SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Richeese Ramen Spicy Cheese are instant ramen seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Richeese Ramen Spicy Cheese are instant ramen seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Richeese Ramen Spicy Cheese are instant ramen seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Richeese Fried Cheese Noodles are instant noodles seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Richeese Fried Cheese Noodles are instant noodles seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Richeese Fried Cheese Noodles are instant noodles seasoned with powdered cheese which comes in spiciness level up to level 5. Start with level 0, 1, 2, 3, up to 5, all of them can provide a unique taste sensation. Soft and thick cheese seasoning with legit noodles give this product are really worth trying. Variant: - Ultimate Hot - Extra Hot - Cheese
Premium Ash Wood Logs and Lumber for Sale Logs: Species: White Ash (Fraxinus americana), European Ash (Fraxinus excelsior) Grade: Prime, Standard, Industrial Diameter: 10 inches to 40 inches Length: 8 feet to 16 feet Lumber: Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: 4/4, 5/4, 6/4, 8/4, 10/4, 12/4, 16/4 Width: 4 inches to 12 inches (random width) Length: 6 feet to 16 feet Characteristics: Beautiful light to medium brown heartwood with pale sapwood Straight grain with a coarse, uniform texture High flexibility and shock resistance Applications: Perfect for high-quality furniture, durable flooring, sports equipment, and millwork.
Kaempferia galangal L. (Zingiberaceae), also known as aromatic ginger, is used in food and cosmetics, pharmaceuticals, and maquillage materials, as well as in traditional Asian medicine. Our aromatic ginger is carefully selected, cleaned, and dried to preserve its unique flavor and aroma. It is an excellent spice that adds a warm, sweet, and slightly spicy flavor to any dish. Key Specifications/Special Features : 1. Cultivation Type: Conventional 2. Weight: above 35gr per pcs - Grade: AAA (High Quality) 3. Maturity: 70 to 95% 4. Color: reddish-white. 5. Taste: this has a sharp, strong aroma and a hot, clean taste. 6. Seasonality: All year-round supply 7. Moisture: Max 12% 8. Drying Process: Oven Drying 9. Capacity: 250 MT / monthly 10. Shelf life: 1 year 11. Place of Origin: Indonesia
Frankincense Hydrosol 5 Liter Frankincense Hydrosol, the benefits and uses Frankincense Hydrosol is produced through the steam or hydro distillation process of the Boswellia Carteri resin. Hydrosols are also known as herbal distillates, essential waters, hydrolats and herbal waters. This results in a hydrosol with a superior aroma and great properties yielding the much-needed benefits of the resin, in a gentler way than the pure essential oil. Frankincense Hydrosol is a beautiful skin-healer that boasts anti-inflammatory, antibacterial and analgesic properties, and an added ability to tone and improve skin texture. As Hydrosols are safer and gentler than pure Essential Oils, it is a great choice for people with sensitive systems, including children, the elderly and even pets. Frankincense Hydrosol can be used daily as a refreshing skin-toning facial spray that will leave your skin with noticeable softer, more delicate texture. Boswellia Hydrosol can also help deepen breathing by opening the airways, drying mucus in the lungs and expelling phlegm. Although dilution is still recommended for children and pets, hydrosols are less concentrated and therefor do not need dilution for use. The hydrosol can also be used to prepare the mind for prayer, meditation or yoga. The fresh scents deepen the breath and helps the heart connect with peace. Meditation sprays containing the hydrosols, aids us in finding the solace many of us need in our stressful lives. How do I use Frankincense Hydrosol? As a toner Combine 50ml Witch Hazel (non-alcoholic), 25ml Rose Water and 25 ml Frankincense Hydrosol in a 100ml spray bottle. Spritz on a clean skin after cleansing to balance and hydrate the skin. A few drops of your favorite essential oil can also be added should you prefer. Oils that are beneficial to the skin includes Carrot Seed, Sandalwood or Sweet Orange to name a few. Always shake well before use when adding Essential oils. As a compressor Since Frankincense has healing and anti-inflammatory properties, it aids as a compressor to relieve the pain from wounds or injuries. Place a washcloth in a bowl of cold / hot water for a cold / hot press, pour 100ml of Frankincense hydrosol in a cup and saturate the wash cloth. Wring out the excess liquid and apply the cloth in a desired area. The press will speed up the healing process. As a face mask Add Frankincense hydrosol to Bentonite Clay to form a natural mask. Add 1 tbs bentonite clay with 2 tbs of Hydrosol to form a soft paste. Apply liberally with a mask brush over your skin and wait approximately 5 minutes for the paste to dry, then wash the clay mix off. It is important to note that the mask must not be left on too long, as Bentonite is a volcanic ash and needs to be used with care (Longer is NOT better) and always only use wood, plastic or glass. Please do not use metal utensils with Bentonite Clay.
