ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Feldspar is primarily used in industrial applications for its alumina and alkali content. Feldspar is a naturally occurring anhydrous, inorganic, igneous rock. The fusibility of the mineral makes it useful raw material for manyapplications and the purity is the indication of better fusibility in the application. There are two types of it depending On Na2O and K2O SODA FELDSPAR POTASH FELDSPAR CERAMICS ENAMEL FRITZ & GLAZED INSULATORS GLASS MILD ABRASIVES PICTURE TUBES SANITARYWARE TABLEWARE VITRIFIED TILES WELDING ELECTRODE Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders. TYPICAL CHEMICAL COMPOSITION OF POTASH FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 66 68 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.03 0.06 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 00.00 6. Magnesium - (MgO) % 00.00 7. Soda - (Na2O) % 2 3 8. Potash - (K2O) % 10 12 9. Loss on Ignition - (LOI) % 0.10 0.20 TYPICAL CHEMICAL COMPOSITION OF SODA FELDSPAR Index Compound Unit Result 1. Silica - (SiO2) % 68 â?? 72 2. Alumina - (AI2O3) % 17 18 3. Iron - (Fe2O3) % 0.10 0.15 4. Titanium - (TiO2) % 0.03 0.06 5. Calcium - (Cao) % 0.05 0.20 6. Magnesium - (MgO) % 0.10 0.15 7. Soda - (Na2O) % 9 10 8. Potash - (K2O) % 0.50 0.20 9. Loss on Ignition - (LOI) % 0.10 0.20
China Clay is a naturally hydrated Aluminum Silicate. It is one of the most abundantly available clay in the Earth scrust. Pure grade of China clay or kaolin clay produce by the processes of levigating. China Clay is also called â??KAOLINâ??, it is one of the essential Raw materials for Ceramic Industries, China Clay does not swell on adding water & Alumina present in Clay do not form Isomorphism series with any other metallic compound. China clay products are immensely used in the manufacturing of ceramics, papers, paint colors,vitrified tiles, soap, ultramarine and in various other purposes. As per requirement Custom sizes and Material of required specifications can be made in case of Bulk and Regular orders TYPICAL CHEMICAL COMPOSITION OF CHINA OR KAOLIN CLAY Index Compound Unit Result 1. Silica - (SiO2) % 47.73 2. Alumina - (AI2O3) % 36.41 3. Iron - (Fe2O3) % 00.21 4. Titanium - (TiO2) % 00.42 5. Calcium - (Cao) % 01.08 6. Magnesium - (MgO) % 00.39 7. Soda - (Na2O) % 00.23 8. Potash - (K2O) % 00.08 9. Loss on Ignition - (LOI) % 13.15
Minimum Order Quantity: 50 Piece Color :ALL Product Type : THOBE Fabric ; Cotton Size : Small,Medium,Large,Free Size,All Sizes We are Manufacturer, Exporter wholesaler of Arabic Thobes / Jubba. We have various types of design and pattern in our collection. Our material finished in very good fabric no compromise in quality. We have Exclusive range.We keep on launching new designs at regular intervals We can provide all type of quality and range as per buyer requirement and satisfaction. Additional Information: Item Code: BKS-20117 Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer) Port of Dispatch: Nhava Sheva Production Capacity: 100000 Delivery Time: 8 - 10 Days Packaging Details: Single Piece Packed in Single Poly Bag.
Thobe With Black Contrasts And Black Looser (Rib Material) In Cuff Collar Rs 700 / PieceGet Latest Price Minimum Order Quantity: 50 Piece Pattern Plain Occasion Casual Work Designer Sleeve Type Full Sleeves Wash Care Dry clean Special In Arabic Thobe /Jubba for Men : We are Manufacturer, Exporter & wholesaler of Arabic Thobes / Jubba. Faceook : Bhaijaan Kurta Studio Instagram : Bhaijaan Kurta Studio We have various types of design and pattern in our collection. Our material finished in very good fabric no compromise in quality. We have Exclusive range.We keep on launching new designs at regular intervals. We can provide all type of quality and range as per buyer requirement and satisfaction. Product Type: Thobe / Jubba / Kandura Material: Cotton - Polyester mix, Polyester, Cotton. Fabric Type: Mesh Technics: Designer Thobes, Embroidered, Patterns Feature: Eco-Friendly, Water Soluble, Other Decoration: Printed, Corduroy, Coloring Pattern Fabric Color: All Additional Information: Item Code: BKS-56 Production Capacity: 100000 Delivery Time: 8-10 Days, After Payment Received Packaging Details: Single Piece Packed in Single Polybag
