There are two kinds of E-O modulations. One is longitudinal E-O modulation if the directions of electric field and light propagation are the same. The KDP isomorphic crystals are normally used in this scheme. If the directions of electric field and light propagation are perpendicular, it is called transverse E-O modulation. The LiNbO3, MgO:LiNbO3, BBO and KTP crystals are usually employed in this scheme. Our Capabilities: Dimension Tolerance: (Wí+0.1mm) x (Hí+0.1mm) x (L+0.1/-0.1mm) (L1 for 1064nm,TEM00, 10ns, 10HZ (polished only); >0.5 for 1064nm,TEM00, 10ns, 10HZ(AR-coated) ; >0.3 for 532nm,TEM00, 10ns, 10HZ(AR-coatd). Quality Warranty Period: one year under proper use.
A Pockels cell alters the polarization state of light passing through it when an applied voltage induces birefringence changes in an electro-optic crystal such as DKDP (KD*P) and BBO. When used in conjunction with polarizers, these cells can function as optical switches, or laser Q-switches. Frequently, Q-switches are employed in laser cavities for the purpose of shortening the output pulse, resulting in a light beam with enhanced peak intensity. In order to provide the device best suited to your purpose, we offer the DKDP (KD*P) series and LiNbO3 series Pockels cell. You can operate the cell with either a pull-up voltage or a pulldown voltage. Changing the polarity will only change the direction of the phase rotation. In other words, the pull-down voltage Q-switch use ª-/4-voltage pulses on the Pockels cell and the pull-up voltage Q-switch use ª-/2-voltage pulses on the Pockels cell. You should not, however, operate the cell with a constant applied voltage potential between the terminals, or a duty cycle greater than ~ 2%. Applications: OEM laser systems Medical/cosmetic lasers Versatile R&D laser platforms Military & aerospace laser systems Product Feature: 1). Industry-proven performance; 2). Dry; 3). Highest (99.8% KD*P) deuteration levels in industry; 4). Adhesive/Epoxy-free assembly; 5). Apertures from 8mm diameter up to 20mm diameter; 6). Lowest absorption in industry; 7). High-reliability; 8). Economical upgrade/rebuild program; 9). Highest optical damage thresholds; 10). Accessible technical support; 11). Standard performance documentation; 12). One-year limited warranty. 13). Operation up to 1kHz. Specification/Models: D-EO-Q-25.4-39-X-C Outline Dimension: ª¦25.4x39mm Aperture: ª¦10mm Single pass optical transmission:>98% Voltage (V ª-/4) @1064nm: 3.2KV Extinction Ratio: >1000:1 Single Pass Insertion Loss:2000:1 VCR: >1500:1 Transmitted Wave Front Distortion: ª- /10 Capacitance: 3pF Spectral Range of Operation:240-1400nm Damage Threshold: >1GW/cm2
Fujikura fsm-60s fusion splicer is a updation of fujikura fsm-50s fusion splicer, 60s machine sets the standard for core alignment fusion splicing by incorporating a user-friendly interface with enhanced features to provide the most rugged and reliable fusion splicer in the market today. The new rugged construction adds improved reliability by resisting shock, dust, and rain, and can withstand a 30" drop test. The fsm-60s splices a optical fibre in 9 seconds and heats a 60mm splice sleeve (heat shrinkable tube)in 30 seconds, for a total cycle time of only 39 seconds. New features, such as automatic tube heater operation, user-selectable clamping method (sheath clamp or fibre holder system), automated monitor tuolima image orientation, and battery charge capability during splicer operation provide the end user a productivity tool they can count on. Description: Fujikura fusion splicer, 4.1" color screen, standard accessories, including cleaver ct-30a. Multiple foreign languages menu is optional. Features: >>> core to core fiber alignment system pas environment (rain, dust, shock) resistant features >>> world's most compact and lightest of its class >>> arc calibration-free system >>> 4.1" tft color lcd monitor >>> dual-directional operating system >>> long life battery >>> fiber holder option >>> detachable work plate (attached to carrying case) Standard original fujikura packing
Fusion splicer of fitel S199M4, fitel S175V2000
Otdr of agilent e6000b, anritsu mw9076b, in stock.
