Snt 1100 single phase meter test bench is widely used in power utilities,¡émeter manufacturer,¡émeasurement/quality test lab and other enterprises to test single phase energy meter.
Measure normal parameter of power line: Vrms, irms, frequency Active power, reactive power, apparent power Phase angle between voltage and current Power factor Calibrate single phase meter; Measure harmonic of voltage and current; Measure waveform of voltage and current; Measure current transformer¡¡¥s ratio (option); Energy accumulation test; Built-in clock, record testing time exactly; Store, check and transmit the measured data; Connected to pc, reading recorded data and real-time measured data by pc; Alarm when the tested voltage and current over the testing range; Connected to portable printer (option).
Standard configuration Sight window*1, cable port(port diameter: 50mm)*1, shelves*2, chamber lamp*1, power cable *2m No fuse breaker, over pressure¡¢over heat and over current protection for compressor, Over temperature protection, over load protect of blower, dry heat protection A glass door can be provided behind the main door so that specimens can be observed. Two operation ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door. Dehumidifier The rotation regenerating dehumidifier m-120 ensures precise control of low humidity (5¨¬c 5%rh) for electrostatic reliability tests. Temperature and humidity recorder -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 2 pen Temperature 1 pen and humidity 1 pen. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 100mm and 6 dots Temperature 3 dots and humidity 1 dot. -100 to +150¨¬c/0 to 100%rh 100mm with effective width 180mm and 12 dots Temperature 6 dots and humidity 6 dots.
Features: 1. Check the error of active and reactive of watt-hour meter at the same time, and meanwhile check the error of main and secondary meter in the same circuit. 2. Display the electrical constants such as: voltage, current, power, power factor, phase and frequency and etc. 3. Measure ct ratio, wave form display. 4. Measure 2-51 voltage and current harmonics. 5. Judge wrong wiring. 6. Measure the baud rate for multi-function energy meter and meter number reading. ¦ct secondary loading function. 8. Automatically correct the clamp error.
A) Capacity: 24,000 MT And Growing B) Equipment 8-Blocker Straight line machine with PLC control 4-Blocker straight line machine with PLC control Hi speed 40-table annealing furnace-12 m long Inverted vertical wire drawn machine All machines are available with an online clearing and coating facility. PRODUCT SPECIFICATIONS WIRE SIZE RANGE : 1.8 - 8 mm PHYSICAL ATTRIBUTES : Coil ID 300 - 700 mm Coil Weight - 25 - 850 kg FINISH : Bright material TOLERANCE : H9, H10, H11 SUPPLY CONDITION : Soft annealed ¼ hard ½ hard Spring hard Tensile standard / As per customer requirement GRADES : AISI: 201, 202, 204Cu, 301, 302, 303, 304, 304Cu, 304HC, 304L, 304H, 310, 310S, 312, 314, 316, d16L, 316LN, 316Ti, 316LCu, 321, 410, 420, 430, 430L, 904L DIN/EN: 1.4301, 1.4306, 1.4307, 1.4310, 1.4401, 1.4404, 1.4567, 1.4841, 1.4842, 1.4541, 1.4845, 1.4570, 1.4571, 1.4578, 1.4597, 1.4362, 1.4370 and 1.4016 Electrode Grades: ER304, ER304L, ER307, ER307SI, ER308, ER308L, ER308LSi, ER310, ER316, ER316L, ER316LSi, ER347, ER347SI, ER309L, ER430 and ER420 *Specialised grades also available as per customer requirements
Product profile: 1) It is mainly used for tensile testing of various types of steel wire ropes, bolts, slings, anchor chains, rigging, shackles and other test samples. 2) Horizontal frame with frame structure and single-acting double-acting servo cylinder. 3)High-precision tension-loading load cell force measurement, photoelectric encoder measurement displacement. 4) Special bolting attachment for bolts (other fixtures can also be designed separately) for convenience and reliability. It can be selected according to different types and samples of different specifications. 5) Moving the beam can facilitate the adjustment of the test space. 6)The horizontal tensile testing machine adopts servo control technology and has closed-loop control loops such as test force and displacement, which can be loaded in stages. The microcomputer automatically collects data and performs data processing. The appearance of various different tonnage lyings from the factory:
Application Auto tensile tester applies to plastic films, sheets, rubber, laminated films, extrusion films, foils, paper, medical patches, release paper, non-woven fabrics etc testing of various items, such as tensile, break force, elastic modulus, elongation, seal strength, t-style peeling strength, 90 peeling strength, 180 peeling strength, widely used in food & pharmaceutical industries, quality inspection departments as well as research and development institutions.
