"Stepper motor spec: 2 Phase bipolar 4 wires Rated Voltage 2V DC Rated Current 1.2A Phase Resistance: 1.7 Ohm ± 10% (20º C) Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms) Holding torque: 0.4 N.m Min. Shaft diameter: 5mm / 0.188"" (3/16"") Shaft length: 22mm Motor depth: 40mm Controller spec: Power supply: 12-36VDC Phase current Max 2.75A Full, half, 1/4th, 1/8th, 16th and 32th Microstepping"
"Stepper motor spec: 2 Phase bipolar 4 wires Rated Voltage 2V DC Rated Current 1.2A Phase Resistance: 1.7 Ohm ± 10% (20º C) Phase inductance: 4.5 mH ± 20% (1kHz 1 V rms) Holding torque: 0.4 N.m Min. Shaft diameter: 5mm / 0.188"" (3/16"") Shaft length: 22mm Motor depth: 40mm Controller spec: Wide supply voltage 12-48VDC Current per phase 3A or 6A, instruction adjustable Full step to 256th micro-stepping resolution Dual full H-bridge with PWM constant current control"
Item Specifications Step Angle 1.8íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Rotation CW( See from Front Flange)
Cloudray motor provides a range of 2-phase stepper motors and stepper motor driver with frame sizes from NEMA 17,NEMA 23,NEMA 24, NEMA 34. Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment. High Torque, High Precision and Long life is Cloudray's core advantages Stepper Motor characteristic: Low vibration,Low heating, No loss of step Fast Response,Better Acceleration Performance Higher Resolutionï¼?Avoidance of Resonance Regions Sturdy structure, extremely long life High quality materials including bearings and shaft made in Japan Short length and light weight allow them to be used in highly integrated systems ISO 9001, CE, RoHS international quality certification, reliable products.
Cloudray motor provides a range of 2-phase stepper motors and stepper motor driver with frame sizes from NEMA 17,NEMA 23,NEMA 24, NEMA 34. Cloudray stepper motor and Stepping Motor Driver are widely used in engraving machine, cutting plotter, textile machine, 3D printer, medical devices,stage lighting equipment, robot, CNC machine, music fountain and other industrial automatic equipment. High Torque, High Precision and Long life is Cloudray's core advantages Stepper Motor characteristic: Low vibration,Low heating, No loss of step Fast Response,Better Acceleration Performance Higher Resolution Avoidance of Resonance Regions Sturdy structure, extremely long life High quality materials including bearings and shaft made in Japan Short length and light weight allow them to be used in highly integrated systems ISO 9001, CE, RoHS international quality certification, reliable products.
* 4 pcs nema 17stepper motor 17h2a8415 (52ncm, 73 oz.In) in bipolar connection. * 4 pcs micro-stepper motor driver 2l415b, peak 2.0a, up to +40vdc
* 4 pcs nema 17stepper motor 17h2a8417-01a (52ncm, 73 oz.In) in bipolar connection. * 4 pcs micro-stepper motor driver 2l415b, peak 2.0a, up to +40vdc
* 4 pcs nema 17stepper motor 17h2a8413 (52ncm, 73 oz.In) in bipolar connection. * 4 pcs micro-stepper motor driver 2l415b, peak 2.0a, up to +40vdc
The UCP300 stepper motor peristaltic pump have superb features built-in and flexible design to meet specific customer needs. Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM peristaltic pump powerful functions.
Nema 34 bipolar stepper motor for cnc router Homepage: www.Eaglecnctec.Com Features of nema 34 step motor model. 85bygh450a /86bygh450a Currency 4a Step angle 1.8â° Phase two Holding torque: 21kg/cm =2n.M = 285 oz-in Shaft diameter: 12.7 / 14mm Net weight: 2.4kg Features of bipolar stepping motor model. 85bygh450b /86bygh450b Currency: 5a Step angle: 1.8â° Phase: two Holding torque: 60kg/cm =5.88n.M =840 oz-in Shaft diameter: 12.7 / 14mm Net weight: 3.5kg -
Stepper driver controls the stepper motor moving, move direction and moving steps. Step driver micro the motor steps, so ensure the precision. CNC driver is widely used on CNC router, cnc laser machine, cnc plasma cutting machine, cnc wood lathe machine, etc. Besides cnc machines, we also supply original Yako drivers and Leadshine drivers to support our customers. Leadshine series we have these models: DMA860H DM856 DM542-05 DM442 DM1182 Yako series we have: YKD2608MH YKA2811MA If any other requests, also can contact with us. We will do our best to support you.
