(1)Introduction and Application The oil modulated by this product has excellent performance of the high temperature cleanness, low temperature dispersity, antioxidation and antiwear. On the paraffin base oil of Daqing, the oil of grade 10W/30?10W/40 and 15W/40 can be modulated by adding amount of 4.4 or 5.4% of this product can meet the quality requirement of grade API SE/SF. This product is suitable for engine oil for advanced electric motorcycle of 4-Stroke. (2)Dosage Reference Quality Level Additive Dose (m %) SE 4.4 SF 5.4 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/m3 900-1200 GB/T1884 Kinematic Viscosity (100°C), mm2/s Report GB/T265 Ca, %(m/m) 2.50-3.50 SH/T0297 N, %(m/m) 0.50-0.70 SH/T0224 Zn, %(m/m) 1.60-2.00 SH/T0226 TBN, mg KOH/g90.0 GB/T0251 Flash Point (Open), °C170 GB/T3536 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet.. (5)Packing Net Weight: 180Kg/Iron Drum.
(1)Introduction and Application This product is an additive package for the modulation of high grade oil. Engine Oil modulated by this product has an excellent cleanness, dispersity and antioxidation anticorrosion antiwear capacity. It can significantly reduce the deposition of carbon and film of the engine piston, and prolong the oil exchange cycle of the engine. Test data to meet the performance requirements of grade API CI-4/SL in class II/III base oil. The test was carried out in according to the rules of the API base oil exchange. (2)Dosage Reference Quality Level Base Oil Type Viscosity Grade Additive Dose (m %) CI-4/SL A 15W40/10W40/10W30 13.0 CH-4/SL API 15W40/10W40/10W30 11.5 CH-4/SJ API 15W40/10W40/10W30 11.5 CF-4/SL API 15W40/10W40/10W30 7.5 CF-4/SJ API 15W40/10W40/10W30 6.0 (3)Quality Index Item Quality Index Test Method Density (20°C), kg/ m3 Report GB/T1884 Flash Point (Open),°C170 GB/T3536 Kinematic Viscosity (100°C), mm2/s100.0 GB/T265 TBN, mg KOH/g70.0 SH/T0251 P , % (m/m0.70 SH/T0296 N , % (m/m0.50 SH/T0224 Zn, % (m/m0.90 SH/T0226 Ca, % (m/m2.30 GB/T0297 (4)Storage According to the requirements of SH/T0164, the maximum temperature should not exceed 75°C for the storage, handling and blending of the product, and it should not exceed 45°C for long-term storage. For more details of health and safety precautions, please refer to Material Safety Data Sheet. (5)Packing Net Weight: 190 Kg/Iron Drum
We are well-known in lubricant additive industry supplying qualified viscosity index improver with hundred tons manufactured & exported monthly. Our main markets are usa, south america, middle east (uae, saudi arabia…), africa ( nigeria, south africa, …), europe ( ukraine, spain, german, …), asia (china, india, singapore, …) and australia. We have many vii codes with ssi differences according to customer’s demand. They are amorphous epm grade, low crystalline and very good for viscosity improvement, professionally tested under international testing standard astm d 1646, astm d 3900, astm 6022 and astm d 1416 Viscosity index improver is manufactured upon the world high-class innovative technology. Which take leading the 25 kgs/bag
Worldpetrochem is one of leader VII pellet form and bale form, SPO, KENTAL.. Are you looking for best oil sources or best lubricant additives which can improve high viscosity index & low pour point ? With hundred years of experiences in Oils & Lubricants, World Petrochem FZE is well known as one of the biggest suppliers with main office based in UAE and representative offices in USA, South America, Europe, South Africa and Australia. Especially we are the largest supplier of Viscosity Index Improver Polymers branded as Esprene SPO, Lanxess, Keltan, Buna. Flexible payment terms drive you be safe with us. Long term relationship is what we are heading up. 25KG/BAG
Characters of Molybdenum Disulfide: Adopt the world-class microwave purification and vacuum drying technology. 1. Purity: 99.9% max 2. Oil: lowest to 0.05% 3. Moisture Content: lowest to 0.05% 4. Friction Coefficient: 0.05-0.09 Application: As good solid lubricating material, High-Purity MoS2 is used as lubricant additives in grease and oil, also can be used in the field of plastic, rubber, nylon,PTFE, coating and so on. 25KG/drum, fiber drum.
