Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Natural gas with delivery Hub Baumgarten - AUSTRIA /EUROPE /or Turkish measurement centers The contract amounts to 5 billion m3 per year. The following documents are required to submit an application: - Agreement with a hub or Turkish settlement unit. - Full CIS company. -LOi - Consumer list. All documents must be from the same company and for the same company. Documents prepared on the basis of a partnership agreement from different companies are not accepted. The procedure and the complete package of documents will be provided to the buyer or his official representative. Only scanned documents are accepted.
There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.
We ANA COMPANY are direct authorized suppliers of petroleum products such as Class 54 and Class A1 jet fuel, D2 Diesel, Virgin D6, LCO, AGO, BITUMEN, JP54, D6, MAZUT, LNG, LPG, ESPO, EN590, JETA1, JETFUEL, UREA 46%, GASOLINE, GAS-OIL and other petroleum products. CIF, FOB, TTO and TTV ORIGIN ; KAZAKHSTAN, OMAN, KYRGISTAN. basis you or your buyer are interested and have accepted the terms, you should send an official ICPO as soon as possible to close the deal. We also have a reputable tank warehouse available to buyers and sellers worldwide to provide warehousing services for all types of petroleum products and FOB Spot transactions. Our warehouse terminals are available in Houston, the port of Rotterdam in the Netherlands and enable the safe transport of goods to any port in the world. Please contact us via the channels below for further information.
Liquified petroleum gas (lpg)..Supply and transport (lpg) cargoes to south and southwest asia (especially uae), africa, china
Petroleum products like en 590 grade 10 ppm, jet fuel a1 grade, lsdo, fuels for automobiles, fertilizers like urea 46, npk, all types of phosphates, potassium and nitrogen. iron ore hematite and magnatite grades 62%, 65.5%, 68% and 72% fe grades in fines and lumps. hms scrap 1&2; rail scrap r 50 r 65 grades..
Dear buyer! We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export. Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively). contact us for the procedure. Note: Seller do not work according to someone else's procedures. The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
Paraffin are products produced in oil refineries, from the deparaffination of mineral oils. Paraffins have many applications and are available in different formats: solid paraffin (slabs, pellets, powder) and liquid paraffin. Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike. Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available. If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !
Product Details: Form : Liquid Storage : Dry Place Grade : Industrial Grade Application Industrial Supply Ability : 2500000 Kilograms Per Month Price And Quantity Minimum Order Quantity : 50 Kilograms Product Specifications Application : Industrial Form : Liquid Storage : Dry Place Grade : Industrial Grade Trade Information Payment Terms : Cash in Advance (CID) Supply Ability : 2500000 Kilograms Per Month Delivery Time : 1 Week Main Domestic Market : All India Product Description One of the most important fuels these days is Jet Fuel. It is a middle distillate oil that is used for jets all around the world. It has some of the critical qualities such as freeze point, smoke point, flash point and more. It works when compressed air is prayed with this fuel and it leaves an electric spark that lights the mixture. The gas then expands and blast out through the nozzle at the backside of the engine. The engine and the aircraft moves forward with the backward movement of gas. Thus Jet Fuel is one of the essential fuels for air transport
Medrop Paraffin Gauze Dressing / Tulle Dressing 10cm * 10cm ME106 Specifications: Paraffin acts as a soothing agent. The antibiotic/antiseptic in it helps in the healing process. Interlocking gauze yarn threads, minimize when dressing is cut to shape. Does not stick to the wound and does not disturb the dressing process. Due to special type of butter paper loss of medicine after removal of butter paper is minimum. Description Paraffin Gauze Dressings are used to dress denuded areas and hence these gauze are specially coated with soft paraffin jelly. The paraffin dressing, paraffin gauze dressing is non-adherent, non allergenic gamma sterilized, the speedy recovery of wounds helps by paraffin gauze. Used in the treatment of ulcers, burns, skin grafts (both donor and receptor sites) and various traumatic injuries. These paraffin dressing, paraffin gauze dressing are used directly over the contact layer.
EN590 10PPM FOB Rotterdam / Fujairah Tank To Vessel Refinery Tank To Vessel/dip & Pay Procedure 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents: ATSC - Authority to sell and collect Seller TSR DTA - Dip Test Authorization PRODUCT PASSPORT - Product analysis report from a renowned inspection company. Statement Of Product Availability Duly Signed AND Notarized By The Appropriate Authorities. Commitment Letter To Supply ATV Authority to verify the existence of the product via email or phone call. 4. Buyer obtains port and terminal access permit through the tank farm in order to gain access to conduct dip test 5. After a successful Dip Test in Sellerâ??s tanks, Buyer takes over seller's tank or Seller injects into buyer's vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT. 7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all intermediaries involved in the transaction
White mineral oils are highly refined mineral oils, and are composed of saturated aliphatic and alicyclic nonpolar hydrocarbons. They are odorless, tasteless, colorless, hydrophobic, and donot change their color over time. The oil is biologically and chemically stable, and doesnot support pathogenic bacterial growth, which makes it the standard choice of oil in most industries.
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.