Featured Juices & Purees Organic Apple Juice Concentrate Organic Blackberry Juice Concentrate Organic Strawberry Puree & Juice Concentrate Organic Mango Puree Organic Peach Puree Organic Pear Puree Pink Guava Puree Concentrate Dark Sweet Cherry Juice Concentrate Pineapple Juice Concentrate Passion Fruit Juice Concentrate Pomegranate Juice Concentrate NFC Lemon Juice NFC Orange Juice NFC Apple Juice Sweet Potato Juice Concentrate ... and many others, please let us know what you are looking for! Organics YAAX offers Organic Fruit and Vegetable Juices and Purees in many varieties.� Availability of organic products may be limited depending on the variety and season. The best time to contract for these products is just prior to the harvest season. Please contact us for your organic needs. Featured Organics: Apple Juice Concentrate Blackberry Juice Concentrate Strawberry Puree & Juice Concentrate Mango Puree Peach Puree Pear Puree Broccoli Puree Butternut Squash Puree Fruit Varieties - Juices, Purees, Concentrates Acai Cranberry Pear Acerola Exotics Pineapple Apple Guava Plum Apricot Kiwi Pomegranate Avocado Lemon Prickly Pear Banana Lime Raspberry Black Currant Mango Red Grape Blackberry Melon Strawberry Blueberry Orange Tomato Cherry Papaya Tropicals Coconut Passion Fruit Watermelon Concord Grape Peach White Grape Vegetable Varieties - Juices, Purees, Concentrates Asparagus Cilantro Onions Beet Corn Potato Bell Peppers Cucumber Pumpkin Broccoli Egg Plant Rhubarb Butternut Squash Green Pea Spinach Cactus Hot Peppers Sweet Potato Carrot Jalape�±o Zucchini Celery Kale Frozen & Aseptic YAAX offers Juices and Purees in Frozen form, and in many cases can also offer the product in Aseptic packaging. Single Strength Brix Values for Juices and Purees Acerola 6 Guava 7.7 Apple 11.5 Honeydew melon 9.6 Apricot 11.7 Kiwi 15.4 Banana 22 Lemon* 24.5 Blackberry 10 Lime* 24.5 Blueberry 10 Loganberry 10.5 Boysenberry 10 Mango 13 Cantaloupe Melon 9.6 Nectarine 11.8 Carambola 7.8 Orange** 11.8 Carrot 8 Papaya 11.5 Casaba Melon 7.5 Passion Fruit 14 Cashew (Caju) 12 Peach 10.5 Celery 3.1 Pear 12 Cherry, dark, sweet 20 Pineapple 12.8 Cherry, red, sour 14 Plum 14.3 Crabapple 15.4 Pomegranate 16 Cranberry 7.5 Prune 18.5 Currant (Black) 11 Quince 13.3 Currant (Red) 10.5 Raspberry (Black) 11.1 Date 18.5 Raspberry (Red) 9.2 Dewberry 10 Rhubarb 5.7 Elderberry 11 Strawberry 8 Fig 18.2 Tangerine** 11.8 Gooseberry 8.3 Tomato 5 G
Kitchen cabinet, vanity unit, wardrobe, furniture, wood, hardware, interior door, pvc door , lacquared door, melamine door, mdf door set, frame, case.
Citral is an acyclic monoterpene aldehyde, and being a monoterpene, it is made of two isoprene units. Citral is a collective term which covers two geometric isomers that have their own separate names; the E-isomer is named Geranial (trans-Citral) or Citral A. The Z-isomer is named Neral (cis-Citral) or Citral B.
The notation DAP 10-46 refers to a type of fertilizer that contains a specific ratio of nutrients. In this case, DAP stands for Diammonium Phosphate, and the numbers 10-46 represent the percentage by weight of nitrogen (N) and phosphorus pentoxide (Pâ??Oâ??) in the fertilizer. 10% Nitrogen (N): Nitrogen is essential for plant growth and is a crucial component of proteins, enzymes, and chlorophyll. It plays a significant role in promoting leaf and stem development. 46% Phosphorus Pentoxide (PO): Phosphorus is important for root development, flowering, and fruiting in plants. It is a key component of DNA, RNA, and ATP (adenosine triphosphate), which are vital for energy transfer in cells. So, the DAP 10-46 fertilizer is a high-phosphorus fertilizer with a substantial amount of nitrogen. It is commonly used to promote root development, stimulate flowering, and enhance fruit and seed production in various crops. This type of fertilizer is often applied before planting or during the early stages of plant growth, depending on the specific needs of the plants being cultivated. As Ark Global Kimya, we do DAP Fertilizer wholesale and export in Turkey
Product Specification Grade A Solubility Soluble in vegetable oil Feature Used to treat diarrhoea ,They are economical ,Require lesser storage space Packaging Type 1 kg , 5 kg , 15 kg,40 kg , 200 kg Barrel . Boiling Point 215 Degree Flash Point 115 degree Fahrenheit Country of Origin Made in India Minimum Order Quantity 1 Unit Product Description Our company has earned accolades in offering Cumin Seed Oleoresin 10% VOC to the clients. This product is known for its high quality. This product is highly appreciated by clients in the market. This product is to be used for flavouring of various perfumes and food products. This product is offered in high-quality oleoresin cumin to most valued customers who are situated all-round the nation. Additional Information Delivery Time 4-5 Days Packaging Details 100 ml / 250 ml / 1 kg / 5 kg