Modelú¦ electron eyepiece-a006 Detailed parametersú¦ Resolution: 1280(h)*1024(v) (1.30mp), or 2048(h)*1536(v)(3.00mp); Chip: 1/2" micron mt9m001; Magnification of optical system: 0.45x; Capturing micro-images and showing live video on pc screen; Saving still images as bmp, jpg files; Software for previewing, measuring, comparing, counting, saving and deleting; Tube mounts: ª¦23.2, ª¦30, ª¦30.5mmú+ Pc system required: Hardware: usb2.0 socket; cpu: intel p4; ems memory: 256m; hard plate: 512m; Software: win2000( with mend sp4); or winxp (with mend sp3); vista; directx 9.0
Modelú¦ LBH-2002DN Detailed parametersú¦ 45mm DIN Achromatic Objective: 4X,10X,40X(S),100X(S,Oil); Wide Field Plane-Scope Eyepiece: WF10X,Wf16X; Articulated Free Binocular Head, Interpupillary Distance:55-75mm, 30¿¼Inclined, 360¿¼Rotatable Built-in Digital Camera System, Resolution:1280(H) *1024(V),1/2Chip, USB2.0 with Micro-image Process Software Nosepiece: Backward Quadruple Nosepiece Double Layers Mechanical Stage:140X155mm,Moving Range X-Y: 70X50mm ¿¬2-¿¬30mm Iris Diaphragm And ¿¬32 Filter with ABBE Condenser:N.A. 1.25 Coaxial Coarse And Fine Focusing Adjustable Mechansim: 30mm, Precision:0.002mm Built-in Adjustable Brightness Halogen Lamp 6V/20W and Kohlar Illumination System
Modelú¦ lw91-06e-1 Detailed parametersú¦ 45mm din achromatic objectiveú¦4x, 10x, 40x(s), 100x(s, oil) Wide field plane-scope eyepieceú¦wf10xú+ Total magnificationú¦40x-1000x Monocular headú¼45¿¼ inclinedú¼360¿¼ rotatable Double layers mechanical stageú¦110x125mm, moving range x-yú¦60x20mm ¿¬2-¿¬30mm iris diaphragm and ¿¬32 filterú+ Abbe condenserú¦n.A. 1.25 Coaxial coarse and fine focusing adjustable mechanismú¦14mm Built-in incandescent lamp 20wú¿or halogen, or fluorescent, or ledú¬ Net weight/setú¦2.6kgú+ Packageú¦4 sets/carton54x39x40cmú+ Gross weight/cartonú¦13kg
Model lgx-2006b Detailed parameters 45mm din achromatic objective10x 100x (s, oil) Metallurgical plan-scope achromatic objective40x Wide field plane-scope eyepiecewf10xú¼wf12.5x Wide field plane-scope eyepiece with 0.1mm cross micrometerwf10x micro-ruler0.01mm/scale Total magnification100x-1250x Articulated free binocular headú¼interpupillary distance55-75mm 45 inclined double layers mechanical stageú¿200x180mm with two plates 10 and 20mm Moving range x-y70x50mm Coaxial coarse and fine focusing adjustable mechanism by rack and pinion with tension adjustment and stage height limited knobú+ Focusing range25mmú+ Precision0.002mm Built-in adjustable brightness halogen lamp 6v/20w and kohlar illumination system with blueú¼greenú¼yellow and ground glass filters Net weight/set 8kg Package1 set/carton 42x35x52cmú+ Gross weight/carton 10.5kg.
Modelú¦ LSZ-6CP Detailed parameters Objective Grouped From Any Three Objectives of 1X, 2X, 3X and 4X Working Distance 1X-55mm 2X-81mm 3X-61mm 4X-57mm Wide Field Plane-Scope Eyepiece WF10X WF15X Optional Articulated Free Binocular Headú¼Interpupillary Distanceú¦55-75mmú¼45¿¼ Inclinedú+ Illuminationú¦Top/ Bottom Lightú¦12V/10W Halogen Lampú¼ with ¿¬95mm Frosted Glass Stage Plate Rack and Pinion Coarse Focusing Mechanism With Slip Clutch and Tension Adjustment Net Weight/Set 2.4kg Packageú¦4 Sets/Carton61X35X36cm Gross Weight/Cartonú¦11kg
Dental microscope 3 step magnification. Technical specifications Microscope section 45degree inclined binocular tubes 12.5x w.F.Eye pieces 3 step magnification ( 7.5x, 12.5x & 20x) Objective : f= 200mm Working distance : 200mm Interpupillary distance Adjustment: 55mm to 75mm Motorized foot focusing system Illumination section Type : by optical light guide system Light source : 24V/250W halogen lamp Illumination control : continuous adjustment Field of illumination : 70mm Filter : cobalt blue, red-free, Heat absorbing filter Stand section Type : floor stand Vertical range of Counter balanced arm: 400mm General information Base size : 600mm x 550mm Weight : 50kg approx. Height : 1550mm Electrical power : AC 220V/110V Optional accessories:- 1. Beam Splitter with Camera Mount 2. CCD Camera. Weight 50 kg. Approx.
