R12T Fuel Water Separator For Racor Suppliers and Manufacturers

Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil The 10 PPM designation refers to the maximum allowable sulfur content in the fuel which is 10 parts per million ppm or less Here are some of the specifications for Diesel EN590 10 PPM Density at 15 C 820845 kgm Flash point minimum 55 C Cetane number minimum 51 Sulfur content maximum 10 ppm Distillation range 90 distilled at 360370 C Cold filter plugging point maximum 5 C Appearance Clear and bright free from visible sediment and water Diesel EN590 10 PPM is primarily used as a fuel for diesel engines in automobiles trucks buses and other vehicles It is designed to meet the stringent emissions standards in Europe and other regions which require lower levels of sulfur and other pollutants in diesel fuel The use of lowsulfur diesel fuels like EN590 10 PPM can help to reduce air pollution and improve air quality as well as reduce the emissions of greenhouse gases

Crude oil, often simply called "crude," is an unrefined petroleum product composed of hydrocarbon deposits and other organic materials. It is a liquid found underground that can be refined to produce various fuels, including gasoline, diesel, and jet fuel, as well as other products like plastics and chemicals. Classification: Based on its specific gravity (API gravity) and sulfur content, crude oil can be classified into: Light or Heavy: Determined by its API gravity with light crude oil being less dense and, therefore, more valuable than heavy crude oil. Sweet or Sour: Based on its sulfur content. Sweet crude has less than 0.5% sulfur, while sour crude has a higher sulfur content. Physical Characteristics: Color varies from yellow to black. Viscosity can range from water-like to thick and tar-like. Distinctive odor, often pungent. Applications: Fuel Production: Main source for gasoline, diesel, kerosene, and jet fuel after refining. Petrochemicals: Base for manufacturing chemicals, plastics, synthetic materials, and more. Lubricants: Processed to produce motor oil, grease, and other lubricating products. Asphalt: Used in road construction. Storage & Handling: Crude oil is typically stored in large tanks or transported in pipelines, tankers, or rail cars. Proper care is needed during transportation to prevent spills and environmental contamination. Note: Crude oil's quality and characteristics can vary widely based on its geographical origin and the conditions under which it was formed. Before refining or using, a detailed analysis is usually performed to understand its composition and how best to process or utilize it.

Coal is a sedimentary deposit composed predominantly of carbon that is readily combustible. Coal is black or brownish-black, and has a composition that (including inherent moisture) consists of more than 50 percent by weight and more than 70 percent by volume of carbonaceous material. Coal is primarily used as fuel to generate electric power all over the world. In coal-fired power plants, bituminous coal, sub-bituminous coal, or lignite is burned. The heat produced by the combustion of the coal is used to convert water into high-pressure steam, which drives a turbine, which produces electricity. The ranks of coals, from those with the least carbon to those with the most carbon, are lignite, sub-bituminous, bituminous, and anthracite. MOQ : 30,000 MT Supplied from Indonesia.

Price - Rs 1,400/ Kg Product Specification Usage/Application : Pharma Form : Crystal Packaging Size ; As per client requirement Brand : NT Botanical Name : Mint Leaves Country of Origin : Made in India Product Description Natural Menthol Crystals offered are used in most of the industries including in pharmaceutical, Food and in varied flavoring applications. These menthol crystals are also known by name of chemical name of 1-Methyl-4-Isopropyl Cyclohexane 3 and are colorless crystals with refreshing mint color. With solubility in Alcohol and slightly in water, these have cool sensation in mouth and are made by fractional distillation of menthol oil. Here, the distillation process yields pure menthol as fraction which is slowly cooled and then crystallized. The chilling is done that helps in separation of menthol. Having a characteristic odor of natural menthol as obtained from mentha avensis oil, some of the end usage areas of these natural menthol crystals include in food, toothpastes and cosmetics. Menthol crystal Supplier from india Additional Information Item Code : MT01 Delivery Time : 5-7 Days Production Capacity : 10 ton Packaging Details : 25 kg Drum

Bamboo charcoal is charcoal made from species of bamboo. Bamboo charcoal is typically made from the culms or refuse of mature bamboo plants and burned in ovens at temperatures ranging from 600 to 1200 �°C. It is especially porous charcoal, making it useful in the manufacture of activated carbon. Bamboo charcoal is made of bamboo by means of a pyrolysis process. According to the types of raw materials, bamboo charcoal can be classified as raw bamboo charcoal or bamboo briquette charcoal. Raw bamboo charcoal is made of bamboo plant parts such as culms, branches, and roots. Bamboo briquette charcoal is made by carbonizing bamboo residue, such as bamboo dust or saw powder, and compressing it into sticks or lumps. There are two equipment processes used in carbonization, one is a brick kiln process, and the other is a mechanical process. In East Asia and Africa, many people use bamboo charcoal as a cooking fuel, producing less air pollution than other charcoal. Like all charcoal, bamboo charcoal purifies water by reducing organic impurities, odorants, and chlorine. MOQ: 20 MT Supplied from India, Vietnam, and Indonesia