1 PC Closed loop Stepper Motor Nema34 86HBM80-1000-1 6A 900N-cm(1270oz-in) 1 PC Mactching Driver WTSS880 1 pc extra 3 M length cable Technical Specifications Part No.: 86HBM80-1000 Frame Size: NEMA34 Step Angle: 1.8 degree Voltage: 2.4V Current: 6.0A/phase Resistance: 0.4 Ohm/phase Inductance: 6.5 mH/phase Holding torque: 9N.m 1275oz-in Rotor inertia: 2300g-cm2 Number of wire leads: 4 Weight: 5 kg Length: 142mm
Step Angle: 0.9 degree per full step step angle accuracy: +/-5% ( full step, no load) Temperature Rise: 80 degree max(rated current, 2 phases on) ambient temperature range: -20 degree to +50 degree Dieletric strength: 500VAC 50Hz 1mA 1Minute Motor weight: 150g to 350g/pc
Nema17 40mm Stepper Motor specification same as 17HS3001-20B Square flange face planetary gearhead Ratio near 14:1 Even though you have Mounting Plate for Nema17 Stepper, this geared stepper with mounting plate upfront is not bad. The flanged gearhead stepper was designed for cleaning robot.
Nema17 40mm Stepper Motor specification same as 17HS3001-20B Square flange face planetary gearhead Ratio near 14:1 Even though you have Mounting Plate for Nema17 Stepper, this geared stepper with mounting plate upfront is not bad. The flanged gearhead stepper was designed for cleaning robot.
General Specification Cold insulation resistance of the motor conductive part to the housing is no less than 100M¦¸ Insulation Dielectric strength:the conductive part and the housing of the motor with stand 500V lasting 1min. for pressure proof experiment but can not be punctured. Temperature
Hybrid stepping motor Item specifications Step angle 1.2 or 0.6 Step angle accuracy 5% (full step, no load) Resistance accuracy 10% Inductance accuracy 20% Temperature rise 80c max.(rated current, 2 phase on) Ambient temperature -20c~+50c Insulation resistance 100m ¬+ min. , 500vdc Dielectric strength 500vac for one minute Shaft radial play 0.02max. (450 g-load) Shaft axial play 0.08max. (450 g-load) Max. Radial force 220n ( 20mm from the flange ) Max. Axial force 60n Insulation class b
Step Angle 1.8fp or 0.9fp Step Angle Accuracy f+5% (full step, no load) Resistance Accuracy f+10% Inductance Accuracy f+20% Temperature Rise 80fpC Max.(rated current,2 phase on) Ambient Temperature -20fpC~+50fpC Insulation Resistance 100M ¬+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
Item Specifications Step Angle 1.8 Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 28N ( 20mm from the flange ) Max. axial force 10N Rotation CW( See from Front Flange ) Step motor, stepping motor, stepper motor, hybrid stepping motor, stepping
Item Specifications Step Angle 0.72íp or 0.36íp Step Angle Accuracy í+5% (full step, no load) Resistance Accuracy í+10% Inductance Accuracy í+20% Temperature Rise 80ípC Max.(rated current,2 phase on) Ambient Temperature -20ípC~+50ípC Insulation Resistance 100M ª+ Min. ,500VDC Dielectric Strength 500VAC for one minute Shaft Radial Play 0.02Max. (450 g-load) Shaft Axial Play 0.08Max. (450 g-load) Max. radial force 220N ( 20mm from the flange ) Max. axial force 60N Insulation Class B