SERVICES OFFERED Fish dosing and packaging line, delivery, installation, testing, adjustment, and commissioning according to the agreed solutions and volume. "NEROLI MET" GUARANTEE: CE marking for all equipment; the warranty period of the production equipment 12 (twelve) months from the moment of mutual signing of the final transfer-acceptance act. TECHNICAL DATA One set of new equipment for weighing and packing frozen fish. The frozen fish weighing dispenser is integrated in the fish feeding, sorting, 10 kg weighing and packing line. Designed for installation in the customer's premises, taking into account the dimensions and ceiling height. Multi-head dosing device MBP 14C2 EW 60.
Features : Soft flow,Wood flour filled Phenolic Moulding Powder with good surface & mechanical and electrical properties,suitable for Injection Moulding & Transfer Moulding. Colour : Black Applications : Appliances Properties Test Method Typical Value Appearance - Black Apparent Density ISO 60 0.65 g/cm3 Specific Gravity ISO 183 1.40 Tensile Strength ISO 527-1/2 52 MPa Flexural Strength ISO 178 85 MPa Compressive Strength ISO 604 200 MPa Charpy Impact Strength(notched) ISO 179 1.80 KJ/m2 Deflection Temperature , 8 Mpa ISO 75 1300 C Surface Resistivity IEC 60093 1.00E+10.5 Ohm Volume Resistivity IEC 60093 1.00E+11.5Ohm.cm Di Electric Strength IEC 60243 8.00 Kv/mm Proof Tracking Index IEC 60112 130 V Water Absorption ISO 62 55 mg Shelf Life - 6 months
UN Certified Bulk Bags (UN Fibc bag) is designed specifically to fulfill the requirements set forth by the United Nations for transporting and storing hazardous materials. The UN bags are designed and tested by the recommendation as laid down in the â??United Nations Recommendations on the Transportation of Dangerous Goods (Orange Book)â??. To maintain international regulations for transport by road, rail, and sea, Devratan Enterprises designs and produces quality UN Bags with the help of an efficient and trained staff along with the latest advanced technical equipment Devratan Enterprises bags comply with all the requirements mentioned by the UN FIBC. Various tests that are decided by the UN include Top lift test, Righting test, Tear test, Drop test, and Stacking test. The UN Bags are first tested at our testing laboratories and further repeating the same in an independent testing facility to get it certified officially. To be classified as such, the bags must undergo rigorous testing methods. Our sales experts are highly knowledgeable when it comes to these requirements. We can in-depth analysis of your current specs and determine which type of UN-approved bulk bags are the best solution for you There are four types of FIBCs for dangerous goods made from woven plastics: 13 H 1 â?? Woven plastics without coating and without liner. 13 H 2 â?? Woven plastics, coated and without liner. 13 H 3 â?? Woven plastics, uncoated and with liner. 13 H 4 â?? Woven plastics, coated and with liner. UN IDENTIFICATION AND LABELING FOR FIBCs UN Bulk Bags have a unique labeling system designed to allow the user to track the origin, manufacturer, coating, materials, and other important factors of the individual bag. See below for an explanation of the labeling system
Application: HV test shielding room (faraday cage) are Widely used in power cable, transformer, transformer switch, transformer substation and other High voltage levels of partial discharge test or impulse test. For HV testing shielding room, as a HV test place, it should has good electromagnetic shielding condition. And its electromagnetic compatibility always is of great importance. Firstly, it should restrict electromagnetic wave into inside shielding room caused by discharge when making HV test to weakening interfere to outside, especially on electronic and communication system. Secondly, it should prevent outer electromagnetic wave intruding into shielding room to cause measurement error of partial discharge and wireless. Thirdly, it should reduces open circuit voltage and closed current to restrain common-mode interference so that to avoid equipment damage and to improve accuracy of impulse measurement. For GIS HV test shielding room, design area is 500 m2ï¼?Length 25mã??Width 20m). From provided information , we find that steel structure have been completed already with one set of 20T crane indoor, crane supporting corbel also completed, the height is 17.9m from ground to upper part of corbel. Main door height 13m,width 10m, locates at downward of the west side, the door open direction towards to north . According to ILJIN drawing, three side of structure column has already, but western structure column still missing yet. however, as the main door will be located in this side, the western side also should have steel structure , and this structure position still should be unified considered with main door installation. We will be able to submit suggested design diagram with position & size of this structure column for reference. in order to save construction cost, the construction engineering will be carried out by ILJIN team.