Bamboo charcoal is charcoal made from species of bamboo. Bamboo charcoal is typically made from the culms or refuse of mature bamboo plants and burned in ovens at temperatures ranging from 600 to 1200 �°C. It is especially porous charcoal, making it useful in the manufacture of activated carbon. Bamboo charcoal is made of bamboo by means of a pyrolysis process. According to the types of raw materials, bamboo charcoal can be classified as raw bamboo charcoal or bamboo briquette charcoal. Raw bamboo charcoal is made of bamboo plant parts such as culms, branches, and roots. Bamboo briquette charcoal is made by carbonizing bamboo residue, such as bamboo dust or saw powder, and compressing it into sticks or lumps. There are two equipment processes used in carbonization, one is a brick kiln process, and the other is a mechanical process. In East Asia and Africa, many people use bamboo charcoal as a cooking fuel, producing less air pollution than other charcoal. Like all charcoal, bamboo charcoal purifies water by reducing organic impurities, odorants, and chlorine. MOQ 20MT Supplied from India, Vietnam, and Indonesia

Sodium tripolyphosphate is an inorganic substance with chemical formula Na5P3O10. It is a kind of amorphous water-soluble linear polyphosphate. It is used as water retention agent, quality improver, pH regulator and metal chelator Main Application: Industrial use Used as detergent, auxiliary, also used in petroleum, metallurgy, mining, paper making, water treatment, etc.. Mainly used as synthetic detergent additives, synergist for soap and soap to prevent a fat separation and bloom. It has a strong emulsifying action on lubricating oils and fats and can be used to regulate the pH of buffer soap solutions. Water softener for industrial water. Tanning agent. Dyeing assistants. Paint, kaolin, Magnesium Oxide, calcium carbonate and other industries in the preparation of suspension as a dispersant. Drilling mud dispersant. The paper industry is used as an anti oil agent. Canned food, for the food industry in fruit juices, dairy products, soy milk and other quality improvement agent, water retention agent. Mainly for canned ham tender, broad beans in the skin softening, it can also be used as a thickening agent and softener.

Chemical name: Food grade Potassium Sulphate Molecular formula: K2SO4 Molecular weight: 174.26 CAS NO: 7778-80-5 Character: It is colorless or white crystalline powder. It has bitter taste. Relative density is 2.662. Melting point is 1069�°C. Easily soluble in water, insoluble in ethanol and acetone, pH is 5.5-8.5 in 5% aqueous solution. Packaging: It is packed with polythene bag as the inner layer, and a compound plastic woven bag as the outer layer. The net weight of each bag is 25kg. Storage and Transport: It should be stored in a dry and ventilative warehouse; kept away form water and moisture during transport; unloaded with care, so as to avoid damage to bags. Furthermore, it should be stored separately from poisonous substances.

330ml Organic Coconut Water no Sugar No preservative ( EU Organic Certification) Certification BRC , EU ORGANIC , FDA , FSSC22000 , GMP , HACCP , HALAL , USDA ORGANIC Manufactured by NAM VIET Foods & Beverage JSC Minimum Order Quantity 300 cartons Packaging Can (Tinned) Shelf Life 24 Months Primary Ingredient Fresh Coconut water Storage instructions Keep in a cool, dry place Supply ability 600 Twenty-Foot Containers per month Volume 330ml Looking for a refreshing and healthy drink to quench your thirst and revitalize your body? Look no further than our delicious organic coconut water. Packed with natural electrolytes and essential nutrients, our coconut water is the perfect way to stay hydrated and nourished throughout the day. Unlike other sports drinks and sugary beverages that are loaded with artificial flavors and preservatives, our organic coconut water is pure and natural, with no added sugars or artificial ingredients. It's the perfect way to fuel your body with the nutrients it needs to stay healthy and energized. One of the greatest benefits of our organic coconut water is its ability to support your body's natural hydration process. With a perfect balance of electrolytes, including potassium, magnesium, and calcium, our coconut water is a great way to replenish your body's fluids and stay hydrated, even during the toughest workouts and hottest days

