Diesel EN590 10 PPM is a type of diesel fuel that meets the European standard EN590 for automotive diesel oil The 10 PPM designation refers to the maximum allowable sulfur content in the fuel which is 10 parts per million ppm or less Here are some of the specifications for Diesel EN590 10 PPM Density at 15 C 820845 kgm Flash point minimum 55 C Cetane number minimum 51 Sulfur content maximum 10 ppm Distillation range 90 distilled at 360370 C Cold filter plugging point maximum 5 C Appearance Clear and bright free from visible sediment and water Diesel EN590 10 PPM is primarily used as a fuel for diesel engines in automobiles trucks buses and other vehicles It is designed to meet the stringent emissions standards in Europe and other regions which require lower levels of sulfur and other pollutants in diesel fuel The use of lowsulfur diesel fuels like EN590 10 PPM can help to reduce air pollution and improve air quality as well as reduce the emissions of greenhouse gases
DIESEL EN 590 10 ppm Quantity: MINIMUM 20.000 MT MAXIMUM 200.000 MT X 12 MONTHS Price - $240 / 230USD Gross/Net ,per MT CIF ASWP Price - USD 220 / 210 $ per MT On FOB Basis : Novorossiysk/Vladivostok/Rotterdam/ Primorsk
DIESEL EN 590 10 ppm Quantity: MINIMUM 20.000 MT MAXIMUM 200.000 MT X 12 MONTHS Price - $240 / 230USD Gross/Net ,per MT CIF ASWP Price - USD 220 / 210 $ per MT On FOB Basis : Novorossiysk/Vladivostok/Rotterdam/ Primorsk
100000 mt fob Rotterdam available every month
SUPPLIES : Product: Diesel EN 590 10 PPM Product Code: GTQDC-EN590 10 PPM Shipment Terms : CIF ASPW Payment Terms: LC/TT MOQ/Contract: 100,000MT
Commodity: EN590 / JetA1 / D6 Price Term: $580.00 / $88 / $0.99 Delivery Terms: FOB Dip & Pay, FOB TTT, Tank Takeover, and Tank to Vessel (TTV)
Non-sanctioned, FOB Rotterdam, FOB Fujairah
Diesel Powering your journey with efficiency and reliability. Our premium diesel fuel is designed to optimize engine performance while minimizing emissions. With a blend engineered for maximum power output and fuel efficiency, it\'s the smart choice for drivers seeking both performance and environmental responsibility. Whether you\'re hitting the highway or navigating city streets, trust our diesel to keep your engine running smoothly mile after mile.
Product Description D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names Price of product ( USD price or FOB price) : USD 0.65 - 0.70 per Gallons Product origin : Russian Key Specifications/Special Features : International Standard Minimum Order Size and Packaging details : 10000000 Gallons
* Quantity MIN 100,000MT x 12 months * Origin: Russian and other country, we have 10 countries factory suppliers. Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: The price we can discuss. Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
PRODUCT: 10PPM DIESEL FUEL EN 590 QUANTITY: Min. Quantity: 10,000 Metric Tons Max. Quantity: 300,000 Metric Tons Per Month DELIVERY: ON FOB COUNTRY OF ORIGIN: KAZAKHSTAN TERMS OF PAYMENT: MT103 PORT OF DISCHARGE: ROTTERDAM/HOUSTON FOR ORDER
Origin: Russia Quantity: 10 000 MT/per month / 100,000 MT per month
EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles. SOP to purchase: 1. Buyer Issue LOI. 2. Seller Issue SCO. 3. Buyer confirm on the SCO and issue an official ICPO. 4. Seller issue draft SPA and Letter of acceptance to buyer and buyer accept and counter sign return to Seller. 5. Seller reviews signed contract, register and legalizes the contract with the appropriate Authorities on Seller's expenses. 6. Seller releases to Buyer the Legalized SPA and below listed Partial POP Documents. (a) Refinery Commitment to Supply (b) Certificate of Origin (c) Statement of availability of product (d) Product quality passport (Analysis test Report) (e) Export License. 7. (a) Buyer issues SBLC swift MT760 or DLC swift MT700 within Seven (7) banking days to seller; (b) If buyer fails to issue SBLC swift MT760 or DLC swift MT700 in 7 working days, Buyer shall make guarantee deposit of 3% TT Wire from total value of the Contract to seller's. 8. (A) Upon confirmation of buyer's SBLC swift MT760 or DLC swift MT700 or guarantee deposit of 3% TT Wire to seller's nominated bank, seller issue Full POP and Shipping Documents and 2% Performance Bond via SWIFT bank to bank as shown below: (a) Bill of Lading (b) Vessel Tanker Q88 (c) Fresh SGS Report (d) Charter Party Agreement (e) Ownership Certificate (f) Title Transfer Affidavit (g) Product Allocation Certificate (h) Ullage Report (i) Cargo Manifest (j) Notice of Readiness. (B) All Parties involved signed the NCNDA/IMFPA. 9. Shipment commences as per contract schedule. 10. Upon arrival at the discharge port, the cargo will be subject to CIQ/SGS inspection at the Buyer's expense. Upon completion of CIQ/SGS inspection, the Buyer makes 100% or 97% payment via MT 103- T,'T wire transfer within 72 hours from issuance of CIQ/SGS certificate at discharge port. ICPO should provide / state - -- 1 ) Price , 2 ) Procedures , 3 ) Buyer banking details , 4 ) Buyer Company registration copy 5 ) Buyer passport copy of Director / Signatory 6 ) Buyer co profile , 7 ) Buyer specifications 8 ) Any other Import Permits and TSA .