Scratch Grinding Tester Automobile line inspection equipment Wire and Cable Detection Equipment It is applicable for assessing the scratch-resistant performance of automobile wire insulation with external forces in line with the requirements of GB/T12528-2008. Main parameters: 1. The scratch grinding device exercises in two directions along wire axes with a stroke above 10mm 2. Exercise frequency: 50~60 cycles/min 3. Minimum distance between test points and test point and test sample end: >10mm; rotation angle of test sample: 90° 4. Length of test sample: Test sample which is about 750mm is firmly fixed to a steel anvil 5. Weight: 400, 700, 1000g (weights applied to scratching needle) 6. Function: The device will stop when the scratching needle grinds through insulation and comes into contact with conductor
Resistance Test Instrument Supplier ZY9733 and ZY9734 digital desk type low current resistance measuring meters are suitable for units concerned to measure the DC resistance of various components and parts with certain limitations on current, such as platinum resistor, coppery thermal resistor, PTC ceramics, thermistor and various wire rods, etc. 1. Key features 1.1 It adopts a large green LED to display measured value, which is striking and clear. It also adopts the four-terminal resistance measurement method to eliminate the impact of conductor resistance, and the measurement accuracy is high. 1.2 There are a variety of specifications, and each specification has four scales to meet the measurement requirements of different users. 1.3 The test current is lower than similar equipment, which effectively prevents the impact of components and parts on resistance. 1.4 ZY9734 type has a RS-232 serial data output interface to facilitate the connection to computer. 1.5 It adopts a novel plastic shell and can changes the inclined angle between the device and table by adjusting the handle position, so as to determine the suitable panel observation angle. It has a well-designed appearance and is easy to use. 2. Main technical indicators Temperature: Reference conditions: 20±5; nominal condition: 5~35 Relative humidity: Reference conditions: 40~60%; nominal condition: 25%~75% Power source: AC 220V±10%, 50Hz, power consumption: About 5VA.
Sawdust Moisture Meter MS-W Sawdust moisture meter with seperate probe MS-W used for measuring moisture content of wood materials(such as sawdust,paillasse,bamboo powder and wood chips).It applicable of paper making , flakeboard , furniture and mechanism of charcoal industry. Features: * It is portable, compact, easy to use and the moisture measurement readings are instant. * Digital display with back light gives exact and clearly reading although you stay at the somber conditions. * The moisture meter operation has automatic temperature compensation. * Data hold function. * Low battery alert. Specifications: Digits LCD with backlight Measuring range :0-84% Operating conditions: Temperature:0-60 Humidity:
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters.
JH Digital Tension Meters Large, easy to read backlit, graphic display with adjustable backlighting and contrast. Display shows tension, name of calibration selected, running line minimum and maximum tension values, and battery charge level. Indicate length of material in feet or meters. Packaing:59*78*183mm
SCR Voltage Regulator
•Large and easy-to-read LCD •Data Hold Function •Waterproof and designed to float •Automatic Temperature Compensation •Replaceable probe