Chemical Name: Monocalcium Phosphate Molecular Formula: Ca (H2PO4) 2, Ca (H2PO4) 2�·H2O Molecular Weight: anhydrous: 234.05; Monohydrate: 252.07 CAS: anhydrous: 7758-23-8; Monohydrate: 10031-30-8 Character: It is white crystalline powder or flaky crystal. Specific gravity is2.220. When heated to 100â??, it begins to lose crystal water. It is soluble in hydrochloric acid and nitric acid ,slightly soluble in water(1.8﹪). Uses: In the food industry, Monocalcium Phosphate serves as a raising agent for chemically leavened baked goods, baking powders,prepared cake mixes, self-rising flour, pancake mixes and more. It can also be used as an acidulant and buffer in dry beverage mixes. Packing: It is packed with polyethylene bag as inner layer, and a compound paper-plastic woven bag as the outer layer. The net weight of each bag is 25kg. Storage & Transportation: It should be stored in a dry and ventilating warehouse; be cautious to keep away from moisture and hot; unloaded with care, so as to avoid the damage. Furthermore, it should be stored separately from poisonous substances

Caustic soda or Caustic Soda Prill or Caustic Soda Flakes is also known as sodium hydroxide(NaOH) and Lye. This name is given because of the corrosive nature of the salt on plant tissues and animals. It is a versatile alkali. It is an extremely alkali and caustic base that deteriorates proteins at ordinary ambient temperatures and also causes serious chemical burns. Sodium hydroxide is a white solid ionic compound comprise of hydroxide anions OH- and sodium cations Na+. Application & Usage: In the Paper Industry, caustic soda is normally in the form of lye to separate the lignin that ties the fibers in the chemical pulping process. It is also used for paper recycling operations. In the refining of edible oil, sodium hydroxide is utilized as a neutralizer to remove free fatty acids that can give the oil an annoying taste. In the Petroleum Processing refineries, caustic soda is used for an alkalinity source in the liquid scrubbing of Sulphur dioxide in flue gases manufacture from crude-oil-fired steam generators used in thermally enhanced oil recovery. It allows the SO2 scrubber to run at a lower pH with a higher SO2 removal proportion. This process is called desulfurization. In the mining and refining, the alumina is manufactured from bauxite, it is an ore that is extracted from topsoil in different tropical and subtropical regions using The Bayer he Bayer. To extract alumina, bauxite is crushed, washed, and dried. After that, it will be dissolved with sodium hydroxide at very high temperatures. Alumina is extracted in the form of sodium aluminate. To produce aluminum it required multiple processes to get that. In the water treatment process, Caustic soda is very helpful in the pH neutralizing and adjustment of water streams. It is also used to raise the pH of water supplies. In different industries, sodium hydroxide is often used as a cleaning agent. Especially for sterilization and cleaning of bottles in the beverage industry. In chemical processing, caustic soda(NaOH) is used for delivering sodium to its final form and reactive agent in the production process and for many various purposes. It is also used to produce silicates and meta-silicates, bleach, fibers, also in food processing.

-Egg White Powder -Whole Egg Powder -Egg Yolk Powder About Egg white powder Egg white powder is made of pure egg white. It has the characteristics of desugarization, deodorization and quick dissolution. At the same time, it has good features, such as gel , foam ability, water retention. Thus it is widely used in many industries such as meat, surimi product products, bakery products, flour products and candy products etc. In addition, it is also widely used in textile, industries etc. The Function of Egg White Powder Egg White Powder is the high-quality food with balanced nutrition and the good food additive. It has the properties of emulsification, gelatination, foamability and water retention etc. It is applicable to all food products involved eggs as raw material, such as the pastry, biscuit, chicken essence, instant noodle, ice cream, salad sauce, noodle, drinks and pet food etc. Applications Of Egg White Powder 1. Egg White Powder can add into cakes, biscuits, and bread then improve nutritional value of the products, and increase the volume and softness, improve food flavor. 2. Egg White Powder after mixing with the dough, it can make the dough has higher ability of gas containing. 3. Egg White Powder add into the baked goods, and make the food surface colorful and beautiful. 4. Egg White Powder as a kind of natural emulsifier for the cold food, it can increase the cohesiveness of fat, and improve the conformity of the cold food. 5. Egg White Powder can as the ingredients of flavoring. Egg White Powder Egg powder is made by selecting, washing, disinfecting, spraying, drying, beating, separating, filtering, homogenizing, pasteurizing, spray drying, and sieving fresh eggs from the company's dedicated green chicken farm.

