Kids RC helicopters and skyhero multi-rotors.
Helicopters..
RC toys, RC helicopters, RC aircraft, RC cars, RC boats, RC planes, RC models, helicopters toy.
with light/transparent wheels/has battery & charger Packing: window box CBM:0.290cbm PCS/CTN:36 G.W.:28KGS N.W.:24.8KGS
RC toys, RC helicopter, RC plane, RC aircraft, remote control helicopter, RC flying.
RC toys, drones, RC helicopter, RC cars, wires , connectors.Manufacturer & exporter
-model:lbwr sd3650/5.5t -max amps50a -lipo cel2s -ni-mh ni-cd (cell)4-6s -kv(rpm/volt) 6650kv -resistance0.0072 -no-load curren£íº7.4v£©5.7a -diameterlength(mm)¦µ35.852.5 -mounting hole depth4mm -length of extend shaft15mm -shaft diameter (mm)¦µ3.175 -weight 170g -red leopard sd3650-6650kv sensored brushless motor for car -this motor can use for hobbywing xerun 120a
Connecting device Switch on the kds flymentor (make sure the main motor is disconnected), then plug the connection cable into the usb slot of the kds flymentor. The flymentor ppc will switch on and you can see the screen shown as below. After few seconds, the flymentor ppc will finished handshake with kds flymentor, you can see the main menu on the screen like picture2. The device type of kds flymentor is shown in title bar, it is "kds flymentor 3d" in the upper picture. Main menu There are nine items in main menu , each item contains a set of settings for flymentor. You can move the cursor to the item you want by press up and down, press ok you can enter the item and modify the settings. See table 1 for details of them. You can also press the load/save button here, then the load/save menu will be shown. Modify parameters When you press ok in the main menu, you will enter the settings section for some items, for example, the sixth item, 'tail gyro' settings, like the following picture. In this stage, you can select the parameter by press up and down, when the cursor is pointed to the value you want to modify, press ok, then the value will be shown as black background like picture 5. If you want to return back to main menu, press esc. Then you can modify the value by press up or down, after modification, press ok, the new value will be saved, or you can press esc to cancel this modification and the value will be restore. When you press ok, there will be a star character for few seconds, that means the parameter is being saved. -kds flymentor program card x 1 -connection cable x 1 -instruction cd x 1
RC drone helicopter, RC drone with camera.
Full function. Lateral drifting tyres. Die cast body. 4 Wheel Drive. Shock Absorber. Vehcle size: 48x30x25CM USB charging cable. Charging time: 4 hours. R/C distance: 30 - 35 Meters. Operation time: 15 - 20 minutes. Speed: 10 - 15 KMH Climbing angle: 15 degrees. 4 colors available: blue, orange, red, green. Age grade: 8+
Plastic building bricks high quality compatible with LEGO.
Plastic toys, sport toys.
Various kinds of high quality musical toys.
Various kinds of fashion model new dolls.
F rc planes, rc helicopters, drones, and rc cars/trucks.
Rc helicopter, rc gas boat, nitro rc car, remote control helicopter, remote control car, rc car.
H48 drone rc quadcopter Main Features: 2.4GHz control system: Ensures the stronger anti-interference performance and powerful signal 360-degree flip: The quadcopter will flip forward / backward / leftward / rightward according to your instructions 6 axis gyro: Provides the best stability during indoor and outdoor flight Colorful LED light: The drone will shine in the darkness, shows you the right flying direction and gives you a special look Super mini design: Easy to carry, takes it into your pocket and enjoys flight anywhere anytime Tumbling skill: It can realize 3D tumbling in four directions with colorful LED lights Speed switch: High-low speed modes can be changed by the transmitter
Features: Factory-assembled RTR large scale gas buggy Fully functional modular polymer roll cage Custom, pre-painted polycarbonate body panels Heavy duty 24mm front hex hubs Super HD driveshafts Single piece rear hub TF-45 2.4GHz FHSS radio system with failsafe Powerful pull start 26cc 2-stroke engine 4mm Aluminum monocoque chassis 700cc fuel tank for up to 45 minute runs High flow tuned muffler Sand rail fitted with off-road tires TSK-b Class 1 buggy fitted with HB Rodeo SC tires 6V, 3000mAh receiver pack with wall charger Big bore shocks with 6mm diameter shafts 8000 RPM performance clutch Full ball bearings Specifications: Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability Differential: Metal gear Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter Muffler: High-flow tuned Fuel Tank: 24oz (700cc) Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo Body: Pre-painted custom polycarbonate body panels Shocks: Big Bore valve variable control with 6mm diameter shafts Receiver Pack: 6V 3000mAh NiMH Ball Bearings: Full set Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount Tires: HB Rodeo SC Wheelbase: 22.5" (571mm) Ground Clearance: 2.4" (61mm) Includes: Baja 5B Sidewinder Sand Rail SX5 Buggy w/Kraken RC Sidewinder X5 Conversion K26 Gasoline Engine 2.4GHz 3-ch Radio Steering & Throttle Servos 100cc bottle of 2-Stroke Oil RX Battery Instruction Manual Needed To Complete: Gasoline
