Iron Nickel Low Expansion Alloy Nilo 36 Suppliers and Manufacturers

Bauxite is a naturally occurring mineral comprising mainly of aluminium hydroxides (the trihydrate Gibbsite Al(OH)3and the AlOOH monohydrate polymorphs boehmite and diaspore), with other components in the mineral typically being silica, iron oxide, titania and aluminosilicates (clay etc). It’s a rock from Laterite soil and it is a primary Ore of Aluminium. Properties of Bauxite include low iron content; a high Polished Stone Value (PSV) for high friction surfacing applications; a high melting point and density. APPLICATIONS Gunning materials High friction surfacing Minerals for abrasion Refractory castables Mouldable and Ramming Mixes Refractory mineral blends CEMENTATION believes in supplying quality bauxite with consistency to its customers across the world, according to their needs.

The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects

ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature. ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning. MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc CATEGORY: ABS TYPE: Regrind SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt Origin: Bangladesh LOADING WEIGHT: 26 Ton FOB (USD/Ton): 750$ - 950$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

COCOPEAT LOW EC BLOCKS 5 KG : USD 300/MT (FOB) Specification : - Fiber : +/- 5% - Size : 5KG (Block 5KG) - Dryness Level : +/- 95% - Moisture : +/- < 5% - Expansion : 15 Litre/KG - EC : +/- < 0,5 - Packing : Wrapping full (30cm x 30 cm x 12/15 cm) - Load Abality : +/- 24 MT (20 pallet) or +/- 26 MT (without pallet) - Product Supply Ability : 10 contaniers 40"HC COCOPEAT HIGH EC BLOCKS 5 KG : USD 250/MT (FOB) Specification : - Fiber : +/- 10% - Size : 5KG (Block 5KG) - Dryness Level : +/- 70%-80% - Moisture : +/- > 20% - Expansion : 15 Litre/KG - EC : +/- < 1,0-1,2 - Packing : Wrapping full (30cm x 30 cm x 12/15 cm),Pallet optional - Load Abality : +/- 24 MT (20 pallet) or +/- 26 MT (without pallet) - Product Supply Ability : 10 contaniers 40"HC COCOPEAT HIGH EC BLOCK 150/200 KG : USD 212/MT (FOB) Specification : - Fiber : +/- 15%-20% - Size : 150/200KG ( Big Size 1 Block) - Dryness Level : +/- 60% - Moisture : +/- 40% - Expansion : 15 Litre/KG - EC : +/- < 1,0-1,2 - Packing : 1 Jumbo bag consists of 3 block + strapping straps. - Load Abality : +/- 24 MT (20 pallet) or +/- 26 MT (without pallet) - Product Supply Ability : 10 contaniers 40"HC

Our range of industrial flanges are ideal for application in diverse industry for high pressure and temperature applications. These flanges are designed with precision for easy installation. Apart from standard flanges, we also offer custom designed flanges to meet the specific application requirements of the customers. 1] Stainless & Duplex Steel Flanges 2] Carbon & Alloy Steel Flanges 3] Nickel & Copper Alloy Flanges 4] Hastelloy Flanges 5] Inconel Flanges 6] Incoloy Flanges 7] Monel Flanges 8] Aluminium Flanges 9] Titanium Flanges

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM

(LME standards) Standard Cu Cathode-1, purity 99, 97-99, 99 %Dimension: 914 mm x 914 mm x 12 mm (LME standards) Copper (Cu) min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S 4 PPM Iron Fe 2 PPM Silver(Argent 10 PPM Lead Pb 0.2 PPM Nickel Ni 0.2 PPM Selenium Se 0.3 PPM Antimony Sb 0.1 PPM Silica Si 0.3 PPM Cobalt Co 0.2 PPM Arsenic As 0.1 PPM Bismuth Bi 0.1 PPM Manganese Mn 0.1 PPM Tellurium Te 0.05 PPM Aluminum Al 0.5 PPM Magnesium Mg 0.4 PPM Zinc Zn 0.4 PPM

- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper

- Diastase: 8%ml/(g.h) - Moisture max 18% - Fructose min 40% - Sucrose max 5% - HMFmax: 20mg/kg Dextrose : 28 - 36% Sucrose : 0.8 - 5.0% Nitrogen : 0.05 - 0.38% Ash : 0.04 - 0.93% pH : 3.3 - 5.6 Enzymes : invertase, diatase, glucose oxidase Acid :Gluconic Acid Free Acid : 12 - 40 milliequivilants/kg Vitamins : B2, B6, C, H &K Minerals : Potassium, calcium, magnesium, sodium, iron chloride, silicon, silica, manganese, sulphur, phosphorus, zinc and copper

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

Features: MusclePharm Arnold Iron Mass Weight: 1.5lb (680g) Total package contents: 2 Flavour: Chocolate Malt Protein per serve: 20g Calories per serve: 243 Elite complex carbohydrates matrix for quicker recovery & muscle building Muscle plasma protein technology High performance healthy fats Performance growth & muscle volumiser Pro-digest blend aids with digestion Low in sugar

1. colors: filemot; 2. high energy, high content of protein; 3. rich in vitamins and potassium, sodium, magnesium, iron, copper, manganese, zinc and other trace elements; 4. strong attractant to animals: thick aroma, induce animals to eat; 5. high security: fresh raw materials, without corruption and modification, and several times of high temperature processing, which can kill harmful bacteria effectively; 6. high-absorbing rate: after entrance to the industry, the raw materials are sorting out of the skin, fur, hoof, horns, blood and other debris; 7. reducing the cost: low rice, good source of high-quality protein, and can replace part of fishmeal and soybean meal, can reduce feed costs, and can effectively improve the quality of the product. scope of application: fox, mink, badger-like animal, livestock, poultry, fish, pets and other animals.