(1). Potassium hydroxide is widely used in the production of potassium carbonate including KHCO3, potassium soaps,detergents, fine cosmetic, potassium hydrogen phosphate, potassium permanganate, medical intermediate, liquid fertilizers, synthetic rubber, ABS resin, natural rubber emulsion, paper agent, fermentation, cresol, de-sulfuration in petroleum refining, bio-fuel and alkaline battery. (2). Potassium hydroxide can be used as a desiccant, sorbent, used for preparing potassium soap, oxalic acid and various salt, also used in electroplating, carving and so on. (3). Potassium hydroxide can be used for the production of potassium soap,alkaline battery, cosmetics in light industry (such as cream, cream and shampoo). (4). In the dye industry, Potassium hydroxide can be used for the production of vat dyes, such as vat blue RSN, etc.. (5). In the electrochemical industry, Potassium hydroxide can be used for electroplating, engraving, etc.. (6). In the textile industry, Potassium hydroxide can be used for printing and dyeing, bleaching and mercerizing, and used as the main raw material for synthetic fiber, polyester fiber manufacturing. (7). In addition, it is also used in metallurgical heating agent and leather fat, etc.. (8). Potassium hydroxide can be used as analytical reagent, reagent, carbon dioxide and water absorbent, and also used in pharmaceutical industry; (9). Potassium hydroxide can be used as the PH value of acid and alkali neutralization solution. (10). Potassium hydroxide can be used as the basic chemical reagent, carbon dioxide absorbent. saponification agents.

ProductASME 165 plate flanges BrandRenaissance Pipe Fitting Inc SizesRefer the specification ConditionNew Rating47 based on 52 reviews priceStart from 20 USD RFP India is a wellknown manufacturer and supplier of Plate Flanges in the steel market industry worldwide Plate flanges are most commonly used in fuel and water pipelines where two flange plates are locked up together with a gasket in the central point of them The flange plate will now have bolt holes all in the region of outer limits and will be used to make joints tees and junctions Meanwhile there are several benefits of Plate Flanges such as it is free from any shortcomings has an unmitigated service life has finer grain establishment as measured up to forged or cast items reduction of the customary maintenance expenditures and so on RANGE 15 NB to 60 1500NB in 150 LBS 300 LBS 600 LBS 900 LBS 1500 LBS 2500 LBS ASA 150 ASA 300 PN 6101625 4064100160 ETC available with NACE MR 0175 SIZE 15NB to 60 1500NB CLASS PRESSURE Class Pressure 150 300 600 900 1500 2500 PN6 PN10 PN16 PN25 PN40 PN64 DIMENSION B165 BS4504 EN1092 B1636 B1647 B1648 MSS SP44 STD STD ANSI Flanges ASME Flanges DIN Flanges EN Flanges BS Flanges API JIS NACE etc FEATURES Dimensional accuracy Corrosion resistance High efficiency Excellent finish Durable Stainless Steel Plate Flanges Standard  ASTM ASME ASA 182 Grade  F 304 304L 304H 309S 309H 310S 310H 316 316TI 316H 316L 316LN 317 317L 321 321H 347 347H 904L Duplex Steel Plate Flanges Standard  ASTM ASME ASA 182 Grade  F 44 F 45 F51 F 53 F 55 F 60 F 61 Aluminium Plate Flanges Standard  ASTM B247 B361 Grade  2024 6061 6063 6101 7075 Titanium Plate Flanges Standard  ASTM B381 Grade  Grade 1 Grade 2 Grade 4 Grade 5 Grade 6 Grade 7 Grade 9 Grade 19 Grade 23 Carbon Steel Plate Flanges Standard  ASTM A 105A694 A350 LF3A350 LF2 Grade  F42465256606570 Low Temperature Carbon Steel Plate Flanges Standard  ASTM A 350 LF2 A350 LF3 Alloy Steel Plate Flanges Standard  ASTM A182 Grade  F1F5F9F11F22F91 Copper Alloy Plate Flanges Standard  ASTM ASME SB 61 62 151 152 Grade  UNS NO C 70600 CU NI 9010 C 71500 CU NI 7030 C 71640 Nickel Alloy Plate Flanges Standard  ASTM ASME SB 564 160 472 Nickel 200 UNS N02200    Nickel 201 UNS N02201    Monel 400 UNS N04400 Monel K500 UNS N05500    Inconel K600 UNS N06600    Inconel 601 UNS N06601 Inconel 625 UNS N06625    Inconel 800 UNS N08800    Inconel 800H UNS N08810 Inconel 825 UNS N08825    Hastelloy C276 UNS N10276    Alloy 20 UNS N08020 Test Certificate Manufacturer Test Certificate as per EN 10204 31 nbsp Types Of Plate Flanges SS 310 310S Plate Flanges Duplex Steel UNS S31803 Plate Flanges Stainless Steel 304 304L Plate Flanges Duplex Steel Plate Flanges Stainless Steel 316 316L Plate Flanges Duplex Steel UNS S32205 Plate Flanges Stailess Steel 321 321H Plate Flanges Super Duplex UNS S32750 Plate Flanges Monel 400 Plate F

Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.

Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.

D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.