Lubricant additive: detergent, ashless dispersant, zddp, ep, oiliness additive, antixidant, anti-rust additive, pour point depressant, antifoam agent, demulsifying additive.
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.
Description RD3190 has been developed to formulate high quality automotive engine oils and multigrade oils. The following performance levels can be achieved with oils formulated with RD3190. The Recommend Dosage Performance Level Dosage wt% SN/CF 12.6 SL/CF 12.3 Characteristics Item Typical Value Test Method Flash point (COC) 180min GB/T3536 Kinematic Viscosity (100),mm2/s Report GB/T265 TBN, mg KOH/g 80 SH/T0251 Calcium, m% 2.45 SH/T0270 Zinc, m% 0.86 SH/T0226 Phosphorus, m% 0.78 SH/T0296 Nitrogen, m% 0.78 SH/T0224 Sulfur, m% 2.54 SH/T0303 Molybdenum, m% 0.03 Spectrophotometry The product is packed in 200 liter metal drum (net weight:200 kg/drum).
Our Product Item: Soy Feed Additive - Peptide Powder Enzymes Origin: Taiwan Colour: Yellow Smell: - Packing: 25/50Kg Pp Monthly Supply: 1,000mt
It shows excellent performance in the bench test. Meet the requirement of SH0564-93. Good cooling speed and brighten metal surface. Ideal characteristic temperature and characteristic time can be achieved Be used to formulate the common quench oil, quick bright quench Oil, quick Quench Oil. Over-speed quench oil can be formulated by adding a special cooling accelerant.
Ninesen3210 is a functional additive package developed for CD/SF universal engine oil. It is suitable for blending universal engine oil below CF/SF grade. Extend the service life of engine; Excellent acid neutralization performance; Excellent biodegradability; Excellent performance in API I, II grade base oil; Effectively inhibit wear; Outstanding value for money, easy to use.
LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE are high performance greases, formulated with lithium based thickeners fortified with Molybdenum Disulfide (MoS2) solid lubrication, high quality base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 460 & 320. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy shock loads and extreme unit pressures are present. LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE greases are suitable for operating temperatures range from -20�°C to 130�°C, while LUBENZ XTREME LITHIUM â?? MOLY BASE GREASE suitable for operating temperatures range from -25�°C to 120�°C for more information, please contact us.
LUBENZ ULTRA NANO LITHIUM COMPLEX GREASE are high performance greases, formulated with lithium complex based thickeners, high viscosity index base oils and extreme pressure additive system to provide excellent protection against wear, rusting and water washout. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 220. They are suitable for most types of Automotive and Industrial applications, including heavy-duty Marine applications where high temperatures, heavy loads and extreme unit pressures are present. EP 1, 2, 3 & 2 Moly greases are suitable for operating temperatures range from -20�°C to 140�°C, while EP 00 & 0 greases are suitable for operating temperatures ranging from -25�°C to 130�°C. for more information, please contact us.
LUBENZ PIONER GREASE CALCIUM BASE-EP series are high performance greases, formulated with Calcium based thickeners and an ISO VG 320 mineral base stock to provide added protection against wear, rusting and water washout. They are available in NLGI grades 2 & 3, which are suitable for general purpose automotive applications at moderate temperatures and loads. The suitable operating temperature range is from -20�°C to 80�°C maximum. It does not contain lead or any other heavy metals which are considered harmful to human health and environment. for more information, please contact us.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear, rusting and water washout especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability. for more information, please contact us.
LUBENZ FLUX BRAKE FLUID 4 DOT 4 are supreme performance hydraulic brake fluid based on polyethylene glycol ether technology to provide a high level of brake and clutch performance in automotive and commercial vehicles. They are designed to meet or exceed the general requirements of most builders of automotive disc, drum and anti-skid brake systems and clutch systems, used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. for more information, please contact us.
X ENGINE OILS (SAE 10W-30/10W-40/10W-60/15W-40/20W-40/20W-50/20W-60 API SN/CF, SM/CF, SL/CF, SG/CF, SG/CD) ( mineral based) LUBENZ PREMIUM PLUS PEO series are designed with high quality base stocks and advanced technology additive system to provide high level of protection and performance. It works harder than other conventional motor oils by continuously preventing dirt and sludge build-up and reduces engine noise. This product meets the requirements of most car manufacturers and is suitable for use in both gasoline and diesel, naturally aspirated or turbo charged engines, operating in all round seasons and adapted to vehicles equipped with catalytic converters running on unleaded fuels. for more information, please contact us.