Operating microscope with 3 & 5 step magnification Operating microscope, available for ophthalmology, ent procedures, dental procedures, neuro surgeries, plastic & general surgeries. 45degree inclined binocular tubes for ophthalmic, dental, neuro & plastic surgery 90degree straight binocular tube for ent surgery Available with 3 step magnification i.E. 7.5x, 12.5x & 20x Field of view: 37.8mm, 23.5mm, 14.5mm And 5 step magnification i.E. 5x, 7.5x, 12.5x, 20x, 30x Field of view: 59 mm, 37.8mm, 23.5mm, 14.5mm, 9.5mm Eye pieces:12.5x extra wide field / 16mm dioptric adjustment Objective lens:f=200 Working distance:200mm Interpupillary distance adjustment:55mm to 75mm Motorized foot focusing system Illumination section: Light source:15v/150w halogen lamp Illumination control:continuous adjustment Field of illumination:70mm Filter: cobalt blue, red-free, heat absorbing filter General information Base size:600mm x 550mm Weight:50kg approx. Height:1550mm Electrical power:ac 220/110v Optional accessories: 1. Beam splitter with c' mount 2. Monocular assistscope 3. Ccd camera 4. Objective lens 300mm or 400mm. Weight 50 kg. Approx.
A water-cooled acousto-optic Q-Switch for use in high-power Nd:YAG laser systems. Combining top grade fused silica with high quality optical finishing and in-house anti-reflection coatings, this Q-Switch exhibits very low insertion loss and high damage threshold. Through an innovative design and manufacturing process, RF powers up to 100W may be applied. Standard options include a choice of frequencies (24 to 68MHz), active apertures (1 to 8mm), acoustic modes (compressional for linear polarisation, shear for unpolarised) and water connectors. Customised housings are available for OEMÆs.
A high power RF driver module is available in output powers of 50W, 75W or 100W. Powered from 220VAC or 110VAC, the modulation inputs allow either full digital control or activation of an internal pulse generator. First pulse suppression is automatically implemented.
Material BK7. Diameter tolerance -0.1mm . Thickness tolerance 0.1mm . Aperture >90%. Flatness l/4-l. Dig/scratch 60-40 .
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a profile projector, which is to project the magnified image of the component with the help of optics, sipconÆs profile projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like roundness, parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling softwares.
Coordinate measuring machine versatile, portable & low cost CMM for engineering institutes from SIPCON provides all the functionalities with a user friendly software from Metronics, USA is available in both manual & CNC system.
Profile projectors have become an indispensable need of automobile, engineering goods, electrical, plastic & rubber industry because of the increasing demand for critical measurements with precision, accuracy & repeatability. Apart from the basic function of a Profile Projector, which is to project the magnified image of the component with the help of optics, SIPCONÆs Profile Projector comes with various options of D.R.O.S & software to measure geometrical dimensions (like Roundness, Parallelism etc.) & to perform all kind of reverse engineering operations, thanks to its compatibility with a large number of drawing & modeling software.
For engineering institutes from SIPCON, provides all the functionalities with a user friendly software from Metronics, USA and is available in both manual & CNC system.
Waveplates (retardation plates or phase shifters) are made from materials which exhibit birefringence, we usually use quartz or quartz+bk7. There are several kinds of waveplates, multi-order waveplate, zero order waveplate, true zero order waveplate and dual wavelength waveplate. Our standard size is dia10mm, 12.7mm, 15mm, 20mm, 25.4mm and 30mm. Of course, other size and coating are available upon request. 1mm