Hallo GOOD DAY WE SELL - SUGAR ICUMSA 45 HIGH SEAS CARGO we have ready vessel high seas PRODUCT - ICUMSA 45 SUGAR , BRAZIL ORIGIN - quantity - 25000 MT, 50000 MT, 75,000 MT and 100000MT All are floating vessels we can offer good price Can divert to Ghana , Other African Ports, Asian ports or any other safest ports Only genuine buyers who can provide BCL may approach - if terms and price OK we can conclude the deal quick NO TIME WASTING PLS PROCEDURE For the 2 ships of 25,000 mt each ICUMSA 45 sugar FLOATING VESSELS Quantity : 50000 MT The procedure is simple 1 . ICPO from final buyer to us + BCL (recent screenshot of your bank statement)+ CIS 2. Seller issues SPA + PROFORMA invoice 3. The buyer signs contract + Proforma invoice 4. Buyer open his MT 103/72 5. After the bank notice to the seller, bank prepare the document for shipment within the time provided by the buyer and send the documents through the CAD channel 6. After confirmation, the seller ship to buyer destination WARNING: no fill will be read, processed or accepted without fund evidence. Vessel Details
Fibre Fill Polyester Filling Microfiber Fiber 0.9d Down Like Virgin Micro Gel Fiber Hot Sale Virgin Down Like Polyester Fiber filling fiber hollow conjugated fibers recycled polyester stuffing fiber 1) Denier:0.8D-1.5D 2) Cut length:22MM/25MM/32MM/38MM/51MM/64MM/71MM/76MM 3) Luster:raw white Virgin and recycled grade 4) Siliconized and no siliconized 5) Merits: high intension, stable stretch elongation, highly elastic, puffed, high ratio of hollowness 6)Excellent fluffy performance, pleasing hand feeling, plump, gentle, luster 7) Usage: suitable for filling toys, pillows, cushions, and other products need to be filled ; make pearl cotton. bedclothes , man-made fur, filler materials, sofa and others 8) Weight: around 300kgs/bale 9) Package: woven bag Container load: around 34 bales for a 20GP,around80 balesfor a 40HQ 10) Delivery Time: within 15 days after receiving the deposit
Product name: Hexapeptide-10 Other Name: serilesine; H-SER-ILE-LYS-VAL-ALA-VAL-OH Molecular Formula: C28H53N7O8 Molecular Weight: 615.76 Appearance: White powder Purity: >98% CAS NO.: 146439-94-3 Package: 10MG/bottle; 1G/bottle; 5G/bottle Supplier: ZHENYIBIO Hexapeptide-10 comes from the adhesion sequence of laminin,which restores the structure of the skin.Serilesine is a firming active substance that promotes the dual cell activity of keratinocytes and fibroblasts.Serilesine hexapeptide 10 increases the synthesis of laminin 5,�±6-integrin and semi-liposomes,thereby enhancing the dermal-epidermal junction.Hexapeptide-10 can reshape,replenish,firm and elastic skin,and restore its fullness.The skin is restructured and replenished (the skin density increases by 19% after 2 months), becomes firmer and more elastic,and restores fullness.
Zingiber Officinale (Ginger) Root Oil / Aceite esencial de jengibre fresco / Huile essentielle de gingembre frais / Minyak Jah Cas No 8007-08-7; 84696-15-1 EC No 283-634-2 FEMA No 2522 Product Synonyms : minyak jahe, jahe amprit, emprit, rhizome, root, Ginger Oil Fresh, frais, gingerbread, jahe gajah Olfactive Profile : Warm, spicy, pungent, peppered, woody, earthy, sweet, citrus/lemony odour Ginger is a knotted, thick, beige, underground stem also known as rhizome The stem extends roughly 12 inches above ground with long, narrow, ribbed green leaves coupled with white or yellowish-green flowers Ginger has a slightly biting and hot note. it's aroma is rich, sweet, warm and has a distinctive woody olfactory note
CASHEW NUTS Available in different grades, Cashew Nuts come in different size packaging. The Cashew Nuts are well acknowledged for their freshness, long shelf life and natural taste. Further, Cashew Nuts are packed in food grade material to prevent them from biological contamination. Grade cashew nut : WW 210, WW 320, WW240, LP, WS, W450, LBW, SW320, SW, WB, SS 1. Grade: W240, W320 - Moisture: 5% Max - Broken: 5% Max - Melasma: 3% Max - Mould and fungus: 0% - Admixture: 1% Max - Silk sell: 3% Max - Dent rate: 3% Max 2. Grade: WS - Moisture: 5% max - Foreign matter : 1%max - Broken: vertical broken - Live insect and larvas: Negative - Coliforms, salmonella: Negative 3. Grade: LP - Moisture: 5% Max - Melasma: 3% Max - Admixture: 1% Max Live insect and larvas: Negative - Coliforms, salmonella: Negative Other Details : Packaging : In vacuum bag or tin box Delivery : 25 days after down payment Color : White light ash Style : Dried
Physical properties 1. Appearance: No residue at 40 deg. C 2. Cold test: Min.48 hours at 0 deg. C 3. Colour: Max.1.2 red, lovibond tintometer 5/20 inch 4. Refractive index:1.465-1.475 at 40 deg. C 5. Density:0.91-0.92 g/cm3 at 20 deg. C 6. Volatile matter: Max.0.07 % at 105 deg. C 7. Taste : Excellent 8. Odor : None Chemical specifications 1. %free fatty acids (ffa): Max 0.1 2. % ash (*): Max.0.05 3. Saponification value:190.32 koh/g. Of oil 4. Iodine value:134.13 (wijs-hanus method) 5. Peroxide:0.2 meq/KG. Of oil 6. % soap:0.0005 7. % unsaponifiable matter: Max.0.12 8. Impurities: None 9. % saturated fat(-ty acids):8-12 10. % unsaturated fat(-ty acids):87-91 11. Feeding energy:900kcal 12. Iron : < 0.02 mg/lt 13. Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25
1. Raw Material: #1 Grade Pecan Pieces which meet or exceed requirements for grade as specified by the SGS. 2.Count/Pound: 251-300 3. Size: 85% Minimum Halves (Including �¾ halves)1% Maximum through through a 8/64â?? Round Hole Screen 4. Color: Light Amber to Amber 5. Tolerance: 3% defects including 0.5% for rancidity, mold, decay, insect injury or serious damage caused by shriveling, leanness, or external discoloration. 6. Foreign Material: 0.05% 7. Aflatoxin