ICUMSA45 OTG Miami Quantity: 375,000 MT PROCEDURE FOR OTG: ICPO + Bank Comfort Letter Visit the Warehouse (they'll hold until 3/18, then first come, first serve) Close PROCEDURE: U.S. Nationalized Product DDP (Contract): Price: $500 per MT + Comms 1. The Buyer issues a signed Letter of Intent (LOI) or Purchase Order (ICPO) to the Seller. 2. The seller issues a full corporate offering (FCO). 3.The FCO is reviewed, signed and returned by the buyer within five (3) business days. 4. The seller issues the purchase contract. 5. The buyer reviews, signs, and returns the purchase contract within five (3) business days. 6. The seller signs the purchase contract and sends a copy to the buyer via email. 7. The buyer will be required to issue a proof of funds (POF). You can be: RWA BCL signed by two bank officers â?¢ Certification letter, in which the seller's bank officer can verify the funds with the buyer's bank officer. 8. The seller will then issue a POP once the funds have been verified. 9. The buyer will submit the SBLC draft so that the seller's bank can approve, so that, once approved, the buyer's bank can approve SBLCS MUST COME FROM THE TOP 25 U.S. BANKS. OR EUROPE, AND BE UNCONDITIONAL, IRREVOCABLE, UNRESTRICTED, TRANSFERABLE, CASH-BACKED. FREE OF CHARGE AND CONFIRMED WITH FULL BANK RESPONSIBILITY. The seller verifies and confirms, receiving the SBLC 10. Within ten (10) business days, Buyer will receive the completed shipping documents and Proforma Invoice (PI), once the vessels are loaded and ready to depart for the U.S. port. 11. Approximately (20 24) business days later, the sugar will arrive at the designated U.S. port facilities and the Buyer will be notified. Once the shipment has been verified by the government port authorities, the Buyer will receive the completed shipping documents, U.S. Customs Clearance, and Nationalized Sugar Certificates, along with the location of the port facility. 12. After the Buyer or its representative has carried out the inspection of the product and documents, the Buyer shall pay the full payment of the sugar, on the same day of the inspection, to the bank account designated by the seller. 13. The Seller shall transfer title to the Buyer. 14. The Buyer will be responsible for collecting the product at the port facilities within thirty (30 days).
Emu Maintenance Feed (E060416) Product Details : Crude Protein% : 16 Fat % : 3.5 Linoleic Acid % : 1.4 Lysine % : 0.63 Metabolizable energy(kcal/kg) : 2400 GENERAL DETAILS Ingredients :� Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) - 12 Product Form :� Coarse Mash Form / Pellet Form Product Branding -� HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :� As per IS:2052 Proximate Analysis on Dry Matter Basis Our organization set a unique position in the market by providing a wide gamut of� Emu Maintenance Feed� in the market. Together with this, the offered quality approved collections of the product is admired for long shelf life, high effectiveness, precise composition, and safe to use.
Piglet Starter Feed (P-020221) Product Details:� Crude Protein, (% Minimum) : 20.4 % Crude Fat (% Minimum) : 2.0 % Crude Fibre (% Maximum) : 5.0 % Moisture (% Minimum) : 11.0 % Acid Insoluble Ash (% Maximum) : 4.0 % Feeding Recommendations First feed for lightweight, early-weaned pigs weighing 5-10 lb. Can be used as a creep feed. Feed multiple times daily, delivering small quantities on mats. Can be mixed with water to produce a gruel. Provide a source of clean, fresh water at all times. GENERAL DETAILS : Ingredients :� Corn Gluten Meal, DDGS, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) : 12 Product Form :� Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :� As per IS:2052 Proximate Analysis on Dry Matter Basis
Emu Starter Feed E010320 Owing to our years of experience in the respective domain we are engaged in offering our clients 100 vegetarian and healthy EMU Starter Feed Ingredients like cereal grains pulses soy meal essential amino acids vitamins minerals with micotoxin aflatoxin and mold binders are used in the production of feed Our feed is not only healthy but free from any adulterant and completely safe for consumption Product Details Crude Protein 20 Fat 30 Linoleic Acid 104 Lysine 10 Metabolizable energykcalkg 2700 GENERAL DETAILS Ingredients  Corn Gluten Meal DDGS Pluses Essential Amino Acids Vitamins Minerals Trace Minerals Toxin Binders and Mold Inhibitor Ingredient Profile  100 Vegetarian Moisture Maximum 12 Product Form  Coarse Mash Form Pellet Form Product Branding  HAF Net Weight  39 Kgs When Packed Product Pricing  On Unit Basis for each 39 Kgs Packing Production Capacity per Day  450 MTDay Factory Visit  Not Permissible Fumigation  Aluminum Phosphide or Methyl Bromide or any as per buyer specification Clinical Test Methodology  As per IS2052 Proximate Analysis on Dry Matter Basis
