its intensity. The second major advantage is that increase of bearing capacity improves fragile nature. And even toughened glass destroys and splits, the small chip are without acute angle, which reduces the injury to the human body greatly. Capacity to bear urgent coldness and urgent heat of toughened glass is as much as 2 times compared with the ordinary glass, and toughened glass can bear difference in temperature change of more than 150 centigrade, and bears obvious effect in preventing heat-explosion.

Tempered glass 3-19mm in thickness Exporting standard

Tempered glass Features: Tempered glass is heat-glass processed by heating annealed glass to the softening point and then quenching it by uniform blast of air evenly to both surface The tempered glass is subjected to a special heat-treatment of about 680 degree and afterwards cooled .If it is colled rapidly, the glass is up to 4 times stronger than before. When it gets broken it chatters into many small fragments which will not lead to major injuries It can be used in the constructions, automobile, train, ship, furniture, automatic door, escalator, etc. Specifications: 1).Thickness:4mm-15mm 2).Dimensions size:we can supply many special size to santisfy your requirement. 3).We have the ability of procession in cutting different size, polished the edges and making wired printing. 4). Applications: has been widely used in the scope of building, furniture, automobiles, electrical appliances etc. And enjoyed very high reputation among our regular customers . 5). Packing:goods are packed in standard export wooden box packing. Goods are packed in standard export wooden box packing.

Basic Concept: tempered glass refers to the safe glass resulting from the heating and cold treatment of common glass to make the mechanical strength of glass multiply. Specification for processing: Max: 1800 mmí-3660 mm Min: 200 mm 200 mm Thickness: 3mm--19mm

Tempered glass A single piece of specially heat treated glass, possessing mechanical strength substantially higher than ordinary annealed glass. When broken at an point, the entire piece breaks into small pieces that have relatively dull edges. According to customers' requirement

Tempered polish edge 10 mm Glass with countersunk holes holes notch cut out

Max size: 3300mm*11000mm, low-e coated, curved tempered glass is available

Order to meet the durability and safety needs, the glass can be processed by two types heat strengthening or tempering â?? depends on the specific application. For these two types, the glass has undergone a special heat treatment, about 650 Celsius to make it soft, then strong compression and cool processes followed in time to increase its strength and resistance. Compression of 6000 to 9000 psi will make it to be semi tempered glass, about 2 times more resistant than normal annealed glass of similar thickness. And Compression of 11000 to 20000 psi will make it to be fully tempered glass, about 4 or 5 times more resistant than normal annealed glass of similar thickness. This flat tempered glass can help to reduce the chances of injuries as it will be small blunt pieces when breaks. Advantages The flat tempered glass is a kind of prestressed glass actually, in order to improve the strength of glass, we usually use chemical or physical method to form compressive stress in the glass surface. In this way, thereby bearing capacity is raised and this technology enhances glass oneself to resist wind and pressure, cold and heat, impact, and so on. We have a skilled team of more than 10 years' experience, which can always do our best to support our clients sincerely. Applications Usually, flat tempered glass can be used in the following industries: 1.Construction, building templates, decoration industry (example: windows and doors curtain wall interior decoration, etc.) 2.Furniture manufacturing industry (glass tea table furniture of form a complete set, etc.) 3.Home appliance manufacturing industry (TV oven air conditioning products such as refrigerators) 4.Electronics and instruments industry (mobile MP3 MP4 watches and clocks, and other digital products) 5.Automobile manufacturing industry (such as car windshields) 6.Daily products industry (glass cutting board, etc.) 7.Special industry (military USES glass) Specifications Thickness:2~19mm Size: 100X100mm to3300X18000mm Types: clear float glass, ultra-clear float glass, tinted glass, reflective glass, low E, and so on. Packages 1. Cork pad between two sheets 2. Seaworthy wooden crates 3. Iron belt for consolidation

Tempered glass is a type of high strength glass with even compressive stress on the surface, which is made by float glass heated to nearly softening point and then cooled down rapidly by air. After the heat soak process, the explosion possibility of tempered glass is greatly reduce..

Place of Origin: Guangdong, China Brand Name: KXG Model Number: tempered glass Function: Heat Absorbing Glass, Heat Reflective Glass, Insulated Glass, Low-E Glass Shape: Curve, Flat Structure: Solid Technique: Clear Glass, Painted Glass, Coated Glass, Laminated Glass, Tempered Glass, Tinted Glass Type: Float Glass Product name: tempered glass roof Thickness: 3-25mm Color: Transparent, etc. Certificate: CCC/ISO9001/AS/NZS2208/IGCC Application: skylight Material: Qualified Float Glass Size: Custom Sizes Keywords: tempered glass roof

BGF tempered float glass is 3-5 times stronger than normal glass

Tempered glass is produced by first heating float glass to the softening point in tempered glass production line ,and then cooling the glass rapidly and averagely with high-speeded and high-pressured cold wind.the formation of uniform compressive stress on the surface of tempered glass and internai tensile stress effectively enhance the release of bending and impact.Glass Type Clear Glass, Tinted Glass, Reflective Glass, On-line Low-e Glass, Low-iron Glass Craft:Tempered Glass, Heat Strength Glass, Heat Soaked Glass Color:Blue, Green, Bronze, Gray,Golden etc. Thickness:5mm 6mm 8mm10mm 12mm 15mm 19mm Max Size Flat Glass:2440*6000mm Curved Glass:1000x2000mm Min Size Flat Glass:300x300mm Curved Glass:300*300mm Certificates:CE & CCC & CSI Architecture: Pool fencing glass, door glass, window glass, balcony glass,canopy glass, facade glass,balustrade glass,staircase glass, ect.. Furniture: table top glass, splashback glass, fireplace glass, counter top,shelves glass, ect.. Shower room:shower glass, shower enclosures, shower screens, ect..