Hello Buyer/Buyer Mandate, I am direct mandate to end seller/refineries here in Russia Federation, our refineries can supply to you/your buyers it's products, PETCOKE,M100, D6,D2,JETA1,AGO,LCO,ESPO,JP54, LNG, LPG,DIESEL FUEL EN-590 ULSD, without any delay nor complication.
Aluminum ingots, copper ingots, copper cathodes, magnesium ingots, zinc ingots, lead ingots, sugars, flour, rice, saffron, frozen beef products, frozen chicken products, frozen chicken paws, frozen prawns, frozen shrimp, coffee, cocoa, soybeans, corn, jet a1 fuel, diesel, urea formaldehyde concentrate, latex concentrate (ha), concentrated sulfuric acid (h204 98%, thermal coal .Manufacturing services, wholesaler, procurement services, importer, exporter, shipping, logistics
The dealer company is looking for partners to enter into an annual Contract for the purchase of diesel fuel EN 590 10 ppm produced by countries that are not under sanctions, in volumes from 25,000 to 100,000 tons per month. Total quantity: 300,000 - 1,200,000 tons per year; Delivery terms: CIF sea ports of Tallinn (Estonia), Rotterdam (Netherlands), Mersin (Turkey) and Fujairah (UAE); Payment terms: DLC (MT700); Price: $600 - $650 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Delivery time: shipment of the first batch within 10 days after issuing the letter of credit. Contact person: Nik
The dealer company is looking for new customers - Buyers for the conclusion of annual Contracts for the sale of diesel fuel EN 590 10 ppm produced by countries that are not under sanctions, in volumes from 25,000 to 100,000 tons per month. Total quantity: 300,000 - 1,200,000 tons per year; Terms of delivery: CIF ASWP; FOB - sea ports of Rotterdam (Netherlands), Mersin (Turkey), Fujairah (UAE); Payment terms: DLC (MT700); Price: $650 - $680 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Delivery time: shipment of the first batch within 10 days after issuing the letter of credit. Contact person: Nik
The dealer company is looking for Buyers for diesel fuel EN 590 10 ppm produced in Azerbaijan in volumes from 5,000 to 15,000 metric tons per month on EXW terms, Klaipeda Sea port terminal (Lithuania), according to Incoterms 2020. Total quantity: 5,000 - 180,000 MT per year. The first batch is trial, with a possible extension of the Agreement for 11 months; Payment terms: DLC (MT700), irrevocable, divisible, transferable; Price: $670 - $680 per ton; Product quality: European Union standard EN 590; Inspection: SGS/equivalent; Performance guarantee: 2% of the nominal value of the monthly delivery by the Seller's Bank to the Buyer's Bank; Delivery term: within 20 working days from the date of issue of the letter of credit by the Buyer. Contact person: Nik
The dealer company is looking for a distributor of an oil refinery to enter into an annual Contract for the purchase of diesel fuel EN 590 10 ppm, of Qatar or Saudi Arabia origin in the amount of 30,000 MT per month. Total quantity: 360 000 MT per year; Terms of delivery: CIF seaport Tallinn (Estonia), Klaipda (Lithuania); Terms of payment: DLC (MT700); Price: 380 $ tons; Product quality: European Union EN 590 standard; Inspection: SGS/ Equivalent; Delivery time: shipment of the first batch within 10 days after issuing the letter of credit. Contact person: Nick