Features: Factory-assembled RTR large scale gas buggy Fully functional modular polymer roll cage Custom, pre-painted polycarbonate body panels Heavy duty 24mm front hex hubs Super HD driveshafts Single piece rear hub TF-45 2.4GHz FHSS radio system with failsafe Powerful pull start 26cc 2-stroke engine 4mm Aluminum monocoque chassis 700cc fuel tank for up to 45 minute runs High flow tuned muffler Sand rail fitted with off-road tires TSK-b Class 1 buggy fitted with HB Rodeo SC tires 6V, 3000mAh receiver pack with wall charger Big bore shocks with 6mm diameter shafts 8000 RPM performance clutch Full ball bearings Specifications: Chassis: 0.16" (4mm) pressed aluminum channel monocoque design with modular polymer roll cage Drive: Two wheel, steel dogbones with rubber boots, super heavy duty driveshafts, one-piece rear hub for increased durability Differential: Metal gear Engine: HPI fuelie K26 2-stroke gasoline engine with pull starter Muffler: High-flow tuned Fuel Tank: 24oz (700cc) Radio: 3-ch HPI TF-45 2.4GHz FHSS radio system with failsafe Servos: SFL-11MG metal gear servo 347 in/oz torque @ 6V, speed, 0.17 seconds/60°, SF-20W throttle servo Body: Pre-painted custom polycarbonate body panels Shocks: Big Bore valve variable control with 6mm diameter shafts Receiver Pack: 6V 3000mAh NiMH Ball Bearings: Full set Wheels: Front 4.7 x 2.4" (119 x 61mm), rear 4.7 x 3" (119 x 76mm) with beadlock mount Tires: HB Rodeo SC Wheelbase: 22.5" (571mm) Ground Clearance: 2.4" (61mm) Includes: Baja 5B TSK-b Class 1 Buggy w/Kraken RC Sidewinder X5 Conversion K26 Gasoline Engine 2.4GHz 3-ch Radio Steering & Throttle Servos 100cc bottle of 2-Stroke Oil RX Battery Instruction Manual Needed To Complete: Gasoline
Features: True Scale 4WD Class 1500 Unlimited Buggy Full Roll Cage Front: Independent Front Suspension Rear Solid Axle (Billet Aluminum CNC) Rear Trailing Arms (Billet Aluminum CNC) 4 LINK Suspension All Around CVDs All metal diff housing and hardened gears CNC cut metal transmission gears with adjustable slipper clutch Telescoping universal drive shaft Hard Anodized 38mm MegaShocks with 8mm shaft 1/4 Scale Servos Included All Metal Center Transmission with adjustable slipper clutch All metal gears in the differential housing Specifications: Type: CLASS 1500 Buggy 4WD Scale: 1/5 - 2 Stroke Gas Vehicle Engine Type: Zenoah 32cc G320RC with stock muffler (ARTR with Engine option) Servos: 1/4 Scale Servos Included for both ARTRs Length: 34.8in (884mm) Width: 22.83in (580mm) Height: 12.60in (320mm) Battery Box Dimensions L: 120mm W: 51mm H: 47.5mm Ground Clearance: 1.97in (50mm) adjustable to 3.98in (100mm) Wheelbase: 23.94in (608mm) Weight: 37.8 lbs (17.14 kg) - Without Motor Main Chassis: 5mm thick 6061 T6 aluminum Suspension: 2 Front-Wheel Independent with Rear Solid Axle Drivetrain: 4WD - Front and Rear Differentials with Center Transmission Tire Type: All Terrain Dominator, heavy threads for long wear. Medium compound Wheel Size: 7.32x2.91 in (186x74mm) Gear Ratio: 1:10.079 Servo Specifications: Kraken Model: TS-555HV (Waterproof) Operation Voltage: 6V-7.4V Torque: 555 oz/in @6V, 694 oz/in @7.V using 2S LIPO Speed: 0.19sec/60 at 6V/0.17/60@ 7.4V Rated Current: 3500mA @6V/4500mA@7.4V Continuous Current: 600mA @6V/ 700mA @7.4V Neutral Point: 1500us Dimensions: 82x30x56.5mm Weight: 7oz Gears Type: Metal Wiring White: Signal Wiring Red: 6V-7.4V Wiring Black: Ground Connector Type: Futaba or JR Ingress Protection: IPX7 Enclosure: Aluminum Anodized Case (Waterproof) Servos Warranty: 1 YR Limited Warranty **Warning: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300 Needed To Complete: 2.4GHz Radio System Receiver Battery Pack Gasoline 2-Stroke Oil WARNING NOTE: Kraken RC servos are incompatible with SPEKTRUM radios and may result in vehicle failure and loss of control. We highly recommend using only the following radios - Futaba 3PV, Futaba 4PL, Futaba 4PLS, 4PV, 4PX. If you want an affordable radio that works, you can use the Tactic 3TTX300
